html5_init.js creates different behaviors of DB on OS5 and OS6! Help!

Similar Questions

• Network of ESXi - different behavior when installing adapter

  Hi Experts,

  I came across a strange problem on the network adapters section:

  • I was installing the ESXi 5.5 in a standalone Machine (re-usable)
  • When installing, it showed me the error on non detected network cards and I checked the compatibility of the guide and found that it was not a supported network card.
  • Then I installed 'VMware Workstation 10' on the same machine on the host operating system
  • I have created a virtual machine and tried to install 'ESXi' inside the virtual machine [just for curiosity\
  • He installed perfactly without error / warning (s).

  My concern is 'how and why ESXi comes with two different behaviors between installation Metel naked Machine v/s install inside a virtual machine on the same physical host.

  Thanks for your response in advance and I apologize if I am not able to present the screenplay with clarity.

  -Kuldeep Singh

  Under vmware workstation, the virtualized esxi uses the virtual NIC (probably E1000) driver, which is supported.  The host operating system uses its own realtek driver.

  When you try to run ESXi on bare metal, it doesn't have a realtek driver, if it fails.

  It is a driver problem.

• Oracle Scheduler: create different planning daily times

  Hello

  Is it possible to create different schedule times based on the day?

  Example I schedule a backup job to run every day @ 23: 00

  So, I set up my work as:

  run dbms_scheduler.set_attribute (name = > 'DAILY_BACKUP_JOB', attribute = > 'repeat_interval', value = > ' FREQ = DAILY;) BYHOUR = 23; BYMINUTE = 00');

  But now I want to refine that it and I first work every Sunday @ 9 pm.

  is - it possible to set this is the same work? Or do I have to create 2 separate jobs for her? One for MON - sat @ 11 pm and another for Sun @ 9 pm?

  Kind regards

  Hello

  You can create 2 tables and assign them to your business:

  BEGIN
  -- week days
  dbms_scheduler.create_schedule('week_days_sched', repeat_interval => 'FREQ=DAILY;BYDAY=MON,TUE,WED,THU,FRI,SAT;BYHOUR=23');   
  
  -- sunday
  dbms_scheduler.create_schedule('sunday_sched', repeat_interval => 'FREQ=DAILY;BYDAY=SUN;BYHOUR=21');
  END;
  /
  

  Now specify these 2 schedules for your business:

  BEGIN
  dbms_scheduler.set_attribute( name => 'YOUR_JOB', attribute => 'repeat_interval', value => 'week_days_sched,sunday_sched');
  END;
  /
  

• Different behavior on the eyes; layer names are correct?

  Different behavior on the eyes; scales up and down, left right behaves as expected. All layer names are correct in artificial intelligence. Where to find a solution?

  Hmm, the sent JPG seems to be broken.

  But here's a place to look: in the Panel of the puppet, with no layers selected, you should see the behavior of face in the properties panel. Twirl in the group "Handles" to see what parts of the face it found. It shows the layers that you expect to find? (ToolTips will tell you what he's looking for.) Twirl down replacements also to see the layers of flashing. Note that if it does not find a layer of Blink for a certain look, it dimensionnera the eye that you close the eye rather than go to the work of replacement blink.

• How can I create different formats associated with DPS 2015?

  I drove to the top of the iPhone version, and now I need to resize to the tablet. My question is, how do I do this in the DPS Portal? I don't see in the documents given to adobe.

  A few questions:

  Your project 1 top-level collection or collections of higher level 2? Select "Collections" in the left rail and then search for either a collection called "default" or two collections called "phone by default" and "default tablet." If you have just a collection of 'default', this means that all of your content will appear on phones and tablets. If you have "phone by default" and 'default tablet', you must specify the contents of the collection of the tablet. This is determined by a project setting that you specify when creating the project. For the moment, you cannot change this setting.

  You want to include a different content for tablets and phones, or you want to use the same content in two? As a general rule, the HTML items work well on phones and tablets, but for fixed layout (at base of InDesign) items, you may consider creating separate articles for phones and tablets.

  Next week release includes a new system that we call "renditions available." When you define a layout template, you will be able to create different layouts page (or "renditions") for tablets, phones and the web. For any collection that appears in phones and tablets, you will be able to design layouts to browse different for the target device.

• How to create different layouts for (Tablet) portrait and landscape?

  Hello.

  I'm working on the version of the tablet of a Web site and I would like to create different layouts; a version for landscape view; Another view of the portrait. They would switch when the person who consults the site turns their camera. I mention this because I wonder if the Web site should be refreshed manually to reorient themselves?

  Thank you.

  M

  Hello

  I'm afraid, it is not possible to create a different presentation for both portrait and landscape site in Muse.

  However, you can get a preview what it will look like in portrait and landscape view.

  See the post: http://forums.adobe.com/message/5104181#5104181

  Kind regards

  Sachin

• Assignment of the different behaviors for instances of a symbol

  Hello everyone, I want to assign a different behavior (action script) to different instances of (a) symbol, what should I do? Thank you very much. Sincerely Mohsena

  give everyone a different instance name and assign different behaviors for each.

• Can I create different consistency nodes in the same cluster with defferent?

  Can I create consistency different nodes in the same cluster with defferent cache - config.xml file?
  A cache can be distributed in these nodes of deffirent?

  Yes. You can create different consistency nodes in the same cluster with cache files - config.xml defferent as long as you use the same file tangosol - coherence.xml and the same file tangosol-coherence - override.xml. But you can't store the data in the cache in the various nodes (created with different cache-config file). In other words, a node only to create their own Hide modes that are launched with the same cache file - config.Xml.

  See the following demo:
  I start a cache using the cache config examples-cache file server - server.xml. Then I start a console cache storage-disabled people (client cache) by using the config file coherence-cache cache - config.Xml. Two of them using the same file tangosol - coherence.xml and the same file tangosol-coherence - override.xml.
  The cache server uses a cache service PartitionedPofCache. But the client side using the Distributedcache service. The cluster address is same 224.3.5.2.
  The name of the cluster is also samme. They know.

  D:\coherence\lib>D:\examples\java\bin\run-cache-server.cmd

  D:\coherence\lib>D:\examples\java\bin\run-cache-server.cmd
  The system cannot find the file D:\coherence.
  The system cannot find the file C:\Oracle\Middleware\jdk160_11.
  2009-12-22 12:09:31.400/4.987 Oracle Coherence 3.5.2/463  (thread=main, member=n/a): Loaded operational configurat
  ion from resource "jar:file:/D:/coherence/lib/coherence.jar!/tangosol-coherence.xml"
  2009-12-22 12:09:31.450/5.037 Oracle Coherence 3.5.2/463  (thread=main, member=n/a): Loaded operational overrides
  from resource "jar:file:/D:/coherence/lib/coherence.jar!/tangosol-coherence-override-dev.xml"
  2009-12-22 12:09:31.470/5.057 Oracle Coherence 3.5.2/463  (thread=main, member=n/a): Optional configuration override
   "/tangosol-coherence-override.xml" is not specified
  2009-12-22 12:09:31.540/5.127 Oracle Coherence 3.5.2/463  (thread=main, member=n/a): Optional configuration override
   "/custom-mbeans.xml" is not specified
  
  Oracle Coherence Version 3.5.2/463
   Grid Edition: Development mode
  Copyright (c) 2000, 2009, Oracle and/or its affiliates. All rights reserved.
  
  2009-12-22 12:09:33.864/7.451 Oracle Coherence GE 3.5.2/463  (thread=main, member=n/a): Loaded cache configuration
   from "file:/D:/examples/java/resource/config/examples-cache-config.xml"
  2009-12-22 12:09:39.983/13.570 Oracle Coherence GE 3.5.2/463  (thread=Cluster, member=n/a): Service Cluster joined t
  he cluster with senior service member n/a
  2009-12-22 12:09:43.187/16.774 Oracle Coherence GE 3.5.2/463  (thread=Cluster, member=n/a): Created a new cluster
  "cluster:0xD3FB" with Member(Id=1, Timestamp=2009-12-22 12:09:38.06, Address=192.168.8.80:8088, MachineId=24656, Locatio
  n=process:144, Role=CoherenceServer, Edition=Grid Edition, Mode=Development, CpuCount=1, SocketCount=1) UID=0xC0A8085000
  000125B75D888C60501F98
  2009-12-22 12:09:43.508/17.095 Oracle Coherence GE 3.5.2/463  (thread=Invocation:Management, member=1): Service Mana
  gement joined the cluster with senior service member 1
  2009-12-22 12:09:46.582/20.169 Oracle Coherence GE 3.5.2/463  (thread=DistributedCache:PartitionedPofCache, member=1
  ): Service PartitionedPofCache joined the cluster with senior service member 1
  2009-12-22 12:09:46.672/20.259 Oracle Coherence GE 3.5.2/463  (thread=DistributedCache:PartitionedPofCache, member
  =1): Loading POF configuration from resource "file:/D:/examples/java/resource/config/examples-pof-config.xml"
  2009-12-22 12:09:46.702/20.289 Oracle Coherence GE 3.5.2/463  (thread=DistributedCache:PartitionedPofCache, member
  =1): Loading POF configuration from resource "jar:file:/D:/coherence/lib/coherence.jar!/coherence-pof-config.xml"
  2009-12-22 12:09:47.734/21.321 Oracle Coherence GE 3.5.2/463  (thread=main, member=1): Started DefaultCacheServer.
  ..
  
  SafeCluster: Name=cluster:0xD3FB
  
  Group{Address=224.3.5.2, Port=35463, TTL=4}
  
  MasterMemberSet
    (
    ThisMember=Member(Id=1, Timestamp=2009-12-22 12:09:38.06, Address=192.168.8.80:8088, MachineId=24656, Location=process
  :144, Role=CoherenceServer)
    OldestMember=Member(Id=1, Timestamp=2009-12-22 12:09:38.06, Address=192.168.8.80:8088, MachineId=24656, Location=proce
  ss:144, Role=CoherenceServer)
    ActualMemberSet=MemberSet(Size=1, BitSetCount=2
      Member(Id=1, Timestamp=2009-12-22 12:09:38.06, Address=192.168.8.80:8088, MachineId=24656, Location=process:144, Rol
  e=CoherenceServer)
      )
    RecycleMillis=120000
    RecycleSet=MemberSet(Size=0, BitSetCount=0
      )
    )
  
  Services
    (
    TcpRing{TcpSocketAccepter{State=STATE_OPEN, ServerSocket=192.168.8.80:8088}, Connections=[]}
    ClusterService{Name=Cluster, State=(SERVICE_STARTED, STATE_JOINED), Id=0, Version=3.5, OldestMemberId=1}
    InvocationService{Name=Management, State=(SERVICE_STARTED), Id=1, Version=3.1, OldestMemberId=1}
    DistributedCache{Name=PartitionedPofCache, State=(SERVICE_STARTED), LocalStorage=enabled, PartitionCount=257, BackupCo
  unt=1, AssignedPartitions=257, BackupPartitions=0}
    )
  
  2009-12-22 12:12:29.737/183.324 Oracle Coherence GE 3.5.2/463  (thread=Cluster, member=1): Member(Id=2, Timestamp=20
  09-12-22 12:12:29.541, Address=192.168.8.80:8089, MachineId=24656, Location=process:1188, Role=CoherenceConsole) joined
  Cluster with senior member 1
  2009-12-22 12:12:30.498/184.085 Oracle Coherence GE 3.5.2/463  (thread=Cluster, member=1): Member 2 joined Service M
  anagement with senior member 1
  2009-12-22 12:12:31.860/185.447 Oracle Coherence GE 3.5.2/463  (thread=Cluster, member=1): TcpRing: connecting to me
  mber 2 using TcpSocket{State=STATE_OPEN, Socket=Socket[addr=/192.168.8.80,port=8089,localport=2463]}
  2009-12-22 12:12:51.338/204.925 Oracle Coherence GE 3.5.2/463  (thread=Cluster, member=1): Member 2 joined Service D
  istributedCache with senior member 2
  

  The following command starts a cache client.
  D:\coherence\bin>coherence.cmd

  D:\coherence\bin>coherence.cmd
  ** Starting storage disabled console **
  java version "1.6.0_11"
  Java(TM) SE Runtime Environment (build 1.6.0_11-b03)
  Java HotSpot(TM) Server VM (build 11.0-b16, mixed mode)
  
  2009-12-22 12:12:21.054/3.425 Oracle Coherence 3.5.2/463  (thread=main, member=n/a): Loaded operational configurat
  ion from resource "jar:file:/D:/coherence/lib/coherence.jar!/tangosol-coherence.xml"
  2009-12-22 12:12:21.355/3.726 Oracle Coherence 3.5.2/463  (thread=main, member=n/a): Loaded operational overrides
  from resource "jar:file:/D:/coherence/lib/coherence.jar!/tangosol-coherence-override-dev.xml"
  2009-12-22 12:12:21.365/3.736 Oracle Coherence 3.5.2/463  (thread=main, member=n/a): Optional configuration override
   "/tangosol-coherence-override.xml" is not specified
  2009-12-22 12:12:21.415/3.786 Oracle Coherence 3.5.2/463  (thread=main, member=n/a): Optional configuration override
   "/custom-mbeans.xml" is not specified
  
  Oracle Coherence Version 3.5.2/463
   Grid Edition: Development mode
  Copyright (c) 2000, 2009, Oracle and/or its affiliates. All rights reserved.
  
  2009-12-22 12:12:29.316/11.687 Oracle Coherence GE 3.5.2/463  (thread=Cluster, member=n/a): Service Cluster joined t
  he cluster with senior service member n/a
  2009-12-22 12:12:29.356/11.727 Oracle Coherence GE 3.5.2/463  (thread=Cluster, member=n/a): Failed to satisfy the
  variance: allowed=16, actual=20
  2009-12-22 12:12:29.356/11.727 Oracle Coherence GE 3.5.2/463  (thread=Cluster, member=n/a): Increasing allowable v
  ariance to 17
  2009-12-22 12:12:29.807/12.178 Oracle Coherence GE 3.5.2/463  (thread=Cluster, member=n/a): This Member(Id=2, Time
  stamp=2009-12-22 12:12:29.541, Address=192.168.8.80:8089, MachineId=24656, Location=process:1188, Role=CoherenceConsole,
   Edition=Grid Edition, Mode=Development, CpuCount=1, SocketCount=1) joined cluster "cluster:0xD3FB" with senior Member(I
  d=1, Timestamp=2009-12-22 12:09:38.06, Address=192.168.8.80:8088, MachineId=24656, Location=process:144, Role=CoherenceS
  erver, Edition=Grid Edition, Mode=Development, CpuCount=1, SocketCount=1)
  2009-12-22 12:12:29.977/12.348 Oracle Coherence GE 3.5.2/463  (thread=Cluster, member=n/a): Member 1 joined Service
  Management with senior member 1
  2009-12-22 12:12:29.977/12.348 Oracle Coherence GE 3.5.2/463  (thread=Cluster, member=n/a): Member 1 joined Service
  PartitionedPofCache with senior member 1
  2009-12-22 12:12:30.578/12.949 Oracle Coherence GE 3.5.2/463  (thread=Invocation:Management, member=2): Service Mana
  gement joined the cluster with senior service member 1
  SafeCluster: Name=cluster:0xD3FB
  
  Group{Address=224.3.5.2, Port=35463, TTL=4}
  
  MasterMemberSet
    (
    ThisMember=Member(Id=2, Timestamp=2009-12-22 12:12:29.541, Address=192.168.8.80:8089, MachineId=24656, Location=proces
  s:1188, Role=CoherenceConsole)
    OldestMember=Member(Id=1, Timestamp=2009-12-22 12:09:38.06, Address=192.168.8.80:8088, MachineId=24656, Location=proce
  ss:144, Role=CoherenceServer)
    ActualMemberSet=MemberSet(Size=2, BitSetCount=2
      Member(Id=1, Timestamp=2009-12-22 12:09:38.06, Address=192.168.8.80:8088, MachineId=24656, Location=process:144, Rol
  e=CoherenceServer)
      Member(Id=2, Timestamp=2009-12-22 12:12:29.541, Address=192.168.8.80:8089, MachineId=24656, Location=process:1188, R
  ole=CoherenceConsole)
      )
    RecycleMillis=120000
    RecycleSet=MemberSet(Size=0, BitSetCount=0
      )
    )
  
  Services
    (
    TcpRing{TcpSocketAccepter{State=STATE_OPEN, ServerSocket=192.168.8.80:8089}, Connections=[]}
    ClusterService{Name=Cluster, State=(SERVICE_STARTED, STATE_JOINED), Id=0, Version=3.5, OldestMemberId=1}
    InvocationService{Name=Management, State=(SERVICE_STARTED), Id=1, Version=3.1, OldestMemberId=1}
    )
  
  Map (?):
  
  2009-12-22 12:12:49.505/31.906 Oracle Coherence GE 3.5.2/463  (thread=main, member=2): Loaded cache configuration
  from "jar:file:/D:/coherence/lib/coherence.jar!/coherence-cache-config.xml"
  2009-12-22 12:12:51.358/33.729 Oracle Coherence GE 3.5.2/463  (thread=DistributedCache, member=2): Service Distribut
  edCache joined the cluster with senior service member 2
  
    
    example-distributed
    DistributedCache
    
      
        example-binary-backing-map
      
    
    true
  
  

  But when I try to store data cached from the client side, it reports the error message: it is staorage-disabled people. It shows that this console cache cannot store data in the server cache existing since then using different cache config files.

  Map (ca3): cache ca2
  
    
    example-distributed
    DistributedCache
    
      
        example-binary-backing-map
      
    
    true
  
  
  Map (ca2): put 1 one
  2009-12-22 14:00:04.999/6467.370 Oracle Coherence GE 3.5.2/463  (thread=main, member=2):
  java.lang.RuntimeException: Storage is not configured
          at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.onMissing
  Storage(DistributedCache.CDB:9)
          at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.ensureReq
  uestTarget(DistributedCache.CDB:34)
          at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.put(Distr
  ibutedCache.CDB:22)
          at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.put(Distr
  ibutedCache.CDB:1)
          at com.tangosol.util.ConverterCollections$ConverterMap.put(ConverterCollections.java:1541)
          at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ViewMap.put(Distrib
  utedCache.CDB:1)
          at com.tangosol.coherence.component.util.SafeNamedCache.put(SafeNamedCache.CDB:1)
          at com.tangosol.coherence.component.application.console.Coherence.processCommand(Coherence.CDB:581)
          at com.tangosol.coherence.component.application.console.Coherence.run(Coherence.CDB:39)
          at com.tangosol.coherence.component.application.console.Coherence.main(Coherence.CDB:3)
          at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
          at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
          at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
          at java.lang.reflect.Method.invoke(Method.java:597)
          at com.tangosol.net.CacheFactory.main(CacheFactory.java:1400)
  

• Inconsistent behavior of focusLost with JTable and JTree

  Swing has known problems for a long time with the cells and the loss of the thematic demonstrations in the JTables. Generally, users expect loss of focus to commit their changes rather than cancel the change. Then edit controls (for example, JTextFields) located in CellEditors should generally be listeners of update and manage focusLost() by calling cellEditor.stopCellEditing (). It is very clear.
  
  JTables to have an additional, special problem associated with a generation (or not) of focus events when moving from one cell to another cell in the same table. To do this, the code that creates the JTable needs to call table.putClientProperty ("terminateEditOnFocusLost", Boolean.TRUE). Setting this property to 'magic' on the table allows expected behaviors Assembly when moving from cell to cell.
  
  These issues are well described here: http://tips4java.wordpress.com/2008/12/12/table-stop-editing/
  
  I've set up the property of the client and the listener to focus, and they perform as expected in most cases. But I seems to have discovered a third case that is not managed by one of these two known workarounds.
  
  We have a design of the user interface master/detail where the master is a tree control and retail is the JTable of editable cells. The (master) JTree and JTable (detail) are each cashed in the JPanels which are in turn greeted in an enclosing JPanel.
  
  If I am editing within a cell and click completely outside this hierarchy - for example, in the menus of the main application bar - the focusLost() is managed and the change is committed, as you wish. And if I click anywhere in the JTable, also commits the change.
  
  But if I'm editing a cell and choose the JTree specifically, the change is aborted.
  
  I added logging for focusLost() Manager. I found that in the majority of cases, for example when clicking on menus or other completely different control bar, table.isEditing () returns TRUE for the JTable both focusLost() Manager is running. Because the change is running, the Manager is capable of broadcasting of stopCellEditing() and validate the user change.
  
  But when I click on the outside for the JTree specifically, then in focusLost() Manager I find isEditing() is WRONG - that is, the change has already been cancelled and there is no way to recover already cancelled user input. The text field focusLost Manager pointed out that 'the opposite element' (wins the focus) is a JTree control as expected.
  
  So it seems that something either the JTree or the locking hierarchy Panel made a subtle change to the behavior of the focusLost(). And therefore bypasses of modification of standard tables do not fully work in our application. And unfortunately, clicking on cells change directly in the tree turns out to be a common case in our design of the user interface. Failing to validate the edition in this case with bad consequences that should be fixed.
  
  Any suggestion would be appreciated. Note: the question is similar to related to this issue:
  
  JTree does not call focusLost on headphone
  
  but the tail wire. I concede that I'm not provide code either and he can't promise right now.
  - - -
  Jeff

  Rainmaker says:
  Right now seems to be a lot to a precise definition of the terms so I ask this question with regard to the docs.

  good start :-)

  >

  You wrote:

  invokesStopCellEditing and terminateEditOnFocusLost set up different behaviors, without overlap.

  Yes, I did, it meant and still means he

  >

  The setInvokesStopCellEditing() docs say:

  + Determines what happens when the edition is interrupted by selecting another node in the tree, a change of data of the tree, or by other means. Setting this property a value of true causes changes to be automatically saved when editing is stopped. +

  Well, your fat is your old problem: assumptions yet ;-) My focus is

  + Determines what happens when the change is interrupted by selecting another node in the tree, a change of data of the tree, or by some other means.

  And which is supported by reading on:

  
       * @param newValue true means that stopCellEditing is invoked
       *        when editing is interrupted, and data is saved; false means that
       *        cancelCellEditing is invoked, and changes are lost
  

  in the total sense: he's interrupted (whatever that means, no conclusive specification except this model or the selection change), this propterty determines whether editing is stopped or cancelled. Conversely: if it is not interrupted, the property has no effect.

  Do you mean that the part of the sentence by other means does not include loses focus? I have to disagree. Of course loses focus is a "way" to interrupt the editing.

  Nothing to accept or not: is done, it's the 'interrupt' that matters. Obviously (although without doubt) lose focus don't consider an interruption - nothing happens when moving the cursor somewhere else, neither commit nor cancel.

  So if invokesStopCellEditing is defined, and the tree loses focus, it should save your work. And that's why the invokesStopCellEditing overlap with terminateEditOnFocusLost.

  just to drive home ;-) - the item no.

  >

  Note that I stick to the definition in the docs.

  No, you interpret the doc to fit your expectations.

  I did an example code and checked the validation works when the tree loses focus.

  You should have (it's a two-liner to add to your example) - see the divergence of expectations and reality, rethink your accession ;-)

  In which case it's bugged, because the docs say it should.

  In fact, I don't think it is (as you may have guessed so read up to here ) the text doc of course is not as easy as it could be, as is unfortunately a habit running in the swing. Assuming that means it that you wait that means is a trap. My general advice is to read the documentation of the api carefully and until its end and then check against the actual behavior expectations. The advice to take it or leave it - your choice, of course.

  CU
  Jeanette

• Strange behavior. 2590 relay switch and Get position vi.

  I'm reading a PXI2590 1 x 4 MUX switch relays that I fires only when necessary. I know the names of the relays are MUX01, MUX23 and MUX0123. If I switch, niConnect channels INIT, wait Debounce and can get the Position of the relay, I get a correct reading (closed or open). I then called niSwitch close .vi and the switch remains in this position.

  However if I just called INIT, niSwitch getting the Position of relay and close vi seems the selector to a different value (default?). I confirmed this behavior using a HF generator and Analyzer of spec.

  Is what I do with these evil vi? Can I use DAQmx driver for this switch instead?

  LabVIEW 8.5.1

  OR-Switch 3.70.49152

  NOR-DAQmx 8.7.1f2

  NOR-PXI-2590

  Hello GovBob,

  Correct me if I'm wrong.  First you call OR-SWITCH boot (not initialize with topology) or initialize options with the 'reset device' Boolean is unwired? (which means reset = true)

  Then, in a case: call OR-SWITCH connect channels, wait OR-SWITCH Debounce, OR-SWITCH get relay post, then NOR-SWITCH close (close a session, not close relay).  Then physically measure opens or shorts.

  In the other case: appeal OR-SWITCH get relay post, then NOR-SWITCH close.  Then physically measure opens or shorts.

  The results are the second case has openings (ch0 is connected to the com).  This is expected behavior since the indicator 'reset the device' in one of the screws initialize is TRUE if left thread continues.  However, if you physically measure different values compared to what OR-SWITCH get post is back, so please submit your screws and a list of the steps and the values measured for each stage.  I hope this helps!

  -Jordan

• EqualLogic GroupManager displays a different number of replicas, 2 outgoing and incoming 1.

  GroupManager displays a different number of replicas, 2 outgoing and incoming 1.  Is this a normal behavior?

  

  I raise this question to technical assistance from Dell.  They checked with their lab environment and confirmed the same behavior.  There is no functional cause whose status is displayed like this.  Two points, they said:

  (1) the number of the line leaving includes the history of replication.   It will show you an extra line in addition to the number configured in the replica set. (in my case, it's 1 (configured) + 1 (extra), so 2 total)

  (2) the number of the replica by entering the real number of replica set used for the function of data redundancy.

• A snapshot could not be created. Check the event logs "VSS" and "SPP" application for more information

  Original title: a snapshot could not be created. Check the event logs "VSS" and "SPP" application for more information. Details: shadow enough storage to create the copy storage file or other shadow copy data. Error code: 0 x 81000019

  I tried to back up my files using an external hard drive (which I have done before with Windows 7 64-bit), but recently I get the same error code. I have re-formatted external hard drive, run diagnostics on it, restarted the computer, etc and nothing seems to work. I also tried both options posted in another forum with the same error and too, they were not successful (external is already NTFS and now that it has been re-formatted is completely empty). Windows has more suggests? I hope not to have to use drag and drop my files whenever I want to save my computer.

  Thanks for the help!

  Read this article because I believe that the amount of free space in the 100 MB partition is too small. Article is a different error code, but the technique to increase the size of the 100 MB partition is the same.

  Note: Backup of your hard drive as described in the article.

  How to fix error code: 0 x 81000033
  http://www.PAGESTART.com/win7br0x8100003301.html

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Hello guys, I would like to create a product for a website builder. Any help?

  I am a creator of display for oral care products, and I would like to create a product configurator, so that my clients can customize the model they want, and see how the model looks like with a reactive "modeling."

  So basically it should have different options:

  1. Choose the number of brushes they want on the view (1-9)
  2. Choose the model of brushes they want (12 different available)
  3. Choose the 'extra' part they want (small screen lcd, Panel information or refills showcase)
  4. Choose the position they want for each option (eg. 2 brushes (left) + screen lcd (just after the 2 brushes) + 1 brushes (at the end)

  To give you an idea here is a fast modeling that I did:

  

  The real problem I have is that I don't want to have to create all the possible arrangements

  1 and 2 the best way is to have all the variations in a database and query the database for the corresponding products.

  Then have drop-down lists so that a choice can be made

• I have created a PDF file using Adobe DC and I need to share this amongst many pepole. They need to install adobe DC on their pc

  I have created a PDF file using Adobe DC and I need to share this amongst many pepole. Do need to install adobe DC in their pc.

  It depends on.

  1. most people with reasonably new equipment can read PDF files in any case using things that are built in. This includes

  -Windows 8 and later versions

  -Mac OS (all users)

  -iOS (iPhone, iPad)

  -Android (phones and tablets)

  2. many people Windows have a web browser that can read PDF files anyway. This includes

  -Chrome

  -FireFox

  3. This means there are many different types of software that can read PDF files. If you do a simple PDF, you should be fine. If you make shapes or portfolios or media, your end users must install Acrobat Reader, even if they otherwise can read a PDF file.

• Need info regarding the behavior of Oracle UCM accounts and security groups

  Need information about the behavior of Oracle UCM accounts and security groups.
  
  Oracle UCM version: 11.1.1.5.0
  
  Steps to follow:
  1. log in with the user "weblogic" and content created with the id of "content1".
  2. apply the "@acc1 (R)" and "TestGroup1" to her quote created in step 1
  3. close the session
  4. connect as that of "acc1user1", the user is not able to see the "content1".
  5. close the session
  6 log in as "role1user1", the user is not able to see the "content1".
  
  Account information and group:
  1. the user "acc1user1" is part of the "@acc1 (R).
  2. the user "role1user1" belongs to 'role1 (R)' and is mapped to "TestGroup1" at the Complutense University of MADRID
  
  Expected:
  The 'acc1user1' and 'role1user1' should be able to see "content1" because they have at least the read permission.
  
  Please help me understand why users aren't able to see the content.

  See section 5.5.1.1 in the Manual: http://docs.oracle.com/cd/E23943_01/doc.1111/e10792/c05_security.htm#BGBGIJDJ

  If the accounts and roles are used, the result is an intersection, not a Union.