HPE-470f built in SD card reader reads the cards as write protected

Similar Questions

• I have a micro cell phone memory card, I'm trying to delete files MPG and it says that the disk is write-protected, how can I disable this?

  I have a micro card.  I used to put photo files.  Today I'm trying to remove them and I get a message that the card is write protected.  How can I disable this?

  I guess you put the micro card in full-size SD card reader? Look on the side of the SD card. There is a small switch that is write protected. Put it to the other position.

• remove the error of write protect, transfer music files to the micro sd card

  remove the error of write protect, transfer music files to the micro sd card

  on micro SD card it self you have a little pass that you can move

• Cannot copy to the phone - says write-protected memory card

  The phone's sim card cannot receive an image of the computer. I get a message saying that it is write protected. How can I fix it?

  Hi Linda,.

  What is the brand and model of the memory card?

  It seems that the memory card is write protected. I suggest you refer to the suggestion given by John Rubdy in the following thread and check if this can help:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/SD-card-write-protection/d34150b0-7a49-413c-A483-0fa74eafed47

  Note: If you format the memory card, all data will be lost.

  Let us know the results.

• SD cards are write protected on Vista

  I have several multiple brands SD cards that my Vista 64 system identifies as write protected.  I have two readers of different SD cards on the Vista system and they are both the same error.  The same SD cards can be written to by digital cameras and my windows XP computer.  I confirmed that the write protection tab is in the unlocked position.  Five separate SD cards are involved between 256 MB and 2 GB.  Several brands are also involved.

  I tried the suggested process of 1. The card 2. Select eject 3. Remove and reinsert the card 4. Try to write on the card.  After four or five attempts, this did not help.
  I also tried selecting the card in Explorer and selecting open as Portable device.  For reasons I don't understand, one of the SD cards started working after doing this twice.  However, it does not work for the other 4 SD cards.

  If the computer and the camera say it is write protected, so it's write either protected or damaged.  Look for the sliding on the card locking lug and unlock it.  If there is no locking tab then the card may be damaged and in need of replacement.

  writing in the new message: * e-mail address is removed from the privacy... *

  Im having the same issue, but I have win7. He just started the day a blue. what I'm doing because now my camera won't read/write on the map of British Colombia, it says protected

• Cannot remove the Photos from an SD card in the card reader in Windows 7 error "is an error error application attributes - produced - the media is write protected."

  Please check the post from Jetta48 on this article, for the workaround to resolve your concern.

  Have a nice day ahead!

  I agree with you and think it had something to do with a Windows Update. I got this computer with Windows 7 for a couple of years and it took until this month I got the problem. Cannot delete the photos when the card reader is on a Windows 10 computer either.

• Memory card is write-protected

  (Microsim) memory card is protected writable under windows 7 what can I do?

  Some cards have a switch small slider that allows you to turn the writing on and outside protection.

• HPE - 590t: 15-en-1 card reader no longer works

  Hi all

  Today, I noticed that my SD card reader stopped working in my HPE - 590t.  I noticed that Windows 10 assigns generic drivers at the following as shown in Device Manager:

  All other players are working perfectly, only the 15-in-1 card reader does not work, which leads me to believe that the generic drivers that has installed 10 Windows are not compadible with this device.

  My HPE - 590 t initially provided with drivers for 15-in-1 card reader and worked well with Windows 7. Anyone know where I can download third-party drivers 3 for this device? I read that some users who have realtek devices are able to use the realtek drivers.

  My HPE - 590 t has a card mother IPMTB-TK Pegatron Truckee - UL8E.

  Given that the specs on my system does not identify the manufacturer of the card reader - 15 in 1, I am at a loss to know where to go for the drivers for the 15-in-1 card reader.   If anyone has any suggestions, I would be very happy!

  HP DV9310 Windows 7 Professional 4 GB RAM

  DV7t-6100 Windows 7 Pro 8 GB RAM

  Hi all

  I just wanted to point to my own son I found a solution.  15 - in a single card reader had apparently dust causing the drive only reads do not my SD cards.  In which case I solved this situation by spraying a can of air into the slots and now the 15 - in-1 card reader works fine without problems.

• Built-in memory card reader does not

  Hi all
  I use an Acer aspire one 533 with windows xp sp2. My has netbook with a built-in memory card reader that does not detect my memory cards (SD cards).
  FYI, the laptop has recently been recreated!
  Please help me! I am in critical need of it as most of the work on readers of SD.

  It is very possible that you need a driver.  The first place to look is the Acer site.  I couldn't find your model (533) in the list but I found a 5330 model at the following link which includes drivers for the card reader:
     <>http://support.Acer.com/us/en/product/default.aspx?tab=1&modelId=52 >
  Start your search here:
     <>http://support.Acer.com/us/en/default.aspx >

  If this does not help, do the Device Manager:
  Start-> Run-> "devmgmt.msc".
  Find your card reader in the list, double-click it to obtain information on the manufacturer and model, and then search for a driver from the manufacturer's website.

  HTH,
  JW

• Built in SD card reader does not work

  I recently installed Windows 7, now the built in SD card reader does not work. Before, I was able to insert the card into the slot and would open a drive. No records for accommodation of readers appear on my computer.

  You have installed the Windows 7 drivers for the card reader?

  I go to the computer manufacturer web site and download the appropriate drivers.

• Problem with the built-in SD card reader.

  Hello

  After many hours of searching through previous post, I am still unable to get my card reader built-in to read.  It worked fine for a while, and then all of a sudden it stopped.  I tried everything, different micro sd adapter mirco sd cards and also read the posts here.  So why I am now posting looking for any help there.

  Thank you.

  Ulster 03.

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• Can read the SD card SDXC standard S7-392?

  The Acer S7-392 record indicate only "SD", but not whether the SDHC or SDXC card types can be read. A quick search of the web shows several contradictory web pages! Some say: 'Yes,' some say 'no '.

  So, if all goes well a real representative Acer or a real owner of S7 - 392 may answer: can the slot built-in SD read the new SDXC format (which, according to Wikipedia, will be formatted with the exFAT file system)?

  Thank you!

  Alain

  Yes. I use a card of exFAT Sandisk Extreme 64 gb with no problems

• DM4 memory card reader won't read the Extreme Pro Sandisk SDHC card

  I have a dm4-1201us and the built-in memory card reader will not read my Sandisk 16 GB SDHC Extreme Pro memory card. I can read with an external drive, but prefer to use the internal drive. I think that HP needs to update the memory card driver reade.

  I solved the problem by inserting the memory card into the internal drive. Then I opened the Device Manager and found the drive, which was a mistake on the Bill. I deleted this device and check the 'delete the driver '. I did a restart and now it reads SDHC cards.

• USB port from a digital Multiport card will not read the external SSD drive. Right USB - c for the USB adapter works fine.

  USB port from a digital Multiport card will not read the external SSD drive. Right USB - c for the USB adapter works fine.

  It's a new 12 '' MacBook

• Satellite Pro U500 - 18 k cannot read the SDHC 8 GB cards plus

  Hi all

  My stops U500 - 18 k read the SD card. What SD card SD icon Windows explorer see, but when I am clicking on the icon, to get the message 'Please insert a disc in SD (J) '. I tried to read the 8 GB SDHC cards. The maps are certainly working. With MMC and XD card reader works well.
  I reinstalled utilities SD and card controller driver Richon. This does not solve the problem. OS Win 7 x 64. Any ideas?

  Thank you.
  Rytis

  Are you using this SDHC 8 GB card for the first time?
  Have you noticed the same situation using different SD cards?