HP16-ac-106na: screen black when turned on

Similar Questions

• Edge 530: Screen black when turn

  I just got a 530 Edge. The screen is black when I turn on. The solution is to press and hold the Fn + F1 keys. It takes me to the configuration. When out to configure the machine starts normally. Anyone who knows how to fix this?

  No, did not help

  I actually describe the bad workaround solution: I don't have to press Fn + F1. Simply start the machine twice.

  On the first time: the fan starts and the red light comes on, but the screen is completely black (no backlight, no noise, nothing)

  Off: Stops immediately

  On the second time: starts normally

• Random computer screen Black-out / turn off.

  Hello

  first is my laptop: HP Pavilion dv6-6160se Entertainment Notebook

  the problem now

  A few days ago my laptop screen started off sudden shutting down/turn black (no lights at all). This was happening when using the laptop randomly. The screen had no lights, and if I use a flashlight on it there is nothing. like his turned to the wide completelly.

  Before that happens. THS behavior varies. Sometimes, she Shimmers from my office to a black screen then back on and sometimes not. Most of the time screen replaced by a green of radom (for most) and then goes black / shuts down.

  NOTE: The laptop keeps runing, I can hear the videos playing then it is probably not a chip gpu or problem gpu, music and games.

  I searched on the web for all sorts of reasons this could happen and tried a few fixes.

  Here's what I've tried and all or the details I could accumulate in Cup for days:

  1. If the screen flickers, turns off and then turns on I get a message that gpu drivers stopped working and valued (on amd and intel).

  2. If the screen turns off, on the rare occasions if you close the lid of the laptop and leave the laptop to go to sleep, when to wake up to the screen works again (noticeable because of the screen moving)

  3. I tried to install 4 different drivers, all with clear install. (did not work)

  4. I tried to recover the system with the restore point. (did not work)

  5. I tried to turn down the brightness of the screen. (did not work)

  6 tried this trick:

  1. Turn off the laptop
  2. Remove the battery
  3. Hold the power buttong for 30-45 seconds
  4. Plug the charger (do not put the battery in)
  5. Turn on the laptop and see if it works.

  Very sensitive details:

  7. given that on rare patches requires to move the lid I tried to shake the screen a little or by slightly pushing from different directions. Actually, this does the trick and back lights up the screen (I have right now typing this after using this 'trick')

  So, with this as a hint, there are a few things that I have in mind but I don't know and need help because I am not a technician.

  (a) there is a LCD cable and when I hit a small vibration upped it and ends in a black screen.

  (b) I have read that if you use a flashlight and you can't see your desktop he means that it is a bad converter.

  (c) the inverter can cause a cabe lose instead of the LCD?

  It's all the comments that I could give you that I remember now.

  Currecntly the screen seems ok (this is the angle of sure there once I moved it and I would aprecciate quick response until it goes black again so maybe)

  EDIT: Tried to play a game for a few minutes and I got the black screen again. Closed the lid and the laptop goes into mode 'sleep' then opened it and it worked. Just for the records.

  EDIT #2: Just tried to play a game again. got the blackscreen, shaked the screen a little bit and it worked, but for the 1st time that I get the message "the demand has been blocked access to the graphics hardware," it may be it's the GPU after all or drivers maybe?

  EDIT #3: Tried to replay a game and it seems to trigger the problem. (I am currently under the laptop with only drivers intel installed)

  Thanks in advance

  Sincerely,

  NTAS

  PS Please do not hesitate to ask me any questions, if you would like more information, I'm not a laptop expert, but I know more than the average

  Hi @Ntas

  I read in your post and it seems there are two possibilities, and I noticed that you have already tried several things that I would normally say.

  I will, however some of these links post anyway for you to review, it is still possible, there may be something in one of them that have been missed or can inspire an idea of the cause. Since you mentioned that sometimes simply move the screen will cause the problem or do disappear, that seems like a loose connection, or maybe something like a pressure on one part of the screen, causing the problem.  Of course, that last part may simply mean that the display is not to his last breath, but if all goes well.

  First I will give you a link for the service manual to help you control connections. Just be careful to read the sections on precautions, protect you and to prevent further damage. This manual is also useful in that it lists all compatible parts, so if the display is faulty you can use this guide to help control a compatible replacement if you choose to do so. HP Pavilion dv6 Notebook PC - Maintenance and Service of Guide

  Here are a few other sources, which can be useful for you.
  Problems related to laptop (Windows 7 and Windows 8) displays
  Diagnose a display LCD (LCD) for damage

  Also, for you convenience here is the page of the drivers for your laptop.
  HP Pavilion dv6-6160se Entertainment Notebook PC Drivers

  I hope this helps at all.

• Screen distorted when turned on Satellite U405

  Hi all

  I hope someone can help me with what to do - I bought a Satellite U405 laptop in the United States last summer (June 2008) and I used it fine until last week. When I turned on the other day, I got this on the screen - http://i34.tinypic.com/20ixjli.jpg and http://i34.tinypic.com/2j32ngx.jpg for a second opinion.

  What can cause this problem and how can I solve this problem?

  Hello!

  It seems that the internal screen is broken and needs to be replaced.

  You can fix that if you replace the screen by yourself or you go to an authorized service provider. Exchange of the screen is a little tricky and you need very careful. Also a lot of screws must be removed, so this should be done to professional people.

  I recommend you contact an authorized service provider that you can find on the Toshiba site. They will help you.

  Good bye

• Why do Satellite A100 screen flashes when turned off?

  Hello
  I have a toshiba A100, Go 7600 Gpu, just bought there is two weeks and im very pleased with the quality and performance far :), just noticed one thing today, the room was turned off and the laptop turns off with the screen in open position, I leave it open normally when at home, I noticed that the screen flashes as fixed every 1 min in what appears to be an interval of time with or without AC connected, not a flash very bright but not easy to notice, but I'm sure the flash, so my question is should I worry about this? Thanks in advance :)

  Hello

  What do you mean with the screen? The LCD internal? Maybe you didn t stop the machine itself.

  I also suggest you update your bios and your drivers, maybe it s just a software related issue...

  Here´s a link to find the bios and latest drivers for your computer:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Give some information about this case, could be interesting, what problem is.

  See you soon

• Yoga 14 700 screen white when turned on

  When I turn on the computer, I see the Lenovo logo. After that, the screen turns off but the backlight is always on. Everything on the computer still works except the screen. I tried to connect to an external monitor and a projector, but they both do not detect the computer. My model is the i7 and nvidia graphics. That this has something to do with faulty nvidia drivers?

  Looks like a problem with Windows Me. In fact, it can be also a Nvidia driver problem. I would say OneKey recovery to solve the problem. To do this, hold down the key of Lenovo OneKey recovery on your computer. Here is some information about the OneKey recovery, alias Novo button button. https://support.Lenovo.com/us/en/documents/ht062552

• Pavilion HP P7 - 1000: screen white when turned on

  When the PC is turned on the monitor responds with a green power light, but remains empty, the PC power light turns on and stays on and the HARD drive light comes on and then disappears. Mouse and keyboard do not respond at this stage. Fans are market HDD is running more DVD ROM lights up when it is started. I tried different hard drives and if you start without a HARD drive there still a blank screen. I also replaced monitor, keyboard, mouse. The real kicker is that from time to time after a lot of power downs and restarts it will boot to the BIOS and load the MBR and everything will be fine. I see that no error it connects.  Any ideas would be apresiated. Thank you!

  I think I got it. The person who is the owner of the PC, said that one of the two USB ports was damaged so I unplugged the two front holes in the motherboard and it works very well and it seems to be faster starting now as well. I must say that this one had me stumped good.

• SCREEN BLACK WHEN INSTALLING WINDOWS 8.1 OR WINDOWS 10 PRO

  Hi there have a good day? My cousin to slide my phone accidentally and when try to open my laptop I get this message "No Bootable Device" so I download an iso file on my usb key to create the creation of media, but when try to install on the laptop it goes black screen. :(vous avez besoin d'aide dès que POSSIBLE)

  PS MY LAPTOP IS

  E5471G ACER E14

  INTEL CORE i5

  PPS. SORRY FOR MY BAD ENGLISH

  Hello

  Test your hard drive:

  Go to the website of your computer manufacturer > search your computer specifications > know brand of hard drive > access the Hard Drive manufacturer's Web site > find and download hard drive Diagnostic software and make a record of start of it on the computer that you use to get here, following their instructions > test your hard drive to see if it has failed.

  And you can also use this method to test your hard drive:

  "SeaTools for DOS.

  http://www.Seagate.com/support/downloads/SeaTools/

  "SeaTools for BACK tutorial.

  http://knowledge.Seagate.com/articles/en_US/FAQ/201271en

  See you soon.

• My envy 100 D410 running with OS 10.7 produces only one screen black when scanning or copy? Help

  My envy 100 D410 had worked fine for several months.  Recently, the printer works fine but the copier and scanner only produce black and streaked color screens.  I reloaded all drivers and updates, and nothing seems to help.  Any help would be greatly appreciated.

  If the printer performs this when the copy of the front of the printer, the scanner is dead.  I'm sorry.

  Here's how to contact HP technical support: www.hp.com/go/totalcare

• To monitor screen black startup even when turned on.

  Hello, John Sherman,.

  Your question about the Microsoft community received a response from stephanie Podder.

  Title: to the start screen black screen even when turned on.
  Response

  Hi John,.

  It has long been that you have filed your application. Are you still experiencing this problem?

  If so, let us know we will be happy to help you!

  For stephanie Podder: yes I always face this problem. I need help.

  Read this answer on Microsoft Community

  Hi John,.

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem can occur because of driver settings or registry corrupt display.

  I suggest you use the steps in this article and check if it helps.
  Reference:
  Why my screen is black when I start Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Important notes:
  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

  When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Get black screen whenever I turn on computer

  I cheated with F2 and changed the boot device Configuration, first boot HDD & F1 device and accesses windows like that but it still does not start automatically whenever I turn on the computer, I have to hit F1 on the screen black continue

  Hi StressedMom,

  ·         Did you do changes on the computer before the show?

  I suggest to return the item and check if the problem still persists.

  Why my screen is black when I start Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Note: The article also apllies for Windows Vista as well.

  I hope this helps.

• my screen goes black when I connect and when I try ctrl alt del it don't work

  my computer of solid work for the 1 year I got it but not when he just started having problems when I try to connect normally, I sign, but then the screen goes black and all I see is a slider and I try Ctrl-alt-delete but an error msg appears saying: I can't get to the settings of Microsoft security I tried running a virus scan , but it was cancelled way quarter in I need help

  Hello

  Did you do any changes to the hardware or software on your computer before this problem?

  See the methods:

  Method 1:

  Why my screen is black when I start Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  See also:

  Windows Vista and Windows 7 black screen on computer unlock

  http://support.Microsoft.com/kb/2431700

  Method 2:

  Launch the virus in safe mode with network scan.

  Step 1:

  Start your computer in safe mode with network.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  NOTE: see 3 from the link above, Advanced options boot (including safe mode).

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Select Mode safe mode with networking.

  Step 2:

  I suggest you run an antivirus scan using the Microsoft Safety Scanner to confirm that your computer is free from any infection by the virus. Please find the link below.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection.

  Hope the information is useful.

• Computer HP dm4-1160us laptop - does not work - has a white when turned on screen.

  Computer HP dm4-1160us laptop does not work - it has a screen white when turned on.

  See this page for "no starup" advice, if none of these tips help, the laptop will need professional diagnosis.

  Go to this page, select "Error Messages displayed on the computer"

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=43716&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=4308941

• Screen black, but still clocked

  Hello, I have a problem. I'm using Windows 7 home edition. and that's the problem. This happens for 2 weeks, I was chatting with my friend, all of a sudden my screen went black, but my CPU still running. then I restart my computer, after the turn of the cpu on a couple of minutes later (5-15 minutes) the screen went black again. my anti virus do not show any threat, and after the black screen, I can't press CTR + ALT + DEL to Task Manager to get out. but then the still CPU running. Please help me

  Hello

  Why my screen is black when I start Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  References to Vista also apply to Windows 7.

  No registration necessary data and re - install Windows 7 might be the best option, but here are a
  few others.

  You can save your files by putting the drive in another computer or an external hard drive enclosure, then
  saving them. Do this using several methods to redundantly. Of course, a real computer
  Shop or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel
  -Double click - Driver tab - click on UPDATE driver - device Manager - map - graph
  then right click on the device and UNINSTALL - REBOOT.

  A method to try to get to the desktop (try in normal Windows Mode without failure) is CTRL +.
  ALT + DELETE - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is available by
  repeatedly tapping F8 as you start. CTRL + SHIFT + ESC also begins the Task Manager.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all hotfix is usually a hit or miss
  base. That there is no information on a black screen as there is just a blue screen
  adds to the difficulty. Often using a restore point or Startup Repair will have no effect.

  You can try a google to see the proposed repairs, whom some have worked however these
  cover a wide field of efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a window 7 disk? You can try restoring the system to it. If you do not have the
  discs, your system manufacturer will sell them at low prices. Or try in safe mode if you can get
  it.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  You can create a recovery disc or someone else use same version (to do the system restore
  It only needs to be bootable).

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ------------------------------------------------

  These require good Windows 7 drives (especially if you can not start safe mode).

  Try the Startup Repair tool-

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  Try Repair Options recovery or a Windows 7 boot disk system

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  If nothing works, you can do a repair installation.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Windows 7 boot disk:
  (type in a single line or copy / paste a line at a time and then press enter - do not type)
  parenthesis or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Get an error message when turning on the computer, then just get a black screen after the message saying cannont find script file c:/windows/run.vbs

  Original title: windows does not

  I have windows 7 and get an error message when turning on the computer, then just get a black screen after the message say cannont find script file c:/windows/run.vbs

  What can I do?

  Enter your bios usually with keys F2 or delete to the first powered

  Use default Optimize can be the F5 key and save and exit,

  Insert your installation disc or flash media and press F8 or F12 to boot on it

  Then use the recovery tools to run the Startup Repair tool.

  http://Windows.Microsoft.com/en-us/Windows/Startup-Repair-FAQ#1TC=Windows-7