HP4284A scanning frequency with frequency points read from a separator: excellent tab or file lvm

Similar Questions

• Slow opening Excel file with MACRO and links from network on the Desktop view file server compare to physical PC

  Hi guys,.

  It's a weird thing.

  I just encountered a very strange problem when you open one of the excel files located on a Linux Samba Shared running file server.

  My laptop physics has a Dual Core 2 Duo 2.27 GHz, 4 GB of RAM and Windows 7 Pro 32-bit.

  My Desktop view has 2 vCPU (UC from host to 2.99 GHz/Core with base 16), 4 GB of RAM and Windows 7 Enterprise 64-bit.

  Note: The Desktop view is located on the FusionIO card locally on the server, so it is lightning fast.

  When I open excel file from my physical office, need you 3 seconds to open and 5 seconds to enable the content (because it is a big xls file with a bunch of MACRO and LINKS to a different worksheet)

  When I opened that same excel view Desktop file, it takes you 18 seconds to open and 1 minute to activate the content.

  Anyone happened to have the same problem with their environment to experience?

  Do you mind sharing some tips to solve this?

  Finally, be able to locate the problem.

  It was Sophos EndPoint AV for vShield that I deployed for assessment.

  Once I turned off politics, everything is back to normal.

  Couldn't believe that via vShield endpoint was causing all this because I tried Symantec and BitDefender for vShield before and no problem at all.

  Well.

  I hope that Sophos or VMware vShield team has a solution for me.

  Nice day!

• What is a red dot with exclamation point average

  I have windows XP and lately the red dots with exclamation points appear on more and more of my file icons.

  They appear in the lower right of the icons of file.  I see no difference in functionality, but he fears that

  I have no idea what it means, and it is spreading in addition to my files.  What does that mean?

  You have some sort of software to backup installed, for example, Carbonite, Mozy, Norton 360?

  Many of these applications use overlays on file icons to indicate the status of the backup.  What you describe sounds like Avast! Backup--> https://support.avast.com/index.php?_m=knowledgebase&_a=viewarticle&kbarticleid=1000#idt_0108

• High with NEITHER 5673E scanning frequency

  Hello! I want to use the generator NOR 5673E. In the examples, I found the "scanning frequency" example for 5673E.

  My question is: what is the maximum speed of the generator can sweep. How to estimate time frequency of scanning program? For example, I have the range of frequencies from 2 GHz to 3 GHz, step 1 MHz. how long will it take? What is the shortest time as possible

  with the scan step frequency = 1 MHz, 0.1 MHz? Milliseconds, microseconds can nanoseconds?

  Hello

  On your SMU-5673E RF list mode will be the most effective approach for your scanning application.  The smallest you can get the duration of the step is 5 US on this material.  However, the speed at which you scan should be a factor of your specific needs, such as the frequency and accuracy of power (more adjustment time necessary for better performance).  Larger step sizes will require tuning more time for equivalent performance.  It is also interesting to note that the maximum amount of steps (limited by the amount of memory on-board) in the list view is 250.  This means that you will need to reconfigure your scan after 250 MHz (1 MHz/step * 250 not) in the software.  At this point, your total scan time will depend on the performance of your computer.

  I would recommend that you take a look at the SMU-5673E sheet beginning on page 5 learn more about tuning time.  Also, here is a link to obsolete documentation, we have online for RF list Mode:

  List of configuration - http://zone.ni.com/reference/en-XX/help/371025K-01/TOC112.htm

  For the most complete documentation and up to date on RF list Mode, please see the help of your computer RFSG documentation.

  Kind regards

• How to find the sampling frequency to read the measurement file

  Hello

  I would like to find/extract the sampling frequency of a .lvm file.

  Right now I am using the VI 'read file of measurement' and my data charge fine and all, but I need the frequency of sampling for certain calculations.

  I know the header of the file .lvm that the sampling frequency is 1613Hz, but I want to get this automatic information from the open file .lvm.

  Tried to find an express vi that could give me the answer, but I could not find a

  I'm sorry if this question already answered, but I could not just to find the answer.

  I hope you understand what I'm doing!

  Thank you

  Kind regards

  Tommy

  The timing is part of the production of signals information. Never use the functions of the Express, but you can use DDT to and convert to one of the data types of waveform. Waveform components then turns the dt.

• I installed my Canon PIXMA MP600 with the latest drivers from the Canon Website, but the printer doesn't scan.

  I installed my Canon PIXMA MP600 with the latest drivers from the Canon Website, but the printer doesn't scan.  It prints very well I can't scan and save.

  I can't find the printer drivers specifically for Yosemite on the Canon website.  How can I get this analysis and save them?  I have never installed this printer on my iMac.

  Have you tried the Applications/Image Capture or VueScan?

  VueScan

  VueScan FAQ

• All of a sudden my 5.7 LR on win10 64-bit start fails with the error message something like "error reading from the cache of the preview... Please restart." reboot, repair, reinstall, or rename SLCache helps to repair.

  All of a sudden my 5.7 LR on win10 64-bit start fails with the error message something like "error reading from the cache of the preview... Please restart." reboot, repair, reinstall, or rename SLCache helps to repair.

  

  Hello

  Greetings!

  Close to Lightroom.
  Navigate to the location where the catalog is present (default value is within the pictures folder lightroom file)

  And delete the file previews.lrdata.

  Note: do not delete the catalog with the extension .lrcat file.

  Concerning

  Jitendra

• Hi I godt 2 Questions: 1) my Adobe PhotoShop elements 10.0 for MAC cannot read taken with the new Canon 7 d Mark II camera RAW files. (2) my Photoshop Elements changed from Danish language of German language, how do I put this back?

  Hi I godt 2 Questions: 1) my Adobe PhotoShop elements 10.0 for MAC cannot read taken with the new Canon 7 d Mark II camera RAW files. (2) my Photoshop Elements changed from Danish language of German language, how do I put this back?

  1. you have cr 8.7 or better: use the dng converter or upgrade your pse in v. 13.

  2 mac App Store version is German. Photoshop Elements

• How to write constantly to analog output and read from analog inputs

  Hi all -

  I had a question about writing continuously to analog output reading simultaneously an analog input.

  It's my first time to post a message to the community, so please let me know if I made mistakes.

  I use Labview 2011 with a NEITHER-DAQ USB 6215.

  I'm looking to generate a waveform and write it continuously in an analog output. It is then connected to an entry on the acquisition of data, where I am trying to sample the analog signal. (I realize, there is a system of trivial, but I'm hoping to build on it once I have run).

  The task of reading from the analog input works fine, as I tested it in several other cases. I have a problem writing to the analog output.

  For this task, I tried to follow the "Gen Cont Wfm Clck Int' VI to generate the wave form and start the task. I then try to write to the output of the analog timed loop. However, it does not seem to transmit a signal and doesn't give me any errors.

  I have attached the VI but also a screenshot.

  Please let me know if anyone has any ideas. I would really appreciate the help!

  Thank you

  Peter Borgstrom

  We will review your tasks one at a time.  First of all, the task of generation/Analog output Waveform.  Generate you a waveform (I'm unsure of your VI if it is a fixed waveform or not) and send it to a defined output function to produce a waveform continuously, using N-channel and samples of N (where you set not these previously).  You should not put this inside has timed loop, as the DAQ hardware has its own clock - if you simply put it in a while loop (with a stop to break out of the loop), the loop will call the function for the first points of N, wait until all N have been taken out, then call it again to another N points (up to what you press Stop).

  Now, suppose that you have the output connected to a load voltage (say a decent resistance).  You can wire the input terminals of your A/D converter through the same load and set up a similar analog input loop, running in parallel (i.e. in its own independent of the OD loop, while loop).  You pourriez start together (with, say, a merged error since the initialization code line loops HAVE and AO become lines of error in "loops of sampling" described above), but you might want to delay loop (a little) the AI so that the OD has a chance to set the voltage before the bed.

  I hope this helps.

  BS

• My camera Olympus only works with Apple's Quick Time 7. Is it possible to make it work with my operating system from Windows XP?

  My camera Olympus only works with Apple's Quick Time 7.  Is it possible to make it work with my operating system from Windows XP?

  Apple QuickTime 7 works is because. MOV is the Apple
  QuickTime format.

  QuickTime. MOV files can cause problems with Windows Media Player.
  And... If you plan to try editing with Movie Maker... the files should
  be converted to the. WMV format.

  No guarantee, but the following decoder might allow Windows Media
  Reader to read your. MOV files. Only problem is... it is not freeware to retail.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  3ivx MPEG-4 5.0.4 decoder
  http://store.3ivx.com/3ivxStore/product_details.php?ID=11

  Convert the. MOV files to the. WMV format may be worth a try:

  There are many converters available on the net... some
  free... some detail.

  The following freeware converter is just one example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster download)
  (the file you want to download is: > FFSetup295.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the final screens)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag > FFSetup295.exe< out="" of="" the="">
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck

• Cannot control windows, disappear with mouse point

  Why windows minimize whenever I point the mouse on them? When wants to close a tab, press the button to open the window so I can point the mouse to close the tab. Sometimes even that does not work. Even if the opening of the taskbar. Choose a window to open it and then move to the window but it minimizes automatically again. Why windows don't go away as soon as you move to them? Sometimes as a new very unsatisfying game, chasing the tabs around the screen, try to open or to close. My husband drives crazy.

  Hello

  You did changes to the computer before the show?

  Method 1: Follow the steps described below, and if the problem persists.

  Step 1: Start the computer in safe mode and check if the window minimized when you hover the mouse ove the window. Check out the following link to start the computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: If the problem does not occur in safe mode then, start the computer in clean boot in order to check whether a third-party program is causing the problem. To configure your computer to clean boot see the following link.

  http://support.Microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7 article to start on normal startup.

  Method 2: I suggest you to run a full system scan on the computer by using the Microsoft Safety Scanner to check if the computer is infected with the virus. You can download and run the Microsoft Safety Scanner from the following link.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Issue scan fingerprint with Win 7 and Satellite Pro A300

  SORRY, MODEL IS A300.

  Bunk/upgrading Vista to Windows 7 Professional and we found the fingerprint reader does not.
  Unable to remove program and custom accept the new installation of fingerprint reader or even of new fingerprints to be scanned. (Former Vista program works in background somehwere?)

  Is the fingerprint reader, which was installed under Vista now not compatible with WIndows 7.
  It seems to be still no upgrade or downloads for fingerprint drivers for Windows 7.

  Post edited by: lasdec1

  Hi mate

  To be honest, I doubt that Win 7 drivers would be published for this good old classic.
  I mean the Satellite Pro A30 is an older series and even Vista drivers have not been released for this series of models
  I searched on the European driver Toshiba page but I found only the W2k, Win XP drivers for this device

  So if you want to use Win 7 on this laptop, then you need to collect the drivers of your own hands and it would be the same with the fingerprint reader. Maybe the pilot designed and released for other series would work.

  It seems that Toshiba is in the version of the driver for different series you can take a look at the different series and might try the drivers.

• When taking picture with the light in the background with the camera back from my iPhone more than 6 s, there is a clear blue colour square (a bit like a reflection of the light) will appear.

  When taking picture with the light in the background with the camera back from my iPhone more than 6 s, there is a clear blue colour square (a bit like a reflection of the light) will appear.

  someone has an idea of what's going on?

  The blue square is the area of the camera is in point and exposure on.

  Tap on the area actually taking a picture of. For example, if you take a photo of someone int eh the room and the bottom is very light (or dark), tap on the face of the person to turn to that.

  See it-> http://iphonephotographyschool.com/how-to-use-iphones-camera-app/

• CN460A: ADF print copy with a thin line from top to bottom?

  ADF print copy with a thin line from top to bottom of page.  fine prints from the PC to the printer...

  This was probably caused by a specification on the thin glass used for scanning form the ADF.  See here for more information on cleaning this area to solve printing line when using the ADF.

• The Acer Aspire V Nitro VN7 - 792G - 709L is equipped with a camera Realsense from Intel?

  The Acer Aspire V Nitro VN7 - 792G - 709L is equipped with a camera Realsense from Intel?  I'm looking for a computer laptop 17 "Skylake founded with an Intel Realsense camera and screen 4K.  An article in September read:

  «Compared to the Broadwell and Haswell, the Nitros material Skylake get new versions and DDR4 RAM, faster wireless connectivity, a slight exterior redesign (the lid is covered with a metal foil now), more choice screen (including the options of wide gamut UHD to be 15 and the 17-incher) and a USB port gen2 with Thunderbolt 3 support 3.1.» Nitro blacks also get faster PCIe 3 rd gen storage options and a webcam Intel RealSense optional will be also available for them from December. »

  It is now December and I can't tell which models have the camera Realsense and those who don't. They say just "Webcam YES". The Acer Aspire V Nitro VN7 - 792G - 709L stands out because of the price.  It's $400 more than the fitted with similiarly VN7 - 792 G-752J with the only obvious difference being a 512 GB SSD instead of a 256 GB SSD.  The hard drive more nothing can possibly justify the $400 price difference make me wonder if this is the model I am looking for.

  Can anyone confirm if the Aspire V Nitro VN7 - 792G - 709L comes with a camera Realsense or otherwise an update on ETA what Skylake based systems with RealSense will be available?

  NitroRS,

  What I can see, is that the Realsense camera is an option on the Black Edition Nitros, VN7-* 92G series to early 2016.