Hyper-v virtualization hardware

Similar Questions

• Split x 2 Windows 8.1 Pro Hyper-V virtualization

  I have a portable x 2 Split.  Activation Windows Pro 8.1 "Hyper-V" and allow "Virtualization technology" in the bios forces the system to get stuck at the spinning points at startup HP.  I tried this with v 23, 24 and 26 of the bios.  I also tried to disable 'Configuration USB3.0 in pre-os' in the bios without success.  None of my attempts worked.  Anyone encountered this or someone has a solution or suggestions?

  Hello ChewyMichael, welcome to the Forums of HP.

  I see that you have trouble getting to enable virtualization technology and the laptop to start after. I will try to help you with this.

  I would like to direct you to a position of @TwoPointOh : Re: unable to start HP Bios enabled for win8.1 Pro Hyper-V virtualization technology. It seems that there could be a problem regarding the bluetooth driver. Follow his steps, you'll need locate the driver for your model of laptop. So you can enter the product number here: HP drivers & downloads.

  Please let me know how it goes for you.
  Thanks for posting on the HP Forums.

• Windows Virtual PC cannot start because this computer does not support virtualization hardware-business intelligence

  I have a Sony Vaio VGN-NW235F and I am a student in the it field. A lot of my software are not supported by Windows 7. So I upgraded my Windows 7 Home Premium to Windows 7 Professional so that I can run Virtual PC. But I'm not able to run due to the above error...

  Please kindly help me

  Thanking you,

  Paths

  Salvation of the paths,

  Looks like you are trying to get XP Mode configured, that will install a virtual machine for you to run your legacy programs.  This feature is available in the professional versions, full and Enterprise edition - so your property in this aspect.

  You get this error message because you do not have the chip installed for hardware - assisted virtualization technology and it's good. you don't need more.  Click on this link http://www.microsoft.com/windows/virtual-pc/download.aspx and select your language and edition.  Then scroll down to step 3.  You must download and run the third component called Windows XP Mode Update. This update will remove the requirement that you have the chip mentioned above.

  That should do the trick.

  Barbara

• How do you turn with the virtualization of hardware assisted for a T510 Intel I5

  I'll put up a T510 with Windows 2008R2 as a mobile demonstration platform and I want to run Hyper-V on it. Hyper V requires hardware virtualization and reading through the form of i5 that looks like it is taken in charge. Is - this automatically active (I see that Hyper threading is turned on by looking at the Task Manager) if not how can I activate this.

  Thank you

  Search BIOS Intel VT and Intel VT - d. You must enable at least VT VT - d is not required (it has to help IO virtualization).

  NAP.

• Windows 8 Pro hyper-v option appears in "turn windows features on / off.

  Attempted activation of hyper-V on the new pc.

  I confirmed the processor supports hyper-v using the intel cpu tool and Securable.exe

  SecurAble arrives with the following information:

  Intel Core i7-3n70x CPU @ 3, 5 GHz

  Maximum length = 64 bit

  Hardware D.E.P. = Yes

  Hardware virtualization = Yes

  Type MSINFO32 in the windows pane window 8 fact appear in system information:

  Under System summary

  Hyper-V VM Monitor Mode Extensions - YES

  Hyper-V second level translation Extensions address - YES

  Hyper-V, virtualization enabled in firmware - YES

  Hyper-V data execution protection - YES

  Everything as expected.

  BTW, running Windows 8 PRO

  My ideas regarding how to make the option appear in "Turn windows features on / off.

  Help... Everyone!

  This problem has been resolved. As my pc was a new purchase, the issue ended up being that the seller installed windows 8 home edition not pro. As soon as I reinstalled the pro version of windows 8, hyper-v settings appeared.

  Morale... Make sure that you get exactly what you buy.

  I hope this helps.

• VMWare workstation + Hyper-V (Windows 8)?

  I know that in the past I tried to combine hyper-v on a machine and vmware workstation that has not worked. I don't understand why because both probably need exclusive access for virtualization by the processor hardware. This use case will still work? I didn't know if this is a hardware or software limitation. Perhaps more recent processors allow multiple layers of virtualization access pieces of virtualization? The reason I ask is I would like to install hyper-v on my machines of windows 8, but hyper-v has limits that vmware fillings of workstation (namely that support usb) so I wonder if it will ever be possible (or maybe that's now because I tried really long ago) or do you think it will always be a limitation?

  BTW: The current processor, I'm declining to do so is a bridge of Ivy (i7-3770).

  Thank you...

  On a deck of Ivy, you can run Workstation as a comments under Hyper-V hypervisor, but you will be limited to 32-bit guest nested under my computer, because Hyper-V virtualizes not features of virtualization assisted by the physical processor hardware.  See nested running VMs.

• Satellite L875D: There is possibility to enable virtualization in the BIOS?

  Hello

  I want to buy Toshiba L875D-S73.

  I know supports CPU AMD - V required for the performance of like Microsoft Hyper-V virtualization.
  But I don't hear anything about BIOS.

  Is - this ability to enable virtualization in the BIOS?
  Maybe you know?

  Unfortunately I do not have this model laptop but I guess there is no option for virtualization in the BIOS. If the processor supports the it, it must be enabled by default.

  I m not sure but I think that laptops equipped with platform AMD do not support virtualization technology, so in my opinion, you should buy model with no D in the name. All models with D have the AMD platform.

  Contact your local dealer and ick information on other models of laptops.

• Virtualization to support HP P6-2120 not found

  Hi, I need to enable virtualization hardware on my desktop Hp p6-2120-aided, but I'm afraid that I don't find it in the BIOS. Does anyone know how to do? Your help is very appreciated.

  Hello:

  See if the BIOS of your PC is set to VT as shown below...

  

• Intel Virtualization Technology - Thinkcentre A58 - Pentium Dual-Core E5300

  Hello

  I am considering buying a ThinkCentre A58 with a clocked Intel E5300 processor
  Model/type: 7515-7SG

  I would like to run "Windows XP Mode" on Windows 7 Pro.

  For the XP Mode, I need ability IVT.

  My Question is:

  The Lenovo 7515-7SG come with an E5300 CPU which is capable Intel virtualization technology?

  IVT depends on the TECHNICAL Code of the E5300 CPU.

  Intel offers CPU E5300, who do not have the ability of IVT.

  E5300 know:
  http://Ark.Intel.com/product.aspx?ID=35300#specs

  E5300 Code TECHNIQUE

  * SLB9U: IVT No.
  * SLGTL: IVT Yes

  Check the E5300 features supported:

  http://processorfinder.Intel.com/list.aspx?ParentRadio=all&ProcFam=2841&SearchKey=

  Even if Lenovo ships an E5300 with SPEC Code SLGTL - needs a BIOS that does not block IVT.

  ... made the A58 BIOS IVT available?

  I already searched the Lenovo Thinkcentre A58 product support site - has not found something valuable.

  Thank you

  I found the answer.

  I'm sitting in front of a whole new Thinkcentre A58 7515-7SG equipped with a Pentium Dual Core E5300

  http://forums.Lenovo.com/T5/welcome-FAQs/tool-to-check-support-for-Windows-XP-mode/m-p/167695

  Detection of virtualization hardware support tool says:

  This computer is configured with

  hardware support for virtualization.

  Great!

  My A58 can run Windows XP Mode

  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

• Amount of memory overhead increases with hw assisted virtualization cpu?

  Hello

  browsing through some content, this paragraph has triggered my attention:

  What helps support CPU virtualization increases the amount of memory.

  Why is this? I can understand that if the MMU does not support the RVI/EPT, the management of the TLB and fictitious tables won't in a memory overload, but I don't see how hw assisted virtualization CPU has to do with it. (I guess that ESXi needs these same tables if using BT).

  I must be missing something here, someone willing to help me? Thank you!

  I don't know where this text comes from, but it's a mess.  The mention of version 9 of material almost certainly guarantee that it is in reference to virtualized virtualization assisted by material, which was officially introduced in version 9 hardware.  If so, the second sentence is a complete non-sequitur. The third sentence is again, very certainly with respect to virtualization to support virtualized.

  Using (as opposed to virtualization) hardware-assisted virtualization is independent of the version of the virtual hardware, does not increase the amount of memory required General and does not restrict vMotion to hosts that support hardware-assisted virtualization.

  Hardware support for virtualization virtualization does all of the things mentioned, * except * for a more effective implementation of the hypervisor.

• Core i7 - both vmware and hyper V not running any X 64 Machine virtual (X 32 VM Client works on vmware Xp/vista) built on Windows Server 2008 X 64 basic

  The vmware and hyper V not running any X 64 Machine virtual (X 32 VM Client works on vmware Xp/vista) built on Windows Server 2008 X 64 Basic.

  Windows (pre install UI) error code install (0xc000035a) that the processor does not support X 64 Mode

  Any of that with core i7 system any help would be much appreciated, thanks

  -Software VMware Server 2.0.0 122956 - OR - VMware Workstation 6.5.1 126130 - OR- Microsoft Hyper V

  -Tried - BONE at BASE of MATERIAL AND the VM ENVIRONMENT

  X 64 Windows Server 2008 6001 - OR - X 64 Windows Server 2008 6002 - OR - X 64 Server Windows 7 6801

  System - Core i7 920 + X 58 (GA-EX58-UD5) + 6 GB DDR3 + OCZ SSD

  Intel Core i7 920 Webpage - http://www.intel.com/products/processor_number/chart/corei7.htm

  Gigabyte GA-EX58-UD5 - latest version of the Bios F3

  Web page - http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ClassValue=Motherboard & ProductID = 2958 & ProductName = GA-EX58-UD5

  Advanced features of MB Bios CPU - tried Both ON and OFF

  Hyper Threading - Threading 4 AND 8

  Intel Virtualization - ENABLE AND DISABLE

  Looked in the VM Bios as well

  6 GB DDR3 3X2GB 1600

  Please, see troubleshooting problems of Intel VT - x.

  Also note that you can not the role Hyper-V installed in the parent partition, if you want to run the VMware using VT products, as Hyper-V virtualizes the parent partition, but it only virtualizes the VT CPU features.

• Connected battery does not support 11%

  Question, that of why the battery is holding at 11 percent, hip but not load? I can do to remedy this? What may cause this etc... ?
  
  Early in the morning of 10/07/2016 shows 11% battery not charge.
  
  I plugged last night during the 9 p.m. Mountain time.
  
  After connecting, I was running Utorrent 3.4.9 of the overnight download of some files.
  
  A pilot plant was held yesterday 373.06 out ready driver NVIDIA GEForce game date 10/05/2016 - cost very spotless and without incident.
  
  I have two cables of load. Both worked fine yesterday.  Both are connected to a different location on a different circuit. Overvoltage protected by Belkin.
  
  Thank you, and here are my coordinates of the system.
  
  Name of the operating system Microsoft Windows 10 home
  Version 10.0.14393 Build 14393
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  System name XXXXXXXXXXXXXX
  System manufacturer Hewlett-Packard
  HP ENVY 17 Notebook PC model system
  System Type x 64-based PC
  System SKU xxxxxxxxxx
  Processor Intel Core i7-4510U CPU @ 2.00 GHz, 2601 Mhz, 2 Lossnay, 4 logical processors
  BIOS Version/Date Insyde F.42, 18/03/2015
  SMBIOS Version 2.8
  Embedded Controller Version 77,53
  UEFI BIOS mode
  Baseboard manufacturer Hewlett-Packard
  Model baseboard is not available
  Name of plinth base
  Role Mobile platform
  Start secure State
  PCR7 Configuration binding is not Possible
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "10.0.14393.206".
  User name xxxxxxxxxxxxxx
  Time Zone MST
  Physical memory (RAM) installed 12.0 GB
  11.9 GB total physical memory
  7.90 GB available physical memory
  13.7 GB total virtual memory
  9.38 GB available virtual memory
  1.81 GB page file space
  Paging file C:\pagefile.sys
  Hyper-V - VM monitor Mode Extensions Yes
  Hyper-V - second level address translation Extensions Yes
  Hyper-V - virtualization enabled in Firmware No.
  Hyper-V - data execution Protection Yes

  Hi @gdcgray,

  Welcome to the HP forums! It's a great way to engage, ask questions and find resolutions by working with specialists from the community of HP. I understand that you have a battery problem with an error "plugged in, not load ' and the battery does not fresh at all. It'll be a pleasure to help you with this.

  A remarkable work has been done by you by performing a basic troubleshooting before you post your question in the forums of HP. It's always a great pleasure to work with tech-savvy and technically customers sounds like you. Kudos to you for this. I am amazed at your technical skills and levels of technical knowledge.

  It certainly looks like the battery needs to be replaced. However, let's first establish that it is the battery and not the connector of battery on the motherboard that is defective controller.

  Please follow these steps.

  Please try a hard reset first. Steps to follow:

  • Turn off the computer and unplug the charger. Then remove the battery only if it is removable.
  • Press and hold the power button on the unit for 15 seconds to carry out the static electrical charges inside the machine.
  • Replace the battery and reconnect the charger
  • Please try to calibrate the battery.
  • Please update the bios from this link http://hp.com/drivers
  • Run the battery from this link: http://support.hp.com/in-en/document/c03467259

  Please run all the tests of components and if the battery is not please take note of the failure code.

  I hope this helps. Please let me know how it goes. I really hope that the problem is solved without hassle and the computer works great. Thank you for being a part of the community of HP. Please let me know if this can help, and if this is the case, please mark this message as a "'Solution Accepted". " Kudos would be also greatly appreciated for my efforts help. You can simply click on the ""Thumbs Up "button. "

  Thank you and have a blessed week ahead!

• HP Pavilion dv6: screen divided into 4

  Please, the machine restarted when I got a BSOD whith the memory management code, after having resolved, my HP logo divided into 2 a top and a bottom, but is returned to normal, it does this for about a week and this time, he does not return to normal

  so I started at the login screen and I saw that it was 4 with 2 vertical on the right full screens and 2 screens of half verical on the left

  so I reinstalled windows, but to no avail.

  I've also updated my drivers buht

  I connected to an external monitor, it looks perfect

  Name of the OS Microsoft Windows 10 Pro

  Version 10.0.10240 Build 10240

  Another Description of the OS is not available

  Manufacturer of operating system Microsoft Corporation

  Name of system OFFICE-ACO8E6T

  System manufacturer Hewlett-Packard

  HP Pavilion dv6 Notebook PC model system

  X 64 PC system SKU C2Y45AAR is of Type #ABA

  Processor Intel Core i7-3630QM CPU @ 2.40 GHz, 2401 Mhz, 4 Lossnay 8 logical processors

  BIOS Version/Date Insyde F.26, 03/04/2013

  SMBIOS Version 2.7

  Embedded Controller Version 52.24

  UEFI BIOS mode

  Baseboard manufacturer Hewlett-Packard

  Model baseboard is not available

  Name of plinth base

  Role Mobile platform

  Start secure State

  PCR7 Configuration binding is not Possible

  Windows directory C:\Windows

  System directory C:\Windows\system32

  Boot Device \Device\HarddiskVolume2

  The local United States

  Hardware Abstraction Layer Version = "10.0.10240.16392".

  User name of OFFICE-ACO8E6T\LIVINGSTONE

  Time zone Pacific Daylight Time

  Physical memory (RAM) installed 8.00 GB

  7.89 GB total physical memory

  5.57 GB available physical memory

  9,77 GB total virtual memory

  7.42 GB available virtual memory

  Pagefile 1.88 GB of space

  Paging file C:\pagefile.sys

  Hyper-V - VM monitor Mode Extensions Yes

  Hyper-V - second level address translation Extensions Yes

  Hyper-V - virtualization enabled in Firmware Yes

  Hyper-V - data execution Protection Yes

  Hi @OPTIMISTICSTONE,

  Thank you for joining the HP Forums!

  I noticed your post on how your screen divided into 4 with your HP Pavilion dv6 Notebook. I'm happy to help you!

  What is the number of product/model of your HP Pavilion dv6? How can I find my model number, serial number or product? There are several versions, example: HP Pavilion dv6500.

  For now, maybe the steps described in this guide will help. Solve the problems when switch between views using FN + F4.

  Don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I hope this guide to solve your problem!

• HP Pavilion Notebook PC g6: IDT Audio PC stopped working

  Hello

  A few days ago I upgraded my Version of the OS of Windows 8 for Windows 10, now the question is the dolby sound system broke down.

  from the pc speaker sounds are too loud, I tried to display dolby at default settings but his error showing that "IDT PC Audio stopped working".

  Please suggest me the way to shortout this, thanks in advance.

  Here are the full details on my PC OS:

  Name of the operating system Microsoft Windows 10 unilingual home
  Version 10.0.10586 Build 10586
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  Name of the KAMLESHJHAPC system
  System manufacturer Hewlett-Packard
  HP Pavilion Notebook PC g6 model system
  System Type x 64-based PC
  SKU C9L68PA #ACJ system
  Processor Intel Core i3 - 3110M CPU @ 2.40 GHz, 2400 Mhz, 2 Lossnay, 4 logical processors
  BIOS Version/Date Insyde F.25, 29/05/2013
  SMBIOS Version 2.7
  Embedded Controller Version 56.50
  UEFI BIOS mode
  Baseboard manufacturer Hewlett-Packard
  Model baseboard is not available
  Name of plinth base
  Role Mobile platform
  Start secure State
  PCR7 Configuration not available
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "10.0.10586.0".
  KAMLESHJHAPC\windows user name
  The time zone India standard time
  Physical memory (RAM) installed 4.00 GB
  3.89 GB total physical memory
  1.07 GB available physical memory
  4.89 GB total virtual memory
  1.18 GB virtual memory
  Page file space 1.00 GB
  Paging file C:\pagefile.sys
  Hyper-V - VM monitor Mode Extensions Yes
  Hyper-V - second level address translation Extensions Yes
  Hyper-V - virtualization enabled in Firmware No.
  Hyper-V - Data Execution Protection formerly name Microsoft Windows 10 single Home Language
  Version 10.0.10586 Build 10586
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  Name of the KAMLESHJHAPC system
  System manufacturer Hewlett-Packard
  HP Pavilion Notebook PC g6 model system
  System Type x 64-based PC
  SKU C9L68PA #ACJ system
  Processor Intel Core i3 - 3110M CPU @ 2.40 GHz, 2400 Mhz, 2 Lossnay, 4 logical processors
  BIOS Version/Date Insyde F.25, 29/05/2013
  SMBIOS Version 2.7
  Embedded Controller Version 56.50
  UEFI BIOS mode
  Baseboard manufacturer Hewlett-Packard
  Model baseboard is not available
  Name of plinth base
  Role Mobile platform
  Start secure State
  PCR7 Configuration not available
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "10.0.10586.0".
  KAMLESHJHAPC\windows user name
  The time zone India standard time
  Physical memory (RAM) installed 4.00 GB
  3.89 GB total physical memory
  1.07 GB available physical memory
  4.89 GB total virtual memory
  1.18 GB virtual memory
  Page file space 1.00 GB
  Paging file C:\pagefile.sys
  Hyper-V - VM monitor Mode Extensions Yes
  Hyper-V - second level address translation Extensions Yes
  Hyper-V - virtualization enabled in Firmware No.
  Hyper-V - data execution Protection Yes

  JAI KAMLESH
  

  Hello:

  Have you tried the W8.1 audio driver?  If this is not the case, see if it works.

  This package contains the driver that allows Audio IDT high definition (HD) in the notebook models that are running a supported operating system.

  File name: sp59649.exe

  Or try this one...

  This package contains the driver that allows to the Audio IDTHigh-definition (HD) in models of laptops that arerunning an operating system supported.

  File name: sp63555.exe

• installation of iTunes on Windows 10 problems

  Trying to activate my new 6 iPhone more and get the error on iTunes.

  

  iTunes is installed on a machine with the following configuration:

  Written System Information report to the: 10/12/15 14:54:30
  Name of the system: not available
  [System summary]

  Value of the element
  Name of the OS Microsoft Windows 10 Pro
  Version 10.0.10586 Build 10586
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  Name of the system unavailable
  System manufacturer Dell Inc.
  System model Latitude E6520
  System Type x 64-based PC
  SKU system
  Processor Intel Core i7-2720QM @ 2.20 GHz, 2201 Mhz, 4 Lossnay 8 logical processors
  A19 BIOS Version/Date Dell Inc., 14/11/2013
  SMBIOS Version 2.6
  Embedded Controller Version 255.255
  BIOS Legacy Mode
  Baseboard manufacturer Dell Inc.
  Model baseboard is not available
  Name of plinth base
  Role Mobile platform
  State of secure boot not supported
  PCR7 Configuration binding is not Possible
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume1
  The local United States
  Hardware Abstraction Layer Version = "10.0.10586.0".
  RAK-PC\RAK username
  Time zone Eastern Standard Time
  Physical memory (RAM) installed 8.00 GB
  7.88 GB total physical memory
  5.17 GB available physical memory
  9,76 GB total virtual memory
  7.05 GB available virtual memory
  Pagefile 1.88 GB of space
  Paging file C:\pagefile.sys
  Hyper-V - VM monitor Mode Extensions Yes
  Hyper-V - second level address translation Extensions Yes
  Hyper-V - virtualization enabled in Firmware Yes
  Hyper-V - data execution Protection Yes

  Then, I tried the upgrade of the iTunes application and got the following error:

  

  I ran the latest Windows updates and still the same above errors continue to occur. Any help will be greatly appreciated.

  Try to repair the Apple Software Update of the programs and features Control Panel, and then reinstall iTunes.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Make sure after you have uninstalled all the components Apple to remove iTunes shortcuts from the desktop, taskbar, or start menu before you reinstall.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  If the problem persists and you have a 64-bit system try for the old version of video cards which is a 64-bit Installer for most of the 32-bit code, similar to all 64 bit iTunes up to 12,1 versions.

  TT2