Hyperion Enterprise Reporting error

Similar Questions

• Hyperion financial reporting - error 429 Activex Studio

  
  Hello everyone,

  I recently installed Studio of Hyperion 11.1.2.1 on a Windows 7 64 bit computer financial reports using the stand-alone Installer (FinancialReportingStudio.exe)

  After installation, when you try to launch the client we get the runtime error 429 active x Classic.

  I had this problem before in previous commitments and the solution was to run the utility of configuration on the computer and the error would then disappear.  The problem is that the stand-alone installer does not appear for program installation/install the utility of configuration on the client computer.

  Any suggestions on how to solve the problem?  Already tried to launch only the HRrunant.bat and that did not help.

  Thank you

  Tried two of these ideas and they didn't work.

  We found the question if, we were using the installer of the client 64-bit on a 32-bit computer, which is not very obvious financial reporting studio setup is basically the same for both platforms.  If you use the workspace to download the client installation program it will give you only the version that is on the server, which in our case was the 64-bit Installer.

• Hyperion financial reporting - error

  Hello
  
  I ve installed Essbase & financial reports. When I started financial reports im getting the error CAN NOT CONNECT to THE GSM SERVER SERVERNAME:6800.. _
  
  What is the problem.

  Try to stop everything. Start Shared Services and make sure that it is all the way to the top. Then start the BI database Service. Check the log after starting to ensure that the core service started successfully. You should see a message similar to "Give control to the ORB," which shows that the core service and started correctly GSM. If there are errors, you will need to go back and re - run the config utility. If GSM is on another machine that FR, so make sure that machines can resolve host names used in the configuration tool. I suggest using fully qualified domain name. You should be able to ping the machine: 6800 to ensure.

• HYPERION Interactive Reporting (9.2.1.0.0.637): Error Message [CDATA [AUTHEN_CSSLoginFailed]

  Hi all

  I am working currently on HYPERION Interactive Reporting (Workspace verion = 9.2.1.0.0.637) and this is the problem that I encounter on the portal.

  Please note that the features used to work well until las week.

  I tried to solve this problem with my team of system for more than 10 days, but so far without success.

  I hope someone in this forum can help me.

  When I try to start a task manually in " " "Tools/calendar/manage events ', nothing's going on at the scheduled time. .

  I checked in the log file, and here's what I found in 'server_messages_EventService.log':

  < logger = "com.sqribe.transformer.EventServer event" timestamp = "1425910900023" = thread "ERROR" level = "Worker Thread 3" sequence_no '42466' = > ^ M ""

  < time > 9 March 2015 15:21:40, 023 < / time > ^ M

  < originator_type context = "EventService' originator_name = 'ES1_vh-hyperion0' host ="vh-hyperion0"/ > ^ M

  < message > <. [CDATA [AUTHEN_CSSLoginFailed]] > < / message > ^ M

  < throwable > <! [CDATA [Mar 09 15:21:40.023 ^ M]]

  Failed to connect to native:/ / DN = cn = 6e8ccd3ee7126158:1dd9285:1239f0e3a01:-7fa5, or = People, dc is css, dc = hyperion, dc = com? USER. Error code: 4 Message: user not found with identity = native://DN=cn=6e8ccd3ee7126158:1dd9285:1239f0e3a01:-7fa5, or = People, dc is css, dc = hyperion, dc = com? THE USER ^ M

  com.brio.one.services.authentication.CSSAuthenticationException: connection failed for native://DN=cn=6e8ccd3ee7126158:1dd9285:1239f0e3a01:-7fa5, or = People, dc is css, dc = hyperion, dc = com? USER. Error code: 4 Message: user not found with identity = native://DN=cn=6e8ccd3ee7126158:1dd9285:1239f0e3a01:-7fa5, OU = Peopl

  e, dc = css, dc = hyperion, dc = com? THE USER ^ M

  at com.brio.one.common.utils.CommonIdlUtility.convert (unknown Source) ^ M

  at com.brio.one.common.utils.CommonIdlUtility.convertCorbaException (unknown Source) ^ M

  at com.brio.one.common.utils.CommonIdlUtility.convertCorbaException (unknown Source) ^ M

  at com.brio.one.services.proxy.BusinessServiceProxy.convertCorbaException (unknown Source) ^ M

  at com.brio.one.services.sessionmanager.proxy.SessionManagerProxy.createSession (unknown Source) ^ M

  at com.brio.one.client.impl.ServerClient.createClient (unknown Source) ^ M

  at com.brio.one.client.impl.ServerClient.createSubjectClient (unknown Source) ^ M

  at com.sqribe.transformer.utils.ConversionRoutines.getUserContext (unknown Source) ^ M

  at com.sqribe.transformer.scheduling.STWorkerThread.buildAndSendAsyncJob (unknown Source) ^ M

  at com.sqribe.transformer.scheduling.STWorkerThread.run (unknown Source) ^ M

  [AUTHEN_CSSLoginFailed]: ^ M

  4 ^ M

  , ^ M

  Native://DN=CN=6e8ccd3ee7126158:1dd9285:1239f0e3a01:-7fa5, or = People, dc is css, dc = hyperion, dc = com? THE USER ^ M

  , ^ M

  User not found with identity = native://DN=cn=6e8ccd3ee7126158:1dd9285:1239f0e3a01:-7fa5, or = People, dc is css, dc = hyperion, dc = com? THE USER ^ M

  []] > < / throwable > ^ M

  < / event > ^ M

  ^ M

  < logger = "com.sqribe.transformer.EventServer event" timestamp = "1425910900024" = thread "ERROR" level = "Worker Thread 3" sequence_no '42467' = > ^ M ""

  Thank you very much

  William

  Hello Krishna,

  My team of system replied that they made no change in shared services.

  I hope that we will find a solution.

  Thanks again

  William

• Installation problem: 11.1.2.2.0 Hyperion interactive reporting

  Hello
  
  I try to install Hyperion Interactive Reporting 11.1.2.2.0 on Windows XP 32-bit system.
  
  Below listed files are downloaded:
  
  Foundation:
  http://download.Oracle.com/OTN/Hyperion/11122/Foundation-11122-Win32-part1.zip
  http://download.Oracle.com/OTN/Hyperion/11122/Foundation-11122-Win32-part2.zip
  http://download.Oracle.com/OTN/Hyperion/11122/Foundation-11122-part3.zip
  http://download.Oracle.com/OTN/Hyperion/11122/Foundation-11122-Win32-part4.zip
  
  Creating interactive reports:
  http://download.Oracle.com/OTN/Hyperion/11122/RA-11122-Win32.zip
  http://download.Oracle.com/OTN/Hyperion/11122/OHS-11122-Win32.zip
  
  Extract all the files in a single folder and trying to install.
  The Interactive Reporting tab is not enabled, and the message below is displayed when I click on that.
  
  Reporting and analysis
  Errors:
  Blocker:
  EPMINS-01048: Impossible to install a component selected. See the Troubleshooting Guide for more information
  Status: EPMINS-01016: impossible to install the selected component. Click help to see the possible reasons.
  
  Please help me if I need to download more files, so that I can install interactive reporting.
  
  The need is to upgrade the BRIO reports Hyperion, so this install now.
  
  Thank you
  Suresh.

  Re-installation of the tool, solved my problem.

• Unable to connect error headset/Bluetooth Headset: the pairing attempt failed in an unknown error, is the reported error code: 0x80070005

  Original title: Bluetooth headset not connecting

  I have a Plantronics 9xxBackBeat headset, and I'm trying to connect my laptop (HP Pavilion dv6000)

  However, when pairing the headset I gives me the message
  "Device pairing failed.
  Matching attempt failed in an unknown error, is the reported error code: 0x80070005
  Contact the manufacturer of your device. »
  However, there is no driver for the 9xxBackBeat headphones and when I contacted their support, I'm referred my OS manufacturer, but when I talk about Microsoft, they tell me to go to Plantronics.
  Can someone tell me please how to fix this error?
  If it is not a mistake on the side of Plantronic, and if it's not a mistake on the side of Microsoft Windows, and then what happens?

  Hello

  1. are you able to connect other devices via Bluetooth from your computer?

  2 - is this compatible with your operating system device?

  First thing I suggest you to check the manual and if this device is compatible with your operating system.

  I suggest you try the steps mentioned below and check if it helps.

  Method 1: The problems with Bluetooth devices: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-with-Bluetooth-enabled-devices

  Method 2: If the problem persists, then try to update driver:

  a. click the Start button.
  (b) in the search box type devmgmt.msc and then press ENTER.
  c. Select Bluetooth peripheral device and right click on it.
  d. now, select Update.
  e. restart your computer.

  Method 3: Also I suggest to add as peripheral to your Bluetooth computer and later check the required services running on your computer.

  Set up a Bluetooth device:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Change settings for a Bluetooth compatible device:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-settings-for-a-Bluetooth-enabled-device

  Hope this information is useful.

• (Redirected) Reference Dell Enterprise Reporter

  I'm new on the Forum site.     We are currently testing the Dell Business Reporter tool.    I am a 10 month at a client project, and we have very specific needs, we strive to fill for the customer.    We would like to find someone to customize settings for us in the Enterprise Reporter tool to create 2 different types of reports in Windows 2003 / 2008 mixed Windows file sharing / DFS environment.    We are looking for the following parameters:

  1. List of folders, shares, date of last access on a per-server basis in a specific site.
  2. Another report which includes membership in a group, the group owner (as indicated in the description of the announcement of the Group) and Department of individual users (also from AD).

  My NOTE to the ADMINemail address: Email ID deleted by privacy policy >

  Hi rmharris97,

  Please repost this in the customer center enterprise tech forum for faster assistance.

  http://en.community.Dell.com/TechCenter/enterprise-client/f/

• Technicians in people call Microsoft to fix computer reported errors?

  * Original title: error reports

  Technicians in people call Microsoft to fix computer reported errors?

  Hello

  Thank you for visiting Microsoft Community.

  I suggest you refer to the suggestion of Kosh Vorlon responded on 14 April 2012 from the link below and check if this is useful:

  http://answers.Microsoft.com/en-us/protect/Forum/MSE-protect_scanning/phone-call-scams-claiming-to-be-Microsoft/aefc50a4-d7a4-4c79-8db5-2fafcd6ad196

  Hope this information helps.

  Meet us with the State of the question.

• Calculated in Hyperion Enterprise 6.5.1.1 account number

  Hello

  I created a new account (AB_CD) in Hyperion Enterprise 6.5.1.1.

  I applied the formula (AB_CD = #IJ_KL #EF_GH +) for Member AB_CD, check methods, saved and consolidation.

  Still, but I get 0 for the level zero members and levels parents are to be calculated correctly, when I tried to dig the data.

  Account type, that I used for the account of the creation of AB_CD is "INCOME".

  It would be very useful, if you can able to throw some light on this issue.

  
  

  Kind regards
  

  SRI

  Hello

  I solved it by myself in unlocking LevelZero members in the category and consolidated. It has worked well.

  It's just for more information of others.

  Kind regards

  Sri

• Hyperion interactive reporting

  Hi all

  I have a few question about Hyperion interactive reporting.

  We use the version of the 9.1 IR application in Windows 2003 server and we will migrate the server to Windows 2008. I guess that the IR 9 is not supported in Windows 2008. So, we planned to upgrade the IR to V11. But it seems that IR V11 will be not available after April 30. Reference thread - version the most recent creation of Hyperion interactive reports. (After April 30 THIS year, assuming that Oracle follows political standard, all interactive reporting download files will be removed from all the web sites of Oracle)

  I am confused about what I have to install in the new server. Please could you suggest your ideas.

  Thank you

  Michel K

  I'm not sure that you get the right information from the employee of Oracle on the other thread.

  First support for 11.1.2.x has been extended (in September 2013) lance at April 2018, instead of ending in 2015.  Nothing in the Interactive Reporting statement of direction (from June 2014) is in contradiction with this; in fact, it is said that support IR is linked to the 11.1.2.x Hyperion code base. And IR is still available for download, rather than have disappeared in April.

• Are the "Oracle Hyperion Reporting and Analysis" and "Oracle Hyperion Financial Reporting," one and the same product?

  Are the "Oracle Hyperion Reporting and Analysis" and "Oracle Hyperion Financial Reporting," one and the same product?

  Alanysis and Hyperion reports has a scope of report include Hyperion Finanicial Reporting, web analytics services RA framework and the Foundation as a layer application and client level there EMP Workspace, SmartView etc.

  Thank you

  ~ KKT ~.

• Unable to see Report.trace and Report.error newspapers

  Hi all

  I tried to implement the Report.trace and Report.error check in one of my component, I'm able to see it in the active Sections but its not out there tracking logs display.

  Here's the code I used.

  at the entrance of the file:

  Resource definition:

  resources

  Resources/ampffacontentpublishlistner_trace.htm

  ampffacontentpublishlistner_TracingSections

  10

  Merge rules:

  ampffacontentpublishlistner_TracingSections

  IdcTracingSections

  itsSection

  10

  Def resource file:

  < html >

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 ">"

  < title >

  ampffacontentpublishlistner staticResTable

  < /title >

  < / head >

  < body >

  < ampffacontentpublishlistner_TracingSections @table @ >

  < table border = 1 > < legend > < strong ampffacontentpublishlistner_TracingSections > < / strong > < / legend >

  < b >

  itsSection < td > < table > < td > itsDescription < table > < td > < table > itsDefaultEnabled

  < /tr >

  < b >

  myfacacheclearlistener < td > < table > < td > < table > < td > < table > csTraceMyFACacheClearComponent

  < /tr >

  < /table >

  < @end @ >

  < / body >

  < / html >

  Java code:

  public static String m_strCompTraceSection = "myfacacheclear";

  Report.trace (m_strCompTraceSection, "seizure doFilter" null ");

  Please let me know if any changes need to be made

  Thank you

  Veillon

  I see different section/follow-up in you name are java code and the name of track section configured.

  myfacacheclearlistenercsTraceMyFACacheClearComponent

  public static String m_strCompTraceSection = " " myfacacheclear ";

  Report.trace (m_strCompTraceSection, "seizure doFilter" null ");

  value of the m_strCompTraceSection variable must be = ""myfacacheclearlistener "."

  
  

  You can also check by adding / activating manually ""myfacacheclear "which is in the list of the section."

  
  

  Thank you

  Vikram
  

• Hyperion Financial Reporting-Print Service is not running - put 11.1.2.1

  We use the Hyperion 11.1.2.1 and when I look at my Hyperion Financial Reporting-Print service, it shows me to stop and when I right click to stop/start it the options are grayed out.

  I completely stopped all services of hyperion and them began and now the HFR print service shows me as departure.

  Kindly help me what should I do to solve this problem.

  Hello

  There should be a newspaper available that can give more indication to this problem, not being is not able to connect to the web server en is one of the common issues.
  \FinancialReportingStudio\diagnostics\logs\FinancialReporting\FRPrintLogging.log

  try running the FRRemovePrintServer.cmd the Hyperion Financial reporting - Print serivce deleted successfully and run FRSetupPrintServer.cmd to add

  check if it is releated to the firewall. Make sure that the ports are open.

  Thank you

  ~ KKT ~.

• Unable to change exportfolders value of MBeans for FRConfig.cmd for the Hyperion Financial reporting 11.1.2 version.

  I am not able to change the exportfolders value in MBeans for FRConfig.cmd Hyperion Financial Reporting 11.1.2.

  When I enter the value, it just disappears. I'm missing something here. ?

  I need set the path of export for PDF generation in the Hyperion financial report for lots.

  Edit FRConfig.cmd and update

  
  

  Set EPM_ORACLE_INSTANCE=%MIDDLEWARE_HOME%\user_projects\epmsystem1

  Update epmsystem1 for the name of the correct instance EMP

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Hyperion Financial Reporting of ports for remote access

  Hello
  Can I know what are the ports should I open to allow remote access to the server Hyperion Financial Reporting for reporting via Hyperion Financial Reporting Studio home pc?
  
  
  Thank you

  You could also have a read of http://john-goodwin.blogspot.co.uk/2013/02/financial-reporting-studio-firewall-fun.html

  See you soon

  John
  http://John-Goodwin.blogspot.com/