Hyper-V server multiple DRC

Similar Questions

• What is the difference between containers and hyper-v server windows?

  Hello

  What is the difference between containers and hyper-v server windows?

  Thank you

  http://windowsitpro.com/Windows-Server-2016/differences-between-Windows-containers-and-hyper-v-containers-Windows-Server-201

  PS: Where's your homework due?

• Dblink Oracle to sql server, multiple database on the same server sql under a dblink

  Hi, we managed to set up an Oracle dblink to sql server and retrieve data.

  The user of sql server have been using via dblink has access to multiple databases on the same sql server

  But the question is how in oracle (if possible) prepend you the SQL access to this?

  For example:

  Sqlserver_prod has the user sqlserver_user which seems to be set up as default database sqlserver_db1

  But we have select access to sqlserver_db2

  all work well as sqlserver_user

  Select * from table_fromdb1

  Select * from dbo.table_fromdb1

  Select * from sqlserver_db1.dbo.table_fromdb1

  as does

  Select * from sqlserver_db2.dbo.table_fromdb2

  more in Oracle

  Oracle_db a dblink sqlserver_prod. World connection sqlserver_user

  everything works fine

  Select * from 'table_fromdb1"@sqlserver_prod '.

  Select * from 'dbo '. "table_fromdb1"@sqlserver_prod

  But how to (if possible) access from oracle

  sqlserver_db2.dbo.table_fromdb2

  without having to create a new sqlserver_db2_user referenced in a new dblink

  If oracle for oracle would be

  Select * from remote_oracle_schema.table@remote_oracle_db

  Hello

  You cannot select a table in a different SQL * database server from that to which the gateway instance connects.
  As stated in the documentation-

  Oracle® database gateway

  Installation and Configuration Guide

  11g Release 2 (11.2) for AIX 5 L Based Systems (64-bit), HP - UX

  Itanium, Solaris (SPARC 64-Bit), Linux x 86 operating system,

  and Linux x 86-64

  In the section.

  The example SQL Server multiple databases: Configuration of the modem router

  A separate instance of the gateway that is required for each SQL Server database. Each

  instance needs its own Gateway system ID (SID).

  ==========

  You will need to create a new instance of the gateway for the SQL * Server DB2 as well as a link separate db.

  Kind regards

  Mike

• VMware ESXi 5.1 can run Microsoft Hyper-V Server 2012 SMV also, nice!

  I created a detailed instructions (with screenshots and video) using GA-level code here:

  http://tinkertry.com/ESXi-5-1-running-hyper-v-Server-2012

  using the "basic" version of the new Hyper-V, with tips and ideas from these forums and other sites on the previous beta tests.

  Here's the gist:

  • Create a "Microsoft Windows Server 2012 (64-bit)" VM, using the default Configuration
  • Right click on the new virtual machine and material virtual upgrade to Version 9
  • twist the VMX, adding these 4 lines:

  MCE. Enable = TRUE

  Hypervisor.CPUID.v0 = FALSE
  featMask.vm.hv.capable = Min:1″ «»
  VHV.enable = TRUE

  • Remember, it is assigned to a network where the vSwitch is Promiscuous Mode to Accept
  • Turn on the new machine virtual of Hyper-V
  • perform the default installation and configure Hyper-v, hard IP-code if you wish, create an Admin user and password name that matches a customer's system
  • create a Windows 8 'customer' VM, as the Hyper-V Manager takes just a few seconds to add
  • Difficulty of COM security on the client system
  • use Hyper - V Manager this virtual machine to connect to Hyper-V, and then...
  • create a Hyper-V hosted Virtual Machine, can connect you and turn it on to test

  I'm looking forward to suggestions or alternative methods, but for the moment, it was the only way I could get it to work in my own laboratory, thought that others might not want to try to replicate this exercise.

  Windows Hyper-V (not supported) is a selection of OS comments available through the user interface in Workstation 9.  It defines the guestOS to 'winhyperv '.  Although the selection of the BONES of Hyper-V is not available through the user interface of 5.1 ESXi, I understand that support it is always there.

• Hyper-V Server R2 of 2012 on Dell R510 - how to check RAID health?

  Hello, guys!

  I have Poweredge R510 with Hyper-V Server R2 2012 as host operating system. I suspect the material problems and I need to check the consistency of the disc. What software can I use with Hyper-V Server? You will need to check the RAID health. When you start the server I see no error in the Configuration of SAS utility.

  In the event log, I see:

  11 event ID driver has detected an error of the controller on \Device\RaidPort0.

  EventID 153 operation the e/s to 2 b 0 address of the logical block to disk 0 (the PDO name: \Device\0000003f) was retried.

  Thank you!

  You can run OpenManage on the host.  Page 59 of this link gives you a guide:

  FTP://FTP.Dell.com/manuals/all-products/esuprt_software/esuprt_ent_sys_mgmt/esuprt_ent_sys_mgmt_opnmng_sw/Dell-opnmang-Srvr-Admin-v7.3_User ' s%20Guide3_en-us.pdf

  Kind regards

• PowerEdge R610 add hard drives to Hyper-V Server 2008 r2 PERC6i

  I have:

  PowerEdge R610 PERC 6i

  3 x 146 GB SAS RAID 5

  OS: Hyper-v Server 2008 r2

  I just added three more 146 GB SAS drives

  How to expand the RAID 5 from there?

  I was reading up on managing open but have not seen a clear passage until you get it the best way to operate.  Thanks in advance.

  In OMSA, go to storage, PERC, virtual disks and select Reconfigure in the drop-down list of tasks available for your RAID 5.  It will start a wizard, through the addition of the new drives in your RAID 5.

  Physical disks must show as the first LOAN (if the display of Foreign Affairs, which must be cleared before you can do anything - storage, PERC, Information/Configuration, foreign/erase in the menu drop-down for the controller).

• P2V-Hyper - V Server 2003 license

  We want to test P2V of a file server, but not actually to use the virtual copy of the Server 2003 file in production.  I finished the P2V and the server is now in Hyper-V, but when I restart him and try to connect, he wants me to reactivate the license server, if I do it will be the origin server (physical server active still in production) stop working or reveals the key is no longer valid? If so, is there a way to circumvent this problem, because we have not both upwards at the same time in the production?

  Thanks - John

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Live migration of HYPER-V Server R2 2012

  Hello

  I have a new Hyper-V 2 built node cluster. Storage is presented through SAN. Live-Migration network, network Public, private network and virtual switches-2 VMS-MGMT. These boxes are hardware identical; HP DL580 G7 with a lot of horses. I am running Windows Server 2012 R2 Datacenter Core on each node. My problem is, I validate cluster, and I get no error at all. This is a brand new clean install, but for some reason any I can only migrate from one node to another and not return without having to reboot a node after live migration. I don't know what I'm going? Has anyone already experienced this? A peer of mine installed the same scenario in a different data center and it does exactly the same thing too. Which leaves me to believe it's OS or hardware related?

  Any help will be greatly appreciated!

  Thank you!

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• The Group PS6100XS and Hyper-V Server 2012: migration of storage between LUNS corrupts VM

  Well, I'm puzzled! Summer hit my head against this whole week. Basically, ranging from a virtual machine clustered LUN on the Bay EqualLogic corrupts the virtual machine. Here is my configuration:

  1. SAN 1: PS6100XS 6.0.1 firmware, 2 LUNS configured as CSV, 1 as a quorum disk
  2. SAN 2: FreeNAS 8.3.0, 2 LUN (ZFS-formatted, for what it's worth)
  3. Server 1: Dell R310 running Windows Server 2012 with Hyper-V installed feature. 4 network cards: 2 made team for traffic LAN, 2 for iSCSI with HIT KIT 4.5 configured for MPIO.
  4. Server 2: Old box SuperMicro running Windows Server 2012 with Hyper-V feature installed. 2 network cards: 1 for LAN traffic, 1 for iSCSI with HIT KIT 4.5 installed
  5. Created and all cluster validation tests passed
  Here's what works:
  1. Ranging from a virtual machine of the LUN if there is no activity on the VHDX
  2. Move a VM all LUN the EqualLogic to any number of unit logic FreeNAS or vice versa
  3. Move a VM between LUNS on the FreeNAS
  4. Move a VM between LUNS on the EqualLogic BEFORE I created the cluster (just using Hyper-V Manager, not the Failover Cluster Manager)

  This is what kills the VM whenever:

  1. Create a virtual machine through the Failover Cluster Manager - is not matter which node owns the storage or the VM - tried all combinations
  2. Take an active virtual machine, power and move a LUN EqualLogic to another EqualLogic LUN. The move signals the success, but the VM blue screen at the end of the move will and will no longer be able to start. It's basically fried.

  BTW, I tried also to disable one of the iSCSI NIC on the R310 - what does not help either. Any ideas? I have a case goes with the support of Dell EqualLogic, but so far they have been puzzled. Anyone got something like this works yet?

  OK, after Dell tried about 5 different times to tell me that my setup was not supported (actually claimed that EPA software was not supported!) I finally got someone who gave me workaround: disabling ODX by changing the key "reg" HKLM\SYSTEM\CurrentControlSet\Control\FileSystem\FilterSupportedFeaturesMode from 0 to 1. This "fix", but it also takes one of the most interesting features of the 2012 Server + EqualLogic: ODX! With active ODX, I can move 20 GB in< 1="" sec.="" with="" it="" disabled,="" it="" takes="" around="" 2="" minutes,="" depending="" on="" network="">

• Oracle import server - multiple Page Images are not imported.

  Dear all,

  
  We use the Oracle Document Capture 10.1.3.5.1 version.  Also when we use the import to import file server to the server for recognition.
  Although we have Images with several pages where barcoded invoice number is on the first page, when import us the file by using import server only the first page (with bar code) is
  were imported. Other pages in the image file are ignored import server.
  

  Y at - it a setting to adjust in the import server? Thanks in advance.

  This has been fixed in the Patch: 14538406

  Note.1278771.1 - import server 10.1351 imports only the first Page of multiple Tif file. No error returned

• Doubt on single server multiple vs single-server instances several databases

  Hello

  Here is my banner for oracle:

  Oracle banner:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production

  PL/SQL Release 11.2.0.1.0 - Production

  "CORE 11.2.0.1.0 Production."

  AMT for 64-bit Windows: Version 11.2.0.1.0 - Production

  NLSRTL Version 11.2.0.1.0 - Production

  When you use the dbca command, it creates a new database. So is it possible to have multiple databases at the same time running on the same server?

  I tried this option where I had created 2 databases A and B both running.
  

  He kept to launch ' ORA-12520: TNS:listener could not find a Manager is available for the type of requested server "intermittently. I have not found any useful document to solve this because of which I ended up recreate all objects in database B to the database A. Data Base A therefore has its own schemas and schemas from database B.

  Below are examples of files tnsnames.ora and listener.ora, sqlnet.ora trying this option:

  
  

  sample tnsnames.ora file.
  

  A =.

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = abc.com) (PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = A)

  )

  )

  B =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = abc.com) (PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = B)

  )

  )

  Listener.ora, example:

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = abc.com) (PORT = 1521))

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

  )

  )

  ADR_BASE_LISTENER = C:\OracleDatabase

  SQL Net.ora:

  NAMES. DIRECTORY_PATH = (TNSNAMES, EZCONNECT)

  ADR_BASE = C:\OracleDatabase

  Lsnrctl status showed services for each database.

  All the world is facing this problem? Can we have multiple databases on a server with a listener running on the same computer? So my Tnsnames.ora file would have 2 strings of connections and file listener with an entry of the listener.

  Can you please share your tnsnames.ora and listener.ora files?

  Also, how to create a single database with multiple instances on the same server? Please tell me about the document that contains an example of this.

  Yes, you can have several databases (running different ORACLE_SIDs) the ORACLE_HOME even on a single server.

  I suspect that the ORA-12520 error was the result of certain constraints of resources (cpu, memory or i/o) resulting in the inability to create a new database session.

  Hemant K Collette

• How to activate the Hyper-V Server 2012 on Fusion 5?

  Dear members of the Forum,

  I have a Mac Pro early 2008 Intel Xeon, 16 GB under Snow Leopard and VMWare Fusion 5 installed, as well as a few virtual machines running perfectly. I decided to create a virtual computer that is running Windows Server 2012. The installation went well. However, when I tried to activate the Hyper-V technology I got in trouble.

  In the Virtual Machine settings > system settings > general: I chose "Hyper-V (not supported).

  In the processor and memory, I selected 4 cores, 4 GB and in advanced: enable applications to hypervisor...

  In other/advanced: the virtualization engine preferred: Intel VT - x with EFA

  and all the possible permutations of these selections. Nothing has worked.

  Error messages:

  Hyper-V cannot be installed. The processor has no virtualization required capabilities.

  Virtualized Intel VT-x/EPT is not supported on this platform.

  Preferred mode is unavailable. Using VT - x instead. This host does not support EFA.

  All this leads me to believe that my hardware configuration does not support the operation of computers virtual hyper-v in Fusion. According to your philosophy, we can consider this to be a reality: everything is always possible. However, what drives me nuts are guys on internet blogs, everybody saying he's working on their system! I would like to hear an authoritative voice if possible, or not.

  Thanks in advance

  EP

  Hi Eric and welcome on VMware communities!

  It is purely a matter of features of the CPU.  None of the processors that apple delivered in Early 2008 Mac Pro systems supports Extended Page Tables (EPT).  According to the list of the Mac Pro systems, the processor that you have will be E5462, E5472 or X 5482, as well as relevant on the (related) Intel Web site pages show no support for EFA everymac.com.

  Without EFA, we cannot virtualize VT - x.  In other words, the guest operating system cannot see and use virtualization assisted by material, although the merger itself will be able to make use of the hardware support of the functions of virtualization host to run the virtual machine: we can use VT - x, but cannot virtualize to make it available to a nested prompt.

  Hyper-V is entirely dependent on the hardware support for virtualization (VT - x for example), then it won't work as a guest nested in your configuration.

  Companions VMwarian jmattson produced a great entry on nested VMS requirements and functional combinations here: nested VMs running

  See you soon,.

  --

  Darius

• WIN8 Beta Hyper-V server on a virtual computer crashes

  I am trying to execute that WIN8 Server Hyper-V nested in a virtual machine. In Developer Preview, it works fine. With the new beta version, it crashes on startup after installation of Hyper-V.

  Please fix?

  Best regards

  Henrik

  Try to add this option to your virtual machine configuration file:

  MCE. Enable = TRUE

• Cisco VCS Lync Interworking with Lync Server/multiple domains

  Unfortunately I don't find any reference in the guides of deploymend, if it is possible to master several server/domains on a single VCSE lync. Is there a way to gather environments different lync with a vcs? For example, interoperability with clients a and b, which have completely separated from lync environments.

  We wanted to master it with VCSE, or is the Microsoft key option only avalible for VCS?

  Thanks for the reply.

  The Deployment Guide says you should use a VCS-control, not a VCS-Highway to serve as gateway of Lync.

  I don't think I have several B2BUAs connect to Lync on a single VCS - you would need to have a separate VCS for each Lync environment (IE, one for the customer) and another for client B and search rules appropriate to direct traffic areas in the right direction.

• Print server multiple on a single instance of the Apex

  Hello!
  I find no particular reason why an instance of Apex (4.1) only has a definition of print (FOP or BI) Server?
  
  In many cases, I prefer to use Apache Cacoon and in some cases Birt/Jasper reporting solution (ready made reports).
  Am I missing something?
  RG,
  Damir Vadas

  Hello

  You configure a server in the instance settings.
  You then use the report attributes Print Print Server overwrites the value different server for specific reports.
  http://docs.Oracle.com/CD/E23903_01/doc/doc.41/e21674/bldapp_rpt.htm#sthref1392

  Kind regards
  Jari

  http://dbswh.webhop.NET/dbswh/f?p=blog:Home