Issue of Dell PS6100 replication and DR

Similar Questions

• Can someone help me? I have a dell windows vista and the cd/dvd drive won't work correctly. Whenever I have insert a cd/dvd, it takes forever to read, and it ejects itself. Why?

  Can someone help me? I have a dell windows vista and the cd/dvd drive won't work correctly. Whenever I have insert a cd/dvd, it takes forever to read, and it ejects itself. Why?

  Hello

  Detect and automatically fix problems of CD/DVD
  http://support.Dell.com/support/topics/global.aspx/support/DSN/document?c=us&l=en&s=Gen&docid=56A1F87CD8895B0EE040AE0AB7E15FFC

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Place of Dell 8 pro and Microsoft Wireless display adapter is no longer reflects the views.

  To the right,.

  I have a Dell 8 pro place and a Microsoft Wireless display adapter. The adapter works perfectly and I can mirror the views. Then reset my place of Dell 8 pro and reconnected and now he wants to extend only. I even tried to reset the graphics card but without success.

  How can I mirror back on my place of dell 8 pro and Microsoft Wireless display adapter?

  Bobby Burgess

  I worked on this issue for hours.  And the answer is: there is an update to one of the drivers DV8P, the driver of the Intel platform, bringing the clone feature.  Available through Dell for the DV8P and the direct link below product support page.

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=3VR67&

  Hours, I tell you.

• I have a Dell Inspiron N4110 and it says im connected to the internet, but I can't actually open things, what should I do?

  I have a Dell Inspiron N4110 and it tells me im connected to the inernet but I can't go online and for some programs, like steam for example, says that I have to connect to the internet. the only thing that I can open is Windows 64 bit, but I can't really do anything. When I try to do a syestem restore it tells me disk error C. Then I do a check disk. but that tells me error and do a system restore. Please help me boy Im only A 14 year HELP!

  -Thank you

  Cam

  Hello Cam,

  Welcome to the Microsoft community.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  ·         What is the exact error message you get on the computer?

  ·         Were there any changes made on the computer before the show?

  Follow these methods and check if that helps:

  Method 1:

  Step 1:

  Check if you have the similar problem in safe mode with network, otherwise you can try to put your computer to a State of clean boot in normal mode and check if it works:

  Start your computer in safe mode with networking

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Step 2:

  Follow the article to perform the clean boot on the computer:

  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/929135

  Warning: After using the boot is a way to solve your problem step 3 follow-up to reset the computer to start as usual.

  Method 2:

  I suggest you to optimize Windows 7 for better performance and check if it helps

  Optimize Windows 7 for better performance

  http://Windows.Microsoft.com/en-in/Windows7/optimize-Windows-7-for-better-performance

  Please follow all the steps and if the problem persists, return back and we will be happy to help you.

• vSphere replication and RDM

  Hello

  I have a site that I put in place which has Windows 2012 R2 invited with RDM in physical compatibility mode.  When I go through the wizard of replication vSphere for these servers I can configure replication for the comments and as expected I can not set up for the RDM (which is fine, I have those covered by the SRA) but on the last stage it errors with the following:

  Configure a virtual machine for replication

  VRM Server runtime error. Please check the

  documentation for troubleshooting information. The

  detailed exception: "HMS can't put disc UUID for"

  VM disks: ManagedObjectReference: type =

  VirtualMachine, vm-34 = value, serverGuid is C5ABE757 -.

  9697-4C6A-A36B-F98F72EFB5GG'.

  Contoso\tdaley

  VC1.contoso.com

  02/09/2014 14:49:40

  02/09/2014 14:49:40

  02/09/2014 14:49:41

  Is it not possible to ignore the RDM or is not my problem?

  Thank you

  Thom

  Physical RDM mode is not supported by vSphere replication and there is a known issue, you cannot configure replication for VM with RDM physical mode even if you exclude this record of replication.

  Check the release notes: VMware vSphere replication 5.5.1 Release Notes

  Cannot configure a virtual machine with disc RDM in physical mode even if the disk is excluded from replication.

  If you configure a replication of a virtual machine with the physical mode, the following error message may appear:

  VRM Server generic error. Check the documentation for any troubleshooting information. The detailed exception is: HMS can not set disk UUID for disks of VM : MoRef: type = VirtualMachine, value = , serverGuid = null'.
  

  Workaround: No.

• Screen resolution signal with Dell E7450 processor and controller. Help!

  Hi All-

  We have some Captivate users who have just received of new computers, touchscreen Dell E7450 processor and controller with WIN8.1 installed.

  We are current users of Captivate 8.

  The issue we encountered is that when attempting to capture using our preferences, screens change resolutions on us.

  Here is what happens...

  1. Changes to the user to screen resolution 1024 x 768 (applys and accepts the change)
  2. Selects to monitor 1, full-screen capture
  3. To start recording; registration ends

  When you look at capturing what we see is that the captured images do not show that 1024 x 768. There are large black borders on one or two sides, and the program that we are captures show left or right raised in a corner.

  When we check the properties, this also shows that the captured resolution isn't what we put on the screen (and still shows). It shows, he changed to 1280 x 960.

  Has anyone else had an experience like that, and if so, how have you solved this.

  We have tried several options, including moving at different resolutions, changing the screen capture to capture the application (which shows the current window too small to see the app), so the addition of an external monitor to see if a capture would work to form it. Nothing seems to work that we can think.

  Any thoughts or resolutions to try would be appreciated that we must make our developers back from work.

  Thanks in advance!

  We managed to find a solution to this problem thanks to Rick Stone...

  The PPP should be set to 100%

  apparently the default dpi has been set at 150% if once we have reset all worked as expected.

• If I have a windows vista dell optiplex 760 and 755 and when I reload with windows 7 can't me activation that is legal?

  If I have a windows vista dell optiplex 760 and 755 and when I reload with windows 7 can't me activation that is legal?

  "carlostorresWG" wrote in the new message: * e-mail address is removed from the privacy * _vista...

  If I have a windows vista dell optiplex 760 and 755 and when I reload with windows 7 can't me activation that is legal?

   

  If the machine came originally with Vista, and you charged it with Win 7 disc by the same manufacturer, it will go into a grace period and the non-genuine end - the key used for this installation requires data appropriate to the SLIC table in BIOS in order to activate it.

• I have re-installed Windows Vista on my laptop (Dell Inspiron 1525) and now my wireless does not work.

  Hi, I have re-installed Windows Vista on my laptop (dell insparon) 1525 and now my wireless does not work. ive tried re installing driver, but it says operating system not supported. I used the disc that came with the computer of the re install and I even tried to install service pack 1. .

  original title: Wireless problems after install.

  I just tried both, the dell is one that says OS not supported"and the intel, it went very well, but my 'network controller' still have a yellow top thing in Device Manager. and I always wireless. any other ideas? Thank you for the help

  Question...  You have whatever it is listed in the "Network adapters" section of "Device Manager" now?

  While ensuring that the exclamation point is not for your wired network device (plausible) or bluetooth (plausible) and you just need to configure your wireless network to connect to * your * wireless network now.

  You may have to contact Dell to see why none of their drivers receive your wireless device works on the original operating system, what they included.  This could be a hardware problem PURE.

• I have a dell inspiron 1720 and in the windows Mobility Center that turning wireless on is grayed out.

  I have a dell inspiron 1720 and in the windows Mobility Center that turning wireless on is grayed out. It works very well for four years and all the time he was arrested. What should I do about it?

  Hi Scott,.

  You did it all change hardware or software on your computer before this problem?

  You can follow this link & check if it helps:

  Windows wireless and wired network connection problems

  
  Reference:  troubleshooting problems with wireless networks

  Hope the helps of information.
  Please post back and we do know.

• I use Vista Home Premium on a laptop Dell 1545 Inspiron and Dell 968AIO wireless printer. I can't print the attachments of email but I can print several pages on the internet.

  I use Vista Home Premium on a laptop Dell 1545 Inspiron and Dell 968AIO wireless printer. I can't print the attachments of email but I can print several pages on the internet. I updated drivers and tried everything that other people have told me to try on other forums to the best of my abilities. I'm not otherwise qualified in computer science. Also, I will mention this all started when I restored my computer laptop back to factory settings. I did it because that's all I could think about. As far as coming back on my laptop, he did do the trick. Thus, suggestions, thoughts will be appreciated.

  Thank you

  Jim

  Lima, Ohio

  original title: unable to print attachments from Windows Mail

  Hello

  The print job goes to the queue?

  Method 1:
  I suggest you through the Windows 7 steps in this document.

  Method 2:
  Alternatively, you can try to plug in the printer and the laptop to see if it makes a difference.

• Whenever I start my computer it will go to Dell Media Direct and will not bring me to my profile

  Whenever I start my computer, it will go to Dell Media Direct and will not bring me to my profile. I will follow the direction it tells me to do, but it does not work.

  These are the directions that he told me to do

  1. Dell Media Direct output
  2. Press the power button

  Then when I do this

  1. It is said to be taken from the windows and dates back to Dell Media Direct

  http://support.Dell.com/

  Dell support at the link above.

  http://en.community.Dell.com/support-forums/default.aspx

  Dell's Support Forums at the link above.

  Try the Dell Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Difference between Dell Powerconnect N4032F and 8132F

  Hello!

  In the last days, the Dell PowerConnect 8100 disappeared from the Dell Web site and now, the M4000 series with the same characteristics are presented.

  It's just a change of name or these devices differ in some way? The M4000 firmwares is usable on 8100 switches in the future?

  Thank you

  Kind regards

  Stril

  Dell PowerConnect N4000 switches series both Dell Networking PC8100 series share the same version of the firmware of the image (for example, N4000v6.1.0.1.stk). The Dell Networking N4000 series switches can be stacked with switches Dell Networking PC8100 of the series with any battery necessary for the performance of 6.0.0.8 or later firmware (6.1.0.1). Dell Networking PC8100 switches can support the firmware both 5.x and 6.x versions, but Dell Networking N4000 can support only the 6.0.0.8 and later versions of firmware (6.1.0.1)

  I hope this helps.

  B

• What is the Dell's Vision and Mission statements

  Hello

  I searched our intranet trying to find the Dell's Mission and Vision statements and cannot locate.  My colleagues not can find them as well.  Where can we find this information?

  It is worded a little differently, but it's the same thing.

  http://www.Dell.com/learn/us/en/uscorp1/purpose-and-values

• Dell Precision 390 and Windows 7 64 bit driver support

  We have a Dell Precision 390 and want to pass this to a Windows 7 64-bit operating system.  Several months ago, I noticed driver support for Windows 7 64-bit for the Dell Precision 390 model but pilot at the moment the site and downloads not support all these drivers for Windows 7.  It seems that the support has been removed.  At best, it supports only Windows Vista 64-bit.  Can someone explain why there is no support driver for Dell Precision 390 for the 64-bit Windows 7 platform?

  Tony

  I have a Dell Precision 390 and Windows 7 Ultimate 64 - bit loaded just fine and it is running.

  It is strongly suggested that you do a clean install.

  So I wiped my HD (after backing up personal files). Don't come to format your drive, I mean totally wipe it.

  Automatic updates will install the drivers you need for any connected device or visit the manufacturers for your drivers.

  So in short, "Don't sweat it".

  Go ahead and download this puppy goes for a few years.

• Windows 8: Dell Back Up and restore

  Yesterday, the dialogue appeared on my screen asking if I wanted to download Dell Back Up and restore.

  I downloaded this, but at the end of the download, more dialog appears, saying that the first 30 days are free.

  When I downloaded the software, I had the impression that he was totally free.

  When I bought my Dell desktop computer, I gave my card details. After using the software, as detailed above, 30 days will be charged on my card? Or if I cancel my request for use of the software before the 30 day period, could I find myself money Dell?

  Hi Donny99,

  The program Dell Back Up and restore basic version is available free of charge. This version allows you to perform backups and recoveries of your data, but the storage would be your responsibility.

  A Premium version is available, which charges a small fee for the storage of data, continuous backups and store your data on cloud servers.  This type of storage would be beneficial in the case of a destruction of the catastropic of your local storage space. IE: fire, flood, incident linked to severe weather and well worth the small price if you have sensitive or valuable data.

  Here a video explaining how it works.

  In addition, the credit card number you gave at the command of your computer is not registered anywhere.  You will need to re-enter your card details to pay for the Premium version of the software DBAR.

  Hope that this helps, if you have any other questions, feel free to private Message me.  Thank you.

  Kind regards
  Robert