Hyperlink address get truncated when you create a pdf file of MS Access.

Similar Questions

• Is it possible to reuse the mapping file which was produced to match the FrameMaker styles to RoboHelp when you create a PDF file in RoboHelp?

  I use RoboHelp 11 to produce WebHelp. The documentation has been previously written in FrameMaker and published in PDF format, but he suffered many outings since then. I am now prompted to create the help PDF and WebHelp. Not really a problem except that the help format doesn't look particularly good in PDF format (not designed for two).

  Ideally, I would just use the mapping file to the original frame to the RoboHelp conversion in sense (with some editing) reverse - to convert RoboHelp styles in original FrameMaker formats when I create the PDF, however, A) there doesn't seem to be an option for that and B) originally FrameMaker in RoboHelp map file does not seem have been kept after this conversion.  He's here and I'm just not see it?

  If necessary I can just create a different CSS to redefine the styles, but if I don't, I rather not.

  I think that even if you can't find mapping information (pass to know where) it would just tell you A Style on the Fm band has been mapped to the B Style in HR but gives you no information on how Style has been set on the Fm band.

  I think your only options are to create a CSS that suggest you or, as I would create, redefine the model of mapping of the Word Style on. By going to the first word, you can change the output for page breaks better and other tweaking you may want.

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• When you create interactive PDF files in InDesign, buttons are down in the DC / Acrobat Reader

  Hello Acrobat Forum:

  I create an interactive e-book PDF I get incompatible with questions. I spent a lot of time trying to solve it, and I still have to find a solution. I have some configuration of navigation on a master page that I need to change the page level. These buttons should have a reverse effect, so the bearings must exchange. Most of the time these works. It is the 25% of the time this is a problem. And when there is a problem, they are not displayed. The final PDF is created an InDesign book with 5-6 papers in it. It has 6 layers with the top layer of mostly unprintable.

  That's what I tried:

  • Made sure all the layers in the ID book are exactly the same.
  • Handset of all horizons for the navigation and buttons on the same layer.
  • Exported with only the layer of activated navigation. This fixed the problem with the navigation, but once all the other elements have been added the problem came back.
  • Changed order of the layers. Same result with the loss of elements.
  • Excerpt from the page with the fall as they appear and buttons. As soon as I replace the page with this page the complete document, they give up.

  I use the latest version of InDesign (version 2015.4) and DC Acrobat (version 2015.017.20053).

  I have many more of these books, it is imperative that I find a solution in the future.

  Thank you.

  Scott Silva

  Nashua NH

  After much trial and error trying to figure this issue out, I came up with the solution that solved my problem. The issue has to do with the designation of the buttons. Most of the buttons were on master pages. But some pages have a different look on some pages. So I turn on the master page to the page level button. Once this happened, he changed the name of the button. Because I'm using the function "Export to the book in PDF format", where this has been done in other ID files in the book, there was conflict in the naming of the buttons. Once I renamed the buttons with a unique name, they came on the page.

• When you create a PDF from a scanner, is there a way to set the default value for the size of 8.5 x 11 letter custom every time I make a PDF from a scanner?

  When you create a PDF from a scanner, is there a way to set the default value for the size of 8.5 x 11 letter custom every time I make a PDF from a scanner?

  Hi kevin7frg,

  You can go to "file > create > scanner > configure presets PDF»

  The dialog box that appears, you can choose 8.5 X 11 as the default width and height of PDF pages to scan.

  

  Hope that helps.

  Kind regards

  Ana Maria

• How can I get rid of the excess columns when you convert a pdf file to excel?

  How can you get rid of the excess columns when you convert a pdf file to excel? How can you get rid of the excess columns when you convert a pdf file to excel?

  Hi carlk91869849,

  Once a file is converted to excel format, you can select the columns and press the delete button to delete their data.

  If I misinterpreted your question, I would ask to provide more details.

  Kind regards

  Rahul

• When you create a PDF to ppt, pdf can be created in unique pages instead of a complete document

  When you create a PDF to ppt, pdf can be created in unique pages instead of a complete document?

  After Acrobat create a PDF from multiple pages, you can use the Extract command to break into single pages. You can do this either in tools > Pages, or in the Options menu for the Page thumbnails pane.

• 'disk error' when you open the pdf file

  Hello, lately I'm having this problem with Photoshop CC:

  When you open a pdf file I get the message: "could not complete your request because of a disk error."

  What is the best way to get rid of the problem?

  Thank you

  I had the same problem.

  I solved it to manually restore default preference files.

  https://helpx.Adobe.com/Photoshop/using/preferences.html

• Political image when I create a PDF file: warn and continue does not work

  Hello!

  I need to create a PDF file with many images, and I need to know if all this image is low-resolution (< 300 dpi). I tried to use the policy of the image in the PDF settings but it does not work, because if I choose "Warn and continue" (if the resolution of an image is < 300 ppi, warn and continue), the program creates the PDF file but do not get hot me and I see no message... and I'm sure there are bad pictures because I wrote a check to test with 72 dpi images.

  Thank you very much for your attention,

  Best regards!

  (Sorry if my English is not as good as it would be)

  You can use the preflight in Acrobat.

• Properties of C301a are not open when you print a PDF file

  My printer was working fine but suddenly the properties will not open when printing a PDF file.

  Hey @MtVernon1910,

  I have to recommend at this stage that contact you support backup of lizard for further assistance if you have purchased the full version of the Lizard Safeguard software.

  LockLizard - Support

  However, if you use the free to Lizard Safeguard PDF Viewer you are not eligible for the support of Lizard Safeguard and need to contact the site where you download the abandoned coat pattern to go would either have them allow you to download and view a PDF through Adobe unsecured. Or try a different file such as JPEG or TIFF type to print.

  If the Properties window does not appear in the Lizard Safeguard software and you need to change the printing preferences, you can:

  1. Click on the start menu
  2. Select "devices and printers".
  3. Right click on your printer C309a and left click on 'Print Options' to change your settings.
  4. Once your settings, open your PDF in lizard backup and when you print it to remember the parameters that you set under printing options. Once the print job is completed, return to the devices and printers, and open your new product printing preferences to restore everything to the way it was before you print the PDF file.

  If the problem is that the print dialog box does not open for you, try hitting Ctrl + P your keyboard at the same time and should prompt the print dialog window to open.

  Good luck!

• The application was unable to start correctly (0xc0000005) - keep from appearing when you open a pdf file. How can I stop this?

  I'm on a 64-bit Windows 7 Pro computer and just upgraded to the most recent Adobe Acrobat Reader DC.  When I open a PDF file a window opens saying "the application could not start (0xc0000005).  Click OK to close this application"I click OK and the window opens up again about three or four times before it finally stopped.  My PDF file is then visible.  This is driving me crazy!  I tried to use "Repair Installation" in the Menu Help, but it has no effect.  I downloaded and installed the latest update - and this miserable message keeps popping up!  Before you do a system restore to revert to the previous version, can someone please tell me how to solve this problem?  Thank you very much.

  Hello

  There might be a chance of the previous version left overs. Try uninstalling Acrobat using cleaning tool: http://labs.adobe.com/downloads/acrobatcleaner.html

  Then try to reinstall it and then see if that solves the problem.

  Concerning

  Sukrit diallo

• Disabling of processing Pages when you open a PDF file

  I have Acrobat X and recently when I open some PDF files from my hard drive or a website it starts pages, treatment which is annoying and takes forever. I think it started after installing Adobe Air but I removed that program and it always does. Does anyone know how to disable this? Here is a screenshot of the treatment. Thank you!

  

  In your Acrobat preferences, disable accessibility - but actually, after checking, I think that it is some of these reading order options. It's been a while since I've seen comments on this process and give me an answer to the best of my memory.

• RGB color values change when I create a PDF file in Indesign

  Hi I have a night Mare, please please please help me.

  I design a lot of websites in Indesign, export to PDF and then slice and dice the pdf in Pshop, while coding I'm going.

  I just upgraded to CS5 and seem to have a nightmare when I export my drawings in PDF format. When I open the PDF file in Acrobat or Pshop RGB color values are always different from what they were in Indesign (only subtly). I tried all the options and settings I can think when I make a PDF, but still the color values are different in the final PDF file.

  Why this keep happening, this settings, I have set before you make the PDF to ensure my RGB color values remain the same.

  I use Acrobat 7 Professional.

  Do not include the profiles. You have a problem of current color management (workspaces probably not synchronized). If there is no profile, the opeing application will ask what it is or take the current work profile, which is what you want, if the numbers must be preserved.

• Acrobat Pro DC freezes when creating a PDF from the Clipboard and gives an error message when you create a pdf from Microsoft Word 2016.

  Two weeks ago I have upgraded to Adobe Acrobat Pro since Acrobat Pro XI DC. Create a PDF from Clipboard in appearance from a status bar results, lessons for 25%, at which point Acrobat "freezes" "." " Similarly, when using the feature to create a file PDF in Microsoft Word 2016, a progress bar appears, gets to 25%, then the error message "Microsoft Word has stopped working", restart Word, and a message recommending that the Acrobat Add-in is disabled. I'm on Windows x 64 on a Lenovo X 1 carbon 10. Is there a "fix" to these questions?

  The word problem seems more likely to have a bug introduced by Microsoft in their last update for Word 2016, a couple of weeks. Someone posted a way to get Word to revert to a version:

  To revert to a version earlier office 2013 or 2016 Office in the form of installation of Office 365, you must use a command line and specify the build number, that you want to return.

  1. As Office 365 facilities are automatically updated in the background, you must disable the automatic updates first. This can be done in any application Office 365 via:
     File-> Office account-> Update Options-> disable updates
  2. Open a command prompt:
     1. Start-> type:cmd
     2. Click on: command prompt
     3. Choose: Run as administrator
     4. Provide your credentials to the administrator or to confirm the user account control dialog box when you are prompted.
  3. Type the command below that applies to your version of Office or Windows
     • Office 2016
       cd %programfiles%\Common Files\Microsoft Shared\ClickToRun\
     • 2013 office under Windows 32-bit
       cd %programfiles%\Microsoft Office 15\ClientX86\
     • 2013 desktop on 64-bit Windows
       cd %programfiles%\Microsoft Office 15\ClientX64\
  4. You can specify the number of bed to regain in the following way:
     officec2rclient.exe /update user updatetoversion=
     • Replace with the build number that you want to return. There is a preview of version numbers, you can return to the Office 2013 and 2016 Office.
     • Example to return to the release of January 2016 office:
       OfficeC2RClient.exe /update user updatetoversion=16.0.6366.2062
     • Example to return to the release of January 2013 office:
       OfficeC2RClient.exe /update user updatetoversion=15.0.4787.1002

• How can I keep my visible background layer when you create a GIF file in Adobe Photoshop elements 11?

  I am trying to create a GIF in Adobe Photoshop elements 11.  To give you the objective of the final result - I am trying to create the illusion of dog legs walking on a yellow background.  Each image individual leg is a separate layer on the yellow background.  I want my background layer to ALWAYS show during the animation.  In ADDITION, I want each paw image to stay on the yellow background that he hosts (if possible).  Here are the steps that I took:

  1. I have my background layer (yellow background)
  2. I layered all the other images on the top (8 paw print images)
  3. I placed these images where I want them on the background layer

  I know that to create a GIF file, I go to 'Save the image for the web', select GIF and click "animate".  The problem is when I preview the animation, it's a single image at a time, instead of the overlay and keeping them on the screen as the animation progresses.

  At the very least, I want the yellow background to show during the animation.  I can live with that if the paw prints don't stay on ;-)

  I would appreciate any insight/help!  Thank you!

  I think that you need to merge each layer with your yellow background, and then try again the gif.

  In other words, put the yellow background under each layer and merge the top layer with the yellow background.

• Illustrator crashes when you create a new file/open a file on Windows 10

  My Illustrator startups very well at first, but when I try to create a new file or open a file, Illustrator crashes. Windows says that Illustrator has stopped working.

  I use Windows 10 on Microsoft Surface Pro 3. I tried to disable GPU performance, but it still does not work. I have also uninstalled and reinstalled the application, does not work either. It worked great when I was with her at the end of February. My latest version of Illustrator is 19.2.1 (64-bit).

  Thank you very much!

  Pradthana

  is a printer installed and turned on?