HTTP exception and buttonfield seteditable

Similar Questions

• Message "this connection is not approved. After choosing 'I understand' Add 'except' and 'confirm dry', need me a modified version of the site.

  Almost all sites Web generates a message "this connection is not approved. After choosing "I understand the risks", "Add exception" and "Confirm Security Exception", it takes me to a lighter version of the site that looks nothing like the real site. Also, I get this message on the sites of Mozilla trying to solve the problem. Under the technical details, it reads, "the certificate is not reliable because no sender string has been provided. (Error code: sec_error_unknown_issuer) "the articles I've read on this subject do not seem to help.

  This happened after I restored it firefox to default settings. I have a copy of my personnel file on my desktop. I tried to put it back in, but nothing changes. I've deleted and reinstalled firefox a few times.

  Any idea would be appreciated. Thank you for your community!

  Unfortunately, certificates of do_not_trust could be a sign of unwanted software on your pc that is to intercept the secure network traffic. go to the system control panel and uninstall programs such as BrowserSafeguard, BrowserSafe, backup or other software that seems suspicious and did not get intentionally installed by you.
  
  _{Reference: https://support.mozilla.org/en-US/questions/982532#answer-520145}

  afterwards, run a full scan of your system with security tools like the free version of malwarebytes & adwcleaner.

  Fix Firefox problems caused by malicious software

• I've updated VIA / S3G UniChrome IGP plug-and-play reverse, but the update still no resolution 1600 x 1200 with the exception and others with the same ratio of 4 x 3.

  I've updated VIA / S3G UniChrome IGP plug-and-play reverse, but the update still no resolution 1600 x 1200 with the exception and others with the same ratio of 4 x 3. That did not help.

  Hello

  1. What version of Windows are you using?
  2. What is the brand and model of the computer?

  I suggest to run the patch from the following link and check the status of the issue.

  Hardware devices do not work or are not detected in Windows.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  If the problem persists, I suggest you to send us more information to help you better.

• I have Firefox 8.0.1 and since the update to it, some sites, I need to go so that Firefox will not accept certificates which is accepted in the previous version. I can not get the permanent exception and must uncheck permanent and do every time.

  I have Firefox 8.0.1 and since the update to it, some sites, I need to go so that Firefox will not accept certificates which is accepted in the previous version. I can not get the permanent exception and must uncheck permanent

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: opens showing the file

  It is not usually necessary to create an exception for the certificates.
  
  Possible causes are that a server does not send the full (intermediate) certificate chain or self signed certificates.

• You can take form expired exception and reload the page?

  I have a cfcalendar wrapped with cfform, every first start the application, it is empty, or give me form as a message data has expired.

  I tried to put cfform timeout for 100 or 200 seconds, but if you close the application and the next time it opens (if after time-out limits) it shows that the data in the form has expired message again. If I don't value or set it to 0, then the next time I open the browser, it gives me a blank form page.

  So I wonder if there is a way to intercept this exception and make then reload the page?

  Any ideals to solve the problem.

  ...

  < cfoutput >

  < name cfheader = "expires" value = "#now () #" >

  < name cfheader = "pragma" value = "no-cache" >

  < name cfheader = 'cache-control' value = "no-store, no-cache, must-revalidate" >

  < / cfoutput >

  < name cfform = "testForm" format = "flash" onLoad = "" #disableRanges # "height ="320"width ="420">"

  < name cfcalendar = "selectedDate".

  SelectedDate = "" #Form.selectdate # ""

  mask = "mmm dd, YYYY".

  dayNames = "" SU, MO, YOU, WE, TH, FR, SA ' "

  monthNames = "" JAN, Feb, MAR, APR, MAY, June, July, August, SEPT, OCT, NOV, DEC ""

  style = "" rollOverColor: # FF0000; ' "

  width = "270" height = "200".

  OnChange = "getURL ("index.cfm? selectDate = "+ (selectedDate.selectedDate.getMonth () + 1) + selectedDate.selectedDate.getDate () + ' /' + ' /' + selectedDate.selectedDate.getFullYear ());'"

  >

  < / cfform >

  ...

  Thank you

  Bill

  The problem with adding preloader = "true" tage in cfform.

• HTTP 403 and cannot see the photo in the APEX 4.0

  Hello
  I created a new database of 11.2 on win 7 (64-bit) and migrate an APEX application. It worked very well. But when I try to run this app, I get errors opening a picture (Http 403) and I Pascal see the photo icons. Ther I see only a red "x" on the top side.
  
  ICH think there is lack of rights, but I don't know what.
  
  Please help me
  Concerning
  Siegwin

  Hello

  OK, if you have pictures in your own table, and doc_disp_image_display is the custom procedure.

  While you gave in the v_pdet_picture table?

  Also because it is personal you should post you code of procedure.

  And you have allowed the procedures can be performed in URL?
  This could help. The same for 11g
  http://daust.blogspot.com/2006/04/XE-calling-stored-procedures.html

  Kind regards
  Jari

• Do not save password, even if no exceptions and the site is not limited

  I used to have my password for AA.com saved. I change my password on aa.com and when firefox was asked if I wanted to record a new, I clicked never remember for this site. Realizing my mistake, I removed all exceptions to the saving of password. I can still save my password for aa.com. This works for all the other sites and it works on other computers for aa.com. Everything just not on this computer.

  The AAdvantage number on the login page field uses autocomplete = off to prevent Firefox to record the name and the password.

  • https://www.AA.com/login/loginAccess.do

  You can remove autocomplete = off with a bookmarklet to register the name and the password of Firefox.

  • http://KB.mozillazine.org/User_name_and_password_not_remembered
  • Saved password Editor: https://addons.mozilla.org/firefox/addon/saved-password-editor/

• Whenever I try to open the Add/Remove Programs folder I get an exception and cannot access it?

  Windows XP, SP3, IE8... Since Saturday, whenever I try to access the Add Remove Programs, I have ' exception occurred at the "C\WINDOWS\systerm32\shell21.dll,Control_RunDLLappwiz.cpl", and I can't access it to add or delete anything... (I recently reformatted the computer) abput 3 weeks ago) and everything was going well so far... using System Restore to a point where I knew it was patch work it? (this would be my last!) ... or running the scandisk on start up option can fix this?... any help would be appreciated... of course don't want to have to reformat again!... someone else asked me that maybe one of the "updates" I put in recently may have caused?

  Lynxstch,

  Hello and thank you for visiting the Microsoft answers community.

  I've included some knowledge base articles that may help you:

  Incorrectly, Add/Remove Programs tool displays installed programs

  XP system restore

  I have also included a 3 part of the article, but does not guarantee to this topic:

  http://www.LIUtilities.com/products/wintaskspro/dlllibrary/wizcpl/

  I also suggest creating backup before starting to make changes.

  Good luck and I hope this helps.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• ESW-540-8 P, http connection and browsers

  Howdy,

  Portal: cisco-onplus

  VAR: 1913

  Client: 5651 (USS Nautilus SSN-571)

  Version: with On - 100K 9

  ESW540 - 8 p on a network with the default settings. The goal is to connect through proxy http OnPlus http (kubrick) devices management I / F and change the settings.

  By the compatibility of the devices for ESW540, I define http (port 80) as a method of connection and allow to "set the headers.

  Using a PC connected locally, I checked that I can establish http connection directly (without proxy OnPlus) using IE, firefox, and Safari browsers on multiple platforms (2 win 7 PCs (FF, IE, Safari), 1 iPhone4. () Safari).  In all cases, I'm able to establish the http connection to the ESW540 connection - 8 p and perform operations remotely on the device http user interface through the user interface of the browsers.

  However, when I try the same when connected remotely through OnPlus, I get different behaviors for success/failure in the browser I use.

  When I use Firefox or IE, as soon as I click on the 'Connect' button on the modal system, a browser window is launched as planned.

  For IE (IE7) on both Win7 computers, 10 seconds after the launch of the window, the device UI presents its login screen. I provide credentials for the connection. Soon after, a partial rendering of the page main 'status' for the device is presented on the user interface of the browser. I can see the CSS styles of painting, but I see no text, areno visible URL and the simulation planned device indicator is not visible. Clearly, the appliance http server enabled connection. Shortly after the connection information has been presented, a dialog box appears that States "disconnected from server...". "xlx...

  For firefox (FF 6.02) on the two WIn7PCs, I get the same behavior with one exception - the connection process does not have the point of view of the page for the device UI http authentication.

  Note, I am able to navigate, to connect to and manipulate all the pages of the user interface http to a cable modem TWC ODM built... using any platform and one of the three browsers.

  Also of note, I have configured the ESW540 - 8 p to the backup configuration file automatically and every night. This automatic access (using the credentials provided in the "References" of the modal device tab) works very well... even if she does not resemble his support in the list of devices.

  I suspect that it is a FF/IE browser config issues with specific pains of Kubrick (Java?). But I'm just guessing. Fortunately, I have Safari on all three devices, so this isn't a big deal. Ideallly, however, I prefer using FF - manage my browser of choice for all the other things-webby.

  Any help appreciated.

  See you soon,.

  Dave

  PS - I told you lately how 'killer' this "Cisco OnPlus" remote service is? It is beautiful thing you've built.

  Captain Howdy!

  The ESW540 was a little 'fun' with cross-launch. We expect a potential MR later this fall that may be able to answer some of these questions. In the meantime, I'll get the documentation updated to reflect the following details on ESW540 support.

  1. the port 80 and "Headers of difficulty" are correct configuration items to set for cross-launch.

  2. the Safari browser works fine, but you have to ignore the pop-up "lost connection". Everything works perfectly.

  3 Firefox has a particular problem. When you connect first with firefox, you'll get an error. It is different with different versions of firefox. If you copy the URL and open a new window, and then paste the URL into the new window, things will work (again, with the message lost connection to ignore).

  4 IE tends to work perfectly, without any problem. I have only tested with IE8. There could be a problem with IE7.

  These problems come from the fact that OnPlus was not there when the ESW has been developed and switches don't usually do the test to be able to withstand to be connected through a firewall. New SMB devices are tested with OnPlus in order to avoid this type of problem in the future.

  Specifically, there is a behavior of Web Management page in the ESW trys to be compatible with all web browsers and it breaks down when you launch into another page, or by an indirect method.

  Enjoy,

  Robert

  PS I'm glad you like it. Your praise seems strangely familiar though ;-)

• Cannot install windows - MEMORY_MANAGEMENT exception and blue screen

  Hello

  IM unable to install windows on my laptop computer, because whenever I try to install it, after installation there is exception MEMORY_MANAGEMENT and blue screen. It all started since a few exceptions on my previous windows which gives began several exceptions like DRIVER_IRQL_NOT_LESS_OR_EQUAL as errors and PC rebooted each time. Then I thought to install new windows and the problem started. I'll be very grateful if you look forward to my problem

  Thanks :)

  First run Memtest86 +:

  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test:
  (1) If you do not know your readers make / model number AND your computer is no longer able to load Windows:
  (a) Renmove the drive of your desktop and check the label for the serial number and model.
  (b) remove the bottom cover of your laptop, remove the disc and check the label for the serial number and model.

  (2) If Windows is still usable, install 'Speccy', it provides information of the computer/system in detail on your:
  OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
  Note: Option RAM indicates number of slots, DRAM Timing.
  Works your memory speed (frequency). The nominal frequency of your memory.
  http://www.Piriform.com/Speccy

  Test drive - create a Bootable CD:
  (or connect the drive to anther PC and install the appropriate test software)

  Note: Reliability of the drive hard has come the way down over the last 24 months and improved a bit lately according to manufacturing.
  Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.

  List the factory utilities, walk.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors.
  SeaTools for information: http://www.seagate.com/support/downloads/seatools/
  SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
  SeaTools for DOS download:
  http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/

  For Western Digital disks, download the file .iso from WdDiag:
  http://support.wdc.com/product/download.asp?GroupId=613&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm

  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities

  Notice of Fujitsu drive management utility: http://www.fujitsu.com/us/services/computing/storage/hdd/

  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  Also try Home Edition free Partition Wizard option "Test of disc surface":
  http://www.partitionwizard.com/free-partition-manager.html

  = Test SSD - modified software: 24/10/14 =.

  Intel® drive SSD Toolbox
  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18455

  Corsair SSD Toolbox:
  http://www.Corsair.com/en-us/blog/2013/may/the-Corsair-SSD-Toolbox

  Toolbox of Kingston:
  http://www.Kingston.com/us/support/technical/sandforce_ssd_toolbox.aspx

  OCZ Toolbox: http://ocz.com/consumer/download/firmware

  PNY support: http://www.pny.com/support/contact-us

  Samsung: http://www.samsung.com/global/business/semiconductor/minisite/SSD/global/html/about/whitepaper07.html
  Samsung Magican review:
  http://www.TweakTown.com/articles/5638/Samsung-magician-4-2-first-look-new-SSD-Toolkit-adds-rapid-mode/index.html

  SanDisk SSD Toolkit: http://kb.sandisk.com/app/answers/detail/a_id/9328/

  Seagate: http://www.seagate.com/support/internal-hard-drives/laptop-hard-drives/laptop-600-ssd/

  Life of the SSD: http://ssd-life.com/

  J W Stuart: http://www.pagestart.com

• Understanding Pragma Init Exception and others then exception...

  Hi gurus,

  I understand that using the pragma init exception, allows you to associate the user with valid error plsql code defined error message.

  But can not be managed using so that other then an exception? Using sqlerrm and sqlerrcode, we can display error messages and log them.

  Could you please help me understand this?

  Thank you

  I understand that using the pragma init exception, allows you to associate the user with valid error plsql code defined error message.

  Correct - the doc of the PL/SQL language

  http://docs.Oracle.com/CD/E11882_01/AppDev.112/e25519/exceptioninit_pragma.htm

  The EXCEPTION_INIT pragma associates a name of the exception defined by the user with an error code.

  . . .

  Error_code

  Error code for being associated to exception . error_code may be 100 (digital code for "no data found" this 'function SQLCODE' return) or any negative integer greater than-10000000 except-1403 (another digital code for "no data found").

  This doc link also has examples of using the pragma

  But can not be managed using so that other then an exception? Using sqlerrm and sqlerrcode, we can display error messages and log them.

  Could you please help me understand this?

  First – understand this: If you do not go to 'manage' exception you shouldn't use an exception handler initially. Let the exception propagate up to the appellant.

  Second - you should NOT use THEN than OTHERS as a replacement for an appropriate exception handler.

  Which of them do you find easier to read, understand and maintain?

  1-60

  2 DEADLOCK_DETECTED

  Don't you think that ANYONE, no matter how expert, recalled all of the Oracle error codes? The names are much easier to understand than a number.

  The pragma is used so that you can explicitly declare an exception handler for one of the unnamed Oracle error codes.

  New - see the documentation

  http://docs.Oracle.com/CD/B19306_01/AppDev.102/b14261/errors.htm#BABGIIBI

  To handle error conditions (generally ORA- messages) who do not have predefined name, you must use the OTHERS Manager or the pragma EXCEPTION_INIT .

  A pragma is a compiler directive which is processed at the time of compilation, not running.

  In PL/SQL, the pragma EXCEPTION_INIT tells the compiler to associate a name of the exception to an Oracle error number. Allows you to make reference to any inner exception by name, write a specific handler for it. When you see an error in the cell, or sequence of error messages, one on top is that you can intercept and manage.

  The pragma is used to catch an exception that "should" occur in the execution. Then, this exception can be handled. If it is NOT handled (for example if you just connect it) the exception handler should re - raise the exception rather than just swallowing it.

• Unable to connect to the website of 'http', steam and App Store

  I use a Macbook Pro 13 inch, mid-2012 with OSX Yosemite 10.10.5. I had a problem with my network which I cannot connect to the 'http' site in Google Chrome or Safari. It shows ' site is not reachable, refused to sign, ERR_CONNECTION_REFUSED '. In addition, I can not connect to Steam and it shows 'code error - 102, unable to connect to the server. "Server may be offline or you cannot be connected to the internet". I can access the App Store, but most of the app doesn't load the image, and it seems weird that I cannot install or update applications from the App Store. It is said "we could complete the purchase. Cannot connect to the server'. Finally, I can connect to the Web site "https" as google.com, facebook.com, youtube.com, and apple.com. I don't know what I was doing before that happens because I'm not all of the firewall settings or IP network since I bought it. I don't even no matter what antivirus installed on my macbook. I do not think that the problem of my wifi because it works fine on my other devices. I try to fix but still have no luck.

  Here what I was trying to fix my problem:

  1. I try to restart the computer, then reconnect to my wifi - nothing fixed

  2. I have try to change the DNS 8.8.8.8 and 8.8.4.4 - still not fixed, worse still, unable to connect all Web sites

  3. I try to delete the Library/Preferences/SystemConfiguration folder and restart the computer - nothing has changed

  4. I try to start safe mode and it works very well and when I reboot to normal, it still happens

  5. I try to remove and re-add the Chrome in the firewall settings to allow incoming connections - nothing fixed

  6. I try to delete all the data navigation and cookies in Chrome and Safari - still not fixed

  7. I try to plug in the ethernet cable, as a first step, it works very well. Then, when I disconnected and reconnected again for the second time, and then he had the same problems.

  What I saw here, I check that iTunes had recently many updates with the same version of iTunes 12.4.1 since June 4, 2016 (1 time), June 5, 2016 (1 time), June 6, 2016 (2 times), June 7, 2016 (7 times), June 8, 2016 (2 times), June 10, 2016 (9 times), June 11, 2016 (1 time) and June 12, 2016 (1 hour). I don't know if this is normal or not because he had to download and installed about 24 times with the same versions! It is possible that iTunes is the cause of this problem? Any help and suggestions that can solve my problem? Thanks in advance!

  Is your date and time is set correctly? 5 minutes from the perfect?

• Firefox refuses to stop the blocking of pop-up windows - up, even with added exceptions and blocker completely disabled.

  I work in a facility that uses a corporate intranet to access our database. The database uses windows pop up widely important information. Problem is that Firefox absolutely will NOT stop block popup windows no matter what I try. At first I added our database server to the list of exceptions. It worked for a while, but soon after resumption of the important pop-up blocking. I then completely disabled the blocking of popup windows (options > > content > > unchecked "block popup windows"). It did not work until I closed and reopened Firefox. A week later (today!), Firefox takes over again blocking the pop-up windows. I double checked my settings to confirm that Firefox still claims to have the popup blocker off.
  At this point, I am at a loss on how to proceed. I looked at other issues similar and my frustration (and certainly their even more), individuals requesting repeatedly told them to turn off the blocker of popups even after explaining that they already have. Help would be very appreciated.

  Thanks for the description of the Firefox Safe Mode. I just thought that Safe Mode is a condition under which we could launch Windows XP in a minimal operating system by starting a startup sequence, hold down the F8 key and effectively manage the prrams troubleshooting and maintenance for Windows. It seems that the Windows XP of Firefox version could run not affected by a virus, a worm or other malware, and ge fixed.

  Please try this Linux distribution. They are many, and I'm a fan.

• I have a ton of cookie exceptions, and sometimes I need to change one of "blocked" to "allow". Is there a way to 'search' to this file?

  Paging through all the exceptions of cookie, to find the one that is causing me not not be able to access a site is becoming impossible. For example, I want to use the ESPN fantasy football site, but at some point, I have decided to 'block' one of the many cookies they wanted to define. Now, I can't get into the site, and I have no chance of finding the offending cookie. Is there a way to search for this file exceptions (or permissions) so I can find the cookie faster?

  It might be easier to use the subject: permissions page?

  In a new tab, type or paste Subject: authorizations in the address bar and press ENTER. Controls showing your default settings will be displayed first and it will take probably several seconds to load the sites. You can use the above the left column search box to find the site you want to adjust.

  A little luck?

• When I type something in the search box, it will in https mode and when I continue searching that nothing happens, IE search engine does not react. Thank you.

  When I type in the search box 1st time the Google page looks fine in https mode, but when I want something else type in the search box, nothing happens.

  You can check whether DOM Storage is enabled.

  You can check the pref (s) dom.storage.enabled on the topic: config page.

  • http://KB.mozillazine.org/about:config

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do not click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode