Hyper-V 3.0 and PE2950II

Similar Questions

• Activation of Hyper-V and results in a hung system restarting...

  Hello

  I have a HP Envy 23 all-in-one desktop computer with processor Core i7 and 8 GB of RAM. It came with pre-installed Windows 8 (x 64) home.

  I upgraded to Windows 8 Pro (x 64) and activated the Hyper-V feature (Tools for managing Hyper-V and Hyper-V platform). After you add the feature, the system prompted me to restart for the changes to take effect.

  However, after reboot, the system is not come upward (the screen is empty) - I thought I'll leave the system to do anything, he was. The next morning, the screen was always empty even though the system has been powered and was not admissible.

  Turn off the system and turn back brought the system in diagnostic auto mode - auto repair has failed and I had to restore the system to a previous restore point.

  Once connected, I returned the dialog box add features and noticed that the Hyper-V check box is now disabled and all the icons for Hyper-V splash screen disappeared.

  I tried to add the Hyper-V feature again and the result was the same. No idea what could be wrong here?

  Thank you

  AJ

  Note: I turn on the hardware support for virtualization in the BIOS.

  Note 2: Here's the CoreInfo dump:

  Intel Core i7 - 3770 S CPU @ 3.10 GHz
  Intel64 family 6 model 58 Stepping 9 GenuineIntel
  HTT * Hyperthreading enabled
  HYPERVISOR - hypervisor is present
  VMX * virtualization to support supports Intel
  SVM - Supports AMD hardware support for virtualization
  EM64T * support 64-bit mode

  SMX * Supports Intel trusted execution
  SKINIT - Supports AMD SKINIT

  NX * Supports non-performance page protection
  RID * supports the DEP to the supervisor Mode
  SMAP - Media supervisor Mode access prevention
  PAGE1GB - supports large pages of 1 GB
  EAP * supports physical addresses > 32 - bit
  PAT * supports the attribute Page of table
  PSE * supports 4 MB pages
  Pse36 * support > 32 - bit address 4 MB pages
  EMP * ILO global media in the table on page
  SS * bus media snooping for cache operations
  VME * Supports virtual-8086 mode
  RDWRFSGSBASE * takes direct charge of the basic GS/FS access

  FPU * implements i387 floating point instructions
  MMX * Supports MMX instructions
  MMXEXT - MMX AMD Implements extensions
  3DNow - Supports 3DNow! instructions
  3DNOWEXT - Supports 3DNow! extension instructions
  SSE * supports the Streaming SIMD Extensions
  SSE2 * supports Streaming SIMD Extensions 2
  SSE3 * supports Streaming SIMD Extensions 3
  SSSE3 * supports SIMD Extensions additional 3
  SSE4.1 * supports the Streaming SIMD Extensions 4.1
  SSE4.2 * supports the Streaming SIMD Extensions 4.2

  AES * extensions support AES
  AVX * extensions intruction media AVX
  FMA - supports the FMA using State YMM extensions
  MSR * Implements RDMSR/WRMSR instructions
  MTRR * Supports Memory Type Range registers
  XSAVE * Supports XSAVE/XRSTOR instructions
  OSXSAVE * media XSETBV/XGETBV instructions
  RDRAND * instruction supports RDRAND
  RDSEED - supports instructions RDSEED

  CMOV * instruction supports CMOVcc
  CLFSH * instruction CLFLUSH media
  CX8 * media compare and Exchange 8 bytes instructions
  Cx16 * instruction CMPXCHG16B support
  BMI1 - Media bit manipulation extensions 1
  BMI2 - Media bit maniuplation extensions 2
  ADX - instructions of media ADCX/ADOX
  DCA - prefetch, supports mapped in memory devices
  F16C * supports education of half-precision
  FXSR * instructions media FXSAVE/FXSTOR
  FFXSR - support optimized instruction FXSAVE/FSRSTOR
  MONITOR * media MONITOR and MWAIT instructions
  Supports the MOVBE - MOVBE instruction
  ERMSB * improved support of the REP MOVSB/STOSB
  PCLULDQ * instruction supports PCLMULDQ
  POPCNT * instruction POPCNT media
  MS * supports fast system call instructions
  LAHF and SAHF * media LAHF/SAHF instructions in 64-bit mode
  HLE - instructions brackets Hardware Lock elision
  RTM - instructions of holders of limited transactional memory

  OF * breakpoints of e/s including CR4.DE support
  DTES64 * can write the history of branches of 64-bit addresses
  DS * Implements debugging residing in the buffer
  DS - CPL * function Supports Debug Store with CPL
  CCDI * media PCIDs and definable CR4. PCIDE
  INVPCID - supports instructions INVPCID
  PDCM * supports the capabilities of Performance, MSR
  RDTSCP * RDTSCP media statement
  TSC * instruction RDTSC media
  TSC-DEADLINE * APIC Local supports the time of one-shot timer
  TSC-INVARIANT * TSC rotates at constant speed
  Cx16 * supports disabling special priority messages

  EIST * Supports Enhanced Intel Speedstep
  ACPI * Implements MSR for power management
  TM * implements a circuit thermal monitor
  TM2 * control Implements Thermal Monitor 2
  APIC * implements the local APIC accessible by software
  x2apic * Supports x2APIC

  CNXT-ID - Adaptive L1 data cache or BIOS mode

  MCE * media Machine Check, INT18 and CR4. MCE
  MCA * Implements Machine Check Architecture
  PBE * supports the use of FFF #/ PBE # pin

  PSN - serial number of processor Implements 96 bits

  PREFETCHW * statement supports PREFETCHW

  Physical logical processor board:
  * - Physical processor 0 (Hyperthreaded)
  -* - Physical processor 1 (Hyperthreaded)
  -* - Physical processor 2 (Hyperthreaded)
  -* Physical CPU (hyperthreading) 3

  Processor Socket logic board:
  Socket 0

  Logical processor of card NUMA node:
  NUMA node 0

  Logical processor to Cache map:
  * - Cached data 0, level 1, 32 k, Assoc 8, LineSize 64
  * - Instruction cache 0, level 1, 32 k, Assoc 8, LineSize 64
  * - Unified cache 0, level 2, 256 KB, LineSize 64, Assoc 8
  Unified cache 1, level 3, 8Mo, Assoc 16, LineSize 64
  -* - Data Cache 1, level 1, 32 k, Assoc 8, LineSize 64
  -* - Instruction cache 1, level 1, 32 k, Assoc 8, LineSize 64
  -* - Unified cache 2, level 2, 256 KB, LineSize 64, Assoc 8
  -* - Data Cache 2, level 1, 32 k, Assoc 8, LineSize 64
  -* - Instruction cache 2, level 1, 32 k, Assoc 8, LineSize 64
  -* - Unified cache 3, level 2, 256 KB, LineSize 64, Assoc 8
  -* Data in Cache 3, level 1, 32 k, Assoc 8, LineSize 64
  -* Instruction cache 3, level 1, 32 k, Assoc 8, LineSize 64
  -* Unified cache 4, level 2, 256 KB, LineSize 64, Assoc 8

  Logical processor in the group mapping:
  Group 0

  Hello

  The question of "to enable Hyper-V" is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  Please post your question in the Technet Forum.

  You can follow this link to ask your question:

  http://social.technet.Microsoft.com/forums/en-us/category/w8itpro

  If you need further assistance, please answer and we will be happy to help you.

• Core i7 - both vmware and hyper V not running any X 64 Machine virtual (X 32 VM Client works on vmware Xp/vista) built on Windows Server 2008 X 64 basic

  The vmware and hyper V not running any X 64 Machine virtual (X 32 VM Client works on vmware Xp/vista) built on Windows Server 2008 X 64 Basic.

  Windows (pre install UI) error code install (0xc000035a) that the processor does not support X 64 Mode

  Any of that with core i7 system any help would be much appreciated, thanks

  -Software VMware Server 2.0.0 122956 - OR - VMware Workstation 6.5.1 126130 - OR- Microsoft Hyper V

  -Tried - BONE at BASE of MATERIAL AND the VM ENVIRONMENT

  X 64 Windows Server 2008 6001 - OR - X 64 Windows Server 2008 6002 - OR - X 64 Server Windows 7 6801

  System - Core i7 920 + X 58 (GA-EX58-UD5) + 6 GB DDR3 + OCZ SSD

  Intel Core i7 920 Webpage - http://www.intel.com/products/processor_number/chart/corei7.htm

  Gigabyte GA-EX58-UD5 - latest version of the Bios F3

  Web page - http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ClassValue=Motherboard & ProductID = 2958 & ProductName = GA-EX58-UD5

  Advanced features of MB Bios CPU - tried Both ON and OFF

  Hyper Threading - Threading 4 AND 8

  Intel Virtualization - ENABLE AND DISABLE

  Looked in the VM Bios as well

  6 GB DDR3 3X2GB 1600

  Please, see troubleshooting problems of Intel VT - x.

  Also note that you can not the role Hyper-V installed in the parent partition, if you want to run the VMware using VT products, as Hyper-V virtualizes the parent partition, but it only virtualizes the VT CPU features.

• Windows 2012 R2 (Hyper VM) does not start

  Hello

  Turn a Windows 2012 R2 Standard (Hyper V Virtual Machine) and pointed out that one cannot start up.

  When connecting to this virtual machine and I observe suite Manager:
  ==========================

  Windows Boot Manager

  Windows could not start...

  ....

  .....

  File:\Windows\system32\ntoskrnl.exe

  status: 0xc0000098

  ======================

  Turn off the virtual machine and start the vm and same message.

  Can advise on how to recover?
  Unfortunately, I do not have a backup available for this virtual machine image.

  Any urgent notice is greatly appreciated that what happens on my production server?

  Thank you

  RGS
  Alan

  Alan

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Windows vista and windows 7 is a nightmare

  I bought 2 new computers with vista installed had no choice about the operating system, I wanted to xp pro and discovered vista was so slow to load, I decided to switch to win 7 after all the hype on this topic and found that it was just as bad with the lack of opportunities and programs to remove etc. is much more difficult to find familiar things Why oh why have you not kept xp pro a system that has been thoroughly tried and tested and build on that instead of changing things to make it more difficult to find things there is a proverb that says if it is not broke do not fix find it me amazing a company as big as microsoft software highlights products that are fundamentally flawed and then highlights updates to fix these flaws any other product you buy it would be returned for a refund, but his microsoft because they get away with it. I'm surprised that microsoft was not taken to court on these new defective products'm sorry but am a user angry and decided to iron out these 2 machines and on the head to linux at their office is free. Looking at issues in forums and responses they receive many of these are avoiding the direct answer to the question for example WHY? Microsoft do not put in outlook express won 7 still no positive answer simply you have to d/l the other customer e-mail once again WHY?
  I'll be very surprised if this post is allowed all am doing is expressing what many people out there are thinking but don't say not to, but I said my piece and with no apology for the content.

  You can't find things in Vista/7 because you're not used it again. But you will see that you will learn very quickly.

  If you don't know where to look for something > Press Start > type inside the search box, what you are looking for. For example, type "Windows Update" and you will get a Windows Update tool as a first result. You want to configure the mouse, type "Mouse" in the search box, etc, etc...

  Why there is no Outlook Express... as I remember that it was not him secures the messaging client. You can use Windows Live Mail. Do not know how to find it... Yet once, type it in the Start Menu of the search box.

  There is also a great help (after pressing F1), I guess you know that, but not too many people use it. But it is more than you can imagine.

• Ask.Hyper Threading Hp mini 210-2037 you?...

  Hello, I just bought my mini 210-2037 Tu, evrything just beautiful, then all of a sudden Im wondering this netbook can't do hyper threading mode, even if the processor, takes in charge only mode

  I ask for help, its possible for my mini got hyper threading mode? and how to get there?... if its

  Thanks a lot before hand...

  Well even if I don't have the answer to my problems, but still this forum very useful to ask and understand our problem, I m really grateful because the forum.

  recently I can solve my problem on hyper threading fitur on my mini

  with/without a doubt I'm going to share some of my tips here

  (refer to my son, ' Activate Hyper Threading fitur on HP mini 210-xxxx proc n550 ")

• Issue of Dell PS6100 replication and DR

  Hello everyone, I have 2 PS6100 SAN in two other site (site A and site B) for DR purposes. The VM .vhd files are stored in a volume on site A SAN. While the volume is replicated to site b. replication works very well. Our MRC is the following: when A VM site goes down. 1 interrupt us the replication from site A to site B. 2 volume) we turn on the virtual machine to site B. 3) promote us the incoming line to site B. 4) attached to the Hyper-V host using ISCSI initiator. (5) provide online on Hyper-V host volume and assign a drive letter. (5) and then attach to VM. My question is, can the volume PS6100 repeated in volume? So I don't have to go through this process. I would like to just start the VM DR in site B and have the fixed volume. Details of the two sites: WAN link 40Mbps Dell EqualLogic Microsoft Windows Server 2008R2 host servers Microsoft Windows Server 2008R2 VM PS6100

  Hello

  N ° there is no direct replication like this.   You need to watch a replication based on the host for this ability.   You can only promote or clone a replica to access.

  Kind regards

• Display problem with hyper link text on the Blackberry HTML browser

  Hello

  There is a help section on the application I'm working on that. Basically, load us an html with the Blackberry HTML browser page and provide links hyper text severeal to other subsections providing hyper links text themselves until that user pages of real-world information (just typical help things).

  The last link of these pages are always displayed vertically. I've done more laps that I know not to try to solve this problem (including links hyper text in a list in a tab, but it keeps going that way no matter what).

  If you have already encountered this problem, thanks for sharing!

  I put links hyper texts in tables and it solved the problem. I try this in the first place, because the html tables are only supported for jde 4.6 (http://docs.blackberry.com/en/developers/deliverables/11843/BlackBerry_Browser-Fundamentals_Guide--5...).

  But if you only use

  ,and

  parentheses, they come with limited support, it works fine.

• Use of the disk Windows 8 Pro Hyper-V host to 100%

  Hi all

  I'm puzzled. I have a Windows 7 Pro VM a Windows 8 Pro Hyper-V host. When I start the virtual machine, the use of the disc on the drive that it is installed on goes to 100% (on the host). The entire disk, RAM & CPU usage seems normal on the host. The only symptom on the host is extreme latency when I click on things (!).

  As I said earlier, the host is running Windows 8 Pro. He has three physical disks - an SSD that the operating system is installed, and RAID two arrays totaling 18 to each. He has a physical processor, 6 hearts w/hyper-threading. 32 GB of RAM.

  The virtual machine is the only VM I allocated 16 GB of RAM w/dynamic RAM active I allocated 8 cores to it. The OS is installed on a virtual drive of 500 GB. I hung a second virtual disk of 4 TB (TPG), but it is currently offline. I thought maybe it was the problem, but the use of the disc is always maxed out at present. The only other thing I've tried, it is true that as a long-shot, had to change the location of paging on the other empty disk (on the host). That had no effect, either, and I will probably put it when I can. As I type this, the VM is restarted after installing Hyper-V integration services and an update of Windows (including SP1). This will probably take a while...

  Any thoughts are appreciated!

  Hi Jspartacus,

   

  Please contact Microsoft Community.

  I suggest you post your question in the TechNet forum for more help on
  in this issue. We have a dedicated team with tool in advance and Permission to help
  solve you this problem.

  Follow the link:

  https://social.technet.microsoft.com/Forums/windows/en-US/home?category=w8itpro.

   

   

  Please respond with the State of the question, so that we could help you
  better.

   

  Thank you.

   

• Responsive web design and google so bc modules work and play well and when?

  What is the truth and what is myth with the hype of British Colombia and the integration of the muse and delicate design?  What is the reality of managing the expectations of my customers?

  Please check this similar thread for more details:

  https://forums.Adobe.com/message/7458734#7458734

  Thank you

  Sanjit

• VMware ESXi 5.1 can run Microsoft Hyper-V Server 2012 SMV also, nice!

  I created a detailed instructions (with screenshots and video) using GA-level code here:

  http://tinkertry.com/ESXi-5-1-running-hyper-v-Server-2012

  using the "basic" version of the new Hyper-V, with tips and ideas from these forums and other sites on the previous beta tests.

  Here's the gist:

  • Create a "Microsoft Windows Server 2012 (64-bit)" VM, using the default Configuration
  • Right click on the new virtual machine and material virtual upgrade to Version 9
  • twist the VMX, adding these 4 lines:

  MCE. Enable = TRUE

  Hypervisor.CPUID.v0 = FALSE
  featMask.vm.hv.capable = Min:1″ «»
  VHV.enable = TRUE

  • Remember, it is assigned to a network where the vSwitch is Promiscuous Mode to Accept
  • Turn on the new machine virtual of Hyper-V
  • perform the default installation and configure Hyper-v, hard IP-code if you wish, create an Admin user and password name that matches a customer's system
  • create a Windows 8 'customer' VM, as the Hyper-V Manager takes just a few seconds to add
  • Difficulty of COM security on the client system
  • use Hyper - V Manager this virtual machine to connect to Hyper-V, and then...
  • create a Hyper-V hosted Virtual Machine, can connect you and turn it on to test

  I'm looking forward to suggestions or alternative methods, but for the moment, it was the only way I could get it to work in my own laboratory, thought that others might not want to try to replicate this exercise.

  Windows Hyper-V (not supported) is a selection of OS comments available through the user interface in Workstation 9.  It defines the guestOS to 'winhyperv '.  Although the selection of the BONES of Hyper-V is not available through the user interface of 5.1 ESXi, I understand that support it is always there.

• Hyperion 11.1.2 and HAL

  Hi all and Happy New Year!
  
  I'm new to the forum but have been reading many articles of interest to get answers to some questions. It is a great forum.
  
  Currently, we are at Hyperion 9.3.3 and use HAL (which I know is off) to update our metadata. We want to upgrade to 11.1.2 soon but do not wish to integrate Hyp 11.1.2 and ODI at the same time. I want to upgrade to 11.1.2 in the first draft, followed by conversion to ODI in a second project.
  
  My question is: HAL will continue to operate as is with Hyperion 11.1.2 until we can get converted to ODI?
  
  Thank you
  Jim

  HAL works with 11.1.2.1 (Essbase, Planning, HFM, etc), but as John says it should be subject to the ODI as soon as POSSIBLE if you are not GROUND.

  Thank you

  Todd Rebner

• How to download optimizer Woodvine of media, so I can watch the videos on tralala, offered by my public library.

  I tried to download the optimizer media Woodvine, which is required to view videos through hype, a library service, and first of all, I get a dialog box saying "Firefox prevented this site (tools.google.com) asking you to install the software on your computer. There is a button "allow." When I press on that, it seems to start the download, but then I get an error message saying "The Add - could not be downloaded due to a connection problem with Tools.Google.com".

  I could download the add-on (and see a video) in IE and the documentation on the add-on says it is supported in Firefox, but it is not in the library of Firefox Add-on, when I'm sailing there.

  Any ideas? I'd rather not have happen browsers when I want to use the hype.

  (And I just tried to do the steps below (with "Automatically add" troubleshooting information and basically the same thing has happened - except the Add source - it was different.)) I may have a few settings that says I want all new Add-ons?

  I was able to download and install the add-on after turning off the web shield in my Avast anti-virus successfully software. Thanks for your help!

• You please bring friendlieness user of Firefox 3?

  I can't use chrome and... expired my Firefox, Firefox 4 has been great but I think 3 was better. I remember all the hype surrounding its release, and it was amazing. I wish I had this back is because I do not see too well the screen and I am not computer savvy. This 29 Firefox is just like the chrome too tiny and relies on people who can navigate a bunch of small icons. He lost his complex simplicity. I tried the classic ad - on, however, to my dismay, it did not; He kept removing my URL. Please consider my proposal, I know you all have to apply to the young generation that can find the main menu in this mess of chrome-ism. But some of us have been with the web browser Mozilla before that Firefox has been a gleam in the eye of the developer. If nothing else, can I have a link to download old Firefox 3? Thank you for your time.

  You can set the layout.css.devPixelsPerPx pref on the topic: config page on 1.0 or Windows 8 to 1.25 and if necessary adjust layout.css.devPixelsPerPx from 1.0 to 0.1 or 0.05 steps (1.1 or 0.9) do the icons to display properly.

  • http://KB.mozillazine.org/about:config

  See also:

  • https://support.Mozilla.org/KB/Forum-response-zoom-feature-on-Firefox-22

  An extension allows you to adjust the size of the text in the user interface and zoom the page in the browser window.

  You can watch this extension to adjust the font size for the user interface.

  • Theme font & size changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/

  You can watch the Default FullZoom Level or NoScript extension if the web pages need to be adjusted after the change of layout.css.devPixelsPerPx.

  • Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
  • NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

  You can watch the classic extension theme restaurateur restore some features that has been lost with the arrival of the Australis style in Firefox 29.

  • Restorer of classic theme: https://addons.mozilla.org/firefox/addon/classicthemerestorer/
  • You can check the settings of the extension of the CTR through the Options/preferences button on the page "Firefox/tools > Modules > Extensions.
  • You can find additional toolbar buttons and additional toolbar settings in customize (Firefox 3-bar menu button > customize)

  See also:

  • https://support.Mozilla.org/KB/how-to-make-new-Firefox-look-like-old-Firefox
  • https://support.Mozilla.org/KB/common-questions-after-updating-to-new-Firefox
  • https://support.Mozilla.org/KB/learn-more-about-the-design-of-new-Firefox

• HP EliteBook 745 G3 HPE: win 10 Crash with Bluedump

  Hello

  I use HP EliteBook 745 G3 HPE, I enable virtualization in the BIOS and enable the hyper-v & hyper-v services in OS.

  After reboot start giving bluedump with the hundler error.

  After System Restore I able to connect to the operating system.

  can help what was wrong with my OS when I enable Hyper-v

  Thanks and greetings
  Mr. Sidibé Ganesh

  Hi all

  The problem is with the drivers on the underside components below.

  b57nd60a.sys - Broadcom NetXtreme gigabit network
  mfeaack.sys - McAfee Internet Security Suite
  mfehidk.sys - McAfee Antivirus

  After analysie the memory dump, I found that the drivers above are originally the blue battery error message enable the hyper-v feature in my laptop Business 64-bit Win10.

  I download the "automatically detect and install your driver" in the link below http://support.amd.com/en-us/download who helped to get the latest drivers depending on the hardware, which is installed in my laptop.

  Thank you.

  Simo gatera