Inconsistent behavior of focusLost with JTable and JTree

Similar Questions

• Strange behavior of CSS with IE9 and JDeveloper 11.1.1.6.0?

  I work with 11.1.1.6.0 JDeveloper and ADF. There is a single file CSS skinning, which is a bit more of 7800 lines. All is well in Chrome, Firefox, IE7, IE8 and IE10. However, when you run the application in IE9 aren't certain styles get applied.

  I noticed that the elements that were not make style were lowest in the CSS file (around 7500 line). I cut and pasted the styles in the CSS file, refreshed, and that items that were not before style now received their styles (I could inspect the page and see that the CSS is not load at all - not a problem with the CSS selectors is not not in the rendered HTML).

  I first thought, it may be a thing of file size, but after reading this post, I'm not sure. In addition, which does not explain why I have the problem of IE9.

  Has anyone having problems with IE9? It seems very strange to me that this would be a browser problem. My first thought was that it was an error or invalid CSS used, but I started with a line of CSS and moved it further down in the order until he has stopped working (I changed the background of the header to rose). There was a single line of CSS, where the background is pink when applied on line directly in front, but when you apply directly after that the background was gray again. I've scoured the CSS but saw nothing wrong with it (see below). I removed the CSS in question and the background of the header still showed once pink. She drops by a few lines, and he ceased to be picked by IE9. Following this process, but has not been able to find a solution.

  Here's the CSS in question in case something happens to stand out to someone else (I thought "domready" was perhaps a reserved word or something):

  table.plan - Jack td.cereal - box af | panelGroupLayout.cereal - box-retail af | panelGroupLayout.plan - cost-domready,.

  table. Cereal-box td.cereal - box-retail af | panelGroupLayout.cereal - box-retail-wrap af | panelGroupLayout.plan - cost-domready {}

  position: absolute;

  left: 5px;

  right: 8px;

  bottom: 5px;

  }

  IE 6 to 9 have CSS size limits, can be even more pronounced in IE 9.

  IE 10 has raised limits.

  http://blogs.msdn.com/b/ieinternals/archive/2011/05/14/10164546.aspx

  http://support.Microsoft.com/kb/262161

• The police inconsistent behavior between reflow and chrome

  After seeing the previous discussions regarding the behavior of the incompatible police caused by the text copied and pasted, containing hidden styling tags, I tried to find a way of stripping quickly on the tags.

  Customer copied text from word.

  Used special paste - text only - to place the text in Design view of Dreamweaver CC. Mode code entered and removed tags invisible. Mode code text copied and pasted into edge of reflow.

  Text in the reflow style - paragraph breaks, shift back and emboldened the topics. Saved and previewed in Chrome - still does not show "BOLD" headings (arial).

  Thus, text deleted box to reflow and repaints. Dreamweaver and copied text of the code with < p > and < br > tags as needed.

  Back to reflow and pasted into the text box. Black screen immediately and no way to do anything. Had to force quit and then restart reflow saved the project file.

  Same thing happens to repeat.

  What can I do to get the typography of reflow to preview correctly in chrome? Really frustrated by this problem.

  Thank you very much in advance for your suggestions...

  Thanks a lot for this bug. I can reproduce it on my end. I deposited it take a look at our team.

  I'll try and update if we find a solution.

• Scripting VI: inconsistent behavior of terms [] of a wire / owner

  Suppose I have the following vi:

  

  I am looking for the wire and acquire the terminals of this thread.

  The result I get is twice a terminal and once a terminal control (for indicator).

  Like this:

  

  So, the typical process to get the wire to the node is using the function of owner.

  It works with ordinary terminals, you get just the node-prefer (as a general-reference) - according to this:

  http://zone.NI.com/reference/en-XX/help/371361K-01/lvhowto/scripting_nav_wire_to_node/

  However, for the ControlTerminal, you get the diagram/TopLevelDiagram or anything that will place you put in this indicator.

  I consider this inconsistent behavior (even if it is easy to get around... it's a simple case-structure).

  What is the logic behind this?

  In fact, what exactly is the difference between a ControlTerminal and control? Has it something to do with the fact that I must always catalogued my knots when I browse a tree like this?

  

  Elements that inherit from the class of 'Control' are objects of façade. The 'ControlTerminal' class represents the terminals for these controls on the diagram.

  The extent of why end-nodes is the property of nodes and ControlTerminals are the property of diagrams, it's just the way it is.

• iOS 10 Mail: moving Messages, inconsistent behavior when you tapoterez folder icon

  iPhone 6, iOS 10

  I see inconsistent behavior when I try to move a message in Mail from in the message.

  In previous versions of iOS, during playback of an e-mail message, I could tap the icon of the folder at the bottom of the messages, and which would lead to the top of the hierarchy of the folders for the email of the message account. From there on, it was just a matter of tapping on the file I want to move the message to, and he settled there the message and look back to the Inbox display (or the folder view I moved this message of).

  In iOS 10, when I hit this folder icon, two things happen: it happens the same thing I described above, or sometimes, rather than see the hierarchy of folders, I see three buttons slide up from the bottom of the screen. The top button allows me to move the message directly to a folder in my account called 'Action' I created (I don't know why he chose this particular file to the default value for this button - maybe because it is first in alphabetical order of all my folders created by the user), the second button says "Another mailbox" and when it takes me to the hierarchy of the mailbox as described above, and the third button is a Cancel button.

  I can't understand what dictates which of those two things happening. I tried again and again on a bunch of different messages. Some do happen, some do the other thing happens, and sometimes I'll have a different behavior in the message even if I try again later.

  I prefer the old way. But I could get used to the new way, if I could at least choose what default folder appears in the first box.

  Anyone else seeing this?

  Someone knows how to change the default folder in the first box of this new process?

  Thank you!

  I seem to have solved the problem on my own. I went to settings > Mail, and in the "Threading" section, I have disabled "Complete Threads."

• I get a strange behavior of the bar tabs and the address bar in Firefox 29,0 for Mac.

  I just installed Firefox 29,0 for Mac.
  I have a strange behavior of the bar tabs and the address bar with this new version.
  Instead of the address bar, I get two rows of symbols. And it is impossible to write anything in the address bar.
  (I add a screenshot, but I can't find a way to do it).

  Firefox has an RSS icon in the palette of the toolbar that you can drag a toolbar (but not on the location bar container).

  • Firefox menu button > Options/Preferences > toolbars
  • View > toolbars > customize

• Bad behavior of cancellation with the additional block end no OnNewStep

  Hello

  I'm working on StepTypes requiring a block structure, as loops in TestStand (using TestStand 2012). I use OnNewStep lower level to insert the end block no during the boot block is instantiated.

  I do not manage to get a good behavior of cancellation with it as follows:

  • If I do not use SequenceFile.IncChangeCount in OnNewStep stage, when I select Cancel in the sequence editor, the only stage of boot block is removed, the end block remains. My understanding is the expected behavior: motor TestStand don't know that the no end block has been added, she has no reason to remove it.
    However, I prefer to remove both start and end block as follows, as do with While TestStand, DoWhil or for loops.
  
  
  • If I do a SequenceFile.IncChangeCount in the OnNewStep stage, when I select Cancel in the sequence editor, I get the following error, and nothing is deleted or cancelled the sequence:

    

  I guess TestStand increments the ChangeCount when I insert a step, and OnNewStep also increment the ChangeCount, while the operation should be considered as a single action.

  I found in the documentation of the UndoStackclass with the method AggregateTopUndoItems method, I suppose, may be the solution. But UndoStack seems to be available only from ApplicationMgr and SequenceFileViewMgr (which are not accessible from the context of the sequence).

  Any idea to get similar behavior at the correct stage of control of native stream, with cancellations?

  Best regards

  Well, I found a solution by looking at what is happening in CommonFlow.cpp (\National Instruments\TestStand 2012\Components\StepTypes\FlowControl).

  For your information, here is the code:

  Insert a corresponding END step after step again
  
  ' public static void OnNewStepWithEndStepFunction (SequenceContextPtr & sequenceContext)
  
  {
  
  	If (! sequenceContext-> sequence-> HasMismatchedBlocks)
  
  		return;
  
  PropertyObjectFilePtr	file = sequenceContext-> SequenceFile-> AsPropertyObjectFile();
  
  	StepPtr endStep sequenceContext-> engine =-> NewStep ("", gEndStepTypeName);
  
  	UndoItemCreatorPtr undoItemCreator sequenceContext-> engine =-> NewUndoItemCreator (EditKind_InsertStep, file, L"" ");
  undoItemCreator-> BeginEdit (endStep-> AsPropertyObject());
  
  	sequenceContext-> sequence-> InsertStep (endStep, sequenceContext-> StepIndex + 1, sequenceContext-> StepGroup);
  
  	undoItemCreator-> EndEdit();
  _variant_t	;
  
  	endStep-> name = (char *) sequenceContext-> engine-> GetResourceString ("FLOW_CONTROL_STEPS", "END_DEF_STEP_NAME", "", &found);)
  file-> IncChangeCount();
  to do this, or the step type will not be displayed immediately as being used by the file
  
  	file-> TypeUsageList-> AddUsedTypes (endStep-> AsPropertyObject());
  undoItemCreator-> CreateAndPostUndoItem (CreateUndoItemOption_NoOptions, TS::ApplicationSite_DefaultSite);
  
  }

  So the trick is to instantiate a UndoItemCreator that points to the current SequenceFIle, to call BeginEdit with, as an argument, the step to insert as PropertyObjetct, before calling the InsertStep method, then call the EndEdit method. Increment the file change, add the step as PropertyObject in the TypeUsedList file and finally call CreateAndPostUndoItem method.

  ... Happy!

• Strange behavior. 2590 relay switch and Get position vi.

  I'm reading a PXI2590 1 x 4 MUX switch relays that I fires only when necessary. I know the names of the relays are MUX01, MUX23 and MUX0123. If I switch, niConnect channels INIT, wait Debounce and can get the Position of the relay, I get a correct reading (closed or open). I then called niSwitch close .vi and the switch remains in this position.

  However if I just called INIT, niSwitch getting the Position of relay and close vi seems the selector to a different value (default?). I confirmed this behavior using a HF generator and Analyzer of spec.

  Is what I do with these evil vi? Can I use DAQmx driver for this switch instead?

  LabVIEW 8.5.1

  OR-Switch 3.70.49152

  NOR-DAQmx 8.7.1f2

  NOR-PXI-2590

  Hello GovBob,

  Correct me if I'm wrong.  First you call OR-SWITCH boot (not initialize with topology) or initialize options with the 'reset device' Boolean is unwired? (which means reset = true)

  Then, in a case: call OR-SWITCH connect channels, wait OR-SWITCH Debounce, OR-SWITCH get relay post, then NOR-SWITCH close (close a session, not close relay).  Then physically measure opens or shorts.

  In the other case: appeal OR-SWITCH get relay post, then NOR-SWITCH close.  Then physically measure opens or shorts.

  The results are the second case has openings (ch0 is connected to the com).  This is expected behavior since the indicator 'reset the device' in one of the screws initialize is TRUE if left thread continues.  However, if you physically measure different values compared to what OR-SWITCH get post is back, so please submit your screws and a list of the steps and the values measured for each stage.  I hope this helps!

  -Jordan

• My site shows and works fine in Chrome and Firefox. It is exactly the opposite with Safari and Internet Explorer.

  In safari, the site takes as much time to load and once loaded, the police of the web that I used is replaced by a defect in safari, I guess. My video background takes a longer time to load once the site is loading. In internet explore, my site simply doesn't show as expected. I have 5 guides to navigation on the right side of the site, but about 11 are displayed. The artist's statement is not displayed in the bio section. Here's the url... leecatarts.businesscatalyst.com

  Please, any suggestions would be great!

  I think that you have solved the problem I checked the site with Safari and IE, but was not able to display the same behavior as mentioned. The site works very well.

  Thank you

  Sanjit

• Need info regarding the behavior of Oracle UCM accounts and security groups

  Need information about the behavior of Oracle UCM accounts and security groups.
  
  Oracle UCM version: 11.1.1.5.0
  
  Steps to follow:
  1. log in with the user "weblogic" and content created with the id of "content1".
  2. apply the "@acc1 (R)" and "TestGroup1" to her quote created in step 1
  3. close the session
  4. connect as that of "acc1user1", the user is not able to see the "content1".
  5. close the session
  6 log in as "role1user1", the user is not able to see the "content1".
  
  Account information and group:
  1. the user "acc1user1" is part of the "@acc1 (R).
  2. the user "role1user1" belongs to 'role1 (R)' and is mapped to "TestGroup1" at the Complutense University of MADRID
  
  Expected:
  The 'acc1user1' and 'role1user1' should be able to see "content1" because they have at least the read permission.
  
  Please help me understand why users aren't able to see the content.

  See section 5.5.1.1 in the Manual: http://docs.oracle.com/cd/E23943_01/doc.1111/e10792/c05_security.htm#BGBGIJDJ

  If the accounts and roles are used, the result is an intersection, not a Union.

• curious problem with extrusion and rotation

  I found a curious problem with extrusion and turn into the CS6. It's not a bug, but it's a behavior that is less intuitive who is confused and sometimes painful. I think it is something that should go on the list of tasks for the devs. Someone else, right? Don't agree?

  Example:

  

  I started with a path arrow, to which I applied the effect "extrude". I then put an icon on top of the arrow and grouped in the icon and the arrow. Now, I use this icon arrow in several different parts of my design, in different orientations. I flip the arrow, the relative position of the icon and the arrow seems to pass. I believe that this is happening because when you rotate the arrow icon, Illustrator rotates both the icon and the arrow on the center of the underside of the arrow. This is because the upper side of the arrow is essentially fictitious, just an artifact of the effect of extrusion. So, even if the icon appears as if it is drawn on the upper side of the arrow, it behaves as if it is attached to the underside of the arrow. When you apply a transformation, this transformation impacts on the underside of the arrow, causing the top of offset from the icon.

  The solution would be to add an extra box to the effect of extrusion, asking if you wanted to extrusion (the way things are currently done) upwards or downwards. If you can extrude downwards, then the upper side of the arrow would be the 'real' face, those affected by the changes. You can then put a picture on the top, the arrow and the image of the group, and when you apply a transformation, the icon would remain fixed relative to the top, which would be consistent with your intuitive expectations.

  If anyone is curious to experiment with this particular example, I posted this file in Google Docs here:

  https://docs.Google.com/file/d/0B0Hoxcl5zTEtTXo5QnNsMGwwOGc/edit?USP=sharing

  It's about what you just mount the image with a transformative effect to match the extrusion.

  So basically, you apply a 3-d rotation effect to your image to match the rotation of your arrow, then you apply a transformation movement in the vertical axis to match the height of your extrusion.

  hope this helps

  https://docs.Google.com/file/d/0B4ilRoSBagc3d2w2Ylc2cWxFVjA/edit

  If you want to get real on this issue retro we only corresponding to the rotation of the arrow in the center of the extrusion, if we wanted to distort the image perfectly, the rotation should be slightly higher, but anyway, it is hardly noticeable.

• ScheduledThreadPoolExecutor with minimum and maximum thread

  Hi all
  
  I need to implement something that is planning a number of potentially important small tasks over time. I would use a pool of threads to do this in an effective manner. I wish to have a configuration, for example, 1-10 of discussions where the threads are created as needed and if the number of threads max is reached, tasks are queued. The tasks are timed and repeat if I prefer the automated programming of the executor. The deployment environment and the number of tasks to manage will vary so adaptation of configuration and execution is important. When there is no work, I would like to scale down over time as well. Here is my small tent to reach a suitable with competition from Java API design...
  
  Now, looking at my options, it seems that ScheduledThreadPoolExecutor is a good match for my needs. So what I would like to implement is a mechanism to define the minimum and maximum number of threads that are created for the thread pool. I understand that it is the number of threads of"base" and the maximum number of threads in the java.concurrency terminology. However, I struggle to create what I would.
  
  It seems to me that the ScheduledThreadPoolExecutor is always created as a fixed size thread pool. So I can't set that I would have say minimum of threads 1 and a maximum of 10. There is the setMaximumPoolSize() method, I can call on the executor, but he seems to have no effect. If I create my own ThreadFactory, and use that to give me track when new threads are created, create a ScheduledThreadPoolExecutor with one set of threads 1, fixed the limit 2-wire and plan a set of 6 ongoing tasks in loops, it never starts higher than 1 threads. So it seems that it completely ignores the setMaximumPoolSize().
  
  There is the option to call allowCoreThreadTimeOut() and setKeepAliveTime() on the executor. When I look in the code of ScheduledThreadPoolExecutor, I also see that he prestarts always all discussions until number of threads core set when a task is scheduled. So even if I got the coreThreadTimeout and keepAliveTime for work, attributes that can not help me because it would always just he hike up base number. Otherwise maybe I could use that have a 0 min and max of the number of"basic". Or is the coreTimeOut for some other purpose?
  
  Well, the question of the "base" here is, is it possible I could create an executor who creates a number dependent threads according to the need (between x 1 and x 2 that I would define, for example, 1-10) but achieved x 2 at the start of the queue of tasks that come? It seems that the whole API is to assume I want either a fixed number of threads with the unbound queue or an unlimited number of threads with a queue bound. No way to have a set bounded discussions with min and max thread bodies, as well as the queue without terminals when the max thread count is reached? And can I get that with ScheduledThreadPoolExecutor enough, please?
  
  Or maybe I'm just the idea of simultaneity just bad here for somewhere? Is a kind of best practices of competitive access to pigs immediately the maximum number of threads, you think you might need later conflicts of resources? This is why there is only the size of the "fixed"? In all cases, ideas and help is appreciated.
  
  Well thanks for reading this far... and all answers of course!

  Yes, this particular scenario is difficult to achieve, and Yes, it seems that the standard behavior for me as well. You can sort of achieve this effect by using the feature "allow core of timeout threads. Basically, build you a pool of 'fixed' size with a queue boundless, but the flag 'allow the kernel thread timeout' set to true. This will essentially give you what you want, except that the 'min' size is 0. This seems to be a reasonable compromise to me because you do not need to write custom code (I had already implemented a scenario you describe, a queue of unlimited blocking which 'lies' to be full until the maximum pool size is reached).

  example:

          ThreadPoolExecutor executor = new ThreadPoolExecutor(maxPoolSize, maxPoolSize,
                                                               60L, TimeUnit.SECONDS,
                                                               new LinkedBlockingQueue(),
                                                               threadFactory);
          executor.allowCoreThreadTimeOut(true);
          return executor;
  

• Web page looks good with tranparent and photographic background in mode boxes live view, but not in browsers

  If someone has the time to help, I would be very grateful.   I am new to dreamweaver and I try to make a transparent Web page with columns and text box using styles.  It looks perfect in 'live view', but when I look in any browser all the formatting has disappeared.  It looks like the background with the text at the top of installed on wrapped throughout the entire page.   I was not able to understand what is wrong in the days of research.  Anyone know the answer?

  Presents all first format I want and that's what it looks like in mode Live View, the second is what it looks like to most browsers.

  

  Here's the code I used:

  < / style >

  "" < link href = "... / styles/tcastyles.css" rel = "stylesheet" type = "text/css" >

  < style type = "text/css" >

  {body

  background-image: url (bamboo. (JPG);

  margin left: 150px;

  }

  a: link {}

  color: #600;

  text-decoration: none;

  }

  a: visited {}

  text-decoration: none;

  }

  a: hover {}

  text-decoration: none;

  }

  a: active {}

  text-decoration: none;

  do-family: Verdana, Geneva, without serif.

  do-size: 12px;

  make-weight: bold;

  }

  a {}

  do-size: 12px;

  }

  body, td, th {}

  do-family: Verdana, Geneva, without serif.

  }

  . Container .faqs h2 {}

  line-height: 40px;

  }

  . Container .faqs ul li {}

  text-align: left;

  }

  .footer {}

  Padding: 5;

  position: relative;

  Clear: both;

  }

  < / style >

  < div class = "container" >

  < div class = "header" > < span class = "menutable" > < / span > < img border = "0" src = "navigate_projects.jpg" width = "307" height = "167" well = "#FPMap0" alt = "Conservation agency - project Menu" align = "absmiddle" / > "

  < map name = "FPMap0" >

  < area shape = "rect" coords = "112, 132, 172, 127" href = "asia.htm" alt = "Asia" / >

  < area shape = "rect" coords = "138, 92, 286, 110" href = "west.htm" alt = "Western Hemisphere" / >

  < area shape = "rect" coords = "138, 73, 279, 89" href = "flamingos.htm" alt = "British Virgin Islands" / >

  < area shape = "rect" coords = "131, 55, 249, 72" href = "turkscaicos.htm" alt = "Turks and Caicos" / >

  < area shape = "rect" coords = "121, 35, 244, 52" href = "newengland.htm" alt = "Narragansett Bay" / >

  < area shape = "rect" coords = "103, 17, 306, 32" href = "coyote.htm" alt = "The Coyote Study Narragansett Bay" / >

  < area shape = "rect" coords = "121, 128, 173, 144" href = "pacific.htm" alt = "Pacific" / >

  < / map >

  < / div >

  < div class = "menu" >

  < table width = "100%" border = "0" align = "center" id = "menutable" >

  < b >

  < td height = "30" align = "center" valign = "middle" > < p > < strong > < a href = "mission.htm" > Mission < /a > < / strong > < /p > < table > ' "

  < td height = "30" align = "center" valign = "middle" > < p > < strong > < a href = "pubs.htm" > Publications < /a > < / strong > < /p > < table > ' "

  < td height = "30" align = "center" valign = "middle" > < p > < strong > < a href = "projects.htm" > project < /a > < / strong > < /p > < table > ' "

  < td height = "30" align = "center" valign = "middle" > < p > < strong > < a href = "opps.htm" > opportunity < /a > < / strong > < /p > < table > ' "

  < td height = "30" align = "center" valign = "middle" > < p > < strong > < a href = "sponsors.htm" > Sponsors < /a > < / strong > < /p > < table > ' "

  < td height = "30" align = "center" valign = "middle" > < p > < strong > < a href = "coyote.htm" > NBCS < /a > < / strong > < /p > < table > ' "

  < td height = "30" align = "center" valign = "middle" > < p > < strong > < a href = "guana.htm" > Guana < /a > < / strong > < /p > < table > ' "

  < td height = "30" align = "center" valign = "middle" > < p > < strong > < a href = "tca.htm" > contact us < /a > < / strong > < /p > < table >

  < td height = "30" align = "center" valign = "middle" > < p > < strong > < a href = "index.htm" > home < /a > < / strong > < /p > < table >

  < /tr >

  < /table >

  < / div >

  < div class = "banner" > study of the Bay of Narragansett Coyote < / div >

  < d/div >

  < div class = "box739" >

  < h3 > what do NBCS? < / h3 >

  < p > since 2004 the Bay of Narragansett Coyote study (NBCS) has developed strategies of coexistence and based management sciences for our most recent top-level predator.  Coyotes, originally a species of Prairie, have successfully colonized all parts of the continental and coastal us over the past 100 years. They reached the islands of Narragansett Bay in the middle of the 1990s. Since then the coyotes have become more and more abundant and problematic in some communities of the island. < /p >

  < p > in our history of cohabitation with the coyotes people constantly tried to eliminate them by hunting, trapping and poisoning. Lethal removal worked for individual problem animals but did not work as a strategy of population control. Why? Coyotes have physiological and behavioural abilities intrinsic to control their own numbers. If the coyotes are removed they increase reproduction and numbers to rebound quickly. The trigger of critical population regulation is competition for food. As long as the coyotes are well fed (with a few coyotes competing for food) their populations will grow. < /p >

  < p > we know also that the opposite effect occurs if the coyotes if the coyotes are stressed by competition for food. If there are too many coyotes competing for the available food coyotes will drop the sustainable level of these resources. < /p >

  < p > understanding of this relationship, the NBCS scientists decided to study the use of the resources of coyotes on two islands of Narragansett Bay, Rhode Island. We used GPS to find out location necklaces where coyotes are spending their time. We have made the assumption that if we could identify food resources important coyote - control - coyotes defray their own numbers. NBCS called & quot; management passive coyote. & quot; < /p >

  < p > since 2005 when we are caught in the trap and to collar our first coyotes on the island that we found continuously as the most important food resources of our study are provided people. This means that they are in our command this means that we can control the coyotes. If we remove anthropogenic resources (human grants) coyote numbers will drop to the sustainable level of natural resources. When the coyotes are fed only natural prey number of coyotes (mice, woodchucks, rabbits, geese and deer) will be lower and they will provide useful pest services. < /p >

  < p > according to our science NBCS generated a set of < has href = ' coyotes/best' practices for Coexistence with Coyotes - 8 Nov 2010.pdf management target = "_new" > best management practices for Coexistence with Coyotes < /a > - essentially a Toolbox for safe and sustainable community management, coyote. We work with the cities in our study area to adopt the CBMPs and be the first community in the nation to successfully and sustainably manage coyotes. We believe also in other cities and towns might be able to use our results as a template if they have problems of coyote. We have barely begun to implement the CBMPs on our islands. We soon hope to have all our implementation of the CBMPs cities - only, then we will see the full impact they make on the coyote numbers and behavior problems. You can follow our progress on this Web site. < /p >

  < / div >

  < div class = "footer" >

  < table width = "100%" border = "0" cellspacing = "5" >

  < b >

  < td > top < table >

  < td > < a href = "mailto: " [email protected] "> [email protected] < /a > < table > "

  < /tr >

  < /table >

  < / div >

  < / div >

  < / div >

  < p > < / p >

  < / div > class iv = "FAQ" >

  < H2 > FAQS < / h2 >

  < ul >

  How can < li > I coyotes control their own population? < /li >

  < li > blah blah blah < /li >

  < /ul >

  < / div >

  < div class = "content" >

  < div class = "Yopougon" >

  < div class = "col1" >

  < h3 > Middletown adopts the CBMPs and passes an order of non-Feeding! < / h3 >

  < / div >

  < div class = "col2" >

  < h3 > driver, Java and the Valley Pack < / h3 >

  <

  And here's the styles:

  . Container {}

  height: 1500px.

  Width: 975px;

  border: 8px solid #660000;

  float: left;

  }

  . Header {}

  float: left;

  height: 170px;

  Width: 975px;

  background-color: #033000;

  }

  .menu {}

  background-color: #FFC;

  float: left;

  height: 30px;

  Width: 975px;

  do-family: Verdana, Geneva, without serif.

  do-size: 9px;

  color: #660000;

  make-weight: bold;

  margin-bottom: 5px;

  }

  .table {}

  do-family: Verdana, Geneva, without serif.

  do-size: 8px;

  make-weight: bold;

  }

  . Banner {}

  float: left;

  height: 100px;

  Width: 739px;

  do-family: Verdana, Geneva, without serif.

  font size: 37px;

  make-weight: bold;

  color: rgba (0,51,0,1);

  background-color: rgba (255,255,204,.7);

  text-align: center;

  line-height: 75px;

  border-radius: 5px;

  padding: 5px;

  margin: 5px;

  }

  {.clearbox}

  float: left;

  height: auto;

  Width: 760px;

  }

  {.box739}

  Width: 739px;

  float: left;

  height: auto;

  background-color: rgba (255,255,204,.7);

  do-size: 12px;

  color: rgba (0,51,0,1);

  border-radius: 5px;

  padding: 5px;

  margin: 5px;

  }

  {.faqs}

  float: right;

  height: 620px;

  Width: 205px;

  do-family: Verdana, Geneva, without serif.

  do-size: 12px;

  make-style: normal;

  line-height: normal;

  overflow: scroll;

  background-color: rgba (255,255,204,.7);

  margin: 5px;

  border-radius: 5px;

  make-weight: bold;

  color: rgba (0,51,0,1);

  text-align: center;

  }

  {.col1}

  float: left;

  height: 500px;

  Width: 359px;

  background-color: rgba (255,255,204,.7);

  do-size: 12px;

  border-radius: 5px;

  color: rgba (0,51,0,1);

  margin: 5px;

  padding: 5px;

  }

  {.col2}

  float: left;

  height: 500px;

  Width: 359px;

  background-color: rgba (255,255,204,.7);

  do-size: 12px;

  border-radius: 5px 5px 5px 5px;

  color: rgba (0,0,0,1);

  padding: 5px;

  margin: 5px;

  }

  .footer {}

  position: relative;

  Clear: both;

  background-color: rgba (255,255,204,1);

  do-size: 12px;

  color: rgba (0,51,0,1);

  }

  From the looks of your screenshot, I'd say it's a path problem.  Are you sure that you downloaded the CSS document when you loaded the page and that the path is correct?  It appears in your second screenshot that there is no style applied so your stylesheet is not included for a wrong path or because it is simply not there.

• Problem of UK with ASP and Access database date format

  I have an Asp form that updates of the records in a database Access. It comes
  the date of the registration of database format is dd/mm/yyyy (UK), when
  the folder is displayed in the form, it is mm/dd/yyyy (US) who, after I
  update the record in the database, the date has changed to the new format.
  
  I tried everything I can to change the format
  vain... someone at - it any ideas how I can fix this?
  
  
  Thank you
  Steve
  
  

  Stevo.s wrote:
  > Hi
  >
  > I tried to change the format on the date field on the server behaviors
  > panelto DDMMYYYY. Also have tried to define the field of form DDMMYY format. I have
  > also tried to use a function that I got from a somehwere to post on the net or not
  > avail. < %="" fonction="" ddmmyyyy(vardate)=""> < br=""> > DDMMYYYY = Day (DateValue (varDate)) & "/" & Month (DateValue (varDate)) < br=""> > & "/" & Year (DateValue (varDate)) < br=""> > end function < br=""> > < br=""> > I believe that it is a problem with Dreamweaver and access but < br=""> > can't seem to grasp her work around! Problem being that I teach myself through < br=""> > books and internet articles and can take weeks at a time without being able to < br=""> > watch question... whenever I come back to it, it's like start all over < br="" >="" >="" nouveau !="" j’espérais="" que="" quelque="" part="" de="" sortir="" là,="" il="" y="" a="" une="" solution="" simple="" le=""> < br=""> > may deliver a datePicker with the built-in functionality to address the < br=""> > question... I am wanting to understand how to deal with the issue rather than simply < br=""> > change my date field of database to fudge the issue that I'm in England and when I < br=""> > eventually start using the application, I wish there is some < br=""> > coherence with the dates of arrival and that users are familiar with the format. < br=""> > < br=""> > any help gratefully received!

  Its not Dreamweaver, or access, its your settings regional servers, his game to the United States < br=""> format, not in the United Kingdom.

  On your page at the top of the page using:

  < %="" session.lcid="2057" %="">

  This will force the page using UK format dates. Use it on any
  page to format the page correctly.

  Dooza
  --
  Display guidelines
  http://www.Adobe.com/support/forums/guidelines.html
  How to ask Smart Questions
  http://www.CatB.org/ESR/FAQs/smart-questions.html

• Remote debugging with Apex and SQL Developer

  Hello
  
  I try to turn on remote debugging with Apex and SQL Developer.
  
  I can debug the PL/SQL procedure when it is called from SQL * PLUS, but when I call the procedure from Apex 'Process', the debugger does not stop at breakpoints.
  
  I checked that the procedure is called Apex process as I can see 'things' happening in the procedure but the debugger does not stop at breakpoints. The program being debugged (session Apex) manages to fix the SQL Developer debug listener.
  
  Apex (OnSubmit) process
  ---------------------------
  
  BEGIN
  
  DBMS_DEBUG_JDWP. CONNECT_TCP ('10.176.20.225', 4000);
  DONOTHING;
  DBMS_DEBUG_JDWP. DISCONNECT;
  END;
  
  
  Procedure
  -------------------------------------
  CREATE OR REPLACE
  PROCEDURE DONOTHING ACE
  testvar VARCHAR2 (100);
  BEGIN
  update cross-set test_data = 'I came here 11111'; -It is run
  commit;
  testvar: = "aaa"; -bREAK POINT IS HERE
  DONOTHING END;
  /
  
  Thanks in advance,
  Paresh
  
  Published by: pyadav1 on November 19, 2008 15:19

  Hello

  Sorry... seems I was too hasty in reading your question...

  You also gave * DEBUG ON [Parsingschema]. [procediurename] * APEX_PUBLIC_USER (or ANONYMOUS or HTMLDB_PUBLIC_USER). Otherwise, the behavior is exactly the same as you have described...

  The privilege of the DEBUGGING SESSION to CONNECT need to given to the schema analysis but the APEX_PUBLIC_USER schema needs debug privilege on the function or procedure...

  Does that help?

  Carsten-