Cannot copy to the phone - says write-protected memory card

Similar Questions

• format a write protected memory card

  How to format a write protected memory card?

  Slim,

  If you look at the adapter supplied with the micro SD card, there is a "lock" button label  Make sure that it is not in the 'lock' position and try again.  You might want to try to format with another application like sd formatter or something similar...

  If my post answered your question, please mark it as "accept as a Solution.

• In ultimate windows 7, when I want to paste or create a file on USB, windows says: the disk is write protected. ?

  in Window 7 Ultimate. When I want to create a file or paste a file copied to a USB port or flash memory, windows cannot perform this action and the message: the disk is write protected.but when I used the same USB Win XP, disc is OK and not write-protected.
  I tried this question on several USB key, but the result was the same.
  anydody can help me?

  Hi Saleh2506,

  You can try and remove the disc, remove the write protection (by reversing a tab on the disk), and then try again.

  If you do not have the valve on the USB, try the following steps to resolve the problem:

  1. Click Start , type regedit.exe and press ENTER.

  2. navigate to the following location:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrrentControlSet\Control

   

  3. control with the right mouse button and select new and key.

  4. call it as StorageDevicePolicies.

  5. click on StorageDevicePolicies and on the right pan right click and select new > DWORD and name it as WriteProtect.

  6 double-click it and set its value to 0.

  This will disable the write protection on USB/flash drives.

  Restart your computer and check to see if that fixes the problem.

  Important The above section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/

  I hope this helps!

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• It cannot be delete because the disk is write protected.

  When I want to delete a folder on drive c, then following the message show:
  It cannot be delete because the disk is write protected.
  Please help me

  These protections are put in place so that you do not delete the files or folders that have the need by other programs.

  If you know that you can remove there is a program called Killbox JUST BE VERY CAREFUL what you DELETE! Please rate me upward if you find my post helpful. Thank you!

• Whenever I try to delete files from my USB, the message saying that you can not delete the file, the disk is write protected

  original title: write protection

  Whenever I try to delete files from my USB, the message saying that you can not delete the file, the disc is write protected is displayed. What I can do to undo the write protection?

  Try this
  Go to disk management in administrative tools of the control by just one panel right click on the icon my computer on the desktop and select manage and then try to format your USB

  OR

  Try this
  http://www.ehow.com/how_5187399_format-write-protected-disk.html

• I am trying to copy photos to a CD - RW disc nine, the message indicates that the disk is write-protected, what should I do.

  I am trying to copy photos to a CD - RW disc nine, the message indicates that the disk is write-protected, what should I do

  Hello

  You can follow the steps below to solve the problem:

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/

  1. click on Start, typeregedit in the Start search box and press ENTER.

  2. navigate to the following key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies
  
  3. If the key exists, go to step 7.

  4. in case the StorageDevicePolicies key does not exist, you must create a new.

  a. right click on the empty field and select new > key.

  b. name the new key as StorageDevicePolicies.

  5. turn on highlight StorageDevicePolicies, and then create a new DWORD called (32-bit) as WriteProtect.
  6. double click on WriteProtectand set its data value to 0.

  7. If the key already exists, double click on WriteProtect and change its value from 1 to 0 to allow write access.
  8. exit the registry editor.

  Check whether the problem is resolved.

• Cannot send faxes. Message: "the message cannot be sent. Media is write protected"OS Win7 64

  I had this set up fax and work before, but had to reload windows and it has not worked since. The fax account appear to be installed and shows as connected. When I try to send a fax, the error message 'Write-protected media' appears.

  I have the function enabled in "Windows features" fax and the modem works properly according to the "query" in the modem properties.

  To install the fax account I had to check send later because when 'connect to a modem' has been verified an error message pops up telling me that there is a modem installed.

  If you check receive a fax, the modem starts and a fax tone and a tone can be heard but still sending does not.

  I had this set up fax and work before, but had to reload windows and it has not worked since. The fax account appear to be installed and shows as connected. When I try to send a fax, the error message 'Write-protected media' appears.

  I have the function enabled in "Windows features" fax and the modem works properly according to the "query" in the modem properties.

  To install the fax account I had to check send later because when 'connect to a modem' has been verified an error message pops up telling me that there is a modem installed.

  If you check receive a fax, the modem starts and a fax tone and a tone can be heard but still sending does not.

  This will help you... go register around...

  http://www.winvistatips.com/fax-error-message-could-not-sent-media-write-protected-t158670.html
  then restart your pc and go ahead with the next steps

  Step 1: Restart the fax service
  a. Click Start, type services.msc and press to enter.
  b. in the list of services, right-click on the fax, and then click Stop.
  c. double-click Fax, change the startup type to automatic and click on the Start button.
  d. click ok to apply the changes.
  e. check if the problem persists.

   
  If the problem persists, disable and enable the Windows Fax and Scan
  Step 2: Disable Windows Fax and Scan
  a. Click Start, type optionalfeatures and press to enter.
  b. in the list of objects, expand "Print Services" and Document
  c. uncheck "Windows Fax and Scan"
  d. click ok and restart the computer for the changes to take effect.
   
  Step 3: Activate Windows Fax and Scan
  a. Click Start, type optionalfeatures and press to enter.
  b. in the list of objects, expand "Print Services" and Document
  c. place a checkmark on "Windows Fax and Scan."
  d. click ok and restart the computer for the changes to take effect.
   

• Restart issues "Group Policy Client Service could not connect." "The media is write protected."

  The problem arises when a Norton message requires a reboot. It does not get me beyond the point when Windows prompts for a password. The words appear on screen reboot problems ' Customer Service Group Policy has no connect. " "The media is write protected."

  I cause the phone to crash in order to activate the Windows repair program.  It works but the custody of Norton is disabled. A program Norton Repair heals so that the fault.

  I had several chat sessions with Norton, but they now point me to Microsoft saying that it is a Windows program that is related to Norton.

  Hi ColinAW,

  Your computer is connected to a domain?

  The question could be linked to the program Norton himself. I suggest you try the following steps:

  Step 1: Disable Norton Security software; Follow the steps mentioned in the link below

  Disable antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important: Activate security software once everything is done.

   

  Step 2: The computer in the boot and a test

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  If this problem occurs only updated Norton software, of course, the problem is related to the Norton software, and you can check with Norton again for any patches to address this issue.

  http://www.Symantec.com/Norton/support/index.jsp

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• "I can't copy all the files to my kingston sd card, when I try to copy his shows that" remove right protection "so plsss help me get rid of this.

  "I can't copy all the files to my kingston sd card, when I try to copy his shows that" remove right protection "so plsss help me get rid of this.

  Hi ebugsasi,
   
  To remove protect him writing on a kingston Micro SD cards, locate a switch or button on the side of the micro SD adapter card. It will normally be a symbol of locking/unlocking on it. Put it to the unlocked position.
   
  This should remove the write-protection feature.
   
  Keep me updated on the status of the issue.

• When you try to save pictures on a CD - RW, get error "the disk is write protected".

  I have Windows Vista and you tried to save pictures and a video on multiple disks without success. I am trying to record pictures on a CD - RW disc, but get the message "the disk is write protected."

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD

  Burn a CD or DVD

  If your computer is equipped with a CD or DVD burner, you can copy files to a recordable disc. This process is calledburning a disc. By default, Windows Burns discs in the active file system format, but you can also choose to burn discs in ISO image format.

  http://Windows.Microsoft.com/en-us/Windows-Vista/which-CD-or-DVD-format-should-I-use

  Should which CD or DVD format I use?

  What format you use is determined by the computer that you will use to read the information that is recorded.

  See if help above,.

  See you soon.

  Mick Murphy - Microsoft partner

• BitLocker error "failure of restoration of a conversion completed abruptly BitLocker Drive Encryption. "Can be either all newspapers of conversion being corrupt or the media is write protected."

  Original title: problems with BitLocker.

  "Hi, I enabled BitLocker on my external hard drive, plug into the system to access my files, it shows error ann response after I entered my password just a mistake:

  "BitLocker Drive encryption is not recover sharply completed conversion. "Can be either all newspapers of conversion being corrupt or the media is write protected."

  Please help me with a solution

  If this does not work... http://TechNet.Microsoft.com/en-us/library/ee523219(v=WS.10).aspx .. examine the contents of the drive and the drive itself lost forever.

  BitLocker is the Windows utility for free one that really mean, and it does EXACTLY what it says on the box, BUT if the disk on which it is enabled has a problem for SOME reason, the results are catastrophic.

• Cannot copy AVSEQ01: the parameter is incorrect

  It is a copy of a publication in the field of technology, I did. If this isn't the appropriate forum, let me know where to post. Thank you.

  I'm having a problem. I am trying to copy a. DAT file to a VCD on my hard drive. This particular file is between 600 and 650 MB. When you try to copy the file, I get the following error message: cannot copy AVSEQ01: the parameter is incorrect

  There are two others. DAT files on the CD that I am able to copy, the most important of which is only 13 MB.

  I'm on a Win XP SP3 update. Readers to that I copy are NTFS.

  The last time I had a similar error I was copying MP3 to DVD files on my hard drive. I found myself finally Mac sister to borrow and copy the files to an external hard drive.

  I would prefer not to have to do. Help.

  Thank you.

  Hello

  The question you have posted is related to Technet and would be better suited to the Technet community. Please visit the link below to find a community that will provide the best support.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• Outlook Express cannot send and receive emails and cannot sync to the phone.

  Hello

  I'm a Microsoft Online Customer Service, which contacts on behalf of my client. My client has problem with Outlook Express, which cannot send and receive emails, and cannot sync to the phone. He receives this error message below:

  The host 'SMTP' could not be found. Please check that you have entered the server name correctly. Account: 'POP3', server: 'SMTP', Protocol: SMTP, Port: 25, secure (SSL): no, Socket error: 11001, error number: 0x800CCC0D

  I'm not sure of the sync with the phone number, but the account settings are not yet near. SMTP is not a host name or a server name. You must find the correct POP3 server settings.

  Setting up email in Outlook Express servers
  http://www.Microsoft.com/Windows/IE/community/columns/mailserver.mspx

• When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy. The directory or file cannot be created. »

  original title: could not copy files

  When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy.  The directory or file cannot be created. "I understand that I may have the physical limit of USB keys for the root directory.  How can I fix it?

  Hi GloriaZF,

  What is the size of your external hard drive and what is the available free space? Open my computer-> right click on the external hard drive-> properties. You will not be able to copy more data if the disk is full, or who have less space compared to the size of the file you are trying to copy.

  You need to remove the order data to make the space more. Deleted data from the device USB will be permanently deleted and will not be stored in your Inbox, so take care while eliminating unnecessary data.

  I hope this helps.

• remove the error of write protect, transfer music files to the micro sd card

  remove the error of write protect, transfer music files to the micro sd card

  on micro SD card it self you have a little pass that you can move