Component of the Web will not receive focus
As you can see from the attached code, I have 2 TextInput fields, followed by a canvas. I wish that the canvas to receive focus after I tab off the second field, but it isn't, even when I set the following properties of the canvas:1 focusEnabled = true
2. tabEnabled = true
3 tabChildren = false
The design of the development side, shouldn't the canvas keyFocusChange event be shot after I label off the second field?
Any help would be GREATLY appreciated!
Thanks in advance,
Moshe
Ah, success! Apparently, to receive the focus component must implement the IFocusManagerComponent interface. Strangely, canvas has all the methods required for all he need do is create a MXML component that implements mx.managers.IFocusManagerComponent. Well, it's more set the tabEnabled = true and focusEnabled = true (tabChildren = false was just a wild guess at the beginning, I had which turned out to be useless).
In any case, hope this helps someone save a few minutes.
See you soon!
Moshe
Tags: Flex
Similar Questions
-
An option button in the group do not receive focus
I have a radioGroup of 4 defined buttons. 3 are able to receive focus when my mouse is pointing on the button. Can not receive focus when the button is turned on. I don't see anything different about that special touch. All 4 are able to receive focus when the text rather than the corresponding key is indicated. I deleted and recreated the group with the same result. It's a question that everybody knows?
I am working in Flex Builder 3.
Thank you.
Glad I could help. I ran into an issue just as much time, so thought it was something like that.
If you don't mind, can mark you this thread as a response? Thank you!
-
It's my computer specs:
Acer Aspire 4741G
Genuine Windows 7 with SP1 (full update)
Trend Micro Internet SecurityProblems:
Problem:
(1) on the (Fn + F3) bluetooth connection
(2) Bluetooth icon at the bottom right.
(3) right click on bluetooth icon.
(4) number, 'send a file' or 'receive a file' options.Problem 2:
(1) successfully connected to a Blackberry curve 8900
(2) I can send files to the handphone.
(3) when the handphone sends the files to the computer: this message appears:
(a) connecting...
(b) sending file...
(c) and then it stucks at 0%.
(4) I have the feeling that the blackberry is trying to send the file, detects the computer, but the computer is waiting for a user input to receive.
(5) maybe the problem is: nothing on the screen shows up to tell me to accept the file.Problem 3:
1) click on the start menu
(2) search for bluetooth. (Icon)
3) click the icon.
(4) nothing happens. O_OCan anyone help?
Thank you
Kind regards
Yong Tze Shoong
Hello
I suggest you follow the method and check if it helps.
Disable your anti-virus and check if that helps.
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
If the problem persists, try posting your question in forum Blackberry
http://supportforums.BlackBerry.com/T5/community-home/CT-p/comm_home
-
The computer will not send messages I type, but it receives messages correctly
Original title: programs network networking Internet site Internet Site Web Web Site URL of the network
the computer will not send messages I'm typing... but he recedives messages aok...
Hey Keithkohrs,
Usually, this means that outbound connections to the server are not properly Setup. Try contacting your email provider to ensure that your server settings are all correct. We can try to help you get the server settings appropriate if you let us know who provides your email address and what program you use as an email client.
Hope that helps.
-
try to photograph a sunset through the tree branches, but the camera will not focus correctly
I have a SX50HS, I'm trying to take a zoom of the sunset through trees, but the camera will be only focus on the branches... trying to get the Sun in short
I agree with the manual focus to infinity. I think that you will have little problem get enough light in the camera for a fast shutter if you are shooting and counting of the Sun!
Something will have to be badly exposed, because the Sun is so bright, and the hidden tree side is not. If you meter the Sun get beautiful orange, the tree will be a dark figure. Adjust the exposure for the sky a little left or right of the Sun, not the sun itself for best results. I'm not used to the Powershot cameras, f/5 might work, but on a DSLR, you would probably like an opening narrower, like f/8 or f/11 or even higher.
This is probably the way to go rather than dosage for the tree and saw the sky blown completely out., but you can try both ways for fun.
Good luck!
-
My client wants ot edit photos and text on its Web site. the site will not be hosted by BusinessCatalyst. Is it possible, and it is possible for me to synchronize the changes with my data?
Hello
Update June 2014 to Muse allows In-Browser editing for Muse sites hosted with third-party providers (not Adobe).
See https://helpx.adobe.com/muse/using/whats-new.html#In-browser%20Editing%20enhancements for more details.
Abhishek
-
Live Mail will not receive any emails with slideshows
Howdy
My new computer with windows 8 and Live Mail will not receive emails with slideshows or many photos attached.
While my old laptop with windows 7 Live Mail will receive these same emails.
Any ideas?
Larry has soon
I would ask uninstall you Windows live mail and then install it back and see if it helps to overcome the problem.
In addition, check this:
http://answers.Microsoft.com/en-us/w...b14b21f?auth=1 -
After the upgrade to OS 10.11.2, Mac Mini is so slow that it can take an hour to operate and the printer will not scan.
When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.
These must be run as administrator. If you have only one user account, you are the administrator.
Run the Console application in one of the following ways:
☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).
☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be all Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ all Messages
in the list of logs on the left. If you don't see this list, select
List of newspapers seen ▹ display
in the menu at the top of the screen bar.
Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.
Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.
Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.
The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.
Please don't dump blindly thousands of lines in the journal in this discussion.
Please do not post screenshots of log messages - text poster.
Some private information, such as your name, may appear in the log. Anonymize before posting.
When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.
If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.
-
I downloaded activex flash player but the game will not download it what should I do?
Why the game will not download? Help, please
Hi Peggy Gallihugh.
(a) what game you're talking about?(b) what browser do you use?(c) you get an error message during the download of the game?
The issue could be with the Web site of when you try to download the game.Just for test, try to download games from other legitimate Web sites.(d) what version of Flash player version you downloaded?If you use Internet Explorer as your browser, 10.0.45.2 version is ideal for Internet Explorer.Post back with your answers.
Aziz Nadeem - Microsoft Support -
Outlook express 6 will not receive any e-mail, send e-mail
Outlook express 6 will not receive any email from verizon but not email. Tired separate identify and clear and redo account?
An unknown error has occurred. Account: 'incoming.verizon.net', server: 'incoming.verizon.net', Protocol: POP3, Port: 110, secure (SSL): no, error number: 0x800C0133
Now it means everything. Error number: 0x800C0133 = a corrupt Inbox.
Move any message you want to save to a local folder that you create. Then, remove the problem of Inbox as follows.
Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder options | View.
With OE closed, find the box of Inbox.dbx and delete it. Another will be created automatically when you open OE.
General precautions for Outlook Express:
Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.
After you're done, followed by compacting your folders manually while working * off * and do it often.
Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.
Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the processors and causes a multitude of problems such as time-outs and account setting changes. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
http://www.oehelp.com/OETips.aspx#3Bruce Hagen
MS - MVP October 1, 2004 ~ September 30, 2010
Imperial Beach, CA -
Mail window will not receive ATT email error 0X800CCC90, 0X800CCC0F and 0X800420CD.
Original title: Mail window will not receive any emails ATT
After you have not used my Windows Mail to receive my emails on my Dell computer that uses Vista Ultimate for two weeks, now I am unable to receive emails from my ATT yahoo email account. Whenever I try to receive I get #14864 and 14865 with error 0X800CCC90, 0X800CCC0F and 0X800420CD messages. Will you please tell me how to solve this problem, so I can use my Windows Mail. I have no problem sending and my account is set to pop.att.yahoo.com.
Hello
Have you done any software or changes to the material on the computer before this problem?
You can check these links.
Solve problems with Windows Mail
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail
Refer to the steps from the link that resolves a similar problem.
For reference:
http://support.Microsoft.com/kb/942495
Check if it helps.
-
Try to burn a CD. The system will not recognize the blank disc or let me burn__
Try to burn a CD. The system will not recognize the blank disc or let me burn... says there is no disc inserted
Hello
Have you tried to close all programs and then insert the disc? Restart the 1st and then try it.
If no joy:
Please make all below even if you have done some before as it is often the set of operations which solves
the question.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.Hope these helps.
Rob - bicycle - Mark Twain said it is good.
-
I want to use Windows 7, the computer will not accept my 25 digit product code please help
I want to use Windows 7, the computer will not accept my 25 digit product code - please help.How to activate Windows 7 or Vista manually (activate by phone)
http://support.Microsoft.com/kb/950929/en-us1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone * do not select/press any option * and wait for a person to help you.
(6) explain your problem clearly to the support person.
(7) the person must give you a confirmation ID, copy it down on paper,
(8) check that the ID is correct in reading the support person.
(9) to enter the ID number, then click 'Next' to complete the activation process.Activation and registration of a Microsoft product
http://support.Microsoft.com/?kbid=326851
Windows activation: (888) 571-2048
(888) 725-1047 or 800-936-5700---------------------------- Alternatives -------------------------------------
To enable the use of the phone
1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
then by clicking on activate Windows now. ?2. click on show me other ways to activate.
3 type your Windows 7 product key, and then click Next.
4. click on use the automated telephone and then click Next.
If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.5. click on the location nearest you from the drop-down list, and then click Next.
6. call one of the available phone numbers listed. An automated system will guide you through the activation process.
7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.
8 Note the confirmation ID the phone system gives you.
9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.
10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.
How to contact a Microsoft Product Activation Center by phone
http://support.Microsoft.com/kb/950929Microsoft Activation centers worldwide telephone numbers:
http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
(This site is for activating Volume License, but if you call, they will help you)The phone number is not working:
Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspxRegister Windows 7
http://Windows.Microsoft.com/en-us/Windows7/help/register
Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
filled with tips, creative tips and other information to you help get the most out of Windows 7.
You also get a subscription to the monthly newsletter of Windows Explorer,
where you will find other tips and tricks, as well as special offers.Learn about Activation:
http://TechNet.Microsoft.com/en-us/library/ff793423.aspxJ W Stuart: http://www.pagestart.com
-
I have Win7/64. But I don't know, how I have my USB webcam to work. The cameras settle the program will not work. Please help me!
Thank you more:Steve Vidacs /HungaryOn Monday, November 5, 2012 20:14:15 + 0000, istvanvidacs wrote:
I have Win7/64. But I don't know, how I have my USB webcam to work. The cameras settle the program will not work. Please help me!
You must have installed a Windows 7 64-bit driver (if it exists)
for this. Do you have? Otherwise, navigate to the web site of the camera
manufacturer, search, download and install it.Ken Blake, Microsoft MVP
-
Tracing of the AMT will not turn on
I am getting error in the alert.log file following:
Fatal OR connect error 12170.
VERSION INFORMATION:
AMT for Solaris: 11.2.0.2.0 - Production Version
Oracle leaves NT Protocol adapter for Solaris: 11.2.0.2.0 - Production Version
Protocol TCP/IP NT to Solaris adapter: 11.2.0.2.0 - Production Version
Time: July 16, 2014 10:25:15
Tracing not lit.
AMT error struct:
NS main err in code: 12535
By oracle doc to activate the follow-up it is defined in sqlnet.ora:
DIAG_ADR_ENABLED = off # Disable ADR if the 11g version TRACE_LEVEL_SERVER = 16 # Activate the trace at level 16 TRACE_TIMESTAMP_SERVER = WE # The value timestamp in trace files TRACE_DIRECTORY_SERVER = / u05/oradata/PROD/trace / # control trace file location
#TRACE_DIRECTORY_SERVER = file location/u01/app/oracle/product/11202/network/trace # control trace
TRACE_FILELEN_SERVER = 20480 #Control size in kilobytes for example trace 20480
TRACE_FILENO_SERVER = 1 #Control number of trace by process files 1. don't you turn on track if only requested by oracle support to send the trace files?
2. Since DIAG_ADR_ENABLED is off, I will not receive db significant errors in the alert file more? IE: blocking, ora-600, drops TNS, etc.?
Can I activate it and continue tracking?
I am wanting to turn on tracing for more details on what's going on when I get this error TNS. But since I apply this change sqlnet.ora, I see no longer the TNS errors.
Thank you.
greddy09sc wrote:
The tns error reported in your alert log is probably transitory, and the fact that you don't see them is not necessarily bound by your changes in sqlnet.ora. In fact, I would say that they are absolutely not related. Sqlnet.ora reached what is written in the newspaper alert databases. These posts are written by the database. In sqlnet.ora configurations affect only what is written by the sqlnet layer itself.
I consider the sqlnet.ora doc you mentioned above before this post. They say that if:
If the DIAG_ADR_ENABLED parameter is set to OFF, and then follow-up to file non - ADR is used.
which means that it will turn off right? :
"infrastructure of diagnosability fault advanced to prevent, detect, diagnose and solve problems. The problems are errors critics such as those caused by bugs of database code, metadata corruption and customer data corruption. »
This is what confused me.
But the normal monitoring still occurs. And the difference between "normal" and followed by "ADR" is not in what is traced, but where trace files are written and if there is no extra packaging that goes with it. Tracing of ADR will add a file '.trm' and the file 'trc '.
The AMT error may be transient alert.log after a change in sqlnet.ora. You mention how they are absolutely not related. But I was getting 2-3 TNS error in the alert.log daily minimum. During the 4 days of this sqlnet.ora change I did not receive ANY TNS error.
There are certainly times that a tns error may appear in the alerts log. The database interacts with the network - especially when it acts as a client to a different database, via db link. If a network issue resulting occurs - as a result of the database - it will be reported back to the database, because the datbase was the process that requested services network. But the sqlnet.ora is a configuration file for the network, not the database.
I have since then, disable the tracing setting the file sqlnet.ora, including deleting DIAG_ADR_ENABLED = off. I immediately TNS error in my alert log within 12 hours.
I'll continue to monitor my TNS error now.
Thanks for your useful suggestion and comment Ed.
So to debug, we would need to know exactly what your database has tried to do when the error has been generated (since you say it is reported in the journal alerts) and we would need to know the exact contents and full of the sqlnet.ora in the ORACLE_HOME as well as the database reports the error When the error is thrown and when it isn't.
Maybe you are looking for
-
When I connect my camera to my PC (win 7) the photos tab is not available. Its not available as an option of folder on the device or a banner at the top. all of the software and the IOS are updated.
-
Hibernate and standby options does not not on Satellite P200D
Hi, I have a P200D with XP (he had originally Vista but I took the decision to use the reliable XP instead of Vista to baby)Anyone know how to enable hibernation options and the day before? They went gray and I really need these options.Thank you
-
Hello I have a question about CompactDAQ controllers. Is it possible to access it remotely through an internet connection? As is - this program start run after the power is on or the user must manually switch? Is it possible to Setup to do it automat
-
The function of scan from the HP Photosmart 7520 use a TWAIN-compatible driver
The function of scan from the HP Photosmart 7520 use a TWAIN-compatible driver
-
Printing problems 2 faces on HP Laserjet M1217nfwMFP of Mac OS 10.9 (Mavericks)
Hi, just a new MacBook Pro has bought and improved to 10.9 OS. Transfer all files of old machine (MacBook with OS 10.5.8), including software for printer HP Laserject M1217nfwMFP. I can print to this printer of the new machine, but cannot select "dou