HTML5 audio plays is not on the shelf, but plays on the telephone in 24 FFfM

Similar Questions

• Realtek High definition audio (onboard) do not recognize the rear speakers. statics of the right speaker.

  Realtek High definition audio (onboard ASUS CG5270)-current driver v6.0.1.6043
  Operating system: Win7 64 bit

  Everything was working fine until last week. I haven't had any changes and update logs don't show updates.

  Question:
  Using "Manager Audio Realtek DD" in the control panel.
  The rear panel does not all speakers connected. (Speakers tested and work on other systems.)
  No noise at all until that I disabled the front jack detection. Now I hear threw the rear speakers but with static 1/2 volume, without mute and the "Realtek HD Audio Manager" shows still no rear speakers.

  Things I have tried:

  1. check the connections (connections of cleaning)
  2. different stakeholders.
  3. Uninstalling the drivers and software.
  4. update of drivers.
  5. Rolling back the drivers.
  6. The system restore.

  Note: the "Realtek HD Audio Manager" shows the digital connection and the façade as available, but disappeared on the rear panel, even if the rear panel is only taken in use.

  I can usually solve these problems on my own, and it's the first time that I used a forum to ask for help in 15 years. I'm just puzzled.

  Hi, reorder,

  As you have tried almost everything to fix the problem, I would like to allows you to check if the rear speakers are disabled and the volume level is fine.  To do this, follow the steps below.

  1. Click Start.
  2. Click on Control Panel and click on sound.
  3. Playback tab, click speakers and click Properties.
  4. Click the levels tab and check if the back entrance is set on mute and uncheck the box.
  5. Select the level to 100% and check if the speaker rear works fine.

  Also, you can try disabling the improvements and check if it helps.

  To turn off the improvements:

  1. access control panel

  2. click on sound

  3. Select the play tab

  4. Select entry speakers/headphones

  5. click on properties

  6. Select tab improvements

  7 disable all improvements

  If the steps above do not work, you can contact the manufacturer of the motherboard and try to reset the BIOS to default settings and check if it helps. You can also take their support and try to update the BIOS and check if it helps.

  NOTE: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from configuration can resolved BIOS/CMOS settings. Changes to settings are at your own risk

  If the above steps you may need to contact the manufacturer of the computer to verify that the equipment works very well and has to be replaced or the motherboard.

  I hope this helps. Let us know the result.

  Thank you and best regards,

  Srinivas R Microsoft Support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Media Player-ripped audio files do not display the correct album titles

  Media Player 11
  When I extract the music of a sometimes the image album and playlist that is displayed in the Media Player does not match the actual album and I have to edit by hand.  Anyone have any ideas why it is doing this?

  Also if I choose a random playlist why he always choose 2 or 3 songs on the same album and not randomly play all albums.
  Hi StuartBaker,
   
  To automatically get information from media, see the following article:
  Add or edit media information

• Windows Movie Maker - releasing only audio, is it possible to publish the exact length of the audio and does not include the lot of silent at the end?

  Windows Movie Maker - have 6 minutes of audio spliced, I would like to publish in the form of an audio clip with no video.  I heard that this is possible, and it all works, the 'framework' includes 6 more minutes of space without air circulation that gets compiled with the planned 6 minutes of audio matching 12 minutes of audio rather than the 6 minutes.  Is it possible to MovieMaker 'See' the end of my audio instend, to include 12 minutes in length with it default?  Should I include photos or video for the project to publish only 6 minutes, instead of the 12 minutes?   I hope this makes sense...

  I assume you are using Vista Movie Maker 6 and not Live Movie Maker?

  It is a problem that I've not seen before... the recorded length must be equal
  at times combined clips on the timeline. I guess it's possible
  If you've done a lot of editing/trimming clips... something was corrupted.

  I was wondering... If you import the .wma file saved in Movie Maker and drag
  it to the timeline... it shows the clip as being the length of 12 minutes? If it isn't...
  Perhaps you could he split and right click Delete unwanted 6 minutes and
  then re-save.

  Divide... drag the playback at the end of the music and the type indicator... CTRL + L
  .. .to split the file then right-click of the unwanted part and click on delete.

  Tip: Unlike clips video... audio clips can be dragged to the timeline, so don't forget
  they are dragged all the way to the left to prevent air from dead at the beginning or
  between the clips.

  It may be worth trying to go to... Tools / Options / compatibility... tab and the left click
  the "All default settings" button before the Save.

  And... If the clips audio source are not the. WMA format... it could be a useful
  try to convert them to WMA before you import into Movie Maker.

• Satellite A110-178: Audio output does not pass the low frequenties

  Hello world

  I just bought a satellite A110-178. However, the audio output of the socket minijack isn't what it should be. Frequencies of less than 200 Hz seem to be switched off. Perhaps the sound card the filter to protect the tiny Laptop speakers, but this is not normal.
  I checked all settings of windows, virtual sound is set to off, and I have reinstalled audio drivers realtek, but still no bass.

  Can someone help me please...

  Hi guys

  Have you heard something called Virtual Sound Toshiba tools?
  I think that it s preinstalled on the A110. On my laptop, this request has been pre-installed, and there are different options that might help clear this issue.

  I put t know exactly what that problem because nobody has described the problem detailed, but you should check the options in open detail settings.
  There, click on the Option button and you will get the new window with the option enable called the audio filter when the audio sample rate is less than 44 kHz

  This you should all play a bit with this good luck tool

• Problem with audio works is not on the computer.

  My audio does not work on my machine.  Do not know why. It worked on my machine for several years and suddenly left on its own.
  Will not work in chrome or IE.  I had came to try to resolve this where I work and man can't seem to make it work. Have windows 7.

  Thank you

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• Audio Please HELP - not in the Source window

  When I import a clip to PP CS6, it will only video, not audio. I can't drag the audio of the film because it does not exist in the source window. The film works well (with audio video) in any player that I tried, so the problem is not the movie.

  Here is the complete information on archive:

  Please, if you know what to do, help me, I tried this medication, I have found no solution on the web. I tried to solve this problem for the last 3 days.

  How can I transcode the clip? in a convhierter of codec? I have serached in the web, but ts kind of softwrea I think that does not exist. I'm new to editing of media, I have buyed the first pro only about 3 weeks. so, back to the question, how can I transcode codec in the clip?

  Thanks in advance, Rasputin.

• I deleted my driver sigmatel audio and can not find the download of the update to fix

  I have a dell deminsion e310.  I run windows xp I had device audio sigmatel, but I erased by mistake it. I would like to what update or download I need to solve this problem

  Perhaps here:

  http://www.Dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats?DriverID=W293Y&FILEID=2731089240

  for future reference: http://www.dell.com/support/drivers/us/en/04

  K

• Playbook HTML5 audio problem (problem of streaming media)?

  Hello. I'm working on a simple app using HTML5 audio tags. Deploy the application in virtual Playbook (BlackBerry WebWorks SDK for Tablet 2.2.0.5 - BlackBerryPlayBookSimulator - 1.0.7)

  It's my config.xml file:

  
  http://www.w3.org/ns/widgets" xmlns:rim="http://www.blackberry.com/ns/widgets"
      version="1.0.0.0">
      Radio
      
          A sample application to demostrate some of the possibilities.
      
      
          CESAR
      
      
          Example license.
      
  
      
      
  
      
      
  
      
  
  

  My index.html:

  
  
  
  
  
  
      
  
          REMOTE RADIO (works on playbook browser)
          
      
  
      
  
          MP3 (local file)
          
      
  
      
  
          REMOTE FILE
          
      
  
  
  

  Remote stream (shoutcast radio) and remote files (ogg, http://blackberry.github.com/WebWorks-Samples/kitchenSink/html/html5/audio.html) does not work on HTML5 app.

  In streams remotely, the error was: "there was an error decoding of this media. "The multimedia format not supported".

  What's wrong?

  What can I do?

  Now I know what was my mistake: the URL does not contain a stream, only a playlist (PLS) with multiple URLS to to access the stream. For more details you can see:

  http://en.Wikipedia.org/wiki/PLS_%28file_format%29

• Audio service does not work, error 0 x 80004005: unspecified error

  I have problems with my laptop in regards to the audio service does not. The sound icon has an x on it and ran the SCP prompt automatically update/fix drivers without success (may have spelled promot hurt, but it was the solution to many similar forum messages). I also tried to uninstall the audio driver and put it back, however when I run the driver installation an error message appears and says that Windows Audio is not running and needs in order to perform the installation. I went to the system administrator and seen the services menu and went to windows audio properties. I tried from the program and the error message "error 0 x 80004005: unspecified error" comes up. All dependent services for the Windows Audio are running, so I came to a dead end. The only thing I can think of that would make the audio not working do not is my battery. My battery is in poor condition and needs to be replaced, so I always us the AC cord to power the computer. Depends on Windows Audio battery somehow or something of this nature? If so, is there anyway around this until I can buy a new? Thanks for your help. Clay

  You say you have Vista - therefore, you the Vista drivers, drivers for W7!

  See you soon,.

  Jerry

• System could not find the environment option that was entered.

  The Trend Micro Client caused a bit of stir in my computer.

  He gave me the UiSeAgnt.exe error and I couldn't open any .exe files. I uninstalled Trend Micro and that pop up more rises. But the "System could not find the environment option/variable is entered" is yet to come when I try to run the .exe. This means that same cmd cannot be opened. I can not connect to the Internet independently wireless or wired. Audio system is not even the sense system speakers or external audio devices.

  I tried the system restore, did not work. I tried SFC/scannow, did not work. Now my current idea is to back up my files and blow the computer on with a clean restore. What should I do? I use a Vaio E series 14 p, btw.

  If it really comes down to it, how much memory should I backup everything?

  Hi Vey,

  Thanks for posting your query in the Microsoft community.

  Your system is connected to a domain network?

  This problem occurs in situations where Shutdown.exe cannot access the UserDomain environment variable. The task of the judgment which is on demand by using the at command runs under the system account. When the task is run under the System account, the UserDomain environment variable are not accessible because it does not exist. But the problem occurs mainly on the areas of server.

  I would suggest trying the following steps and check if these help to resolve the issue.

  1. start your system in safe mode.

  2. press on the Windows key + R.

  3. type sysdm.cpl , and then click OK.

  4. click on the "Advanced" tab

  5. in "Startup and recovery", click "Environment Variables".

  6. under "System Variables", click 'new '.

  7. for "Variable name", type in windir%

  8. for 'Value of the Variable', type in C:\Windows

  9. click OK on the all the dialog boxes that pop up.

  10. restart your system in normal mode.

  If, however, your system is connected to the normal mode, please see the following support article.

  Computer does not and you receive an error "System cannot find the environment Option that was entered" when you schedule a task of closing using the AT command

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Could not insert the voice above as WAV in Captivate 9

  Hello

  I'm at the stage in my project where I recorded the voiceover and now I just need to add on the slide in my project. Easy, you'd think! I am a newbie to Captivate 9. Use audio Camtasia, so do not think that this is a problem. But now, at this hour enth, I'm stuck.

  I use the Add Audio button in the property inspector, and that's what I have... As you can see, my audio is WAV but Captivate is always complaining.

  This is my project to an abrupt stop... Your timely assistance would be most appreciated. Here is a screenshot. Thank you very much.

  

  This error message is probably because your audio files are NOT of the right depth and type for Captivate.

  You are on the right track using WAV files because they are decompressed and retain the maximum amount of audio data.

  However, you probably didn't know that these WAV files must be 16 bt PCM, not 24 or 32-bit.

  I hope you have Adobe Audition or some other app that you can use to convert your existing audio files to this format and then you should be able to import them into audio editing Captivate.

• Firefox does not play HTML5 audio

  My Firefox installation (v33) does not play HTML5 audio.
  I am referring to audio tracks (MP3) you can listen to on your personal Google Reader. The stream does not start, there is no time of the track being filled.

  -Youtube HTML5 player works great both for Audio and video
  -J' tried Incognito mode (without cache and cookies)
  -Tried restarting without Add - ons (I use Adblock and other stuff)
  -Tried to restore Firefox.

  None of these permits.

  -V38 IE11 and Chrome, the browser listen very well
  -A clean Firefox (on my virtual machine, for example) very well disseminate

  Any tips?

  EDIT: SEW I'm touched by it? https://Bugzilla.Mozilla.org/show_bug.cgi?id=911837

  You can file a bug in the Mozilla bug tracking system: https://bugzilla.mozilla.org/ (see: https://developer.mozilla.org/docs/Mo.../Bug_writing_guidelines)

• audio files do not play sound after the restoration of the links

  I recently moved to a project from one disk to another.

  When I opened it the project folder I had to recreate a link to all the media which seemed to have a lot of success. However the audio files do not seem to play any sound. When I tell one of the audio files in the finder window, it take me for an alias file. When I try to open this file, it indicates that the original file cannot be found.

  I tried to remove the entire library of files sound and re-import them back in. But still, it does not solve this ridiculous issue.

  Any suggestions?

  Thank you

  Karl

  Are music protected audio files?

  Russ

• Audio plays more when Firefox is not the 'active' application on the desktop

  Just updated to the latest version (10.0.1). Audio plays now is more if Firefox is not the 'active' application on the desktop. In the past, I was able to open the Firefox browser, go to a site to listen to the audio, then go to another application on my computer and the audio would play again through my speakers from the firefox website. Now if I do that I lose audio, unless firefox is the 'active' application, which means that if the bar blue top on the browser is blue and not dimmed. I tried the Add on "Always on top" and this does not solve the problem I have. I looked through the various settings and did not see a solution. Can someone tell me if it's change-able or if it will be is no longer possible through browsers firefox?

  DOH! Feel like a jerk! Understand my problem! Sorry! Uh, I (or probably any other) had put the audio for the other app I was using (Avid editing software) on mute, causing the audio does not sink when the firefox browser was not "active".
  Someone else has a similar problem should check to see if the other application you use has the sound 'on '.