I already add a printer when trying to print a photo, I could not, an alert said that a driver is missing

Similar Questions

• Print spooler is not working, printers are missing from the printers and faxes, add a printer failed with operation could not be completed

  Hi all
  We have a problem on one of our field of PC:

  • Parts of the printer in printers and faxes are missing.
  • The print spooler service stops.
  • Add Printer failed with the operation could not be completed error

  Have tried the steps:

  1. Restart the print spooler service
     The service could be restarted, but stops again when I tried to do something in the windows printers and fax machines, such as adding a printer, or open the properties of the server.
  2. Follow the steps in Bruce Sanderson Web Windows http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm and http://members.shaw.ca/bsanders/FAQPrinting.htm
     All the steps have been followed, but still could not solve the problem.
  3. Follow the steps in the printer problems in Windows http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows
  4. Run sfc/scannow
  5. Run Chkdsk C:/f/v
  6. Run utility HP diagnostic Print as suggested by http://www.theeldergeek.com/forum/index.php?showtopic=17339

  I'm out of ideas.  Someone please suggest what to do about it.

  TIA

  ELL

  Hi all

  Fixed a problem.

  It turns out the key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Providers must be cleaned too - delete all subkeys (and their values) EXCLUDES the Internet Provider LanMan Print Services and printing keys (and their values).  A reboot is required.

  Hope it will be useful for people who have this problem in the future.

  Thanks for these folks spend their time to respond or read my question.

  See you soon,.
  ELL

• I get a message saying "the service cannot accept control messages" when trying to install AVG. What could be the cause?

  I get a message saying "the service cannot accept control messages" when trying to install AVG. What could be the cause?

  original title: error message

  Hello cd1968,

  Here's what he says about this error in the MSDN library (http://msdn.microsoft.com/en-us/library/ms833805.aspx):

  Explanation:

  There is a lag between the requested control and service control status. The service may be in a State of waiting to start, shutdown - pending or stopped.

  User action:

  Wait a few minutes and try your operation again.

  In other words, wait a bit and try again.  You can also try to reboot (be sure to allow time Windows to load completely) and then try to install it.

  Thank you
  Darin

• Illustrator from adobe OLA having some problems when trying to save some files his gift not quite showing memmory

  Hallo

  Illustrator from Adobe having some problems

  When trying to save some files his gift not quite showing memmory

  No one can say anything without good system information and details on your documents. We do not even know your version of I...

  Mylenium

• Support for Microsofts and printer is not recognized and said that it must be declared

  Original title: Declare the printer in vb

  Hello

  Follow-up

  HOW to: Trigger and control Visual Basic print dialog boxes

  Support Microsofts and printer is not recognized and said that it must be declared. I tried their code for the example and it still says that this printer is not declared

  Thank you

  Dan

  Hi Daniel,.

  Thanks for posting your query in Microsoft Community.

  I appreciate the effort you have taken to solve this problem yourself.

  This problem is better suited in the MSDN forum. We have a dedicated team with advanced tools and permission to help with this issue. Then I suggest you to report the same query in MSDN forum.

  https://social.msdn.Microsoft.com/forums/vstudio/en-us/home?Forum=vbgeneral

  Thank you.

• Difficulty for eFax print on Photo paper and not ordinary paper

  If you have recently faced the issue where when you receive an eFax, it is print on photo paper and not ordinary paper, it is because your account is configured to receive jobs as a .tiff instead of .pdf files files. If you wish to have this resolved, send me a Message private with the following information:

  • Customer name:
  • EFax number:
  • New or old account:
  • When he started to question:

  This should solve the problem for you.

• When I try to connect it to my sync account, he said that there is no such user.

  When I try to connect it to my sync account, he said that there is no such user. I don't want to save again, as this is a perverse way to the creation of duplicate accounts. I also have an account password file to keep track of user login data: user name, email address, password, so it's not a matter of just forget the name of account etc. I've just updated to 29 of Firefox, this could be a coincidence.

  I use windows 7, with the latest updates and patches.

  29 Firefox introduced a new synchronization mechanism. This new system has existed only for about 2 months, so it is likely that you have actually not account. You can see the information for the new synchronization here: synchronize bookmarks of Firefox, history, passwords and more.

• New to Lightroom 6.  Were able to import photos previously. Now when I try to import Photos and videos, I specify a folder that contains a mixture of NEF and JPG images, and thumbnails will appear.  However, they are grayed out. When I hit Import, I have

  New to Lightroom 6.  Were able to import photos previously. Now when I try to import Photos and videos, I specify a folder that contains a mixture of NEF and JPG images, and thumbnails will appear.  However, they are grayed out. When I hit Import, I get a message that says no. Photos import active.

  This means that you have previously imported these pictures/videos into Lightroom, and you must not (and are not allowed to) import them again.

  Go to your library Module (not the import dialog box) and find the photos, then you can make use of them in any way you want in Lightroom.

• Trying to activate my new Adobe CS6 software and he said that the activation code is invalid, trying to activate my new Adobe CS6 software and it shows the activation code is invalid?

  Trying to activate my new Adobe CS6 software and he said that the activation code is invalid?

  Make sure you use the correct number, find the serial number of your product Adobe quickly and make sure the installation file and serial number match, error: "serial number is not valid for this product". Adobe Creative Suite

• I did not renew on time and there is no renewal options. tried to get the new subscription. could not do. I have deadlines in 6 hrs mannnn...

  I did not renew on time and there is no renewal options. tried to get the new subscription. could not do. I have deadlines in 6 hrs mannnn...

  simply contact support. They will help you. If support is not available, contact sales, as if you need assistance to purchase... .and once they get online, explain your problem, they r useful

• When I entered my serial number to activate Photoshop CS4, it said that the number is not valid. However, the customer service Adobe told me that the number is valid. What should I do?

  When I entered my serial number to activate Photoshop CS4, it said that the number is not valid. However, the customer service Adobe told me that the number is valid. What should I do?

  Error "serial number is not valid for this product". Creative Suite

• How to add and print two photos on one page

  I want to print 2 pictures on a paper, but I can't understand how to add the other picture on the page. Someone knows or could tell me how to add a second picture page?

  Thank you.

  Dustin-

  Hello

  What operating system do you use?

  Refer the article to print multiple images on a single page.
  3 Tips for printing digital photos at home
  http://www.Microsoft.com/athome/Morefun/photoprinting.mspx
  Working with digital images
  http://Windows.Microsoft.com/en-us/Windows7/working-with-digital-pictures (this item can also be used for windows vista)

• I'm trying to set up a wireless network and it is said that something does not work with the driver.

  Hi there tried to hook my laptop up to wireless as ethernet cable keeps me tripping. I am complete technophobe and propably have the only laptop that gets used especially to open the door.

  Have tried everything I can think even threaten her with glass of water after trying to connect to the wireless network, that it is said that there is something that doesn't work not with the driver if it means something to you. I have a toshiba, if it helps.
  Thank you
  original title: I hope someone can help technophobe

  It is said that there is something not working only not with the driver

  You probably need to install some network drivers for your wireless card.

  Download drivers

  Visit the manufacturer's Web site and select your computer model (this is usually done in the Support section). You should be able to download drivers for your model. Download the driver (s) and follow the instructions to install - every computer is different, so I can't give you exact directions. You can also try to use Windows Update to get drivers - it is located in the start menu.

  Update of the hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Establishment of a network domestic:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

  For more information network:

  Start here to set up a home network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/start-here-to-set-up-a-home-network-in-Windows-7

  What do I need to connect to Internet:

  http://Windows.Microsoft.com/en-us/Windows7/what-do-I-need-to-connect-to-the-Internet

  Adding a wireless computer

  Set up a wireless network:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  If your network is wireless, run the wizard to Set Up a network on the computer attached to the router.

  1. open Set Up a network by clicking the Start button, then Control Panel. In the search box, type network, click Network and sharing Center click on set up a new connection or a network and then click on set up a new network.

  2. the wizard will guide you in the process of adding other computers and devices to the network. For more information, see:

  http://Windows.Microsoft.com/en-us/Windows7/add-a-device-or-computer-to-a-network

  Manually add a wireless computer

  1. sign the computer.

  2 open the connect to a network by clicking the network icon in the notification area.

  3. choose the network wireless from the list that appears and then click on connect.

  4. type the network security key or password if you are prompted to do so, and then click OK.

  -You will see a confirmation message when you are connected to the network.

  5. to confirm that you have added to the computer, follow these steps:

  -Open network by clicking the Start button, then Control Panel. In the search box, type network, and then, under center network and sharing, click on view network computers and devices.

• Error when access instrument ' primary error: (Hex 0xBFFA003D) could not find any channel or repeated capacity channels.

  Hi all

  I believe that I have correctly configured max I'm trying to use the PXI-6229 device via. When I try initialized, I get the following error:

  The primary error: (Hex 0xBFFA003D) could not find any channel or repeated capacity channels.

  Clues about what means error?

  Thank you

  Manesh

  First of all, you'll have more help in the appropriate forum.  This seems to be a problem DAQmx and their forum is here: http://forums.ni.com/t5/Multifunction-DAQ/bd-p/250

  Secondly is this help: http://forums.ni.com/t5/Switch-Hardware-and-Software/NI-SwitchExec-with-3499-and-IVIDriver/td-p/1827...

  Finally: You can communicate with the MAX card?  Or is the occurrence of the error in MAX?  What language do you use to talk to the card with?  Using IVI?  If you are using LabVIEW or CVI then open examples of shipping and test them with this card.

  Kind regards

• Windows service install is not installed correctly shows when you try to download. I could not even download / enable microsoft Fix to solve the problem

  After using a utility program to defrag and solve other problems and registry, I started to have problems. All started when I tried to download the new OS 2.0 for my playbook. Then, when I tried to find what has increased, I tried to make a different download and when I went to run it, a message appeared, Windows install is not properly installed. When I tried to do a windows system recovery to get back 2 full days, he started the process and then an error message appeared and was unable to perform the restore. I went to Microsoft to get object Fix solution and downloaded but cannot run. All the ideas and where can I find the real file name in an attempt to do a cover of just him.

  Saturday, June 23, 2012 23:37:07 + 0000, DTkareboutkatz wrote:

  After using a utility program to defrag and solve other problems and registry, I started to have problems.

  What program did you use? Defragment is OK, but when you say "fix."
  Register' looks like you used a registry cleaner.

  If you did, this is definitely what caused your problems. They
  should never be used.

  Registry cleaning programs are all snake oil. Cleaning of the
  registration is not necessary and is dangerous. Let alone register and
  do not use any registry cleaner. Despite what many people think, and
  What software record cleaning suppliers are trying to convince you,
  have unused registry entries is not really make you hurt.
  The risk of a serious problem caused by a registry cleaner by mistake
  delete an entry you need is much greater than any potential benefit
  It can have.
  Read http://www.edbott.com/weblog/archives/000643.html
  and http://aumha.net/viewtopic.php?t=28099
  and also
  http://blogs.technet.com/markrussinovich/Archive/2005/10/02/registry-junk-a-Windows-fact-of-life.aspx

  Let me stress that neither me nor anyone else who warns the
  use of registry cleaners never said that they always cause
  problems. If they have always caused problems, they would disappear from
  the market almost immediately. Many people have used a registry
  cleaner and never had a problem with it.

  The problem with a registry cleaner is that it carries with it
  the risk of a significant problem. And since there is no
  benefits of using a registry cleaner, running that risk is a very bad
  good deal.

  Ken Blake, Microsoft MVP