HUNGING PC EVEN AFTER FORMATTING AND INSTALLING NEW DRIVERS

Similar Questions

• Sector recovery Vista TTG boot after format and installing XP

  First machine is a DELL inspiron 1545
  OK, this is somewhat complicated and I tried a few options.
  I formatted the primary partition and installed XP after which discovered the recovery partition that I cannot now access via CTRL + F11, and a few other combinations I tried.

  I won access to the partition via ubuntu so I know it's all there and intact.

  I tried to use imagex to restore image files of vista on the recovery partition which they are 2 (spl_vista.swm spl_vista2.swm) so I used the order of REF. but I got a CRC error.

  I tried to use imagex to restore another image file in the HDDRE folder. WIM, but that the image has no MBR

  I was able to start the the recovery partation I discovered was a techguys recovery system by changing the active partition through diskpart, but he told me that he could not find the HARD drive, I also tried to boot to a DMS and had the same result.

  any ideas on the means may restore the vista on this machine?

  Hello

  We cannot help you difficulty dell recovery partition

  It's their recovery partition, not Microsoft

  Contact Dell for any additional assistance with their recovery processes

  _______________________________________________

  Try these methods to reinstall vista

  Contact the manufacturer of Dell and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• My definition updates are not common even after downloading and installing all the updates that are available in my Norton product.

  On Norton 360 first Edition, my anti-virus definitions are obsolete. I can't update them even after download of Defender. I've tried everything.

  Jim McGlothan

  Hello

  Contact the Norton Support about problems with their product

  http://www.Symantec.com/support/index.jsp

  __________________________________________________

  and what do you mean you downloaded Defender

  Windows Defender is part of Vista

  you don't download it from anywhere

  Are you sure that you have not downloaded a fake malware program?

  read the links below

  http://www.bleepingcomputer.com/virus-removal/remove-Windows-PC-Defender

  http://www.bleepingcomputer.com/virus-removal/remove-desktop-Defender-2010

  http://www.bleepingcomputer.com/virus-removal/remove-total-PC-Defender

• After format and install Win XP Home and SP3 why can't open the Microsoft web sites?

  Need help, guys

  I had to replace my HARD drive in my computer. I installed my Windows XP Home SP2 disc. After installation, I used my SP3 upgrade drive and my drive to upgrade to IE8. After you install all my drivers, I tried to get Windows dates and discovered that I could not access the Microsoft web sites. I get Internet Explorer cannot display this page. I tried to find out why this is happening and how to correct the situation, but have not found an answer that works yet. Can someone give me an answer to this question.

  I have another (used) computer that I formatted the HDD installed and on Windows 7 and have had no problems to access the Microsoft web sites on. It uses the same modem cable like the other computer so I guess that everything is ok with my Internet connection. This problem seems to be only with Windows XP Home SP 3.

  Think in advance for any help

  Btk (billy the kid)

  Please do not share in the whole "BOLD". Which makes it hard to read!

  Please check that SP3 is installed:
  Start | Run
  Type:
  winver
  Press OK.
  Also, tell us what you mean by "trying to get Windows dates" since there are two ways to do this!

• WOT has disappeared even after downlaoding and install is still missing. In addition, the address bar icon says "this Web site provides no identity information.

  WOT has disappeared. Donwloading / new installation appears to work but still WOT not in the list of modules. The icons of the web in the address bar are grayed out and "this website does not provide identity information" replaces the normal site identity information. Everything seems to be as usual.

  I used the option rebuild in firefox to start safe mode again and as expected my addons went and now I installed WOT and adblock, others to follow. Thank you.

  My copy of firefox is on this machine for a long time, while it was probably time to restart from scratch.

• volume level missing meter after accident and install new hard drive. The volume level indicator does not display when I raise or lower the volume. How to show again?

  volume meter

  Hello

  You have reinstalled the drivers for your audio card yet? Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Hi, I installed an Alfred Workflow (see code below) that will mark all my mails as read. After you run it for a minute, the mail has crashed and I had to forcequit. However, now, when you open the Mail it crashes instantly, even after restart and repair o

  Hello

  I installed an Alfred Workflow (see code below) that will mark all my mails as read. After you run it for a minute, the mail has crashed and I had to forcequit. However, now, when you open the Mail it crashes instantly, even after restart and repair the permissions. I also used the Ctrl + C and CTRL-Z commands in the Terminal to leave the alfred_script, but nothing helped. I'm running out of ideas here, so I hope you could help me either reinstall the mail.app. I could always just switch to a different mail application, but it's kind of a last resort.

  Code:

  Tell application "Mail".

  Define allAccounts on each account name

  Repeat with currAccount in allAccounts

  the unreadMboxes value (each mailbox to the account currAccount the unread number is not 0)

  Repeat with currMbox in unreadMboxes

  (read status of each message to currMbox including the playback State is set to false) true value

  end repeat

  end repeat

  tell the end

  Any input would be greatly appreciated. Can post the report of crash on demand.

  Not sure that Alfred's, but it's just an Applescript script and it would not cause Mail to be planted.

  However, when running through all the messages, it is possible Mail database has been corrupted and it crashes because of this.

  I'll probably get anything out of the accident report, but others might.

  My first instinct would be to rebuild the mailbox. Because you can't do that with him crashing, you can simply delete the databases and it will rebuild them.

  Navigate to this folder:

  ~/Library/Mail/v3/MailData/

  You can either manually through the files, or copy the full path and paste it into go the folder in the menu go to the Finder.

  Remove the envelope Index files. Open Mail and see if it works well.

  If your library does not appear in your folder, hold down the Option key and select library in the menu go to in the Finder.

• C 200 1 GB Sansa no storage, even after format; Unable to update software

  Hello

  before all sorry for my bad English.

  I have some problems with my sansa c 200 1 GB. Lately, the player had no storage, even if there is no songs on this subject. This problem persisted even after format. I went on the forum and that you try to upgrade the drive with new software (because I think it's a software problem). They wrote, there

  "Hold the record button until the"new hardware is ready to use"rises, and then press the record button."

  It does not, the player is connected to the computer (and does not display 'new hardware is ready for use'). I tried several times but it does not help (a few years ago, I needed a software update and it worked well (so I'm not stupid to push the right buttons); o)

  Thank you for your help,

  kulturkugel

  Since it is a C200 try to format using the MP3 itself. Go to settings and under settings, choose the format and we'll see what happens.

  Hope this helps.

• Format and install Snow Leopard on Mac Mini

  Hello

  • I have a Mac Mini
  • Using boot camp, I have a Win10 partition which is now, the entire hard drive.  Really.
  • I have the installation of Mac OS X Snow Leopard (10.6.3) DVD
  • I directly connect the optical drive and a wired keyboard to the system
  • Start by pressing the [CTRL] key.
  • Download the white screen with the Apple logo in the middle of it.
  • .. then nothing.  He's here.  After 10 minutes, I pull the plug and restart the Windows partition and return to the slaughter of these discussion forums for clues.

  Issues related to the:

  1. How do I FORMAT and INSTALL Snow Leopard on the Mac Mini or m, I was too impatient after the [Ctrl] restart using the OS X DVD? 
  2. Is there an external utility that I should get to format the drive?
  3. I can do this in steps - can I install OS X on an external HD and then use it for the crater / rebuild the primary drive?

  Input greatly appreciated!

  Rade

  usually it is booting by pressing the C key to start from the CD-ROM/DVD-ROM drive.

  or start by pressing the Option key to get a list of the bootable devices that you can choose from.

  See <Startup for Mac - Apple Support combinations>

  NOTE: This does not imply that you run your Mac mini Snow Leopard.  I guess that your wording she used to run Snow Leopard, and that your Mac mini still has a DVD/CD player are good signs.

• Why some web pages become corrupted even after I re - install Firefox even when I don't save my favorites?

  Why some web pages become corrupted even after I re - install Firefox even when I don't save my favorites?

  Do you mean that you can attach a screenshot that show what distortion?

  • http://en.Wikipedia.org/wiki/screenshot

  Use a type of compressed as PNG or JPG image to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).

• can I format and install el capitan on a cover attached to the eternal road

  My MACBOOK pro is having hard drive problems. It is partitioned to run el capitan and windows 7. the partition main mac only get 75 to 80% through the start-up procedure and then hang up.
  I tried to run disk security recovery volume. zap the PRAM, tried to secure boot and FSCK nothing helps.
  I ordered a new SSD drive and need to get el capitan on the new drive.
  can I format and install el capitan on the new drive if it is attached to the macbook with a hard drive by using the 10.11.1 housing recovery tools before starting the installation in my macbook.

  Another option is to see if the local genius bar formats an installer usb for me.

  thoughts?

  Thank you

  Yes, you should be able to select a destination drive during installation. Is that what you mean?

• HP Envy 5530: HP Envy 5530 told to replace the color cartridge, even after replacing with a new one.

  HP Envy 5530 said to replace the color cartridge, even after replacing with a new one.  Printer is 1 year old and I replaced the cartridges several times over the past year.  I am enrolled in the program of HP ink.  I can run the printer mode single cartridge using a black ink only and it works with my pc XP, Ipad, Chrome pc and mobile phone.  My pc win 8.1 will not print anything other than a test page.  Printer on the pc file lists always attention required when you try to print from the pc win 8.1.  I believe that the problem may be related to surface of cartridge for printing inside the HP envy heads 5530.  This part is available for purchase, and if so, where?

  I found a work around.  On the pc win 8.1, it seems that the print request must see a reset of the HP envy 5530 to print mode single cartridge.  I just start the pc and then reset the printer by lifting the hatch for the print heads.  That's all.  Once this is done, the 'attention required' message goes to the loan and it is able to print.  It will open a window, which suggests you add the color cartridge, but it will disappear when printing.  Simply open the door once and you can print until you turn off the pc.

• DW CS6 does not open in OS 10.9.5, even after uninstall and reinstall (several times)

  DW CS6 does not open in OS 10.9.5, even after uninstall and reinstall (several times).

  I tried to delete all the prefs with the name of Dreamweaver in Library/preferences and in application Support/adobe. Doesn't change anything.

  Is there a conflict with something else? Is there something else I can do?

  Could be a permissions problem. Try to create a new admin-level Mac user account and see if that helps.

  Nancy O.

• Info CS5 Panel: after archive and install (osx)

  Hello

  After archive and install (10.5.9 Intel osx) I see the file information panel (Photoshop CS5) Virgin... I have to force quit, how could it?

  
  I've used it before to archive and install without problem, shoud repair permissions on flash panels or someother?

  I have the same trouble with Illustrator, Fireworks, and Indesign... only in file-> file Info Panel.

  Best regards. Robert

  Hi Robert,.

  Create a new text file called XMP.cfg (make sure that the extension is cfg and not txt).

  The only text that should be in this file is as below:

  / Library/Application Support/Adobe/XMP/Custom File Info panels.

  Restart the Adobe application and review the file information panel.

• I have Asus EeeBox bought with XP preinstalled. I formatted and installed XP Home different reception of the CD of XP with key EeeBox COA. Is - this perfectly legal according to the policy of Microsoft?

  I have Asus EeeBox bought with XP preinstalled. I formatted and installed XP Home different reception of the CD of XP with key EeeBox COA. Is - this perfectly legal according to the policy of Microsoft?

  It is the key which is the basis of the license, rather than the disc.