With both internal customers and external view of the Horizon, I do * have * to have at least a connection to the server by type of connection?

Similar Questions

• Display both internal users and external v5.0

  Hello

  I have an evironment of configuration using view 5 for internal users using PCOIP (about 500).  I want to enable some of these users access to a virtual computer from outside the workplace.  Currently I only use 1 connection to the server.  I can use this connection to the server to enable PCOIP internal and external / RDP connections or I need to connect 2 servers, one for internal and an external?  I'm just trying to understand how it fits into the picture, I intend on using a security server.  If explained elsewhere then please point me to it, but I tried to search.

  Thank you.

  Depends on how they access, most of the cases you need an another view connection to the server that is configured for PCoIP tunneling and external URL is what your users will connect from the outside.

  Its really easy to install, install another (choose the replica), highlight the original, then you configure the settings above and you're done.

  Linjo

• Brewing between internal memory and external memory SD card

  The Sansa Clip + shuffle between songs on the internal memory and the external memory SD card; or are they seen as different to play songs stored on the internal and external SD card? I have 4 GB Clip + with a 8 GB external SD card. What total 12 GB? Or should I spend inside out manually to hear the songs loaded on the external SD card?

  dohar9 wrote:

  The Sansa Clip + shuffle between songs on the internal memory and external memory SD card?

  Yes.

  I have 4 GB Clip + with a 8 GB external SD card. What total 12 GB?

  In theory, Yes. In actual practice, but it will be probably closer to 10.75 to 11FR.

  Or should I spend inside out manually to hear the songs loaded on the external SD card?

  N ° the player will play seamlessly two memory slots when you use the random mode.

• Internal network and external network.

  Hello

  I want to use hyper-V to VMware workstation. I have a problem with that. I have 2 virtual machines, a server and a workstation. The server must be a router to an external network (internet) for the workstation.

  The server will be DNS, DHCP service and transfer to the workstation.

  In Hyper-V, it is easy, the server gets two NICS, one (internet) outside another internal. The workstation only an internal NIC work stations now takes an IP address from the dhcp on the server.

  When I try this with VMware, the workstation does not take into account server and get an address IP of VMware. Is it possible to change this, can VMware act here, as does Hyper-v?

  I thank the of for aid, Pit

  For the internal network, you can use the host only on VMware Workstation's network, and for do not receive not IP address of the DHCP server on VMware Workstation, you can disable the DHCP for the host only to a network using the virtual network Editor, see: VMware KB: using the VMware Workstation virtual network editor

• Windows Media Center does not work on both my XP and Vista computer. The two events lastnight

  Windows Media Center does not work on both my XP and Vista computer. The two events lastnight

  Hello

  For someone to really help him, it is important to give as much information as possible.

  You say "my computer XP and Vista" are this one computer dual boot with XP and Vista, or is - the two computers 'single '?

  If it happened "yesterday" did you updated anything or whatever installed?

  Having only happened yesterday have you tried a "System Restore" to see if this corrects the problem?

  What TV card are you using and have you verified that this works correctly?

  If you get not a photo is the antenna in place properly?

  Do you get any error messages? More information, you can provide more someone will be able to help John Barnett MVP: Associate Expert Windows XP: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ;

• Reset Windows Picture and FAX viewer as the default value for jpeg files after loading of Corel

  I put Windows Picture and FAX Viewer by default to open jpeg, tiff and other pictures, so it appeared as an option in the drop-down list to view attachments that have been downloaded. After loading the software Corel Draw, it is now the only option to open photo files even if Windows Picture and FAX viewer is always defined as the default value. How to restore Windows Picture and FAX Viewer as a choice?

  Have you looked into the Corel software preferences to see if you can cancel these associations?

  There is usually backup keys are created in order to return to the previously used application.

• Invalid product key, left my computer with a black screen and a cursor of the mouse on the boot.

  A few days ago, I tried to upgrade Windows 7 Home Premium (64 bit) to Windows 10 using the free update. Installation hung at 84% for 2 hours, then restarted, was unable to recover the installation and then could not get back to Win 7. This left us with a black screen and a cursor of the mouse on the boot. The computer would remain in this State for about 10 minutes and then reboot and repeat.

  Fortunately, or so I thought, I had a few CD Windows installation backup from the back to the era of digital river. So I thought I'd install fresh on my empty partition, copy my files and data, and then format the partition with the installation broken on.

  I did, but now he tells me that my product key is not valid and cannot be activated. The product key came on a real label on the PC when we bought it.

  The key is for X 16-96072. I installed X 17-58997 (Windows 7 Home Premium x 64 with SP1 (u)). I don't know what is the problem with the key? Should I have installed without the (u)?

  One key 25 digits grouped in 5 sequences of 5 characters not X 17-58997.

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to the desktop -http://go.microsoft.com/fwlink/?linkid=52012 )
  Once downloaded, run the tool.
  Click on the button continue, after a short time, continue button will change to a copy button.
  Click the copy button in the tool (ignore the error at this stage) and then paste (with r-click and paste or Ctrl + V) in your message.

• I have a problem with activating photoshop elements 14 upon activation of the server responses me that I am not bound. I start again and I still got the same message! I use a pc with windows 10 pro

  No response to my problem

  Amy_Wong

  I have a problem with activating photoshop elements 14 upon activation of the server responses me that I am not bound. I start again and I still got the same message!

  !

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite.

• MAB with ACS (internal store) and 802. 1 X with Active Directory (external store)

  Hello

  at the moment we´re using ACS MAB. Every Mac are stored as internal hosts on GBA. I want to migrate to 802. 1 X.

  Users have AD. During the migration, I need MAB and 802. 1. X is it possible to use the database internally and externally at the same time to the

  same access strategy?

  Concerning

  Horst

  Hello Horst-

  Yes, you can do this by creating an "identity" store sequence and fix the two AD and the data store is internal to it. Take a look at the link below:

  https://supportforums.Cisco.com/document/103901/ACS-5x-identity-store-sequence

  Thank you for evaluating useful messages!

• Backup hard drives internal and external to separate the partitions on an external drive of a second... ?

  I want to back up an internal hard drive (let's call it 'A') and (B) external drive using Time Machine. Both are 1 TB in size, so I bought a 2 TB external drive and created two partitions (C and D) on this subject, only to receive each backup. So:

  A = internal hard drive

  B = external drive (for "overflow" files)

  C = partition to external drive for backups of A

  D = partition to external drive for backups of B

  My question is, can I set up Time Machine so that A back up C, every time the 2 TB drive is connected, and B backup up to D whenever the two external drives are connected? I thought it would be possible, but at the opening of the Time Machine preferences and selecting D for the first time I get a message saying:

  "You want to stop backup up to 'C' and use"D"instead or back up at the same time?

  If you use the two, Time Machine will take turns backup up to "C" and "D". »

  I wonder if it would just be easier to return to a single partition on the hard disk of 2 TB and have the time machine to perform a backup of everything, that is, both A and B?

  Last question: I'm doing this to improve Yosemite to El Capitan. the operating system affect what I'm trying to get time Machine to do?

  Thank you!

  Use Time Machine to back up or restore your Mac - Apple Support

  I have a non-partitioned device TM backup of your data and your OS disk at once

  If in case you partition and drive "B" needs more than what is on the partition and drive 'A' don't you avoid warning.

  update of the OS is fine, as it will give an output back to a previous TM operating system where you need it, but it is compatible across versions.

• Wyse V10L with WTS 6.3 and VMware View show

  Hi, just got the WTS 6.3 Wyse today and upgraded a V10L. Then entered the IP of our server VMware View, that meets our OK thin client device and presents us with a nice box of connection of VMware. I then enter my login details and I get the error "No. SUPPORT TUNNEL '...

  I can plug directly into the virtual machine in question using RDP in Wyse client, so assume its something to do with the SSL through the broker. Disabled the requirement for SSL and changed my broker on the device of Wyse http://x.x.x.x, (instead of https)-same error.

  Has anyone else seen elsewhere, or have any idea what is the problem?

  Hello

  Open the view administrator, select your display server, click on edit and activate (direct connection on the desktop)

  This is because the customer of Wyse ThinOS with does not have components of tunneling.

  You will need the option direct conect. The thin client connects to the Server View, authenticated, get its information session and after which connects via RDP directly on the desktop.

  Thank you

  Christoph

• Using the function tablet and external monitor at the same time

  Hello

  I was hoping with the docking station and the external monitor, I can work as with an ordinary computer and at the same time to use the computer screen Tablet laptop to take notes with Journal (extended desktop display).

  Unfortunately, when I touch the screen with the stylus, it is still planned for the external monitor - no matter what I set as main display it seems just really stupid.

  Does anyone have an idea how to prevent this?

  divB

  I've updated to the latest official drivers from the Wacom homepage (not Lenovo-, they are old!) and it seems to work!

  I hope he'll stay until now.

• Acrobat Pro DC and 365 customers shared SharePoint insiders, but the server does not not to the evaluators

  The basics:

  Windows 7 (64-bit)

  Acrobat Pro DC (to organize shared reviews)

  SharePoint Office 365 (to accommodate the shared review)

  Acrobat Pro XI (for customers who try to read shared review)

  I've implemented a subweb on our server SharePoint 365 following all the instructions provided in this article:

  Accommodation of the shared reviews on sites SharePoint or Office 365 with Acrobat

  My colleagues receive permissions change for the SharePoint site, subsite, and a document library dedicated "SharedView."

  I opened a PDF file for shared review using Acrobat Pro DC and invited two colleagues to review; time with a link and once with an attachment.

  I am able to add comments to the file and discovered the Tracker review, get updates, etc, and everything seems to work properly. The server status is 'green '.

  However, when my colleagues try to access the files, they get a response that the server is not responding.

  "Could not get new comments. Acrobat received no response from the server. Try again later or contact your system administrator. »

  With the accessory, they can open and add comments, but cannot post comments to the server. When I check the State I don't see that they have accepted the review.

  I was not able to reason on what else could interfere with their access to the SharedReview server. I noticed that they seem to only have Acrobat Pro XI and not only Adobe Reader. I don't think that would be a problem, as the only drive should be enough.

  What other diagnoses is available for this process?

  I wanted to report that I was able to implement a reviewer with Adobe Reader DC (free version) and using Acrobat Pro DC undertook a review via SharePoint 365, invite them. It was done through link, not an attachment.

  They were able to open control file, see comments, I had already added, made their own observations and posted comments. Mind you, this is a test that is very limited by two users and a few comments. But even if it does not before.

  I don't have a notification in my tracker, I had to open directly and look for open comments. Then I was able to open the file the comments Get command and voila another evaluator's comments were incorporated as well as mine. It worked!

  I think the handshakes and signs are suspect, notifications do not work properly, but we can work around that.

  So it seems that all participants in Adobe Acrobat shared comments via SharePoint 365, must use a version of "DC" of Acrobat or Reader. Acrobat Pro DC to initiate, CD, to contribute to the review.

  This is a problem for all our reviewers on Abobe Reader DC (few have administrator rights), but at least she is promising to work in a limited test.

• Internal errors and missing files after the merger of catalogs

  Hello

  I was merging two catalogs Lightroom CC on OSX 10.10.5 more often with success, however, a single folder is totally inaccessible after the merger and tries to update the location of the folder or re - import photos gives rise to the error codes internal.

  If someone could help me restore references in the catalogue that would be much appreciated.

  Please see the attached screenshots trying to update the location of the folder:

  

  And on the other hand, when you try to import photos:

  

  Thank you very much

  David

  Reinstall worked after than a cup of restarts and everything looks good now - thanks!

• WHATS WRONG WITH WINDOW 7 (camera and scanner Wizard is the last straw that made my VERY loyal windows back)!

  Why are you people FORCING me to go apple?
  I was a supporter of the EXTREME of windows from the day I started working with computers until 17:59 today!
  I have jperchased a new laptop a month for our company. It came with WINDOWS 7. I plugged in our digital camera today a WIZARD of SCANNER & CAMERA No. found? UH... "It's funny," I thought I went to see what was not configured right. AFTER 6 HOURS. I came to the conclusion that windows FAIR BAD! Under XP I could plug in the camera, one an Assistant came...   He asked "WHAT" can they DO YOU LIKE US... Copying photos to my computer using assistant camera and scanner window was my answer... AND BAMMM, WE WENT!  It seems NOW I MUST IMPORT EACH PHOTO ON MY $ GB SD CARD that IS IN THE CAMERA... NOT TO CHOOSE WHAT I WANT TO IMPORT! I CALLED WINDOW AND THEY WANT THE SAME MONEY OF ME TALKING ON THE PHONE! THE $ LAPTOPS AND DESKTOPS % WE HAVE OWNED IN THE LAST * YEARS WASN'T ENOUGH!   I WILL NOT BUY! WINDOWS ANYTHING NEVER NEVER NEVER NEVER IF I DON'T GET THIS TREATY! I (AS WELL AS THE OWNERS OF WINDOWS OF MOSE) DO NOT DESERVE TO HAVE OUR LOYALTY SHOT LIKE THAT!  E-mail address is removed from the privacy * if someone WANTS TO HELP. It IS on February 16, 2010... IF I can NOT GET this SOLVED BY 01/03/2010 I sell all our computers and apple FULL ON more I take 2 working days and to picket of the Redmond Office with my colleagues and my very good friend Steven Swartz since the San Francisco Chronicle!

  I wanted to say something but decided against him.

  CARI you are incredibly patient.

  Well I've changed my mind again.

  If you download say Live Photo gallery (free), it will be one of the options that is available to your device picture is connected (I have a Canon SD 750)

  Select Import with Windows Live Photo Gallery and it will allow you to choose what to import.

  http://download.live.com/Photogallery

  Due to several suites of law (EU) Microsoft was forced to leave out some old features, but most can be obtained by download.