HTML tag has not analyzed properly

Similar Questions

• Agent Extension SNMP event log has not initialized properly in windows 2008 R2

  I enabled the functionality of SNMP Service and found the following error:

  "Error 2019: Extension SNMP event log Agent has not initialized properly in windows 2008 R2 Enterprise 64-bit.

  I uninstalled all related SNMP Applications and reinstalled the functionality of the SNMP Service, however, I always do face the same error.

  According to the following of Article http://support.microsoft.com/kb/128729 , this requires to contact microsoft to obtain the fix.

  I have a subscription with Microsoft technical support to download the fix mentioned the article above.

  Any help please,.

  Hello

  The question you posted would be better suited in the community pro Windows 2008.
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• "The selected printer is not available or has not been properly. Check your printer or try to select another printer.

  Hello.

  I recently got a new computer. I have installed the printer software and it successfully print a test page. He will appear in devices and printers. Device Manager says it's working properly. However, it will not print anything else. No PDF no Word document, no web pages. Right now I get the error message that I put in the subject of the message, on a gray page. I turned it works again, I removed and put the cables. I don't know what else to do. Anyone know what is happening here?

  The convenience store has found nothing wrong.

  I reinstalled the printer software.

  Once again, the error message is; "The selected printer is not available or has not been properly. Check your printer or try to select another printer.

  Thanks in advance.

  For troubleshooting, please follow the links with the steps below.

  Click on the link below to fix common printer problems:

  Solve printer problems

  Follow the steps below on how to print attachments in Outlook 2010:

  Print attachments received in e-mail messages. Outlook 2010

  Follow the steps indicated by the ZigZag3143 (MS - MVP) on this link:

  Print from Outlook.com

  Follow the steps below on how to erase and reset the printer spooler:

  Clear Printer Spooler queues and activate the Spooler Service Print spooler is the main component of the printing interface. The print spooler is an executable file that manages the printing process. Print management is to retrieve the location of the correct printer driver, load the driver, queue function calls high level in a test of the work, schedule the print job for printing and so on. The spooler is loaded at system startup and continues to run until the operating system is shut down.

  Keep us updated.

• get this pop up message "a necessary component of the Windows Media Center has not started properly. Restart Windows Media Center.

  Original title: Windows Media Center

  Whenever I try to add videos (or whatever it is) on my media center it will not add and I get this pop up message "a necessary component of the Windows Media Center has not started properly. Restart Windows Media Center.

  And I restart it, but it still gives me the same thing whenever I'll add things. I also have the Extender for my xbox 360 and video flies never show there either. A few moments ago, I got this working with my xbox and everyhting showed, now it gives me fits. Can someone please help

  Try this for me:

  Task Scheduler (Local)-> library of Task Scheduler-> Microsoft-> Windows-> Media Center-> MediaCenterRecoveryTask

  If this does not work, try this:

  1. open regedit by clicking on the start menu and type "regedit" in the search box and clicking on the link of the regedit program that opens.

  2. go in HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion

  3. click on the file --> export and save a copy of this portion of the registry where you can find later if you need IT.

  4 Note the values in the column of data to "ProgramFilesDir" and "ProgramFilesDir (x 86(). (If you have only one of those that, don't worry. I think that only users of Windows 64-bit will have both, but I don't know.)

  5. If you have a standard installation of Windows, the right for "ProgramFilesDir" column should read "C:\Program Files" and the right column for "ProgramFilesDir (x 86) ' should read"C:\Program Files (x 86)"." If they are not, try changing them to these values. To do this right click on the name in the left column and selecting Edit. Copy the 'correct' value of this message in the data value field in the box that opens. Click OK , and then do the same for the other (if you have two).

  6. RESTART. It will not work until you restart your computer.

  7. Open Windows Media Center and see if the problem is resolved.

• upgrade to 14 places elements tags has not copied

  Upgraded from photoshop elements to photoshop elements 14 12. Notice that place the tags has not been copied. any help

  (This does not work by mail, you must work your computer).

  When you click on the "reply" button, you have empty dialog for entering your text.

  The header is like this:

  

  You see the camera icon?

• BlackBerry 8530 Blackberry Smartphones has not worked properly!

  So I got my new Blackberry Curve 8530 with Virgin Mobile two days ago.
  I have the $35 / month plan with data UNLIMITED, web, & text and 300 call minutes.
  I love the phone, but I had a lot of problems with it:
  -When I download the Facebook app it says I don't have the service data to plan it and I even tried to download the v1.6 via the web instead of app world.
  -J' tried to make a BIS account and he said: he has not registered with the service and said to the multitude of the routing table thing and I did, I got the recording message and I tried to do a new BIS and it still does not work!
  -When I go to the configuration of email, it has only the option for a business account, and I want to use a personal account.
  -Blackberry maps is not in all folders or on the home screen, but it's in the options > applications folder.

  * In addition, twitter, Web app and everything work fine!

  I think that's all and I really want to know if you have solutions, and I really love this phone! I really want to know if it is a question of Virgin Mobile or Blackberry! :/ Thank you very much!

  Hi and welcome to the Forums!

  Everything you have said indicates that you don't have an appropriate plan data at the level of the BB on your BB. To use the ability to email Push RIM exclusive (among many other services), you must have an adequate data of your carrier plan. Carriers BIS (BlackBerry Internet Service) host for their BB users. In general, BIS is not available through generic data plans. Several ships make stop what is needed the Blackberry data plan. Whatever they call it, it is the carrier that delivers BIS users of BB - contact - the for assistance. Once you have a compatible BIS data plan on your BB (fees regardless of your carrier will charge, btw), then you will have personal email added to the e-mail Setup Wizard.

  • http://www.BlackBerryFAQ.com/index.php/What_do_I_need_a_Data_Plan_for%3F

  Good luck!

• A STANDARD XML TAG DOES NOT WORK PROPERLY WHEN USED IN RTF FILE FOR XML RE

  Hello
  
  I am using the following tag:
  <? If: TASK_STATUS = "Open"? > < xdofo:ctx xsl: attribute = 'block' name 'color' = > red < / xsl: attribute >
  <? end if? >
  to change the color of foreground text which, according to some conditiosi, need to print in
  PDF format using xml and rtf files reports.
  But I was able to get only 3 colors (red, blue, green) to use, other colors such as orange, cyan etc are not
  work.
  Please let me know what all the colors are supported by oracle in printing to PDF using xml reports.
  Indicate if we do a few things related to parameters or so.
  
  I'm usning 5.6.3 XML version.
  
  Kind regards
  Amar

  Colors can be expressed by a known name and a hexadecimal value. The hexadecimal format is widely used in HTML programming and has a format of #abcdef, and "abcdef" may be as aaddcc values and so on. For some primary colors, you can get away with #abc, but this is not very common.

  You should always design with colors Web safe in mind. That limited to 16, but should be much thinner (more all 16 have known names like red, cyan, yellow, etc.).

  http://www.w3schools.com/HTML/html_colors.ASP has a good explanation of the standards.

• Dynamic Flash HTMLText some HTML tags does not

  var myText:String = "< b > index term is 6 < /b > that is, term < SUP > 6 < / sub >.
  
  The tag < SUP > above does not work. The flash has ignored the tag.
  
  How can I use Super and Sub script.
  
  Can someone help me...?
  
  Thanks in advance.
  
  Concerning
  Razzak

  Thank you very much...!

  My problem was solved :)

  Concerning
  Razzak

• My computer has not extinguished properly and now firefox will not restore my last session or load pages in all.

  My computer off badly and now firefox does not load pages or restore my previous session. I tried to restart firefox and my system, but firefox still doesn't load anything. Help, please.

  The above information is on the search for profiles. Https://support.Mozilla.org/en-us/KB/managing-profiles#w_removing-a-profile Here's how to remove. CAVEAT! This will delete your bookmarks, cookies, and browsing history.

• Pilot new program installation error has not been properly installed.

  I am trying to install a program called neat receipt and I get the error message with the yellow sign that the driver was not installed correctly.

  Neat makes both software and hardware (scanners).  A problem with a driver suggests you encounter problems with the scanner, not the software.

  However, it is my understanding that newer versions of the software Neat will work with non-Neat scanners.

  Although the best place for support is here--> http://www.neat.com/support/contact-support/, we can try to help, but you must provide the following information:

  • What is the full text of the error message?
  • What version of Windows do you have?
  • What neat software version you have (How can I check which version I use?)?
  • If you have a Neat scanner, see--> http://www.neat.com/helpcenter/scanner-problems-in-neat/
  • If you have a non-Neat scanner, which is his brand and model?
    • Can you use the scanner for jobs other than with the software treated?

• PSC 2100 driver has not installed properly windows 7

  I tried for days install my printer PSC 2100 on a new laptop which runs on windows 7.  I downloaded and ran HPPSdr, Hpobnz08, HP windows printer setup wizard.  After the installation, I get the message "driver not installed"correctly".  The image of the printer is displayed in 'devices', as the loan, but does not print in any program.  Does anyone have a solution?

  Hello neonskeleton,

  Thank you very much for the response to my request.  Several times, I have uninstalled and reinstalled my printer driver from the Web site of causing changes in the electronic error hp, even to the point where my printer was 'ready' but still does not print.  In the end, after two full days of research, I learned that my lot windows needed an update itself.  After downloading windows6.1.4 B 947821 - v24 - x 64 I could finally solve the problem.

  Now I'm too happy to have a printer works and afraid to try something else.  But thank you very much for your offer

• An essential part of Windows Media Center has not started properly. Restart Windows Media Center.

  This is the message I get when trying to add files in Windows Media Center, Windows 7 Home Premium 64.

  I rebooted Media Center (by turning then windows services), conducted an analysis of the command and deleted from the database, but none of these solves the problem.

  These are the only solutions I can find online, so if someone could please help solve me this problem I would be very gratefull.

  Thank you.

  What do you mean exactly with "scan command? Please make a SFC scan, by following the instructions at http://support.microsoft.com/kb/929833 . If it finds no problems, and if so, is he able to correct? That you still get the error then?

  If this does not help, then I suggest that repost you this on The Green Button forums , there are some experts WMC.

  Tim Baets
  http://www.BM-productions.TK

• Ive got windows xp... When I turn it on it starts windows loading ok.the icon rises then atfer a black screen and a message saying that the application has no enterliszed properely.then click ok to complete the applications.still does not

  applications has not enterlislze properely.click on ok to finish the applications.i done this but still don't work

  Hi Tracey341975,

  Your computer will load at all? If operations so the following, listed in the link below. If it does not start, please in safe mode by pressing F8 black of the screen before the windows logo and select Safe mode and perform the following, listed steps in the link below.

  http://support.Microsoft.com/kb/310353

  Let us know if your computer has no errors in case of boot. If it is not it means that you have an application that is causing this error, we can identify and solve.

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Can someone explain please HTML tags and CSS styles and how to use them with external style sheets?

  I've never used an external stylesheet before and I know that I need to learn, so try it now. I've linked my page etc, but I do not understand why the html tags do not work... can I put only CSS styles in there? Can someone explain simply the best practices here? Thank you very much indeed.

  Ahhhhhhh! I have it! Thank you!

• How to get the html tags in APEX_ITEM. DISPLAY_AND_SAVE

  Hello
  
  I want to create a tabular report and want to have control of the internal cells, because later I intend to use an AJAX script here.
  
  One of the columns that I try to use APEX_ITEM. DISPLAY_AND_SAVE but here's some HTML tags are not displayed correctly.
  
  Have I missed something here. Please let me know how I can display content with HTML tags. Is there another variant of APEX_ITEM that I can use to display HTML tags as well.
  
  
  Thank you
  Vikas
  
  Published by: Vikas Krishna on November 10, 2009 01:37

  I'm not clear if the hidden form element generated by APEX_ITEM. DISPLAY_AND_SAVE is required for your purpose? Mention of innerhtml and using a standard report column leads me to think that it isn't. If this is the case, please describe what you try to do more in detail. If this is not the case, try another approach to standard column of report:

  1 change the query to return the following columns:

  replace(DESCRIPTION, ':', '
  ') description,
  rownum rn
  

  2 hide column of RN in the report attributes.

  3. change the DESCRIPTION column to return an HTML Expression:

  #DESCRIPTION#
  

  Adding ID and a class should provide connections in the subsequent treatment of AJAX. The appearance can be changed by adding a style attribute to the HTML Expression, or better styling class in a style sheet:

  .description {
    color: blue;
    font-weight: bold;
  }
  

  (Do not use the < police > items: they have been deprecated for ten years; < b > is almost always best handled with CSS.)