hyperthreading (HT) in vSphere with Nehalem Xeon 5500 and their effect on the number of vCPU

Similar Questions

• Invalid product key, left my computer with a black screen and a cursor of the mouse on the boot.

  A few days ago, I tried to upgrade Windows 7 Home Premium (64 bit) to Windows 10 using the free update. Installation hung at 84% for 2 hours, then restarted, was unable to recover the installation and then could not get back to Win 7. This left us with a black screen and a cursor of the mouse on the boot. The computer would remain in this State for about 10 minutes and then reboot and repeat.

  Fortunately, or so I thought, I had a few CD Windows installation backup from the back to the era of digital river. So I thought I'd install fresh on my empty partition, copy my files and data, and then format the partition with the installation broken on.

  I did, but now he tells me that my product key is not valid and cannot be activated. The product key came on a real label on the PC when we bought it.

  The key is for X 16-96072. I installed X 17-58997 (Windows 7 Home Premium x 64 with SP1 (u)). I don't know what is the problem with the key? Should I have installed without the (u)?

  One key 25 digits grouped in 5 sequences of 5 characters not X 17-58997.

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to the desktop -http://go.microsoft.com/fwlink/?linkid=52012 )
  Once downloaded, run the tool.
  Click on the button continue, after a short time, continue button will change to a copy button.
  Click the copy button in the tool (ignore the error at this stage) and then paste (with r-click and paste or Ctrl + V) in your message.

• Problems with WiFi from Toshiba and their lack of support - you're not alone

  For those of you out there problems with WiFi on a Toshiba laptop, you're certainly not alone.

  Over the past years, I have noticed a growing number of different brands and models of computers laptop toshiba and laptops with the same problem.
  Last year, 100% of the toshibas that came in my workshop have had this problem, it is about 75% of the laptops that I fixed.

  These models have all hardware wifi (Agere, Intel and Realtek)

  The wifi switch is on, on the same computer, some programs to detect as being market, others see it as extinct.
  What, it doesn't connect to a same wireless router when used to.

  Responses of toshiba were the usual non-professional form response from: it must be the router, try to flip the switch, you have updated the bios?, update the drivers et al.

  It is a software problem, and given the number of people on this forum talking about the same issue, it's a great.

  Often, I came across the issue of windows for communication services wireless disabled by software of Toshiba and I believe, that it is a conflict between tosh software and various other (zone alarm, windows and al.)

  In some cases, the software seems to intervene and to corrupt the OS from windows drivers and interfere with their implementation and enforcement, which is worrying, the software doesn't have to touch all areas. (if not, what is the point of a BONE in layers)

  I sometimes managed to force to work (for example manually restart the services), but these solutions are not a "clean way" of doing things.

  The most reliable way to solve this problem seems to be, backup your data and reformat back to the manufacturer's specifications, and then immediately uninstall the software from toshiba and update the drivers terribly old (even those on the site are about one year more up-to-date for the model I'm working currently on.) Unfortunately most of my clients is companies that need a LOT of data stored in different saved locations, then a ton of programs specialized to be reinstalled, which is slow and costly.

  Message from TOSHIBA:
  Please make it a sticky in this forum for all the REAL solutions, not one of the threads that I watched with your suggestions has been resolved.

  If there is little no support for your products in this regard, I will contact the ACCC, choices, and associations of trade fair with an open letter that I ask all customers affected to sign, and I will put a national call for people with the same problem to come forward.

  I would like to ask also if you encounter a problem where your wifi stopped working and it does not detect or work, please just post "bump" under here so that we can keep way reasonably clutter free.

  I used to recommend Toshiba and Asus for laptops, now, this list is one.

  Greetings from the Australia (aus site sent me here for the forums)

  Damien Holley

  +@lonetraider+
  You can do what you want but as mentioned above; WiFi problems are not specific to a laptop manufactures, you'll notice WLan issues on computers (laptops, desktops computers) all manufactured products.
  I had 4 different books of four various manufacturers and ALL had problems of WiFi, but most problems could be solved by the driver update, change, or reset of the router are.

• WHATS WRONG WITH WINDOW 7 (camera and scanner Wizard is the last straw that made my VERY loyal windows back)!

  Why are you people FORCING me to go apple?
  I was a supporter of the EXTREME of windows from the day I started working with computers until 17:59 today!
  I have jperchased a new laptop a month for our company. It came with WINDOWS 7. I plugged in our digital camera today a WIZARD of SCANNER & CAMERA No. found? UH... "It's funny," I thought I went to see what was not configured right. AFTER 6 HOURS. I came to the conclusion that windows FAIR BAD! Under XP I could plug in the camera, one an Assistant came...   He asked "WHAT" can they DO YOU LIKE US... Copying photos to my computer using assistant camera and scanner window was my answer... AND BAMMM, WE WENT!  It seems NOW I MUST IMPORT EACH PHOTO ON MY $ GB SD CARD that IS IN THE CAMERA... NOT TO CHOOSE WHAT I WANT TO IMPORT! I CALLED WINDOW AND THEY WANT THE SAME MONEY OF ME TALKING ON THE PHONE! THE $ LAPTOPS AND DESKTOPS % WE HAVE OWNED IN THE LAST * YEARS WASN'T ENOUGH!   I WILL NOT BUY! WINDOWS ANYTHING NEVER NEVER NEVER NEVER IF I DON'T GET THIS TREATY! I (AS WELL AS THE OWNERS OF WINDOWS OF MOSE) DO NOT DESERVE TO HAVE OUR LOYALTY SHOT LIKE THAT!  E-mail address is removed from the privacy * if someone WANTS TO HELP. It IS on February 16, 2010... IF I can NOT GET this SOLVED BY 01/03/2010 I sell all our computers and apple FULL ON more I take 2 working days and to picket of the Redmond Office with my colleagues and my very good friend Steven Swartz since the San Francisco Chronicle!

  I wanted to say something but decided against him.

  CARI you are incredibly patient.

  Well I've changed my mind again.

  If you download say Live Photo gallery (free), it will be one of the options that is available to your device picture is connected (I have a Canon SD 750)

  Select Import with Windows Live Photo Gallery and it will allow you to choose what to import.

  http://download.live.com/Photogallery

  Due to several suites of law (EU) Microsoft was forced to leave out some old features, but most can be obtained by download.

• How can I get 13 Organizer to show digital photos that I import, as thumbnails instead of an icon which looks like a piece of paper with a folded corner and a tear to the bottom?

  I have PSE 13 V13.1 and I use an iMac (2.7 Ghz Intel Core i5 with 8G of memory). I analyze my color of medium format (6 cmX6cm) negative at my scanner Epson Perfection Photo V550 and save them in a file on my iMac. Then I import the photos to the Organizer to help either import or get photos and videos of files and folders. Pictures (jpeg format) are imported, but appear as icons instead of photos.  If I pass them to the editor, I can see the photos, but once I have edit them and save in the Organizer, they appear as icons.

  This only seems to happen with this negative size.  When I do the same process with negative 6cmX 4.5 cm, the thumbnails in the menu Organizer are pictures.

  If someone can help me with this problem I'd of course appreciate it.  Then I could go back to restore my old photos.

  See:

  Photoshop elements help | Limits of maximum size of the image in Photoshop Elements

• The emails that I receive with an attachment to reproduce in the message space and also to double the number of attachments.

  In other words, if the sender wrote a paragraph, the paragraph is displayed, then a line, then another copy of the same exact text. The attachment, it is usually a Word file, is listed as two attachments, even if the sender has sent only one attachment. One of the accessories is corrupt and will not open. I have to click 'save file' and save them both in my downloads folder, it asks me first "nameoffile.doc already exists. Do you want to replace? "When I do that, it records the non-corrupt file. I tried to remove the mimesType.rdf but that had no effect on this problem. It's boring. Any help you could provide would be much appreciated.

  The problem of email with a Word attachment or .pdf in question, but seems to be fixed after compacting my Inbox and all the files inside. Thank you!

• How to control a VI (with a while loop and a structure of the event) from an another VI

  Hello

  I have the main VI which I want to be driven from an another VI. But I can't do that and I don't know what is happening.

  For example: VI main, I have a while loop with a structure of the event, there is a Boolean controller controlling a Boolean LED, which is inside the structure of the event. And the other VI, there is just a Boolean controller and functions of applications to open the main VI.

  How can I control the Boolean LED in VI main, changing the State of the Boolean controller in an another VI?

  Thank you.

  There are different options, but depending on what you want to do. For this example I can't give you a specific solution.

  I do not understand why you do what you do. Why do you call your 'principle VI' dynamically? What is the advantage to do? There are also other ways to call a VI dynamically, based on real cases (for example the method "call and forget", etc...).

  In you principle VI, control you Boolean ("THATCHER") is not the case of corresponding event. This is not usually a good practice, keep it inside.

  Also, why you try to communicate with the caller and callee VI through such a way to twist? There are better ways to do it.

  In one of my projects, I use the user event to launch orders in case of case of appellant VI.

  some Associates more readings for you:

  http://www.notatamelion.com/2015/03/23/how-to-make-dynamic-subvis/

  http://forums.NI.com/T5/LabVIEW/Dr-Damien-s-development-event-structures-III-communicating-with/m-p/...

• With both internal customers and external view of the Horizon, I do * have * to have at least a connection to the server by type of connection?

  If I want both external and non - VPN and LAN users internal to access desktops from view, I need to have a connection to the server dedicated to external users and another for internal? Right now I have one pair of Security Server-connection to the server and external connections work fine, but the internal connections are not. I have to get up at least a connection replication server and change the URL HTTPS Secure Tunnel for internal users only?

  Apparently, you don't need a connection to the server dedicated to internal users if you also external users and a security server. I found this during my troubleshooting. The URL of security server will be configured as administrator mode that external URL can be resolved and accessible while the URL to connect to the server will be configured with a URL can be resolved internally and is accessible in administrator mode.

• How to add an image that will be displayed with your site URL and a description of the site?

  Therefore, when you post a link to a Web site like Facebook, etc, your site description appears automatically with the link. I wonder how make an image pop up as well. I want to just my logo to appear alongside my URL and site description. How do you do that in Adobe Muse?

  For the purpose of using labels Opengraph, consult a similar thread here - http://forums.adobe.com/thread/1182849.

  Thank you

  Vinayak

• With only no load and no response from the key enter

  My phone does not have a charge.  Loss of power even when not in service.  Also the button to change the screens is not as responsive or doesn't work at all.

  Take a look at this for a few troubleshooting suggestions.

  If your iPhone, iPad or iPod touch won't charge - Apple Support

  This can give a try to the question of the responsiveness of the button. I know you need the button to do it, but give it a try.

  Try a forced reboot. No data is lost during this procedure. Hold on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen.

  If the device still won't hold a charge, you should make an appointment at the Apple Store and ask them to evaluate the device for you.

• Whenever I try to watch AOL reports with video, it freezes and will not play the video.

  He repeats to me a script runs and said script runs. Any box I check Stop, run, continue to keep it just frozen. It seems that this started when I updated to Firefox.

  Please try this

  Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• I have the strength of the weak signal with my wireless router and I did all the things recommended to ensure good reception but no luck what can I do?

  It's a my router belkin54G
  Things ive not tried no metal of any kind anywhere around my connection
  No cordless or cellular phones around not even on the same floor
  my firewall on my computer is turned off and the system has been set up to work together, but I still have a bad connection

  Hello

  1 Windows operating system you are using?

  2. did you of recent changes on the system?

  You can read the following article and check if it helps.

  Why the my wireless signal strength is so low?

  Troubleshoot low wireless signal quality

  You can also read the following article and check if it helps.

  Windows wireless and wired network connection problems

  Hope this information is useful.

• I get the error code 646 with Windows Update KB976321 and KB980470, I searched the forums and tried a number of bugs without success.

  I tried all the suggestions here:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/5ba765e1-5771-4fb9-949f-31dd13ceb1d5?Prof=required

  I have reset the components windows update manually from the link:http://support.microsoft.com/kb/971058

  I tried to install the updates manually after putting the computer in a clean boot.

  I tried to download and install the updates manually, but these two updates must be installed through Microsoft update and Microsoft update gives me error 646.

  I am slot as Vista Home Premium 64-bit Service Pack 2.

  New or different suggestions would be greatly appreciated.

  Thank you!

  Tony.

  Microsoft support advised me to temporarily disable (UAC) user account control.

  Which has worked and updates installed normally.

  Tony.

• How can I build with precision for horizontal and vertical display on the versions of the tablet or phone

  I am trying to build the version of the tablet of my site, but when I test in preview horizontally the vertical display is out of wack & vice versa (super frustrating). I am at a loss, and I didn't even to the version of the phone. Also is it a better platform look another overview which simulates the tablets & phones, because you can not display in the browser accurately?

  I am at a loss.

  Hello

  The best way to get an overview of the site on devices (tablets and telephone) is to publish a temporary site in Business catalyst and the generated link will show the output on various devices.

  Publish site temp in Muse, please go to file > publish to Business catalyst. Please check the following URL for more details.

  https://helpx.Adobe.com/Muse/using/publishing-websites.html#id_83339

  Concerning

  Vivek

• Problems with Close - save changes and save it in the Formats

  Hi, I recently started having a problem saving files imported from a Scanner. At present if I import a document, then click on save to Jpeg format by default, but if I click on Close followed by Yes at the prompt screen asking me if I want to save the changes you made the window save under opens and has default PSD? Until a few days ago, that this would also default to the Jpeg format. Even if I change to JPEG, after close / save as option next time I close a default file to PSD. How can I do this by default in Jpeg format again?

  I also noticed that Save As offers 20 different file formats so that close / save as 16. Don't know if it's related or if it was like this before I started to have the Jpeg / PSD out.
  

  Morning Sudarshan, first of all thanks for all the time & help; After being up most of the night I finally managed to solve the problem.

  Here is a summary of what I did: -.

  1. Uninstall Photoshop

  2 uninstalled all adobe products

  3 downloaded Microsoft ProgramInstallUninstall and ran - I had to do it like some adobe products (air / drive X / community help) won't work via Add / Remove?

  4 Ran Adobe CS cleanser & selected all

  5 used Windows search option including hidden files & folders to search for CS5 / adobe / photoshop - deleted all files

  6 downloaded unlocker and used on all files that cannot be deleted in point 5 - access is denied or if there is a lot that were locked. Strange that all the adobe programs deleted so don't know why it would be.

  7 back up the registry

  8 differet Ran 4 - due registry cleaners repeat each some time before any mistakes / problems.

  9. now the risky part - used RegEdit registry opened manually and remove all references to Adobe Photoshop &. There were loads absolutely!

  10. restarted - fortunately no problem - I was expecting some considering my registry changes.

  11 re - install CS5

  WORKED :-)

  I assumed that either an entry in a locked file or something in the registry was causing the problem that what precedes is resolved.