HP7680 network - printing ideas, please help!
Hello all,.
I have a HP L7680 that had this same problem since I bought it and the only remedy that has worked is to summer completely reload Windows XP and start on which I'm very tired of reloading XP, solving a printer problem.
This has been reported by several other people, but I don't see where someone posted a fix.
When I first install the printer all Traffic works very well and it works very well for a few mionths. Then the first indicatrion of a problem is the voluntary departures working scanner. So when I try to reinstall the printer software does not appear. I have read and tried all the solutions and spent several hours with the help of HP without success.
The printer works very well connected via a direct USB cable and it works fine with other computers on the same network. One of the other computers has the exact same OS and is the same model HP laptop.
I don't think that uninstallation is completely delete all files or reinstall fresh when I reload. I tried level 1 to 4 uninstall utility on the HP site and we tried all of the suggestions posted in this forum.
Here is a better view of the problem.
- When the scan function is called, a "Scanning" window pops up and crashes
- I have a HP laptop with software XP32 bit
- Once the scanning window will appear there forever
- Only way to clear page scan is to put an end to hpoews01.exe with the Task Manager
- Scanner does not appear in the paint or Photoshop ect.
- Web scanner works and printer appears using the IP address.
- Scanner shows on a web page
- Now my printer is out of warranty so even less help and support HP in India was no help
Thank you
Dave
I bought an Epson Artisan 810 and it worked the first out of the box! Now if Epson can do it why not HP? Only problem with the Epson is that the paper tray is a little smaller that I like, but it works if I'm not complaining.
Tags: HP Printers
Similar Questions
-
I could not find download Windows Mobile Device Center 6.1 so I can download pic & videos from my phone to my computer. I need assistance with their phone is off and on computer any ideas please help.
-
I use iphone 5 s updated to 9.2, but I can't use the network and call someone help me please
What happens when you try to use the network?
-
computer doesn't not have a wireless network adapter installed please help
product # bt590aa #aba
HP omni desktop
Vista Windows
Please help if possible I was wondering if I can install a kind of wireless adapter
Hello
go to your device manager and see you see some devices named "unknows".
If Yes, then >
Try a few steps
go to your device manager > right click on the unknown devices > go to properties > then details tag
Select from the drop-down called Hardware ID is.
and search for it on google or any search engine, you will get the right drivers...
Here's print process filming!
I hope this helps!
Your old dosent hard drive means with it. If you can install dirvers of your wifi device so it will work with any OS or any new installed HARD drive.
I hope that helps!
* By clicking on the laurels! White Star is a great way to say thank you on any post that you helped or solved the problem.* *.
* By selecting 'Accept as Solution' for an answer that solves your problem helps others who are searching the Web for an answer *. -
Can not find the network controller driver please help
Hi, I just did a full erase and reinstall and I can't find my network controller driver, I installed about 50 of them, read many messages, I've tried everything that someone please help...
Windows 7 Ultimate x 64
G6-1c40ca
PCI\VEN_14E4 & DEV_4747 & SUBSYS_1795103C & REV_01
PCI\VEN_14E4 & DEV_4747 & SUBSYS_1795103C
PCI\VEN_14E4 & DEV_4747 & CC_028000
PCI\VEN_14E4 & DEV_4747 & CC_0280This should be the driver Broadcom wireless lan to your laptop.
Best regards
ERICO
-
Network blackBerry Smartphones please help
Hello
I m Using unlocked sprint tour 9630, now I have a connection to the vodafone India, but for the last four hours I m not getting any network. I rebooted my phone, the battery pull, infact I also wiped my phone too there is no network. I don't know what to do. Please help me
Concerning
Sumit
Hi Sumit,
Your problems seems to be a big. Well go to manage connections, then scroll to the bottom, you will see 'The Mobile Network Options' go. Under network technology make sure that your selection isGSM/UMTS. And then scan for available networks. And select your network.
Rick
-
"Windows is unable to locate a suitable printer driver" Please HELP!
Hello
I have a HP Color Laserjet 3800N physically installed on a computer in our headquarters (running Windows 7). The computers are configured on a working group with shared files and printers. And the printer works fine on this computer. I'm trying network printer for a second printer in our working group, which works in Windows XP.
I go through the Add Printer Wizard and when I get to add the printer, I get the message "Windows cannot locate a printer driver appropriate...". »
I installed the driver for XP on the HP site and am not able to get the printer to add on the second computer.
What is the solution?
Thank you
MariaHi, Maria.
You must first check the ip address in the same network, then turn off the firewall in both systems, check the printer data sharing permissions...
Thank you.
-
Laptop sony vaio windows XP version 2002 service pack sp3 operating system
and it's systems to upgrade windows 7 optional test and safety devices and
This modernization was just recently when I noticed that the old version will
obsolete and I already downloaded the windows media player 11 last year
Since then, I have optional upgrade to windows 7, I noticed that windows
Media Player malfunctioning my free audio visual spectrum, some functionality is
works not properly espicially g-force and whitecap is absent from the screen
and his completed the program with the C00D11B3 error message is you guys
have and ideas to solve this problem? "' or ' you have something free
software that can solve this problem please give me advice because
I already try to solve the problems and to dig little fishy on mine, but I don't know
where to go this eror message c00d11b3 and some of the characteristics of the network
isn't vessible it makes me confused as proxy for media player / / please give
me advice what features can I ask my Media Player if I go back to the old
Version? 'or' I pass by...
Thank you for giving me the time and your understandind.
"Sincere friendship" * address email is removed from private life. "
Although the URL is for win 7, it is always very instructive in the problems with WMP11.
http://Windows.Microsoft.com/en-my/Windows7/C00D11B3
This thread may also help.
http://www.TomsHardware.com/Forum/88631-45-Windows-Media-Player-error-c00d11b3
-
HP Photosmart B109n-z (printing problem) Please help
Hi all
I have the HP Photosmart B109n-z printer and put up wireless and it works fine I had no problem with him.
The other day the black ink stopped working - the cartridge is not empty but it's is no longer black prinking on all documents. Since I put all new cartridges in, he acknowledges them all, including black, and if I print something like a word document, and then it moves as if printing but the page comes out blank - no black ink is used.
I work for myself, and work at home, it will get this resolved as soon as possible.
I checked the cartidge - it's good.
I checked the connection and the Bay print cartridge - they are clean.
Help, please.
The color works fine.
The issue of black ink is the same print, scan or copy.
And I have tried turning everything off and on again!
Hello
You could try the Solution 5 in the document troubleshooting that I am a link here:
Quality of ink troubleshooting
This will show the colors that are printing. There are also additional troubleshooting steps to follow
-
Dear friends,
Have you encountered a problem like this is Nati sp1 or sp2, currently when I get problem like that I solve (we run system restore or Startup Repair last option: reinstall the operating system)
symptoms: System very slow and unable to boot or just freezes on the Welcome screen, or sometimes not even vista starts in safe mode or safe mode command prompt.
I tried the next option, this has worked for me in some cases. but not many times.I open a command prompt terminal high, do you it by logging in as an administrator as launching the cmd.exe as an administrator (right click, run as administrator). Then type the following command that uninstalls the device said:
netcfg EI u ms_sstpminiport
want to know is there permanent fix or patches for this problem and why this is happening only in vista. I also had windows 7 and xp sp3. I had no problems in that.
Kind regards
King of the computer
See if the following Help article: http://www.vistax64.com/tutorials/171469-uninstall-device-device-driver.html.
If this does not work, download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx and go to the tab all. See if you can find the place where the device (or at least the driver) is loading and uncheck to stop to happen. Click OK and exit, and reboot and see if the problem persists. It cannot remove the device or the driver, but if he let them go then the problem is solved until we can find a way to remove actually - hopefully without needing a repair system/upgrade or a clean installation.
I hope this helps. I would like to know how it works.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
I have Toshiba satellite A 505 S6989
I accidentally deleted "Wireless Network Connection" icon of "changing the adapter setting" (network & sharing Center) while she was to allow...
I have driver installed several times but he forces back...
Also checked... but under the network adapter, Device Manager is showing only realtek ethernet... no wifiPlease tell us how to get back this icon so that I can connect via wifi...
Please answer as soon as possible
concerning
AfonsoI solved the problem a few days before, sorry for the late response...
WiFi card was detached from this place (it was a hardware issue)
I opened my laptop and re placed this wifi card.
now it works fine
Thank you
-
Unity - VPIM network domain SMTP, please help problem
I need help to solve the problem of SMTP domain.
1. the unit
-main site SMTP domain = domain1.com
-delivery location SMTP domain = yyyy.ca
2 Exchange server
-by default the recipient [email protected]/ * / and @yyyy.ca
-SMTP transport sink = domain1.com VC
2 3rd party mail server
-main site SMTP domain = yyyy.ca
-delivery location SMTP domain = domain1.com
With the configuration, cannot the unit send to 3rd party because yyyy.ca think as local rather than remote SMTP. It works if I remove the yyyy.ca in the default recipient policy.
I have to paste the default as above and the question is how can I solve the problem? can I create a new policy with @domain1.com only and link to the VC?
Please notify.
You cannot have a delivery location remotely as yyyy.ca AND yyyy.ca as a default recipient policy. You will need to create a new domain for the delivery location (one that is not on the recipient policy), and then change the local delivery on the voicemail system 3rd party smtp domain.
It's just not possible to tell Exchange yyyy.ca is local and then expect not to deliver it to a remote location of smtp.
-
'Adobe printer paused' Please HELP ~.
Hello
I normally print from my PowerPoint application in pdf format and now it has stopped working.
I see on the screenshot PowerPoint, he said 'Adobe print printer paused '.
Do you know how I can of the Nations United-pause printing?
Thank you
Kelly Monroe
Hi kellym28418428,
Could you please let us know the operating system installed on your computer-Windows/Mac?
What is the version of the dowry of Acrobat is installed on your computer?
This phenomenon happens with specific file or other files as well?
Have you tried printing from other applications like Notepad/Ms Word?
Try to print from other applications and see if you still get the same message.
Also check if there is an update available for Acrobat.
Follow the steps in this link: printing is paused
Let us know the results.
Thank you
Shivam
-
Windows Vista premium, boots to black screen edition. freezes on crcdisk.sys when you try to start in safe mode. now online and answer all possible solutions, I tried. many points of view, no response!
Hello brent383,
1. don't you make changes to the computer before having this problem?
Black screen problems are usually caused by display drivers does not not or the material does not.
You can try the methods below to resolve this issue.
Method 1:
Try to start the computer in mode low resolution, as this may be caused if the graphics card is unable to load the drivers.
a. restart your computer if it is running.
b. press the F8 key after your computer powers initially.
c. Once you see the menu Options Advanced, boot you can stop tapping.
d. use the up/down arrow keys to highlight your selection.
e. Select the low resolution mode.
You may need to install the drivers for the graphics card if it works very well in this mode.
Method 2:
Because safe mode gets stuck on crcdisk.sys, it seems to me that the problem may be related to the hard drive. I suggest that you run chkdsk on your computer.
You should try running a Chkdsk on your computer to check if there are bad sectors on the hard disk.
a. Insert the Windows Vista DVD into the DVD drive, and then restart your computer from the DVD.
Note: when you receive the press quickly press any key to boot from the CD or DVD, press any key on the keyboard to restart your computer by using the Windows Vista DVD.
b. Select your language setting, and then click Next.
c. Select repair your computer.
d. Select the installation of Windows Vista to be repaired, and then click Next.
e. under System Recovery Options, select command prompt and type:
CHKDSK [drive:] [/ p] | [/ r]
[drive:] Specifies the drive to check.
/ p check even if the drive is not marked dirty, bad.
/r locates bad sectors and recovers readable information (implies / p).
WARNING: This could cause loss of data on your computer. It is recommended that you back up all data and files before performing this.
Thank you
Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think. -
HP laserjet p1007 printer works is not in Windows 7 please help
p1077 of hp laser printer does not work in Windows 7, 32 bit OS... all the installation process succeeded, but when the page is requested to print his not not printing... even the test page is not not print so please help me solve this problem please...
Thank you..
Check out this link.
Maybe you are looking for
-
How to get updates for Firefox on my laptop.
I get that my Firefox is still to date, but cannot find the place where or what is the most updated version of it andHow do I know that it updates automatically.
-
Installation of Windows 2003 Server on Tecra
I bought a Tecra Toshiba last month and since we are a team of developers, we decided to convert it to a server and Windows Server 2003 installed in the process I lost all the drivers (I forgot to backup the drivers).Available drivers are for windows
-
Can I use a GPIB PCI instead has a HP 82350
Can I use a card NI PCI-GPIB IEEE 488.2 in instead of a map of 82350 HP. I want to configure a 5890 II to a PC running Windows 2000 with the Chemstation B02.01 software. Sorry - Posted two places.
-
Windows Live Mail received the scam e-mail. You want to make sure it is a scam.
original title: Windows Mail checking I'm looking to confirm that the following email was really sent by the windows group: Dear user, We had a problem with our database and a large number of documents have been lost, we restore our database to allow
-
I have a HP Officejet 6500 E710n-z (network) that I use at home to scan to a PDF file, and I know exactly how to move the cursor from the 'Smaller' in 'best quality '. However, the size of PDF files are far too large when the picture quality is accep