Hyperion 11.1. 2.0 installation fails with ' a few pots referenced do not exist.
Hi allI try to install Hyperion 11.1.2.0 on my laptop. If the requirements document says that the operating system is windows 2003 or 2008, I read that people are able to run on other OS' as well.
I downloaded the files below:
V20779-01
V20782-01
V20783-01
V20790-01
V20792-01
V20799-01
V20800-01
V20801-01
V20802-01
V20843-01
V20850-01
I have the card installed loopback and OBIEE 11 g running on weblogic server.
The installation of the EMP crossed successfully as I see in the newspaper. But when I try to configure the "EPM System Configurator" command ends with the below error message:
---------------------------
Preconfigured running check...
Performance audit EPM_ORACLE_HOME...
Value of the EPM_ORACLE_HOME environment variable: F:\OracleBI11G\EPMSystem11R1
Value of JAVA_HOME environment variable: F:\OracleBI11G\EPMSystem11R1\... \jdk160
_11
Check EPM_ORACLE_HOME successful
Running. check oracle.products... Oracle.Products successful check
Pots running manifest check...
Time spent for parsing manifests: 220 ms
Maximum depth reached in pots: 6, while the restriction: unrestricted
Analyzed 383 manifests
Total jars and classpath entries met: 383
Total non-existing referenced classpath entries count: 22
Total of classpath to check items: 67
ERROR: F:\OracleBI11G\modules\org.apache.ant_1.7.0\lib\xercesImpl.jar not
There are; depth of the file: 3; referenced from F:\OracleBI11G\EPMSystem11R1\common\jlib\
11.1.2.0\ctg.jar referenced from F:\OracleBI11G\EPMSystem11R1\common\jlib\11.1.2
.0\epm_j2se.jar referenced from F:\OracleBI11G\EPMSystem11R1\common\config\11.1.
2.0\configtool.jar
FATAL ERROR: Pots manifest verification failed with the message "some referenced jars don't."
t exist.
Output in 30 seconds
------------------------------
After reading a similar position in OTN, which suggests that this could result from OSH not installed correctly, I reinstalled OHS successfully.
I still get this error. Can someone help me how to get around this problem.
Thank you
Sandeep.
I had the same problem with you. If you check in your physical directory, you cannot find F:\OracleBI11G\modules\org.apache.ant_1.7.0. Maybe when the installtools installed the EPM system, he detected that apache had been installed by OBIEE. You might find some F:\OracleBI11G\modules\org.apache.ant_1.7.1. The way I took to configtools worked was by copying F:\OracleBI11G\modules\org.apache.ant_1.7.1 to F:\OracleBI11G\modules\org.apache.ant_1.7.0 and re run the configtools.
Now I got another problem when I tried to deploy the service foundation on weblogic. He gave me EPMCFG-10067: could not get the user admin for the domain name.
Try to copy F:\OracleBI11G\modules\org.apache.ant_1.7.1 to F:\OracleBI11G\modules\org.apache.ant_1.7.0. Perhaps after that you can help me solve my problem.
Tags: Business Intelligence
Similar Questions
-
The site compatibility Windows 7 says that this OS is compatible with my Officejet G85 all-in-one old. Whenever I try to add this printer is using the automatic functions or manual installation of the driver fails and I get the error message that "print processor does not exist. I tried to install the original with the most recent compatibility software is Windows 2000, but Windows 7 does not allow indicating that the program already exists and I have to uninstall it first. However, I can't find it listed anywhere for uninstall it, and the original software disk does not have this feature either. HP does not support printer and would not help provide. This printer worked perfectly with Windows XP and we really like it is equipped. Please help us raise this printer up and running with Windows 7 64 bit home edition. I tried things I found that it was similar in the forum with no success so far.
Hello
You can run the printer troubleshooter. Convenience store solves some common printing problems.
If your computer has problems printing, try using the printer Troubleshooter to solve the problem. He made sure that a printer is connected to your computer, and it checks for common issues such as whether the printer has enough paper and toner to complete printing your document.
Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.
Reference:
Open the printer Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-TroubleshooterSee the following articles from Microsoft for more information on installing a printer or driver printer:
Install a printer
http://Windows.Microsoft.com/en-us/Windows7/install-a-printerFind and install printer drivers
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-driversIf the problem persists, you can contact the manufacturer of the printer for more information.
http://WWW8.HP.com/ca/en/support-drivers.html
Hope this information helps.
-
HP DeskJet 1512: DeskJet 1512 Installation fails with Windows 10
I just updgaded my g7 HP Pavillion from Windows 7 to Windows 10 and I can not get my DeskJet 1512 to work. I went to the HP site to shoot down the latest drivers from my drive for installtion of origin has no Windows 10 drivers on it. Driver downloads, but the installation fails with the message: "the an installer for this device cannot perform the installation at this time." I have administrator rights on my laptop, no one else is logged on, and I have no other applications running. Any suggestions?
Hey there John!
Please try my suggestions and getting back to me. You can try downloading and running the print and Scan Doctor then choose "Difficulty of printing" and let it run its course. See what the end results you show here and then try again to print. Please also let me know what the results show.
Try printing a few programs various (Notepad being one of them please) to see if the problem is with a single program, or all of them. Maybe a firewall can block the connection, try to leave this option off when you try to print from the few programs.
Good luck! Enjoy your day
-
Hello
I installed the role of CA of the authority in the installation, I want to use the existing root certificate when I try to import this certificate .pfx, that I have this error
Active Directory certificate services installation failed with the following error: unknown mapping algorithm. 0 X 80091002 (-2146889726 CRYPT_E_UNKNOWN_ALGO)
Anyone know what's wrong
Thanks for help.
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
If you give us a link to the new thread we can point to some resources it -
The Service Pack installation failed with the 0x8e5e03fe error code.
Hi all
I'm not able to install Windows Server 2008 R2 SP1, when I install SP1, its going very well up to 90%, after that its giving the below error.
' 1. the Service Pack installation failed with the error 0x8e5e03fe. ".
2 "changes in an update (Service Pack for Microsoft Windows (KB976932)) failed during the installation of the Service Pack.
Identity: Package_for_KB976932 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.1.17514
Error code: 0x8e5e03fe
State: 7 "
I took the following steps to resolve. but it's not helping me.
1. I CA anti-virus, I disabled the Agent Client of CA.
"2. I installed Windows analysis tool, but I did ' t get any error, under the errorlog for your reference."
=================================
Preparation of control system was updated.
Binary version 6.1.7601.21645
Package Version 11.0
2011-04-16 15:49Checking Windows Service Packages
Checking of manifests package and catalogs
Checking package Watchlist
Watchlist checking
Checking packages
Control components store
Summary:
Seconds executed: 753
No error found.3. I ran this commond ""dism / online/Remove-Package /packagename:Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514 " "
Please help me
Concerning
Ganga
Hi Ganga,
Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Windows Server Forums. Please post your question in the Windows Server forum.
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/
-
The printer driver installation fails with:
Setup error
Call to DrierPackageINstall returned error 1627 for package
"C:\Program HP HP Officejet Pro 8610\DriverStore\Yeti\hpvyt13.inf"Tried to install base drivers and a full suite as a user and administrator. Also tried a clean boot (close unnecessary services and restart). I went to look for the file in question, but it does not appear to exist (there is no HP directory in Program Files).
Hello
This can happen for several reasons, most common duration to a problem with the registry permissions.
I would suggest trying the following tool, it is a 3rd party utility that analyze and repair registry permissions, and so you can use it at your own risk (I used it several times without any problems):
http://www.MajorGeeks.com/mg/getMirror/tweaking_com_reset_registry_permissions, 1.html
Click the Start button and let a few minutes (it may take some time, about 5-10 minutes), the journal stated: "" once it ends.
Then try to reinstall the HP software and check for the difference.
If the same continues I suggest contacting HP sopport to continue such troubleshooting.
You can find the detais contact for your region below:
http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html
Hope that helps,
Shlomi
-
JO 3830: Device Installation failed with 2081883393
Hello
I tried to install my printer but cannot go beyond the part of network installation.
Printer is connected to a Wi - fi connection, PC sees the printer and found during the installation process.
But there is this error code in the log file:
"Device installation failed with-2081883393.
How can I get my printer to install correctly?
I can't even install it via USB and I tried all the steps in the Troubleshooting FAQ.
I also tried all the steps of this thread:
Please help me I am desperate.
Concerning
PS Fax and scanning has been installed properly, then scanning works. Print to the printer also works. Only install under win7 print driver is buggy.
Hi 8lives
Thanks for the quick response and the link. Unfortunately, these measures have nothing to solve the problem.
But I found the solution myself:
the system variables %tmp% for the temp folder when incorrect. I removed a disk on which I had the temp folder, and Windows do not rewrite these variables.
1 Control Panel > system > advanced system settings > advanced > Environment Variables > System Variables
2. change E:\Temp in C:\Windows\Temp for 'Temp' and 'Tmp '.
I hope that maybe I can help someone else with this solution.
Kind regards.
-
I tried to run the .NET framework. All files are downloaded, but finally the installation failed with error code: (0x80070005)
NET FRAMEWORK 4 fails installation
1) download setup of .net 4 by http://www.microsoft.com/download/en/details.aspx?id=17718
2) double-click the downloaded file to start the installation
-
Error "LoadLibrary failed with error 126: the module is not found ' at the launch of programs
Original title:
From some programs, the program starts partially, then a pop up message saying "LoadLibrary failed with error 126: the module is not found. When you click on the 'OK' button, the program stops. I had this problem with several graphics applications such as PSP and Rhinoceros 3D.
Any suggestions what can be causing this "error 126"?type cmd and click the black box for it...
-
Build request failed with the message: helloWorld/Dokumente / is not a valid path
Hello
Unfortunately ripple does not work under Windows 7, so I tried on Mac. On Mac, I have the following parameters in the ripple:
SDK path: / Developer/SDKs/Research in Motion/BlackBerry WebWorks SDK 2.3.1.5
The project root: / Dokumente/helloWorld
Archive name: helloWorld
Output folder: / Dokumente/BlackBerryOutputThere is the file config.xml and index.html file in the helloWorld file
I have for this site:
When I try to pack in ripple, I get:
Build request failed with the message: helloWorld/Dokumente / is not a valid pathThere is a message ' no simulators found "on the bottom of the settings, too." '
I tried different paths, one of my localhost in Apache, but nothing works. What's wrong??
Well, the path was not "consistent". I hate the f... Mac: / Users/Valentina/Documents/helloWorld to the project root and/Users/Valentina/Documents/BlackBerryOutput was necessary.
Just in case somebody stumbles on the same problem.
-
Identification of customer's Windows 7 NFS UID GID information
I am trying to connect to the Windows 7 Client NFS on a server running on a computer (VxWorks) NFS. I am able to properly connect Client NFS software by a 3rd party on the NFS server. However, when I use the Client for NFS provided by Windows 7, I am unable to connect. The \\ip address\share Z: mount"command fails with the error code"the path not found network ". I can't do a ping of the computer running the NFS server.
The NFS Client operating system: Windows 7 Ultimate, 64-bit
Data captured by Wireshark
MOUNT V1 EXPORT call 3rd party client
Identification information Flavor: AUTH_UNIX (1)
Length: 32
Stamp: 0xc7065970Machine name: PC
UID: 1000
GID: 1000MOUNT V1 EXPORT appeal of the NFS client
Identification information Flavor: AUTH_NULL (0)
Length: 0It seems that the credentials of NFS Client are not correct. How can I change the flavor of AUTH_UNIX and the UID and GID to 1000?
Hello VDAEMP,
As Eddie and Sudarshan has said, the Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the public IT pro TechNet forums below:
TechNet - Windows Server
Thank you -
TNS-12545: Connect failed because target host or object does not exist
Hi all
I have two hosts with me. 1 host1 and 2. host2. Host1 have ORCL database. And when I'm doing the tnsping to host2 for database ORCL I get error below.
[oracle@host2 ~] $ hostname
host2.example.com
[oracle@host2 ~] $ tnsping ORCL
AMT Ping utility for Linux: Version 11.2.0.1.0 - Production on 5 April 2014 20:31:40
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Use settings files:
TNSNAMES adapter used to resolve the alias
Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = ORCL)))
TNS-12545: Connect failed because target host or object does not exist
Here's my tns annually involves Details:
on host1:
[oracle@host1 admin] $ listener.ora more
listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = ORCL. WORLD)
(ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = ORCL)
)
)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521))
)
)
ADR_BASE_LISTENER = / u01/app/oracle
[oracle@host1 admin] $ more tnsnames.ora
tnsnames.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORCL)
)
)
MYTEST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = host2.example.com) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = MYTEST)
)
)
LSNRCTL > status
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=host1.example.com) (PORT = 1521)))
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start date April 5, 2014 20:09:33
Uptime 0 days 0 h 25 min 1 sec
Draw level off
Security ON: OS Local Authentication
SNMP OFF
Parameter Listener of the /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora file
The listener log file /U01/app/Oracle/diag/tnslsnr/host1/listener/alert/log.XML
Summary of endpoints listening...
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=host1.example.com) (PORT = 1521)))
Summary of services...
Service "ORCL" has 1 instance (s).
Instance "ORCL", State LOAN, has 1 operation for this service...
Service "ORCL. The WORLD' has 1 instance (s).
Instance "ORCL", status UNKNOWN, has 1 operation for this service...
Service 'ORCLXDB' has 1 instance (s).
Instance "ORCL", State LOAN, has 1 operation for this service...
The command completed successfully
On host2:
[oracle@host2 admin] $ listener.ora more
listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = MYTEST. WORLD)
(ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = MYTEST)
)
)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = host2.example.com) (PORT = 1521))
)
)
ADR_BASE_LISTENER = / u01/app/oracle
[oracle@host2 admin] $ tnsname.ora more
TNSNAME.ora: no such file or directory
[oracle@host2 admin] $ more tnsnames.ora
MYTEST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = host2.example.com) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = MYTEST)
)
)
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORCL)
)
)
Please help me what I do in configuring the listener and tns.
Kind regards
Michel
fb767351-A660-4b18-9a9f-73bc141f6a0c wrote:
Hi all
I have two hosts with me. 1 host1 and 2. host2. Host1 have ORCL database. And when I'm doing the tnsping to host2 for database ORCL I get error below.
[oracle@host2 ~] $ hostname
host2.example.com
[oracle@host2 ~] $ tnsping ORCL
AMT Ping utility for Linux: Version 11.2.0.1.0 - Production on 5 April 2014 20:31:40
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Use settings files:
TNSNAMES adapter used to resolve the alias
Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = ORCL)))
TNS-12545: Connect failed because target host or object does not exist
If your entry for "ORCL" tnsnames decided to 'contact' indicated info. He tried to send a ping packet to the server identified by "(HOST = host1.example.com)". " Oracle tns transmitted the request to the network stack of BONES for the resolution and routing. Here, 'host1.example.com' host name could not be resolved to an IP address, or if it was, it was an IP address that is a dead-end.
Here's my tns annually involves Details:
We see the details necessary out of your tnsping tns. Since the application never had the host (as is obvious in the error message), nothing about the questions of the listener - he never got.
on host1:
As your example tnsping host2, and says that the error message obvious host1 is nowhere to be found, like the listener, none of the files of configuration on host1 question - demand ever on host1.
[oracle@host1 admin] $ listener.ora more
listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = ORCL. WORLD)
(ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = ORCL)
)
)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521))
)
)
ADR_BASE_LISTENER = / u01/app/oracle
[oracle@host1 admin] $ more tnsnames.ora
tnsnames.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORCL)
)
)
MYTEST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = host2.example.com) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = MYTEST)
)
)
LSNRCTL > status
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=host1.example.com) (PORT = 1521)))
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start date April 5, 2014 20:09:33
Uptime 0 days 0 h 25 min 1 sec
Draw level off
Security ON: OS Local Authentication
SNMP OFF
Parameter Listener of the /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora file
The listener log file /U01/app/Oracle/diag/tnslsnr/host1/listener/alert/log.XML
Summary of endpoints listening...
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=host1.example.com) (PORT = 1521)))
Summary of services...
Service "ORCL" has 1 instance (s).
Instance "ORCL", State LOAN, has 1 operation for this service...
Service "ORCL. The WORLD' has 1 instance (s).
Instance "ORCL", status UNKNOWN, has 1 operation for this service...
Service 'ORCLXDB' has 1 instance (s).
Instance "ORCL", State LOAN, has 1 operation for this service...
The command completed successfully
On host2:
Okay, the problem being that a client on host2 couldn't solve a connection to hos1, these could be revealing.
[oracle@host2 admin] $ listener.ora more
listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = MYTEST. WORLD)
(ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = MYTEST)
)
)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = host2.example.com) (PORT = 1521))
)
)
ADR_BASE_LISTENER = / u01/app/oracle
Except that in the example, we work with, host2 is the customer, trying to reach a database on host1. Any listener on host2 is totally irrelevant.
[oracle@host2 admin] $ tnsname.ora more
TNSNAME.ora: no such file or directory
[oracle@host2 admin] $ more tnsnames.ora
MYTEST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = host2.example.com) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = MYTEST)
)
)
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORCL)
)
)
It's the only tns configuration file that is important for the problem at hand. And we already knew what he said, since the output of your command of tnsping.
Please help me what I do in configuring the listener and tns.
Kind regards
Michel
Is "host1.exampl.com" the real hostname of your machine "host1"? Or you made that blur in your ad - thing quite legitimate to do this for security reasons.
Whatever, this is not really a matter of tns, unless of course 'host1.example.com' is really what you put in the tnsnames file, but your server "host1" became really something else.
Assuming that 'host1.example.com' is the correct value, debugging starts with the following:
[oracle@host2 admin] $ ping host1.example.com
[oracle@host2 admin] $ tracerout host1.example.com
-
ORA-12545: Connect failed because target host or object does not exist
Hi all
I am not able to connect database remotely. I have two servers with the name U.S. and localhost. Here are my coordinates tns:
Details of the host server we:
[oracle@US admin] $ more tnsnames.ora
tnsnames.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/db_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
PROD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = EN)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = prod. WORLD)
)
)
PROD_STBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = prod. WORLD)
)
)
[oracle@US admin] $ more sysconfig
Networking = yes
NETWORKING_IPV6 = yes
HOSTNAME = US.localdomain
[oracle@US admin] $ more/etc/hosts
# Do not remove the next line, or various programs
# requiring a network functionality will fail.
127.0.0.1 localhost.localdomain localhost
: US.localdomain6 1 U.S.
Remote Ping US server location:
[oracle@US admin] $ ping 192.168.188.131
PING 192.168.188.131 (192.168.188.131) 56 (84) bytes of data.
64 bytes from 192.168.188.131: icmp_seq = 1 ttl = 64 time = 0,662 ms
64 bytes from 192.168.188.131: icmp_seq = 2 ttl = 64 time = 0,558 ms
64 bytes from 192.168.188.131: icmp_seq = 3 ttl = 64 time = 0,566 ms
64 bytes from 192.168.188.131: icmp_seq = 4 ttl = 64 time = 0,603 ms
64 bytes from 192.168.188.131: icmp_seq = 5 ttl = 64 time = 0.575 ms
^ C
-192.168.188.131 - ping statistics
5 packets transmitted, 5 received, 0% packet loss, time 4002ms
RTT min/avg/max/leg = 0.558/0.592/0.662/0.048 ms
Details of the server remote localhost:
[oracle@localhost admin] $ more tnsnames.ora
PROD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = EN)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = prod. WORLD)
)
)
PROD_STBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = prod. WORLD)
)
)
[oracle@localhost admin] $ cat/etc/hosts
# Do not remove the next line, or various programs
# requiring a network functionality will fail.
127.0.0.1 localhost.localdomain localhost
: 1 localhost6.localdomain6 localhost6
[oracle@localhost admin] $ cat sysconfig
Networking = yes
NETWORKING_IPV6 = yes
HOSTNAME = localhost.localdomain
[oracle@localhost admin] $ listener.ora more
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = prod. WORLD)
(ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = prod)
)
)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain) (PORT = 1521))
)
(DESCRIPTION =
(ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
)
)
ADR_BASE_LISTENER = / u01/app/oracle
[oracle@localhost admin] $ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 4 February 2014 16:49:36
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1521)))
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start date February 4, 2014 16:42:09
Uptime 0 days 0 h 7 min 26 sec
Draw level off
Security ON: OS Local Authentication
SNMP OFF
Parameter Listener of the /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora file
The listener log file /U01/app/Oracle/diag/tnslsnr/localhost/listener/alert/log.XML
Summary of endpoints listening...
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=localhost.localdomain) (PORT = 1521)))
(DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1521)))
Summary of services...
Service "prod. The WORLD' has 1 instance (s).
Instance "prod", status UNKNOWN, has 1 operation for this service...
The command completed successfully
Location of ping to the server hosting remote localhost:
[oracle@localhost admin] $ ping 192.168.188.130
PING 192.168.188.130 (192.168.188.130) 56 (84) bytes of data.
64 bytes from 192.168.188.130: icmp_seq = 1 ttl = 64 time = 1.57 ms
64 bytes from 192.168.188.130: icmp_seq = 2 ttl = 64 time = 0,223 ms
64 bytes from 192.168.188.130: icmp_seq = 3 ttl = 64 time = 0,577 ms
64 bytes from 192.168.188.130: icmp_seq = 4 ttl = 64 time = 0,571 ms
64 bytes from 192.168.188.130: icmp_seq = 5 ttl = 64 time = 0,568 ms
^ C
-192.168.188.130 - ping statistics
5 packets transmitted, 5 received, 0% packet loss, time 4006ms
RTT min/avg/max/leg = 0.223/0.703/1.578/0.458 ms
Connection database target mode ensures via RMAN:
[oracle@localhost admin] $ rman target sys/oracle_4U@PROD auxiliary sys/oracle_4U@PROD_STBY
Recovery Manager: release 11.2.0.1.0 - Production on Tue Feb 4 16:56:45 2014
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-00554: initialization of the package manager internal collection failed
RMAN-04005: target database error:
ORA-12545: Connect failed because target host or object does not exist
Please let me know the cause of this error and it please help me how can I solve it.
Kind regards
Michel
OK, so you have a software firewall (IPTables) running. By default, it will not be configured to accept connections on port 1521. You have two options...
(1) disable the firewall completely. Run these commands to do this...
stop /etc/init.d/iptables
chkconfig iptables off
The first command stops the service. The second command prevents revived at every restart of the OS.
(2) add an exception to the firewall for port 1521. I'm not a Linux expert, but it should be something like this...
Change the configuration of IPTables with vi...
VI/etc/sysconfig/iptables
Add a new rule as follows...
-A of ENTRY m state - state NEW-m tcp tcp - dport 1521-j ACCEPT Pei
Save and close, and then restart the IPTables service...
/etc/init.d/iptables restart
NOTE: you must always change the name of this server to something other than "localhost".
-
my computer is very slow especially on the startup sound is crackliing and when you watch videos it jumps a little icons often have moved when I start I have norton security and it did an analysis complete and it came with a few things but has not yet sorted
Hello
Try to update norton antivirus defination files and run a full system scan in SafeMode (http://support.microsoft.com/kb/315222).
I hope this helps.
-
Installation fails with "internal error 2502.
I have a client that is running Windows Vista Home Premium (32 bit) and my application setup CVI-built fails with "internal error 2502.
This installation kit has been deployed successfully on hundreds of computers with different versions of Windows, and I never saw it. No device drivers or advanced libraries - just standard execution. I use CVI 9.0.1.
Some old problems with the Office installation, date/time settings etc. of research show very little - but I still found nothing which indicates what means this error.
Ideas or ideas very welcome.
Thank you
Ian
Thank you love. It seems that the problems #2 (permissions) were part of it and possibly other problems linked to the virus. It will re - open this computer from scratch. Detective Conan.
Maybe you are looking for
-
downloaded firefox for Androidtried to add your recommendation lightbeam. message arrives that I need to download Firefox
-
Is he so kind of compression software so that I can post great videos?
Know about to download videos on UTUBE, would like to email friends videos of Atlantic ocean, Apple said mail, file to big to email. Is there a software that will compress the files so can send by e-mail? Compress of hope is the right term. Ask about
-
Windows DVD maker. Menu settings
fact a movie with DVD maker, is possible to set up the menu so you can click to start of the scenes? It seems he did this automatically, AND EVEN ON SOME FREE DVD manufacturers where you can set the time for each scene in menu setting, you must use w
-
Hi all I want to retrieve the list of received calls so I can test that on the Simulator? Is it possible to receive a call on a Simulator? If Yes, please can I know hoe to achieve that? I'm new on this development of Blackberry, I worked on the J2ME,
-
Hello We run 3xWLC controller with 800 AP using ISE 1.2 for authentication wireless 802. 1 x. I was looking in the config of the ISE and notice of 400 edge cheating only 2x2960s are configured with 802. 1 x (ISE RADIUS config) and SNMP and only 2 of