HTML5 Canvas elements do not receive focus

Similar Questions

• An option button in the group do not receive focus

  I have a radioGroup of 4 defined buttons.  3 are able to receive focus when my mouse is pointing on the button.  Can not receive focus when the button is turned on.  I don't see anything different about that special touch.  All 4 are able to receive focus when the text rather than the corresponding key is indicated. I deleted and recreated the group with the same result.  It's a question that everybody knows?

  I am working in Flex Builder 3.

  Thank you.

  Glad I could help.  I ran into an issue just as much time, so thought it was something like that.

  If you don't mind, can mark you this thread as a response?  Thank you!

• Component of the Web will not receive focus

  As you can see from the attached code, I have 2 TextInput fields, followed by a canvas. I wish that the canvas to receive focus after I tab off the second field, but it isn't, even when I set the following properties of the canvas:
  
  1 focusEnabled = true
  2. tabEnabled = true
  3 tabChildren = false
  
  The design of the development side, shouldn't the canvas keyFocusChange event be shot after I label off the second field?
  
  Any help would be GREATLY appreciated!
  
  Thanks in advance,
  Moshe
  

  Ah, success! Apparently, to receive the focus component must implement the IFocusManagerComponent interface. Strangely, canvas has all the methods required for all he need do is create a MXML component that implements mx.managers.IFocusManagerComponent. Well, it's more set the tabEnabled = true and focusEnabled = true (tabChildren = false was just a wild guess at the beginning, I had which turned out to be useless).

  In any case, hope this helps someone save a few minutes.

  See you soon!
  Moshe

• Animate CC (HTML5 Canvas) timeline is not synchronized with audio

  Hi, I am experiencing problem with synchronize the audio file with the time line set, cadence Adobe animate the value 24 fps, audio don't play with according to the number of frame in the timeline.

  It is possible to solve the problem with Javascript. Here is the example code that will make the animation in real time:

  var starttime is createjs. Ticker.getTime ();

  createjs. Ticker.setfps(25) (24);

  this.addEventListener ("check", movealong);

  self = this;

  This.Stop ();

  function movealong() {}

  var = now createjs. Ticker.getTime ();

  var f = Math.floor ((now-starttime)/1000 * 24);

  self.gotoAndStop (f);

  }

• Converted file from Flash to HTML5 Canvas does not publish

  Hello

  • I use a Mac.

  • I have an existing Flash file, operation which publishes fine.

  • Convert to HTML5 Canvas using the command-> convert to other Document Formats-> HTML5 Canvas

  • Do not make any changes to the settings of the HTML5 Canvas publication

  • Select "publish."

  ... The .html file displays only a blank white block, the size of the Flash file.

  I tried:

  • Create a new HTML5 Canvas file and paste the existing content in this

  • Copy the script action layers of the original in the Web a Flash file

  • Check the settings of publication for something unusual

  Any help is appreciated.

  Looks like the JSON file which poses problem. You can disable the spritesheet option in settings of publication, and then your multiple bitmap files can operate locally as well.

  Regarding Javascript errors, those that are produced inside the code CreateJS, you wouldn't want to be messing around with it! They are only security errors, or the consequence of something that does not not due to security restrictions. You will not get the errors when files are online, or if you can disable the sprite sheets, I suspect.

• Animate CC (HTML5 Canvas) chronology cannot choose stream in properties > Sync to sound

  Hello

  I have a problem. Animate CC (HTML5 Canvas) timeline is not Stream select Properties > Sync for the sound.

  This section examines passive. Why would it be.

  Thank you.

  

  HTML5 Canvas only supports the synchronization of its event. You can use a document of ActionScript 3.0 for audio streams.

• Firefox Inspector not to focus on the element by click on inspect.

  The new firefox for developers is out, I downloaded and used as your primary browser.
  However, I discovered that the Inspector not to focus or show the direct element that I inspected. He just open the inspector window & show the tag of the whole body.
  Is this something new to Firefox? or from the Add-ons of mine?

  This happens to you all the time or only in specific cases?

  This can happen if the elements are no longer present if the focus is removed from the web page that will happen if you try to inspect the item via the context menu.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• "mouseup" does not not in HTML5 canvas

  Hello

  I created a HTML5 canvas where the main timeline is supposed to play so that a button is pressed and stops when the button is released. To do this, I need to stop the "tick" on mouseup event. However, mouseup does not work. I tried to use mouseup on the btn_plus.addEventListener as well (only for debugging purposes), but it does nothing. "mousedown" and "click" works as expected.

  (The next step is to create a back button with similar functionality, this is why I do not use the play/stop to control the timeline.)

  Any input would be much appreciated.

  Thank you.

  This.Stop ();

  This.btn_plus.addEventListener ("mousedown", keyPlus.bind (this));      increase button. "mouseup" does not work here either.

  function keyPlus() {}

  this.addEventListener ('check', increaseDown.bind (this));

  this.removeEventListener ("mouseup", increaseDown.bind (this));      //Trying to remove the ticker here - does not

  }

  function increaseDown() {}

  this.gotoAndStop (this.timeline.position + 1); magic happening here

  Alert ('increase pressed');

  }

  Try, "pressup.

• Button not clickable image in HTML5 Canvas export?

  Everyone knows about this problem when you use an image as 'up' frame for a button symbol makes it not clickable when HTML5 canvas export?

  Image button works when I "found" in Adobe animate CC, but when I export, it is not clickable, nor shows more status etc..

  I tried to convert the image into an image in a button and a clip in a button, but does not solve the problem.

  When I switch the contents of the frame button to a vector shape, it works fine.

  Any ideas would be greatly appreciated.

  Buttons do not seem to work perfectly. Even with the first image that contains a bitmap image.

  Check if you use spritesheets. If you are and it's a JSON file, then things break. Use either don't not spritesheets, or put your files on a test server.

• On the mouse does not work in iframe (HTML5 Canvas)

  Hi, I use the HTML5 Canvas option in Flash CC for a banner ad.  I have a button, and I gave him a rolling & out entertainment.  Like this:

  this.clickthrough_btn.addEventListener("mouseover", over.bind(this));
  
  function over()
  {
    this.cta.gotoAndPlay("over");
  }
  
  
  this.clickthrough_btn.addEventListener("mouseout", out.bind(this));
  
  function out()
  {
    this.cta.gotoAndPlay("out");
  }
  
  

  Which works perfectly fine, until the ad is actually in an iframe, which is how HTML5 banners are displayed on different sites.  When it is in an iframe, it seems not be able to detect when I move my mouse over the banner.  Is it possible to fix this? I don't really want my steady state to be stuck.  Any suggestions are appreciated!

  I found this, but it doesn't seem to work with my code: http://stackoverflow.com/questions/1058085/iframe-onmouseout-capture

  For those who wondered about this (it's a pretty big deal for banners), thanks to geniuses (Blake) on the forum of Greensock.com banner, I now have a concrete example of mouse out in an iframe using canvas.  It took just targeting the canvas instead of the scene or a key area which covered the entire scene.

  Here's a look: http://plnkr.co/edit/rDtONIWD5Jgrpd8Ax7oL?p=preview

  And here is the corresponding code:

  
  //Mouse interactions
  
  canvas.addEventListener("mouseover", over.bind(this));
  
  function over()
  {
    this.cta.gotoAndPlay("over");
  }
  
  canvas.addEventListener("mouseout", out.bind(this));
  
  function out()
  {
    this.cta.gotoAndPlay("out");
  }
  

• HTML5 Canvas (in Flash (CC) button defective functionality - more States out of service do not work

  I've searched and searched and I can't find a solution.

  In CC Flash, creating in a canvas of Actionscript 3.0, buttons work as expected. Up, more, Down, and Hit States desired to produce results.

  I am creating a lively HTML5 Web page and none of the buttons work as expected. Here are the flaws:

  1. There is no hand when scrolling on a button. It is a problem because there are several objects on stage, of which only half are buttons. The user must be able to know which are clickable.

  2 when I have a picture on the up State, all right. But when I add an image to the over State, it causes a loop. Above all loop in the preview and after that I have to publish regardless of the cursor position and the type of browser (IE, FF, Chrome).

  I searched on the web. A lot of people have this problem, but no answers have surfaced. I don't especially want another 100 hours recreating beachfront animate - which I am not as familiar with. Y at - it a code that can stop the madness?

  At the end of the day, all I have to do. I have fixed all through the timeline. Now everything works!

  HTML5 canvas dislikes tween buttons. He'll do it, but if the buttons contain animations, things go wonky. Instead, I got the bitmap of the tween flash button and once the animation is complete, I've changed over the bitmap for the button in the next keyframe, so that the user can click on it. Its softness, you do not see a hiccup. States of flight hover-over worked after that as the hand.

  Hope this helps other people who have this same problem.

• Message received when openning the Adobe Premiere elements 12 'not possible to initialize the services online' what should I do?

  Hello

  How can I solve this problem?

  Message received when openning the Adobe Premiere elements 12 'not possible to initialize the services online' what should I do?

  Thanks in advence

  FL

  FLOureiro

  What operating system is running your 12 items first? Have you updated to 12 to 12.1 update using Help Menu/implementation of an open project? If this isn't the case, please do.

  For your immediate problem, did you update Online Services in the preferences?

  Where are you in the program when you get the message "failed to initialize the services online.

  You are in a country outside of the USA?

  There are some online services that are simply not available outside the United States.

  Please check and review and then, based on your details, we will consider what then.

  Thank you.

  RTA

• Curves are not smooth in html5 canvas

  Hello
  Is there a way to get a smooth circle/curve in html5 canvas.
  The circle is a shape within a clip.
  It's that I'm
  
  It's what I expect: -.

  

  Thank you...

  The illustration of what you expect is about 130 X the resolution of what you get. So I don't know what you're hoping for. Low-resolution vectors are inherently less smooth than the vectors at high resolution.

• Do html5 canvas documents.

  My company does a lot of e-Learning that requires our content is 508 compliant (accessible to people with visual impairments).  With actionscript, we could either give back the focus to items on the screen (text, graphic, button, etc.) with actionscript (tabIndex, accProps) or if it for some reason any doesn't work, we could use the accessibility window to force the screen reader to search for items.  Now, when you create a html5 canvas, the accessibility window is gone all together.  I tried to find references to an equivalent code in JS or html that would replace the tabIndex and accProps scripts that we used before to make our content accessible, but have had no luck.  In the Adobe documentation for accessibility in Animate, they say if you want accessibility, design for actionscript 3 What kind of defeats the purpose of using Animate to convert our content which requires 508 compliance.  He saw someone about how this could be achieved in animate when creating a canvas of html5?

  The problem is that HTML5 canvas text cannot be read by screen readers because once it is made, it's just pixels, not text. To work around this problem, you have to hide the content text 'under' the canvas element, where it is invisible to the user, but accessible by screen readers. Googling "html5 canvas 508" brings up some read about it, like this: https://www.paciellogroup.com/blog/2015/02/html5-canvas-sub-dom/

  Or you can simply include the full text of the lesson in PDF format and call it the version 508 compliant. It's legal!

• How to call a function of my html code to js created by animate cc, I had used 'exportRoot.functionName' and said this function in my document of flash pro with html5 canvas, but now on cc animate this way doesn't work.

  My html code created by animate cc was changed to php for me, because I send and received variables via get and catch the cookies and much more. the function that I used to call function on my .fla of the document is passId() and it worked before when animate was Flash pro with html5 canvas.

  

  And function of .fla, I frame_0 only assign to the variable "id_usuario", this is the feature on fla:

  

  First of all, the title of your thread is horrible. Titles are supposed to be securities, not paragraphs.

  As for your problem, you are probably trying to call catchIdUser before it is defined. handleComplete() is raised when the content is ready to run. He did not actually yet. I guess you should have script code call the function of window parent, not the other way around.