HTML5 - button with UP, States OVER & DOWN instance?

Similar Questions

• Button loses its States when scripted

  HI -.
  I made a button, there is ' know - with the Up, over, down, States of Hit. It was working fine.
  Then I wanted this slide button on the screen so I made a new MC and put the button in it with a motion tween. It works very well.
  Then I needed the key (with the instance name "btnSlide3") to display text in a dynamic text box (named "description_t") elsewhere on the stage if I actionscripted onRollOver and onRelease functions. These work but - buttons no longer have their States above and down. So I can have the text appear OR the button States BUT I need both. What I've done wrong? Thanks for any help. Here is the ActionScript for the functions:
  
  
  

  btnSlide3 is NOT a button. It's a movieclip.

  and you have applied to managers of mouse the movieclip parent of your button, NOT for your button so your button never sees a mouse event. mouse events are intercepted by the parent movieclip.

  to remedy this, apply your managers of mouse to your buttons, not their parents.

• Problem of FW CS4 export buttons with rollover to dreamweaver

  Fireworks newbie here-

  I created a button with several States in fireworks cs4 and have problems exporting to Dreamweaver.

  (1) if I have the file-> Preview in the browser by the key works fine.

  (2) if I export using the "HTML and Images" export option, my button works correctly.

  (3) but if I export using the "CSS and Images" export option, my button does not work. When I take a glance at what has exported to Dreamweaver, I notice that only the gif for the up State was exported and I also notice that no javascript code has been exported.

  I'm stumped, any suggestions?

  Yes, your observation is correct. Export CSS + Images does not include Javascript, only the texts, the slices of rectangles and images. JavaScript is only included export "HTML + Images", which is a traditional prototype export. It creates fixed, based on tables layouts is not really suitable for production sites.

  As far as I know, the two workflows is not interchangeable and is intended for different purposes. If you go for export of CSS and other changes in DW, I recommend to use CSS for your States of button sprites. Also, if you go this route, it is a good idea to familiarize yourself with the features and limitations of export CSS + Images:

  http://www.Adobe.com/devnet/Fireworks/articles/export_css_images.html

  We have members with more knowledge in this area - I know not that they will help out you further. Good luck!

  SiamJai

  --------------------------------------------

  Fireworks innovative tutorials

• Radio buttons with drop-down menus?

  I have created a form for the HR Department of my company, and I need a few radio buttons with dependent drop-down lists.

  In other words, I would (for example) three radio buttons. None of the drop down lists appear until one of the buttons is selected and displayed the appropriate drop-down list. Is this possible? Or is there a better way to do it? I don't want a drop down menus not selected to be available.

  I have 9 Pro for Windows and Pro X for Mac. I know almost nothing about scripts, but I know it can be done.

  Thanks in advance for any help!

  Theresa

  Add this code to the action of the group, or individual radio button actions?

  For each individual button.

  Make the drop down menus visible or hidden?

  Their visibility will be determined by the State of the radio buttons. By default, you can set to hide, when no radio button is selected.

  Can I put any code in the drop-down list properties, or just in the radio button properties?

  Only in the option boxes.

  And when you say "integrate this code at the level of the doc", does that mean?

  Go to Advanced - Document Processing - Document JavaScripts...

  Create a new script, delete the default text that appears in the window, and paste the code I provided instead.

• HTML5 - button two Instances Instance w/same name = does not?

  I create a build directory, it has a menu of many buttons that link to different offices on floor plans.

  The main directory buttons move the timeline to frames that display different floor levels and indicate the location of the Office on this floor.

  The floor plan has also buttons of the same Instance name as in the buttons of the main directory for users to click to identify other offices.

  For example, two buttons with the same name should fire when the receiver detects a click, pulling the same function (go to image tag)

  A button in the nav man directory - to locate where the office is located.

  Another button on the floor plan view, with the same Instance name to move the timeline with the same function as the button on the main directory; Another way to navigate the directory of construction by identifying other offices at the same floor.

  

  This only works when a door button the Instance name, it does not work when there are two buttons with the same Instance name.

  Why on earth would that be a problem? Why everyone should have many Instance names to the same function? Why would the care of code that touches raise the event to the listener?

  It is almost double the increase in the size of file and code!

  Or am I missing something?

  Thank you.

  as much as I know, who would not work in any programming language.  You cannot have multiple instances of the same name and expect no problems.  fix this.

  PS you can have several buttons call the same function of earphone.

• Problem with a menu drop-down dynamics based on instances of subform

  I'm having a problem with a dynamic drop down based on instances of subform.  Here's my question:

  Subform1 = value 1 and is repeatable
  Subform2 = Subform1 to 1 and is repeatable
  Subform2 = value 2 to Subform1
  Subform2 = value 3 to Subform1

  Subform1 = value 2 and is repeatable
  Subform2 = Subform1 to 1 and is repeatable
  Subform2 = value 2 to Subform1
  Subform2 = value 3 to Subform1

  I can fill my first run down the 1 subform values by the following:

  var nCount = Subform1.instanceManager.count;
  Console.println ("nCount:" + nCount);

  
  for (var i = 0; i < = nCount; i ++)
  {
  var vFld = xfa.resolveNode ("Subform1 [" + i + "]");
  vVal var = vFld.Val.rawValue;
  this.addItem (vVal);
  }

  
  It gives me 1 (Subform1) value and the value 2 (Subform1)

  I'm now trying to fill a second drop down based on this drop down selection.

  For example:

  If the value 2 (Subform1) is selected in the drop down, I want the secodn drop-down is populated with the value 1 (Subform2) and the value 2 (Subform2) and 3 (Subform2) value for 2 value Subform1.

  I appriciate any help I could get on it.

  Thank you
  Eagle

  Hello

  Ah ok, so I think that it's the one- https://acrobat.com/#d=nddInIuQUwXMY8ciRPoOfw

  Hope this helps

  Malcolm

• How to access a State of buttons with code

  Hello

  I already have a few buttons which I planned on using as a menu for the difficulty, easy, medium, hard. The buttons are already made with all States and graphics, then I wanted to add an event listener so that when you click on a button for example simple, if the middle button was to its state of success I have he would return back to upward, for example:

  easyButton.addEventListenere (MouseEvent.CLICK, function(e:event) {mediumButton.gotoAndStop ("up") or mediumButton.up

  but then I realized there no properties or function in the simpleButton class to change the State of the button, I know I can do a movieclip and I Stop at the top image, but is there a way to make it work like a button?

  Buttons in Flash back a long long way. In previous versions you could not access by name buttons and they were really shaking and odd. Users of dropped and developed more serious Flash from buttons of the movieclips.

  I don't really know why they did not set them when they have updated the AS3, but there you go! I guess it has something to do with the idea of keeping them simple.

  With respect to visibility, be sure that you set the visible property and not the alpha. A button with zero threshold alpha will be rolloverable, clickable, etc..

• Slide with several digital poster Down filter event Bug button?

  A key event filter on a slide with several digital screens down does not work as expected when not waived. If you for example tab of this slide with two digital screens digital display, the cursor remains on his position, rather than get KeyFocus to the next control. Same behavior at fault if you want to move the cursor on the left/right keyboard, nothing happens. Anyone an idea why?

  A simulation of that VI is attached. All other controls, a Slide with a digital display or a standard digital control, the key Down event filter behaves as expected... I tested in versions 8.5.1 LV (attachment), LV2012SP1 and LV2013.

  A teammate now found a solution or workaround. We do not know if this is the way it should be, if yes, then it's a bit hidden, but it works!

  It seems that the cursor needs to know on what digital display the FocusObj is when you use the event notifier KeyDown. Then, when to get the reference of the digital display active and the wiring of this reference to the terminal FocusObj filter event everything works as expected, numbers of tabs, typed, cursor etc and have to filter and notify events structure to the event.

  A vi and a printscreen are attached.

  The question is probably due to the specialty of slides and the class NumericWithScale in general, as its digital displays are a little under References and during the implementation of the features of event KeyDown for the class NumericWithScale filter, LV simply does not know on which side of the main action control part must be executed.

  Or someone has a better solution and explanation?

• MultiDPIBitmapSource with the States

  Hi all

  What is the right way to use the MultiDPIBitmapSource class with state changes:

  I do a skin for simple button that uses an image and replace the image source according to the State. The following code captures the State. The image will remain in the normal position and never capture more or down events and swap for the appropriate source. This seems possible, or is seized semiautomatic in Flash Builder. What I'm doing wrong here?

  Example:

  {code}

  <? XML version = "1.0" encoding = "utf-8"? >

  < name s:SparkSkin = "myButtonSkin.

  ' xmlns:fx = ' http://ns.Adobe.com/MXML/2009 "

  xmlns:s = "library://ns.adobe.com/flex/spark".

  ' xmlns:fb = ' http://ns.Adobe.com/FlashBuilder/2009 ">

  < s: states >

  < name s: State = "mounted" / >

  < name s: State = "over" / >

  < name s: State = "low" / >

  < name s: State = "disabled" / >

  < / s: states >

  < fx:Metadata >

  <! [CDATA]

  [HostComponent ("spark.components.Button")]

  []] >

  < / fx:Metadata >

  < s:BitmapImage >

  < s:source >

  < s:MultiDPIBitmapSource

  source160dpi="/assets/images/icon160.png".

  source240dpi="/assets/images/icon240.png".

  source320dpi="/assets/images/icon320.png".

  source160dpi.over="/assets/images/icon160over.png".

  source240dpi.over="/assets/images/icon240over.png".

  source320dpi.over="/assets/images/icon320over.png".

  source160dpi. Down="/assets/images/icon160down.png".

  source240dpi. Down="/assets/images/icon240down.png".

  source320dpi. Down="/assets/images/icon320down.png"/ >

  < / s:source >

  < / s:BitmapImage >

  < / s:SparkSkin >

  {code}

  I found what I was doing wrong. Here is the solution:

  <>

  source160dpi="/assets/images/icon160.png".

  source240dpi="/assets/images/icon240.png".

  source320dpi="/assets/images/icon320.png"/ >

  <>

  source160dpi="/assets/images/icon160over.png".

  source240dpi="/assets/images/icon240over.png".

  source320dpi="/assets/images/icon320over.png"/ >

  etc... If the source tag actually takes the State, not the MultiDPIBitmapSource.

• Where is the button refresh and the drop down menu the menu to go to previous tabs

  Usually, there is a button to refresh/reload the page in its current state. You can also click Next for the "previous or next page" arrows and have a list of pages viewed before if you can select one of them to go back to not necessarily just the previous page. I guess you could just keep clicking on the arrow to the left, but it is really not satisfactory. I used these two features all the time and it is a definitive failure in the new version.

  Combined Stop/Go/Reload button
  
  From Firefox 4, the Go, the buttons Stop and reload are combined into a single button at the right end of the toolbar URL or address. The button changes depending on the type of activity:

  • green arrow GB when you type in the address bar
  • Red Stop ("X") button while the page is loading
  • Reload (circular arrow) to gray when the page is finished loading.

  There are separate buttons:

  1. Open the Customize the toolbar by clicking the Firefox button > Option > toolbars OR by clicking View > toolbars > customize if using the menu OR bar right click in an empty space on a toolbar and select Customize
  2. Stop and Reload buttons will show separate from the address bar and the search bar
  3. Drag the buttons anywhere on the Navigation toolbar
     • order Reload-Stop will bring together into a single button
     • order Stop-Reload will remain in separate keys
     • or drag a 'Separator' or 'Space' in the window customize between Reload-Stop and they will remain separate OR separated the two buttons with any other button
  4. Click done at the bottom right of the window customize to finish

  See: https://support.mozilla.com/en-US/kb/how-do-i-customize-toolbars

  Button front/rear
  
  To access the history tab on the previous/next button, you can:

  • Right-click on the previous/next button
  • HOLD the left click button rear until appears the menu drop-down

  You can also install this add-on to restore the marker drop on the previous/next button:

  • https://addons.Mozilla.org/en-us/Firefox/addon/backforward-dropmarker/

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• State multi objects - how to create a State asset/down AND a visited State Captivate 9

  Hello

  I hope someone might be able to help me understand how I am best at what a "assets/down" State and a "visited" .

  I have a screen with a number of buttons - when the learner clicks on a button, they appear different information (easily click reveal sort of interaction) can I do now with the functionality of the State multi 9 Captivate object.

  But can I use "States" to show that they have visited a button.

  The scenario is as follows:

  
  Screen has 10 buttons.

  By example, Normal (not yet visited) - button is blue.

  Active/low (learner has selected the button)-button is purple.

  Visited - button is green.

  Thank you.

  Lisa

  Sorry, but Lisa doesn't quite ask on built-in States (Normal, Rollover, Down)! Read each question carefully, please.

  She questioned an integrated State and a State of 'Clicked', which is NOT at all.

  @Lisa the easiest way is to States. I use above all form buttons, because they are much more flexible than the old types of buttons. You see in this Panel of State of the object, I've changed the text on them and rolling to the bottom of the State, which is impossible for the transparent buttons and text and for text image buttons must be in the image, which means that whenever you want to change the text, you must re-create the three images. Not very friendly, because it must still occur in another program.

  

  You see that on top of the InBuilt three States I created a custom state "Clicked". Do not confuse this Panel: the button has the same size as in the integrated States, but the thumbnails have a fixed size, where the last State of the scene shows that three States integrated.

  If you want the State Down to be the same as the clicked State, you can do it as well, but I wanted to show that it's a different State. With this configuration, you can have the Clicked State, replacing the Normal State (attention: the flyover States and down will remain the same) after clicking on the button with this workflow:

  • Create a tip or shared action standard (in this article, I used shared actions: 1 share = 5 buttons toggle - Captivate blog )
  • Add the command "change the State of MyShapeButton, Clicked
  • Put the command you want to be executed by this button (like the jump to slide X)

  If you navigate away from this slide, the "Clicked" State is only kept in 9.0.1.320 - not in the previous version - if you check the option "Maintain state on the overview of the slide" which you will see in the upper part of the properties of the button panel.

  I would like to know if that's what you're looking for? If you want to have the rollover state change, you will need two buttons and will have to replace the first box of the other which shows all States in a version Clicked.

• Buttons with multiple actions do not work in v32.1

  We had buttons in our previously published folios that bring a multi-state object to state first and second MSO to another State that depends on which button is pressed. It works in app v32.0 and down, but it no longer works after trying to update our v32.1 app.

  If it is possible to have buttons with more action, I think we should be aware in What's New Relaese v32.1 Notes. Because it is not get ourselves as a bug. Can someone please tell us whether this is a permanent change button feature in DPS folios or is it happens by mistake?

  The fix for this was released Monday afternoon hour of Seattle.

  Neil

• Can an edit button in another State and stay there and navigate to a URL?

  Hi-

  I've been trying my brain and scouring the internet since yesterday to find a solution to this... It seems pretty easy, but I'm at a loss... maybe I'm over thinking that it and it is simply not possible?

  We have a button that we want to, when you click it, change to another State, to remainand also use a navto to go to another page in the publication... is it possible?

  We tried to double the action of the button, with fake buttons, etc. all this without success. What we now have is... You can type in navto and the button changes, but right now between the button is released and actually jump to the page, we want to go to, it returns to its previous state.

  The only explanation I came up with is based on the information on this page: http://help.Adobe.com/en_US/digitalpubsuite/using/WS67cb9e293e2f1f60-8ad81e812b10bfd837-80 00.primeras html -because I want to accomplish two actions fall into two different categories: support for the actions of the buttons of hyperlink and sustained actions for the slide show buttons, that is simply not possible?

  Your help is greatly appreciated!

  Thank you

  Kristina

  No, which is not supported with several actions. Impossible to move from one State and then jump to another document.

• * URGENT * buttons within a menu "drop-down" don't work well...?

  I have a 'drop down menu ' (which is in fact silent...) with 4 buttons on the inside. The menu BG is just a movieclip containing the buttons. The problem is, when you hover over a button of the menu drop-down retracts. How do I get flash to examine the buttons to be part of the background, so he doesn't think you're mousing on when you hover over the buttons?
  
  Here is a link to the FLA and the code. Any help is greatly appreciated! I tried to make it work for more than five hours and I'm extremely frustrated.
  FLA:
  http://www.mediafire.com/?hro25c9sbfrd4wc
  
  Code:
  http://pastebin.com/nUG6mrVP

  The berries are unnecessary because 1) they have scope in functions 2) you create a new one for each tween.  If this code from a tutorial, you'll do yourself a favor to abandon the one who wrote it in the future.  It might be that you just revised the code without knowing how it should be done given that other aspects of your code that are simply false as well.  Change the following and see if it works...

  Import fl.transitions.Tween; you only need to import once
  Fl.transitions.easing import. *;
  Import fl.transitions.TweenEvent;

  var menuTween:Tween;  declared outside any function interpolation

  flooringMenuBG.addEventListener (MouseEvent.ROLL_OVER, fl_MouseOverHandlerIn);

  function fl_MouseOverHandlerIn(event:MouseEvent):void
  {
  menuTween = new Tween(flooringMenuBG,'y',Back.easeOut,170,90,8,false);
  }

  var fM_listenerOut = flooringMenuBG.addEventListener (MouseEvent.ROLL_OUT, fl_MouseOverHandlerOut);

  function fl_MouseOverHandlerOut(event:MouseEvent):void
  {
  menuTween = new Tween(flooringMenuBG,'y',Strong.easeIn,90,170,10,false);
  }

• Custom animated buttons with buttons?

  I am trying to imitate another aspect and the conviviality of a program, but I did not quite understand how to make a custom button, with a turnover. Can I import an image is easy enough, but there no substitution effect, and I don't want to use one of the buttons they already have. Am I missing something simple

  What you have to do is create three versions of your buttons: top, over and down. The 'up' version is for the button when it is not hit. The button "more" when he was overthrown but not clicked on, and the 'low' version is when it is clicked on. You can have the 'over' and 'down' versions to be the same if you don't want it to look at different when you click on it, as opposed to a little enclosed. You would name your files like this: button_up.gif, button_over.gif, button_down.gif. When you select one of these versions when you insert an image button in Captivate, Captivate will automatically choose the other two versions of the rollover button, as long as they follow the names above (_up, anime_survol, _down) naming conventions, and are in the same folder.

  I hope this helps.
  -Maureen