HTTPS (port 443) is blocked http works very well. I tried everyting HELP

Similar Questions

• WiFi worked very well. Tried to connect the second device. "Wi - Fi auto-assignée 169.254.49.8 IP address and won't be able to connect... »

  One of our MacBook has been connected to the internet through our router base station Airport Express wireless and wifi worked very well. All of a sudden, the other MacBook could not connect. After a few days of no connection on one while the other worked, we rebooted the modem. Now neither laptop connects. We called our ISP and they verified that all is well with our internet service or the modem. Internet works fine with the cable plugged directly on each machine. Under network in system preferences, I get this message: "Wi - Fi 169.254.49.8 auto assigned IP address and won't be able to connect to the internet." When I run the diagnostic, I get a message saying that my network configuration has changed, but it has not changed anything. We have never gone and nothing changed since we first set up the modem and the AEBS. Any ideas on how to solve this problem?

  Yes, the express can do that... Suddenly lose the configuration and return to the bridge for example even when connected to a modem to bridge.

  The solution is simple... Press reset and redo the Express installation.

  NOTE... an Express is not expected that the main router... It's light to etc. of airprint, airplay wireless bridge. Don't wait to have no problems when you use the Express to do the work of the extreme or TC or another router should do.

• RTMP server connected, but not video in the player. HTTP works very well

  Hello

  
  

  Here, a problem, I put http server which is connect and video game,.

  But server rtmp connected but the video does not.

  Trace of information :

  trace (event.info.code) = NetStream.Play.Reset, NetStream.Play.Start (output in flash)

  http Host

  ------------------

  var videoURL:String = "http://www.helpexamples.com/flash/video/cuepoints.flv";
  var connection:NetConnection;
  var stream:NetStream;
  var video:Video = new Video();
  NetConnectionExample();
  function NetConnectionExample()
  {
   connection = new NetConnection();
   connection.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
   connection.addEventListener(SecurityErrorEvent.SECURITY_ERROR, securityErrorHandler);
   connection.connect("null");
  }
   
  function netStatusHandler(event:NetStatusEvent):void
  {
   switch (event.info.code)
   {
   case "NetConnection.Connect.Success" :
   connectStream();
   break;
   case "NetStream.Play.StreamNotFound" :
   trace("Stream not found: " + videoURL);
   break;
   }
  }
   
  function securityErrorHandler(event:SecurityErrorEvent):void
  {
   trace("securityErrorHandler: " + event);
  }
   
  function connectStream():void
  {
   var stream:NetStream = new NetStream(connection);
   stream.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler1);
   theVideo.attachNetStream(stream);
   stream.play(videoURL);
   addChild(theVideo);
  }
   
  function netStatusHandler1(event:NetStatusEvent)
  {
   trace(event.info.code);
  }
   
  function onMetaData(info:Object):void {
          trace("metadata: duration=" + info.duration + " width=" + info.width + " height=" + info.height + " framerate=" + info.framerate);
      }
      function onCuePoint(info:Object):void {
          trace("cuepoint: time=" + info.time + " name=" + info.name + " type=" + info.type);
      }
   
   
  

  Host RTMP

  ------------------

  var videoURL:String = "filename.flv";
  var connection:NetConnection;
  var stream:NetStream;
  var video:Video = new Video();
  NetConnectionExample();
  function NetConnectionExample()
  {
       connection = new NetConnection();
       connection.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
       connection.addEventListener(SecurityErrorEvent.SECURITY_ERROR, securityErrorHandler);
       connection.connect("rtmp://servername.host.com/foldername");
  }
   
  function netStatusHandler(event:NetStatusEvent):void
  {
       switch (event.info.code)
       {
            case "NetConnection.Connect.Success" :
                 connectStream();
                 break;
            case "NetStream.Play.StreamNotFound" :
                 trace("Stream not found: " + videoURL);
                 break;
       }
  }
   
  function securityErrorHandler(event:SecurityErrorEvent):void
  {
       trace("securityErrorHandler: " + event);
  }
   
  function connectStream():void
  {
       var stream:NetStream = new NetStream(connection);
       stream.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler1);
       theVideo.attachNetStream(stream);
       stream.play(videoURL);
       addChild(theVideo);
  }
   
  function netStatusHandler1(event:NetStatusEvent)
  {
       trace(event.info.code);
  }
   
  function onMetaData(info:Object):void {
          trace("metadata: duration=" + info.duration + " width=" + info.width + " height=" + info.height + " framerate=" + info.framerate);
      }
      function onCuePoint(info:Object):void {
          trace("cuepoint: time=" + info.time + " name=" + info.name + " type=" + info.type);
      }
   
   
   
   

  I think that with rtmp you want to delete the file suffix... so try:

  var videoURL:String = "filename";
  

• How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can?

  Switch issues. Help, please.

  How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can? We already checked the firewall as a question, that it was not, and now, we are puzzled.

  Well, I know that the issue is long-term... believe me, it's a long, but as they say, the devil is in the details. Anywho, the question is, my grandfather has a HP laptop, which for two years has been able to run through a Linksys switch to his router and connect its printers to his laptop. About two months ago it suddenly doesn't work like that. Now, it works fine if it plugs directly into the router/Ethernet. My uncle suggested that the switch was bad, but after testing the same port, cable and all, the switch worked well for him. ' GRAMPS really needs this answered, but someone else, it is called can not understand and now I, in turn, ask you all for what you can offer. Here are the ideas that we have already discredited.

  -Switch bad: as above, is that this particular laptop, even under identical conditions, the works of my uncle very well.
  -Bad NIC: debunked through the fact we connected to the computer directly to the router and it worked fine.
  -Bad configuration of the firewall: we have disabled the firewall (please do not notice, he wasn't the smartest idea, we already know) and even if she recorded the switch exists, the internet is always triggered when you are connected with the switch.

  Thanks in advance for any assistance that you can provide and Merry Christmas to you all.

  It would be useful to consult the results of the ipconfig/all command both when it is connected to the switch and when it is connected directly to the router.  In addition, what is the model of the switch?

  To save the manual copy and the new hits of the ipconfig/all command output-

  First connect through switch.
  Open a command prompt window (start > run > cmd > OK)
  Type the following lines in the black command prompt window and press ENTER after each line

  echo "Connected via the button" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".

  Now connect directly to the router, type the following lines in the command prompt window and press ENTER after each line

  echo "Connected to the router" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".
  Notepad '% UserProfile%\Desktop\ipinfo.txt '.
  output

  Copy the contents of the Notepad window in your response (if you use the laptop when it is connected directly to the router) or close the Notepad window, and then copy ipinfo.txt of the laptop to the Gramps in a USB FlashDrive you can connect to any computer allows you to answer.

  You can delete ipinfo.txt on the desktop when you are finished.

• Firefox does not display my photo site properly, or play music from it on my new computer. I have 2 other PC and it works very well on those.

  Just set up a new PC and downloaded Firefox. It will not display correctly my Zenfolio Photo site or it will play music that accompanies the slideshow on the home page. I have 2 other PC and it works very well on them. All are Windows 7 Home Premium.

  Yes. He uses Flash to show the images and music. Go to tools-> Add-ons and check the Plugins. Make sure that Shockwave Flash 16.0.0.305 is not set to never turn on. I keep me always activate.

  If you do not see flash, can get Adobe Flash here: https://www.adobe.com/products/flashplayer/distribution3.html and the EEG for the Plugin-based browsers.

  If flash is installed, then it sounds like something is blocking.

• Real-time application does not work; source code works very well

  The short version is I'm programming a cRIO and apparently the RT code isn't running after you deploy, and I can't understand why. It is further complicated as I do all this remote and I don't have direct access to the unit since I am 500 miles away. I work through a couple of other guys who know some LabVIEW, but neither is working on the site so that they explicitly trip there whenever I have a bright idea.

  I was there a few weeks ago. During this time, I created a code simple cRIO, since I'm new to the cRIO, allowing the user to move a control and change a chart. It worked fine, but I must stress that it did not have a FPGA component. After that, I worked on the actual code, which reads some sensors, displays the results on a user interface and stores the results. Did FPGA. I used it in the LabVIEW environment and it worked fine, but I ran out of time before I could finish a release build and deploy the RT as a compiled application. I sent them the version later, my contact deployed but had the network stream errors during execution of the user interface.

  After hours to address network problems and sending over debug versions, I tried to create a log on RT level so I could see what was going on. The journal is not yet open, even if it is the first command in the code. I have pores through the forums and found http://forums.ni.com/t5/LabVIEW/cRIO-Troubleshooting-creation-and-deployment-of-startup/td-p/1956475... which took a new direction.

  I had my contact use the RT debug console and when it pulls up to the front of the RT, it shows an arrow broken at delivery. He clicked and nothing happens - no work, no list of bugs. If he shoots to the top of the list of bugs manually, it is empty. Again, the RT works very well if you run it through LabVIEW and not as an application compiled in real-time. He also noticed that the open FPGA VI was grey on the block diagram. Are no other icons.

  If the problem seems to be that the compiled application of RT becomes some kind of error, but do not tell me what it is, and it seems to be related to the opening of the FPGA. I recompiled the FPGA and RT. I recompile the RT himself, but not the FPGA, because this would take hours. It is download everything properly for the cRIO. The RT is set to run automatically. It is restarted the cRIO whenever he deploys the RT. They have LabVIEW on a computer, but it doesn't have the correct drivers to run the code of the environment of LV. I am to resist have them install the dirvers because downloading big files is complicated due to the restrictions of security as well as a lousy connection at a remote site. In addition, it does not solve the problem of RT executable doesn't work is not the same as the source code, which, according to the thread above, seems to be a thing.

  The last thing I'm getting is that I sent her instructions for how to build a source distribution of the project that I sent and try to deploy on the cRIO. Even if it works, I'm not sure that this is an acceptable solution, because I assume running VI, rather than the EXE is slower, and they need to speed on this project.

  Simply, I don't know where to go from here. I probably need to get direct access to the cRIO and I might be able to convince them to ship to me so I can understand this point, but I don't know where I got same departure other than the Voodoo debugging standard of "trying stuff randomly until something works". I am open to suggestions, if someone managed to solve this before.

  Code snippet of the first part of the project is fixed, although I don't know how much what good it will do. I am really confused, and the customer is frustrated with how much budget is going to solve this problem.

  
  

• Security Essentials works very well after installation, but when I turn the computer off it does not start at the top. That you uninstall that reinstall. Who is wrong?

  Getting a message that my system is blocking the program but their isn't an indication that my system is interfering with its operation. Antivirus programs have been removed from my computer; That is to say. Norton Antivirus, Symantec Antivirus. Firewall doesn't seem to have this effect on the operation of Security Essentials. Why I get this message when I restart my computer is a mystery to me, because it works very well after downloading until I restart my computer. My email address is > * address email is removed from the privacy *.

  Hello

  Did you change your computer before this problem?

  A possible reason for this problem is that you have installed entirely or partially on the computer security software conflict.

  You may need to use a cleaning tool to remove your prior security software:

  Microsoft Security Essentials - Installation Checklist and frequently asked Questions

  http://experts.Windows.com/w/experts_wiki/89.aspx

  If the problem exists, you can ask your question in the Forums of Microsoft Security Essentials.

  http://answers.Microsoft.com/en-us/protect

• 2nd WVC54GCA works very well on the LAN, but I don't see it on the internet

  I recently bought a 2nd camera, so I can remotely monitor the 2 places home. The first camera that I put in place with the other default values that address static ip, I gave him, shipped port port 80 and when I type in my dynamic dns name like "http://myname.dyndns.org:80" it works very well, in fact I have same need to type the port number and it works. The dynamic dns used to take me direct to my configuration of routers (WRT54GL) but now I just type in: 8080 to the end to get to the configuration of the router to the internet. In any case, it works well and I can take pictures, live video monitor, movement detected email snaps etc. without any problem.

  Then I bought a 2nd WVC54GCA and together to the top of the same thing, he has assigned a static IP address and on the options page I activated the replacement web access port and left port 1024, port forwarded in the router with the new ip address and the port etc.  I can access the camera very well via a browser on my local network using the ip address: 1024 or the 'myname.dyndns.org:1024', but I can't access the cam 2nd via the net now. I am confused at this point, I didn't know that a second dynamic dns would be necessary since the device is configured to use a different port, and when I try using the ip address: 1024 it makes no difference anyway.

  Am I missing something here?

  What I thought was the problem wasn't, I had my port of port of port forwarding on the same number, and when you set the parameter port internal address port forwarding port, which is 80 in the case of the linksys cam.

  Once again that I realized that however, 1024 still wouldn't work, so I changed it to 8081 since my routers gui port is 8080, and I had to change the port setting to 81 in port forwarding and add: 81 to my dns address for it to work.

  Linksys should be ignored during the first 80 or some thing, or perhaps 80 is the default, because before when I wanted to join my router gui all outdoor I had was my dnyamic dns name without the: 8080, and when I added a cam to the network it would go directly to the cam, unless I specifically set : 8080 to the end.

  In any case, I have now the two cams work and accessible. For what it's worth, if there are people from linksys playback of this member of the Board they are terrible docco to explain things, the monitoring software is buggy as all get out and if I struggled as a computer scientist looks at work then the average schmoe stands little or no chance...

  My $.02

• whenever I open the installer from Adobe, it always say that "trying to connect to the server...". ». Please help me. I don't know what is happening, but my WI - Fi works very well. Adobe needs to know that this facility is very important for me

  whenever I open the installer from Adobe, it always say that "trying to connect to the server...". ». Please help me. I don't know what is happening, but my WI - Fi works very well. Adobe needs to know that this facility is very important for me!

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

• ORA-00034: cannot run sessionbut of PL/SQL, it works very well in plsql

  SQL> select UTL_URL.unescape ('http://search.music.google.co.jp/musicsearch?cc=d1&cp=%A5%DE%A5%B8%A4%C7%B4%B6%BC%D5', 'UTF-8') from dual;
  select UTL_URL.unescape ('http://search.music.google.co.jp/musicsearch?cc=d1&cp=%A5%DE%A5%B8%A4%C7%B4%B6%BC%D5', 'UTF-8') from dual
         *
  ERROR at line 1:
  ORA-00034: cannot  in current PL/SQL session
  ORA-06512: at "SYS.UTL_URL", line 28
  ORA-06512: at "SYS.UTL_URL", line 170
  ORA-06512: at line 1

  but it works very well in plsql/block
  

    1  declare
    2  v varchar2(500);
    3  begin
    4  v :=UTL_URL.ESCAPE ( 'http://search.music.google.co.jp/musicsearch?cc=d1&cp=%A5%DE%A5%B8%A4%C7%B4%B6%BC%D5', FALSE, 'UTF-8') ;
    5  dbms_output.put_line(v);
    6  v :=UTL_URL.unESCAPE (v, 'UTF-8') ;
    7  dbms_output.put_line(v);
    8* end;
  SQL> /
  http://search.music.google.co.jp/musicsearch?cc=d1&cp=%25A5%25DE%25A5%25B8%25A4%25C7%25B4%25B6%25BC%25D5
  http://search.music.google.co.jp/musicsearch?cc=d1&cp=%A5%DE%A5%B8%A4%C7%B4%B6%BC%D5
  
  PL/SQL procedure successfully completed.

  Please help solve this error
  
  I need to do this in sql without pl/sql
  
  Thank you
  
  Published by: ivw on Nov 21, 2009 05:06
  
  Published by: ivw on Nov 21, 2009 05:09

  You try to call a function in SQL that violates the rules of "how functions should behave when she is called in SQL.

  In other words, someone seems to have coded UTL_UTL. Escape() or UTL_UTL. UNESCAPE() with a COMMIT or ROLLBACK in the code. Which is not allowed in the functions that are called in a SQL statement.

  I suggest that you raise a Service request to get it looked at properly.

• Use Firefox with flash 10.3.183.75 20.0.1, can not see the video if its built-in Flash. Can see perfectly if they are not incorporated. Chrome works very well.

  http://64.165.34.7:8134 / videoplayer3.html works well, but http://64.165.34.7:8134 / flash_ready.html does not load video in Firefox (black screen with the plug-in is needed, when you try to install "couldn't find any plugin"). Chrome works very well. IE shows an outline of the flan.

  flash_ready.html
  <!DOCTYPE html>
      <html>
          <head runat="server">
              <title>
                  HTML5 sample video player
              </title>
  </head>
  <body>
   <form id="Schedule" runat="server">
      <div >
  	  <EMBED height=500 width=700 src=http://64.165.34.7:8134/videoplayer3.html allowscriptaccess="always" wmode="transparent" allowFullScreen="true">
          </EMBED>
  		</div>
  		</form>
  </body>
  </html>
  
  videoplayer3.html
  <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
  <html xmlns="http://www.w3.org/1999/xhtml">
  <head>
  <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
  <title>Sample HTML5 Video player</title>
  
  </head>
  
  <body>
  
  <h1>Sample HTML5 Video player demo</h1>
  
  <object type="application/x-shockwave-flash" data="http://flashfox.googlecode.com/svn/trunk/flashfox.swf" width="640" height="360">
  	<param name="movie" value="http://flashfox.googlecode.com/svn/trunk/flashfox.swf" />
  	<param name="allowFullScreen" value="true" />
  	<param name="wmode" value="transparent" />
  	<param name="flashVars" value="controls=true&amp;poster=http%3A%2F%2Fsandbox.thewikies.com%2Fvfe-generator%2Fimages%2Fbig-buck-bunny_poster.jpg&amp;src=http%3A%2F%2Fclips.vorwaerts-gmbh.de%2Fbig_buck_bunny.mp4" />
  	<img alt="Big Buck Bunny" src="http://sandbox.thewikies.com/vfe-generator/images/big-buck-bunny_poster.jpg" width="640" height="360" title="No video playback capabilities, please download the video below" />
  </object>
  <p>
  	<strong>Download video:</strong> <a href="http://clips.vorwaerts-gmbh.de/big_buck_bunny.mp4">MP4 format</a> | <a href="http://clips.vorwaerts-gmbh.de/big_buck_bunny.ogv">Ogg format</a> | <a href="http://clips.vorwaerts-gmbh.de/big_buck_bunny.webm">WebM format</a>
  </p>
  </body>
  </html>

  I used this instead of < embed >. He began working

  < object type = "text/html" data = "http://64.165.34.7:8134 / videoplayer3.html" style = "width: 460px;" "height: 260px" > < / object >

• You tube use work very well for me in Fire Fox... Now the habit... I don't remember changing anything whatsoever.

  You tube shows just a black screen, works very well in internet explore.

  Haven't upgraded or changed versions of firefox or added any plug=ins Im awarer of.  Had several automatic updates come through of other programs, such as flash, ect.  But I have refused to upgrade firefox due to having to give up screen grab which I love too much to do it, so have stayed with  older version.
  

  Had no problem with you tube in the past.
  

  First, you must immediately update to Firefox 15.0.1. There are major security issues in Firefox solved in 15.0.1 7.

  In regards to your add-on, it will probably work in Firefox 15 (addons are now default to compatible). If this isn't the case, you can try to install https://addons.mozilla.org/en-US/firefox/addon/screengrab-fix-version/ which is an update on the same module version.

  After update, let me know if the youtube problem is still happening.

• V13 Firefox slow to access the voice mail or google google works very well in internet explore

  I just updated firefox to v13 and now its really slow to access the google mail and google voice. I get a message that it is connect to google, but nothing happens. works fine on internet explore. other web sites seem to work end

  Hello

  I use V14.0.1

  I had simliar problems both at home and at work while using Firefox. IE and chrome works very well in these two places.

  While I am at home, and not using any proxy, it worked after disbaling spdy i.e. network.http.spdy.enabled set to false.

  However, when I'm at work (by browsing through a proxy, Ironport in this case) and it does not work. I noticed that it is not only the keyword google search or google sites, but none of the https / ssl working site. He invites me repeatedly for authentication of the proxy, and even if I type my proxy username and password, it does not work.

  I have been with older versions of firefox for a while and have not had this kind of problem before.

  Any idea?

• 12 Firefox on OS Lion does not obtain the crash report on a second account on the past. On the main account (admin) it works very well and also on a third test account.

  12 Firefox does not get beyond the crash report. This is a second account (standard). However, it works very well on a third party, as well as on the main one admin account. I reinstalled Firefox, disc repaired permissions and so on, but nothing helped. For the second account .plist file could be damaged? I can't remove it because of permissions so cannot test this. Please notify.

  Try to repair disk permissions:

  • http://thexlab.com/FAQs/repairprocess.html
  • http://guides.MacRumors.com/Repairing_Permissions

• Java plugin does not not in Firefox 4.0b11, works very well in 3.6.13

  Java plugin is not loading in Firefox 4.0b11, but it works very well in 3.6.13 (and in Google Chrome too). It worked in Firefox 4 before, but broken somewhere around beta 5. libnpjp2.so is not really in the plugins folder, but it is a symlink: /libnpjp2.so -> /usr/lib/jvm/ia32-java-6-sun-1.6.0.12/jre/lib/i386/libnpjp2.so. When running the command line, I see FF tries to load other plugins of symbolic links (most associated with totem) but do not because they are amd64 and FF is built in 32-bit. But none of the messages on libnpjp2.so (which IS 32 bits).

  Java 1.6.0.12 is old enough, then you can try to install the latest version of Java 6 U23.

  • http://www.Oracle.com/technetwork/Java/javase/downloads/index.html (Java platform: download JRE)

  See also http://kb.mozillazine.org/Java