Cisco VCS Lync Interworking with Lync Server/multiple domains

Similar Questions

• ACS 4.1 supported with Windows Server 2012 domain controller

  I put to level my domain controller / Active Directory from Windows Server 2003 to Windows Server 2012.

  In my environment, I use Cisco ACS 4.1 that is built into Windows Server 2003 Active Directory.

  ACS4.1 will be working perfectly with my new domain controller (Windows server 2012) or I need to improve my ACS too?

  Kind regards

  Junaid

  ACS 4.1 does not support the 2012 server that you should update

• Cisco VCS X6.1 and MS Lync 2010 over TLS

  Hi all!

  I have a problem of integration CiscoVCS (X6.1) and Lync 2010.

  I couldn't configure control VCS to Lync connection over TLS, but I've done with TCP.

  If I try to TLS, there is detail = "bad packet length", event = 'Outbound TLS negotiation Error' records in the control of VCS event log.

  The VCS and Lync certificates are of the same CA approved with their FQDNs as object names and the VCS and complete Lync with EDCS are in the DNS system. Of course, VCS and complete Lync, what subjects of certificates, used in VCS approved area and host of destination trust app Lync.

  Calls for VCS is the intellectual property of the EFF Lync. We use no HLB and administration. Also, VCS is autonomous, without any load balancers or clustering.

  Lync signaling is done, but as I see it, VCS cannot send the data back.

  Lync is on Server 2008 R2 x 64

  Thanks for your suggestions!

  In reflection of the c20 position, what image software do you run on the VCS?

  with:

  s42700x6_1_0.tar.gz     21-Apr-2011 12:39  266M
  
  or without:
  
  s42701x6_1_0.tar.gz     21-Apr-2011 12:43  266M
  

  encryption?
  
  

• I configure to do mediation Lync server send INVITATION with parameter URI Conference and isfocus?

  I have the standard edition Lync Server 2013 with mediation server had TO connect via sip trunk; and I also have 2 Lync 2010 Client.

  First of all, Lync Client A calls B Lync Client and call in place.

  Seconds, participant to invite Lync Client B (call 861002 for a sip phone that connects to the DUT)

  The conference call itself has no problem, everything is fine except that:

  The mediation server PROMPT message to the DUT has NO Conference URI or the isfocus parameter in the Contact header field.

  There will be some configuration that I missed. Please help me solve this problem.

  Thanks in advance.

  Johnny

  Hello

  Post your question in the Forums of Lync server: http://social.technet.microsoft.com/forums/en-us/category/lync/

  Thank you.

• I wish I had a client on my PC to communicate with the Lync server, but it does not work.

  Evaluation of the VHD Lync 2010 program

  I'm quite new to Lync and I'm trying to understand how it all works. I downloaded the virtual computer files and got successfully throughout the environment, but now, I would like to have a client on my PC to communicate with the Lync server but I'm not having any luck.

  Here are the servers that I have:

  DC

  Exum

  Lync-Qms

  Lync-Se

  SPS2010

  These are all in an internal network and I gave the Lync-SE server outside access, assuming that it's the server that my client needs to communicate with because he runs the Lync server. Initially, I was getting a certificate error. I exported the certificate of the server DC, installed on my client and the client toward the DC server who gave me the certificate number, but now I get an error that the server is temporarily unavailable. I'm far from base here?

  Hello

  Thank you for visiting the Microsoft answers community site. Your question is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 Server forum.

  http://social.technet.Microsoft.com/forums/en-us/category/OCs

  I hope this helps.

• CUCM v8.5 with 3 SIP Trunks to the Lync Server - Route algorithm of Distribution for the Group

  I CUCM connected to three different Lync server via 3 different SIP trunks.

  RG is composed of the following elements:

  LYNC SIP TRUNK 1 (1.1.1.1)

  LYNC SIP TRUNK 2 (2.2.2.2)

  LYNC SIP TRUNK 3 (3.3.3.3)

  The route group was built with "Top Down" the algorithm of distribution. The first SIP trunk knows congestion and some calls are never routed to secondary and tertiary SIP trunks.

  Based on all the forum posts I've seen - it seems that I have to configure the algorithm of group distribution of ranges as 'circular '.

  If I change the algorithm group of "Circular" lines - can I expect the following results:

  1. first call will go through LYNC SIP TRUNK 1

  2. second call will cross LYNC SIP TRUNK 2

  3. third call will cross LYNC SIP TRUNK 3

  When I change the algorithm of distribution of the route to the 'circular' group and click 'SAVE', I am invited on "RESET".  This service assigns to the existing calls through SIP Trunks?

  TIA,

  Amir

  Hello

  the circular algorithm will work the way you mentioned, but I suggest to try and make sure that is not perform integration

  to reset the SIP trunk actually active calls should not be made because the gose media directly between endpoint unles syou use something like trust rely wher evous enforce calls to go to the SIP

  Therefore, in most cases is should be fine just try configuration at the time of the calls will face service disruption

  hope this helps

• MS VirtualLab Lync Server 2010 does not. error code 1. tested from multiple PCs. What is the problem?

  Hello
   
  While trying to start wirtual lab I received the following error:
   
  There was an error in the environment of virtual laboratory of construction. Try again or contact support support if the problem persists. Error code: 1. status: failed
   
  I tried to run the laboratories of different pc and got the same error each time.
   
  Please specify what is the problem?
   
  Yesterday, I used these labs without all the problems.
   
  I added the site in the zone of confidence. also all of the custom software add-ons necessary have been installed.
   
  Thanks in advance.

  Hi AndriiKyianov,

  Thanks for posting your question in the Microsoft answers Forum. Your question about Lync Server 2010 it will be better answered by experts in the Lync Server Forums. Please repost your question here.

• Setup search rule of venture capital to Lync Server

  Hi Experts,

  I'm still learning on how to implement rules research on the RESUME. However, currently, I make the VCS with Lync Server integration.

  The installer is: -.

  1. transport server) edge

  2. end of Sling pool)

  (3.) what a single control VCs running X7.1

  Network video SIP domain of my client configured on VCS's [email protected] / * / and it is the same for the field of Lync here.

  Video endpoints and lync so same domain clients.

  I'm confused about how I would install search rule on the RESUME that will target the Lync server. (I'm following VCS-Lync Deployment Guide) when the domain is same.

  Could you please help me, how the rule search would look like?

  Thank you

  Saurabh

  check an additional link for this...

  https://supportforums.Cisco.com/message/3586039#3586039

  a nice thread where Andreas eliminated many things...

  Thank you

  Alok

• The band multiple @domaine used in user name on the integration of commercials with Cisco ISE?

  Hello

  How to remove multiple domain suffixes through ISE with AD user name used as an external identity Source. Username is used in [email protected] / * / format.

  Cisco ISE 1.2 patch introduced 4 Strip prefix or suffix @domaine Kingdom of the username through ISE with AD used as external identity Source. But the documentation is not updated for this feature. I am able to band 1 domain successfully suffix but following conditions listed in the list of suffixes fails to get stripped.

  Any thoughts on the same.

  Thanks Kumar

  In the ISE under Administration > identity management > external identity Sources

  Choose the Active Directory on the left, select your ad server and Advanced settings

  Under identity band of suffix, make sure prefixes band below: is selected (I know, it says prefix).

  In the list of Suffixes box, enter your list of domain suffixes to undress.  The separator character is a comma (,).

  

  If this does not solve your problem, then I fear that a call to TAC may be in order.

  UPDATE *.

  Spaces are significant characters.  The registration of domains, so as such:

  @domain.com, @domain.local, @testdomain.com

  END UPDATE *.

  Please rate useful messages and mark this question as answered if, in fact, does that answer your question.  Otherwise, feel free to post additional questions.

  Charles Moreton

  Post edited by: Charles Moreton

• Ask to install or assign the certificate on the 2013 Lync Server default

  Hi, I'm in the middle of installing Lync Server 2013 and is stuck on the process "Request, install or assign the certificate on the Lync Server default 2013". Whenever I get this error...
   
  > Assign the certificate
  Game-CSCertificate-Type by default, WebServicesInternal, WebServicesExternal-A872BC92C77A1BF921085E54333C820AFA8A3AE7 footprint - confirm: $false - report "C:\Users\administrator. LOCAL\AppData\Local\Temp\1\Set-CSCertificate-[2013_07_13][21_58_52].html ".
  WARNING: The 'A872BC92C77A1BF921085E54333C820AFA8A3AE7' certificate has an expiration more than five years in the future.
  WARNING: The name of the subject of the certificate "WMSvc-MSLYNC" does not match the name of FQDN full computer (FQDN) "mslync.local.lab".
  ATTENTION: Other object names "' certificate 'A872BC92C77A1BF921085E54333C820AFA8A3AE7' do not contain the names of calculated replacement 'mslync.local.lab, dialin.local.lab, meet.local.lab, admin.local.lab, LyncdiscoverInternal.local.lab, Lyncdiscover.local.lab.
  The following certificate was awarded for the type "Default":
  Default: A872BC92C77A1BF921085E54333C820AFA8A3AE7 WMSvc - MSLYNC 08/07/2023 CN = WMSvc-MSLYNC 61F3BE44FA5E45BD4547A73F8057D533
  The following certificate was awarded for the type "WebServicesInternal":
  WebServicesInternal: A872BC92C77A1BF921085E54333C820AFA8A3AE7 WMSvc-MSLYNC 08/07/2023 CN = WMSvc-MSLYNC 61F3BE44FA5E45BD4547A73F8057D533
  The following certificate was awarded for the type "WebServicesExternal":
  WebServicesExternal: A872BC92C77A1BF921085E54333C820AFA8A3AE7 WMSvc-MSLYNC 08/07/2023 CN = WMSvc-MSLYNC 61F3BE44FA5E45BD4547A73F8057D533
  ATTENTION: The "Set-CSCertificate" treatment completed with warnings. '3' warnings were recorded during this execution.
  WARNING: The detailed results are "C:\Users\administrator. LOCAL\AppData\Local\Temp\1\Set-CSCertificate-[2013_07_13][21_58_52].html ".

  Hi Kumarajit,

   
  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
  http://social.technet.Microsoft.com/forums/Lync/en-us/home?category=Lync
  Hope this information helps.

• I change the ip address on the Exchange, share point and lync server other than the old serise

  How can I change the new series of IP on share point server lync, exchange server

  Hello

  Your question is addressed in the community forums.

  Try TechNet:

  TechNet Forums Home (view all) http://social.technet.microsoft.com/Forums/en-us/home

  Exchange Server http://social.technet.microsoft.com/Forums/exchange/en-US/home?category=exchangeserver

  SharePoint http://social.technet.microsoft.com/Forums/sharepoint/en-US/home?category=sharepoint

  Lync http://social.technet.microsoft.com/Forums/lync/en-US/home?category=ocs

  Lync Server http://social.technet.microsoft.com/Forums/lync/en-US/home?category=lync

  Don

• The IOM for Microsoft Lync Server Connector

  Experts,
  
  Do we not have any connector IOM for Microsoft Lync Server (previously Microsoft Office Communications Server)?
  If this is not the case, how can integrate us to IOM for provisioning of users?
  
  Please suggest.
  
  Thank you
  S M.

  Hello

  Oracle isn't connector Lync. You can install the connectors Exchange/AD 11.x and after AD/Exch commissioning, you can write a task to run your custom shell of power which can define lync attributes in AD/Exchange.

  I hope this helps.

  Concerning
  Suren

• Vcs Tandberg and Cisco VCS control

  Hello

  I have a client with an old would invest video and new servers.

  Old video servers

  Control system Tandberg video Communication Server - part number = 117500

  Application of Tandberg video Communication Server Expressway - part number = 1163402

  New video servers:

  VCS License Control - Part Number - R-VMVCS-CTRL-K9

  VCS Expressway License - Part Number - R-VMVCS-EXPWY-K9

  According to Cisco x8.2 Clustering:

  -Each peer runs on a hardware platform with equivalent functionality; for example, you cannot cluster one
  peer running on one core 2 average VM with peers running on base 8 large virtual machines

  Means that the physical old VCS cannot be grouped with new virtual VCS.

  Thank you.

  Hi zizou.

  You can include a device VCS with a VCS VM as long as their matches of software and their hardware platforms have equivalent capabilities.

  Device VCS clustered with VCS VM running on core 2 MediumVM = YES

  VCS machine clustered with VCS VM running on 8 cores LargeVM = No.

  "you can even cluster that are running on the standard devices with peers running on core 2 Medium VMs, but you can not group a peer running on a standard unit with peers running on base 8 large virtual machines.

  (p.4)

  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/infrastructure/VCs/config_guide/x8-7/Cisco-VCs-cluster-creation-and-maintenance-deployment-guide-x8-7.PDF

• Synchronization with a server of VI

  I currently have a server / multi-client application I implement with server of VI in LabVIEW 8.6.1.  Call to the server to execute different screws to store/retrieve/process data and the screw store data in files as well as globals function, i.e. an uninitialized moving records within a while loop.  I have a few questions about this implementation:

  1 are the calls made via VI server synchronized by VI Server; in other words, not realizing the reentrant Server VI VI never will launch multiple instances of the VI on the server system (I won't for obvious reasons)?

  2. I currently use some of the screws in my app server as static screw and also allow others to call in some of them from remote hosts via the server of VI, and I am concerned about the integrity of the data within my service globals (I took the precaution of open handles for all THE screws I share with VI Server so that they never go out of scope to be used as static or not).  Is this bad?  If I used only the VI server calls in my server application, it would be better (instead of using the 'shared' statically screw)?

  3. when a remote client is called on the server via a VI server, what happens when the VI is busy?  Does my remote call via an error call-by-reference node, or it fortunately waits his turn until the VI can be accessed (assuming that the #1 question is that one instance can never be executed).  I do have several systems to check the conditions of race.

  4. I use this implementation of VI server between Mac and Windows, do I need to be careful (in addition to the obvious path problems)?

  Thank you!

  -Danny

  TarantulaDiaz wrote:

  not realizing the reentrant Server VI VI never will launch multiple instances of the VI on server system?

  Only if it's a LIVING.

  In addition, even if it is reentrant, the VI server will not open multiple copies unless you set the flag in the options of the Ottawa Valley Railway (you can see the exact value using the primitive).

  If I used only the VI server calls in my server application, this would be better?

  I prefer the static approach for three reasons:

• ACS any Version with Windows Server 2008 R2 64-bit domain controller

  Hi all

  Is there any version of ACS is currently working with Windows Server 2008 R2 domain controllers?

  Our server controls has recently upgraded domain controllers to 2008r2 and off 2003 servers. This did not our ACS 4.1.4 really happy.

  I read now serveral messages about problems with the ACS and Server 2008r2 and hope to find a solution (not to mention that switching to LDAP, yukk).

  Thank you

  Pato

  ACS currently cannot be installed on a server running Windows 2008 R2.

  As an alternative, you can install ACS on a member server.  Authentication

  ACS uses the local machine net API authentication both compared to a 2008

  R2 domain will work.  The Remote Agent can also be installed on a 2008 R2

  Server if you use devices.

  If you install ACS on a member instead server here is how to configure services

  to authenticate properly with the domain:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.1/installation/guide/Windows/postin.html#wp1041304

  -Jesse