href with scroll (0,0) no longer works!

Similar Questions

• After the update to OS 9.2.1 connection of my mini iPad with a VGA projector no longer works... Any clue?

  After the update to OS 9.2.1 connection of my mini iPad with a VGA projector no longer works... Any clue? Thank you

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

• DONKEY with AIR 22 update no longer works

  Hello

  I have a DONKEY simple that file sharing.

  It was built with AIR 19.0 and Xcode 6.1.

  I want to update AIR 22, but you have successfully updated the iOS SDK, I have installed XCode 7.3, base SDK is 9.3 iOS and iOS deployment target is iOS 9.0.

  I have a platform.xml like that.

  <sdkVersion>9.0.0</sdkVersion>
      <linkerOptions>
          <option>-framework AudioToolbox</option>
          <option>-framework AVFoundation</option>
          <option>-framework CFNetwork</option>
          <option>-framework CoreFoundation</option>
          <option>-framework CoreGraphics</option>
          <option>-framework CoreLocation</option>
          <option>-framework CoreMedia</option>
          <option>-framework CoreVideo</option>
          <option>-framework Foundation</option>
          <option>-framework MobileCoreServices</option>
          <option>-framework OpenGLES</option>
          <option>-framework QuartzCore</option>
          <option>-framework Security</option>
          <option>-framework SystemConfiguration</option>
          <option>-framework UIKit</option>
          <option>-framework ImageIO</option>
          <option>-framework CoreTelephony</option>
      </linkerOptions>
  

  My code to share a file is, in objective-C, where the variable URL is a URL, the path to a local file

  @try {
     
              UIViewController * controler = [[[[UIApplication sharedApplication] windows] objectAtIndex:0] rootViewController];
             
              UIActivityViewController *activityVC = [[UIActivityViewController alloc] initWithActivityItems:@[URL] applicationActivities:nil];
              //activityVC.excludedActivityTypes = @[UIActivityTypePrint, UIActivityTypeCopyToPasteboard, UIActivityTypeAssignToContact, UIActivityTypeSaveToCameraRoll]; //or whichever you don't need
             
             
              UIPopoverController *popup = [[UIPopoverController alloc] initWithContentViewController:activityVC];
              [popup presentPopoverFromRect:CGRectMake(0,0,0,0) inView:controler.view permittedArrowDirections:UIPopoverArrowDirectionAny animated:YES];
          }
          @catch (NSException *exception) {
              DISPATCH_STATUS_EVENT(context,"DEBUG_TRACE", (const uint8_t*) [exception.reason UTF8String]);
          }
  

  I have this error in execution: *-[__NSPlaceholderArray initWithObjects:count:]: attempt to insert nil objects [0] object

  UIPopoverController is obsolete now, I triied to update my code, as a result of this http://www.goxuni.com/672368-adding-a-share-button-to-an-objective-c-ios-app/

  And the result is:

  @try {
              UIViewController * controler = [[[[UIApplication sharedApplication] windows] objectAtIndex:0] rootViewController];
              
              
              NSArray *activityItems = @[URL];
              UIActivityViewController *activityViewControntroller = [[UIActivityViewController alloc] initWithActivityItems:activityItems applicationActivities:nil];
              activityViewControntroller.excludedActivityTypes = @[];
              
              activityViewControntroller.modalPresentationStyle = UIModalPresentationFullScreen;
              if (UI_USER_INTERFACE_IDIOM() == UIUserInterfaceIdiomPad)
              {
                  activityViewControntroller.popoverPresentationController.sourceView = controler.view;
                  activityViewControntroller.popoverPresentationController.sourceRect = CGRectMake(controler.view.bounds.size.width/2, controler.view.bounds.size.height/4, 0, 0);
              }
              [controler.self presentViewController:activityViewControntroller animated:true completion:nil];
              
          }
          @catch (NSException *exception) {
              DISPATCH_STATUS_EVENT(context,"DEBUG_TRACE", (const uint8_t*) [exception.reason UTF8String]);
          }
  

  The error is the same: *-[__NSPlaceholderArray initWithObjects:count:]: attempt to insert nil objects [0] object

  I really don't understand why it worked before, and now with new AIR SDK, Xcode new and new iOS SDK, it does not work.

  That's Ok with the last AIR 22 SDK

  Bug #4146925 - ANE compiled with AIR 22 no longer works

• The links I created a page that I built with edge animate are no longer works.

  I created a Web page with edge lead a month ago. The links worked then. I just checked and the links are no longer working. I have no idea why.

  Thank you. I fixed and the links work now. I refine them, but the links are back. I never would have found on my own. Thank you for your help.

• BlackBerry Smartphones Bluetooth tethering with the "BOLD" is no longer works with version official de.282

  Just improved official a.282 of carrier (Rogers).  Tethering is something that is free/Prov. / "" their point of view is its your data how you want to use "and avec.282 Bluetooth tie is no longer works."  I'm on a Mac, but the problem occurs in the world.

  Any ideas of the pourquoi.282 beat attaching.  I heard everything that precede.190 has disabled/broken tethering?

  Found the solution.  THANKS BE TO GOD.

  http://www.Setera.org/projects/BlackBerry-bold-pppd-replacement/

  Simple installation.  Turns out to be a Mac problem and not a problem of BB

• Sierra + Magic Trackpad 2 = Force click with a single finger no longer works

  Since the upgrade to Sierra, did someone else, difficulties with the Magic Trackpad 2 and using the force click to pull up definitions? If I turn it back to "tap with three fingers," it works, but is not the "click with one finger. In fact, I'm not sure I can get this intermediate response click at any point that used to be present in El Capitan.

  Hey Lonnie Warpup,.

  If I understand correctly, you are using macOS Sierra and you try to use the power of touch, but it does not perform this action.
  I would recommend that you read these articles, they explain if your device supports the Force Touch, with a setting to enable and disable the Force Touch and how to set the sensitivity and how to turn the Look up feature words.
  
  

  The Magic Trackpad and Magic Trackpad 2 supports all available on laptops Apple trackpad gestures.

  Sierra macOS: use a trackpad Apple wireless

  1. In the Apple menu, choose System Preferences.
  2. Click Trackpad.
  3. Click on the tab 'Point & Click '.
  4. Find "Click pressure" and adjust the slider according to your preferences. Note that the sound of the click of Exchange with the click pressure adjustment.

  To turn off the click Force function, uncheck the box 'Force Click and haptic feedback'. This will disable the functionality described in the Trackpad preferences pane.

  With the help of a touchscreen trackpad Force - Apple Support

  • Look up a word: CTRL-click on the word or phrase (in some applications, you may need to select all first), then select find from the context menu. Or type the word or the sentence with three fingers (if the gesture is selected in the Préférences Trackpad).

    If your trackpad supports force by one click, you can set the gesture of looking up to use it instead of a tap. (To force the click, press firmly until you hear a click deep.)

  macOS Sierra: search for words

  Thank you for using communities of Apple Support. Have a good.

• Computer HP laptop with built in microphone no longer works

  I have a hp laptop with build something of my microphone and microphone all stop working

  Hello

  Check with HP Support, their drivers and documentation online and ask in their forums.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =========

  Try a system restore before that happened.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  =========

  If necessary:

  It's probably the pilots who are responsible and who may not really be later or they need to be
  re-installed anyway. The best way is to manually review using the methods below.

  References to Vista also apply to Windows 7.
  
  Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek High
  Audio definition (this is an example and you can have an other name/maker).

  Write the description and the model double click on it - tab drivers - write down
  Version. Now click on update drivers who cannot do anything as MS is far behind certifying
  drivers. Then CLICK RIGHT on it and UNINSTALL - REBOOT - this will rebuild the driver
  stack.

  You can have the default windows or a former certified pilot and it's all or part of the
  issue.

  Now, go to the site of the manufacturer of the system and get the latest Audio/Sound drivers - download - SAVE - go to
  where you put - right-click on Reboot - RUN AS ADMIN-

  Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
  and then install the latest version. Restart and check after each test, not
  rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
  installed shows upward on the tab of the driver.
  
  Go to the site of the manufacturer of the device, and then search for the even more recent drivers and install repeat
  operating mode. Download - SAVE - go to where you put them - click on - RUN AS
  ADMIN - Reboot

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (updated drivers manually using the methods above is)
  to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check see the
  Disconnected devices and show disabled devices - check your micro - highlight
  then on lower right properties. Make sure that the appropriate injector is selected and check
  other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  The volume of the audio recorded by sound recorder in Windows Vista or in Windows 7 is less than
  in Windows XP (or Vista)
  http://support.Microsoft.com/kb/973446

  I hope this helps.

• Web links in emails (with Outlook Express 6) no longer works since the 13.0.1 update.

  Use Firefox for yonks (with XP-pro-SP3).
  After all at the final hour updated to 13.0.1, when I click on a link in an e-mail (for which I use Outlook Express), nothing happens. (I have already many pages open Firefox, I tend to not to close their.) Can only open the link by copying and then open a new Firefox window from scratch.

  Thanks that fixed. For any reason (or no) FF had ceased to be set as default browser, in fact, somehow it seems there is no default browser!
  Thanks again for your quick and easy solution!

• 3500 scrolling the mouse no longer works correctly

  I use a 3500 since May 2010 wireless mouse but the scroll started an abnormal behavior. When I move the mouse wheel it scrolls to the top step and then scrolls a step to the original position. I've updated the drivers after problem, I got later. But the problem persists.

  I tried on a Technical Support < removed >for MS Hardware, but he says number does not exist.
  How to troubleshoot a TI a way to contact the microsoft customer support the India.
  my number is 09628373909

  See the hardware support Microsoft troubleshooting questions:

  http://www.Microsoft.com/hardware/en-us/support/troubleshooting

• CS5 vs CS3 CTRL-drag with the curves layer no longer works?

  I recently moved from Photoshop CS3 to CS5 on the PC. When I create or use a layer of curves in CS3, if I CTRL-click on the image, it adds the curve points to the value of the image and if I CTRL-drag on the image, it would show a cursor move along the curve based on the values of the image. Both very useful. Doesn't seem to work in PS CS5. Am I missing something?

  
  Thank you

  Try clicking on the small hand icon in the upper left corner of the dialog box curves CS5 - then you get a pipette for your cursor and you run this over the image, you will see the small sphere up and down the diagonal line in curves. To place a point on the RGB composite curve, just click. To place a point on the 3 R, G and B curves you Ctrl + Shift + click.

• Google toolbar, among others no longer works! When comes out the path for that?

  Google toolbar addon (with many others) is no longer works with Firefox Ver 5. Are untangle you this problem?

  Each module developer is responsible for testing their add-on for Firefox 5 and then update to Firefox 5.

  The 7.1.20110512W version Google toolbar works in Firefox 5.0 using the add-on Compatibility Reporter, I tried it myself because of the large number of comments on the problems of the GTB.
  
  https://addons.Mozilla.org/en-us/Firefox/addon/add-on-compatibility-reporter/

• bar who control the volume no longer works on nb dv6-1341el

  Hello, I have a computer laptop dv6-1341el who has never had any problems so far, but now the bar which lets you adjust the volume and the wireless light control that touch seems to not want to work more, that is, the display is okay, but as with the touch controls no longer work. I have not changed anything in the configuration, I just used a pair of headphones, and since then has disappeared. I don't believe in coincidences, then, can anyone suggest me what I have to reinstall drivers or programs, before thinking to format the pc?

  A hard reset works sometimes. Disconnect all external devices first.

  battery and power cord 1 / removal

  2 - Press the power button for 30 seconds

  3 reinstall only the power cord for the first start.

  4. turn on

• Two-finger scroll is no longer work

  Updated for Sierra yesterday. Two fingers scrolling is no longer works. Called AppleCare. They suggested that I re - install. That didn't fix it. (Already zapped the P - RAM... and did another reboot with some keys used.)

  The next option that was recommended was to delete my preferences file. Who's going to lose ALL my connections and other preferences so I'm not ready to do it again.

  Have not seen other examples of what is happening (except here which mentions three fingers slide...)

  Any ideas?

  Thank you.

  Solved. Unchecking and then scrolling control in the accessibility preferences window (mouse and Trackpad, Trackpad options) did it. Yay.

• Menu bar no longer works with the IE Update

  With the recent update of IE my main menu bar no longer works, "stationary" function does not work and it looks like the links are broken, but the links do not work if in fact, you click on it.  My vista machine, it is OK, but my XP machine, it does not show as a link. The submenu however works yet, here is the code, the first line is in the main menu and does not, the 2nd line a submenu and works.

  Here is the site www.conundrumadventures.com

  In the main menu, this is the code for "Adventures":

  < td = '002' id class = "link4" onclick = "" location.href ='Teambuilding exercises - Adventures.php' ";" onmouseover = "changeC('002','link4h'); "onmouseout ="changeC('002','link4'); ' > < table > adventures
  < /tr >
  < b >
  In the page of adventures here is the code for the submenu for "Enigma Metro":

  < id td = "303" class = "Sublink4" onclick = "" location.href ='Outdoor-Team - Building.php' ";" onmouseover = "subchangeC('303','Sublink4h'); "onmouseout ="subchangeC('303','Sublink4'); ' > Riddle Metro < table >
  < /tr >

  Any ideas how to fix the main menu bar?

  Thank you

  Lynn

  Well, the aroow is visible now. Maybe you should add a background image in the .link4 style.

  I guess you should check your code for errors more.

  Friend

• Thunderbolt manual bridge IP no longer works with Sierra

  I use a Thunderbolt bridge with manual IP connection to connect 3 mac to my main MacPro, since the update of Sierra I can't connect one of the mac via the manual / plus static IP.

  Please HELP, am I missing something? It has worked before and now it no longer work.

  Joe

  Anyone?

  My work is stationary, and my staff is looking at me.

  Help, please!

  I also note that since the Sierra update whenever I connect to the server via the LAN cable or stroke, it appears this box, -that use only to appear only once (when I put in place) and hten again, unless I have re - install the operating system.

  Perhapse it is a new way to set up an IP Maunaul or I've never done right. Help, please.

  I pay my staff to do nothing right now.