I already worked with the macro recorder in Windows 95 (32 bit), now I want to do it on a 64 bit system.

Similar Questions

• VMware 3.0 or 3.5: will it work with the following equipment?  Has anyone tried it? I want to try HA and all the whistles...

  H1. VMware 3.0 or 3.5: will it work with the following equipment?

  2 x G2 Compaq DL380 5i cards controller 5300 AND attached to the case STORAGEWORKS ENCLOSURE 4354R RM DOUBLE U3 PORTS (not on the compatibility list) basic storage

  OR

  
  

  
  

  
  

  2 x G1 s Ml570 without card 5i but rather 5300 controller cards (in the compatibility list) connected to

  
  U3 PORTS(not on compatibility list) DOUBLE table of STORAGEWORKS ENCLOSURE 4354R RM storage box

  Although not of your configurations are a list of compatibility, it should work, but don't expect to have the fast system (this is the Pentium III). There is a problem with the connection box to two servers. If you do this, that a single server can access 7 disk, and the other will be able to access the other 7.

  If the Smart Array controller is listed, you do not have to worry too much for speaker. You must use ITS 5300 with two lanes in both configurations (case being double bus, so you have two SCSI cables), or you can connect to a server to one bus SCSI and another server to the second SCSI bus. Whatever you choose to do, ORCA allows to configure the drive HARD and RAID.

  I would not recommend to use this system in a production environment (it's slow and old), for testing it should be OK.

  I have (for testing purposes) DL380 G3 with MA8000 storage and it works without a single problem.

• Password Manager - will it work with the new edge browser Windows 10

  Hi, did anyone know if Password Manager will work with Windows 10 edge browser? The software and all information transferred on when I've updated... but PWM is informed not passwords. Moderators of Lenovo - do you know if PWM will work in the new browser? Should I uninstall and reinstall and see if the credentials are then picked up by the browser? If it is not supported, a future version will support fill in the edge browser, credentials? Thank you.

  Nice day.

  Please see this post from someotherguy: https://forums.lenovo.com/t5/Windows-10/Thinkvantage-Password-Manager-doesn-t-work-on-Windows-10/m-p...

  Kind regards.

• My bi-ecrans Setup has stopped working with the latest update of Windows

  My bi-ecrans Setup has stopped working since the last windows update.  The second screen is relegated to never turn on and in the part 'View' of the Control Panel, I can't change the 2nd monitor resolution of anything in addition to 480 x 640.  I installed the latest drivers for the video card and two monitors.  I have everything down, powered, entretienavec left for a few minutes and fed up, nothing.  It has been like that for a few days now.  Any advice would be very useful,

  Thank you

  Tyler

  Details:

  PC: HP Compaq 8200 Elite

  Graphics card: AMD Radeon HD 6500 Series

  First monitor: ViewSonic 2030

  Second monitor: Dell 1908FP

  All pilots are underway according to Dell, ViewSonic, AMD and Microsoft.

  Latest patches from Windows Update killed my dual Setup monitor:

  Update of security for Microsoft Office PowerPoint 2007 (KB2596764)

  A security update cumulative for the stop bits ActiveX for Windows 7 for x 64-based systems (KB2618451)

  X 64-December Windows malicious software removal tool (KB890830) 2011

  Update security for Windows 7 for x 64-based systems (KB2620712)

  Update of security for Microsoft Office PowerPoint 2007 (KB2596912)

  Update for Microsoft Office Excel 2007 (KB2596596)

  Update of security for Microsoft Office Publisher 2007 (KB2596705)

  Update of security suites for Microsoft Office 2007 (KB2596785)

  Cumulative Security Update for Internet Explorer 9 for Windows 7 for x 64-based systems (KB2618444)

  Updated for suites Microsoft Office 2007 (KB2596651)

  Update security for Windows 7 for x 64-based systems (KB2639417)

  Updated for suites Microsoft Office 2007 (KB2596789)

  Update security for Windows 7 for x 64-based systems (KB2619339)

  Update for Windows 7 for x 64-based systems (KB2633952)

  There is no update stated in your post which could have implications on your graphics card, or its driver.

  Have you installed the latest graphic driver AMD in the AMD site?

  http://sites.AMD.com/us/game/downloads/pages/radeon_win7-32.aspx

  NB this link is the 32-bit win7 driver.

• TimesTen issue with the chain of connection on a 64 bit system

  Hello dear members,
  I need to write in vbscript code that creates a connection to the server Oracle timesten.
  The TimesTen database is located on a unix server, and the client application is on windows server.
  
  This is my code:
  
  Set mCnTT = CreateObject ("ADODB.connection")
  mCnTT.ConnectionString = "Provider = MSDASQL.1; DSN =" & TT_DSN & ';' & 'TTC_SERVER =' & TT_SERVER & ';' & 'TTC_SERVER_DSN =' & TT_SERVER_DSN & ';' & UID = "& TT_UID &";"&"PWD ="& TT_PWD & ';'.
  mCnTT.Open
  
  When he ran for 64-bit application will work fine. (I tried it on a stand alone vbscript)
  
  My problem is that I need this code runs on a Server 64-bit system, BUT from a 32-bit application (QTP)
  and I get the following error:
  "[Microsoft] [ODBC Driver Manager] driver name not found and no data Source specified default.
  
  no idea how to build a connection string that works? Maybe use a differnet provider?
  
  MSDAORA provider supports timesten?
  
  any suggestions will be most welcome!
  Thank you
  Rachel

  If you will be running a 32-bit application on 64-bit connection to TimesTen 64-bit Windows on a Unix server. is that correct? Assuming it is, you must:

  1 install TimesTen 32-bit Windows client rather than the Windows 64-bit TimesTen customer (a TT 32-bit client will work with a 64-server VT fine)

  2 use the 32-bit ODBC Administrator to configure the DSN rather than the 64-bit default cmdlet

  (2) is particularly important. DDNs ODBC 32-bit and 64-bit are held in completely different places in the Windows registry. 32-bit applications cannot see/use 64-bit DSN and vice versa.

  None of this is directly related to TimesTen; It comes to all the standard features of Windows 64-bit and questions.

  Chris

• Satellite A500-132 - games does not work on the mode full screen (Windows 7 64-bit)

  everything works fine... videos, applications... everything is very good...
  also, I downloaded all the drivers and all work fine...
  but when I installed a game and wanted to play, he began not as a large screen, there was a void balck space left and right... but was runnung fine...
  How can I make it work on the entire screen?

  Note:-games allowing to operate normally oon windows vista...

  I downloaded the driver and installed several times: s

  driver: -.
  Mobility radion ATI HD 4600 series...

  can someone help me?
  THX

  Hello

  Which driver do you have exactly? You should try the new driver to display on the Toshiba site. The drivers from ATI directly not designed for mobile cards!

  Normally, every game, you can change the screen resolution. There you can adjust it to the native screen resolution.
  Check this box!

• Firefox works with the touch screen technology windows 8?

  Plan to buy all-in-one touch screen pc and want to know if Firefox browser works well with this technology.

  Yes it is on the right. as the article linked in my response earlier said that the touch interface is currently available in early development builds, which are mainly for the developers and users very advanced and not recommended for daily use. Firefox 26 will come on the aurora in mid channel one to beat late October - these build would give you the opportunity to test and to discover the new format in a more stable form (provided that the calendar holds).

  https://www.Mozilla.org/Firefox/channel/

• Quick access keys to CUT and PASTE on Windows 8? Used to use 'Ctrl, home, Alt - C' to CUT and with P for PASTE. Does not work with the new computer on Windows 8. Any way to make it work again?

  Try to put in place an easy way to cut and paste with Windows 8 on the new computer.  Maybe it's that I can't find it.  Need help!

  Try to put in place an easy way to cut and paste with Windows 8 on the new computer.  Maybe it's that I can't find it.  Need help!

  Hello

  CTRL + X = cut

  CTRL + C = copy

  CTRL + V = paste

  Concerning

• This external modem will work with Satellite L500-1XL, running Windows 7

  Hello

  When in Spain, I need to use the dialing up to the internet through Telefónica.
  I guess that the L500-1XL is not an internal modem?

  This external modem will work with the L500-1XL running Windows 7?

  Thank you very much in advance for your help.

  A

  Hello

  You re right Satellite L500 doesn t have an internal modem, so you need an external.

  I think you can buy every modem that is compatible with Vista. Alternative ask your favorite computer dealer or authorized service provider

  A friend got good experience with USRobotics 56K modem like this:
  [USRobotics 56K USB Faxmodem USR5637 | http://www.amazon.co.uk/USRobotics-56K-USB-Faxmodem-USR5637/dp/B0019LZCEI/ref=sr_1_1?ie=UTF8&s=electronics&qid=1269253039&sr = 8-1]

• Hi, I work with the standard of the CS6 for Mac, Adobe, I bought a DVD with the software. I already installed on my mac book. Soon, I want to buy a second computer for my work. When I bought the software told me that it is possible to install the

  Hi, I work with the standard of the CS6 for Mac, Adobe, I bought a DVD with the software. I already installed on my mac book. Soon, I want to buy a second computer for my work. When I purchased the software, I was told that it is possible to install the software on a second computer. But I also read lately that I will be allowed to work with a computer. I want to work on both of my computers without or install and / activation of the software every time. Is this possible? Thank you!!

  @

  You should be able to install the product on two computers as long as they are running at the same. The platform should also be Mac

  You can download the product of

  Download the CS6 products

• Satellite A210 - 10 c only works with the 800 Mhz instead of 1.6 Ghz

  Hello

  I have a very big problem. One day, I look in Vista on my resource monitor and see that the max freuquence is only 50%.

  So first of all I think that is no problem because the assets 'energy savings' energy recorded.
  I have a Satellite A210 - 10 c portable.

  So I switch to maximum power and perform a test of prime95. But hell, the max freuquence has not changed. I also installed everest and cpu z, but all programs show the same to me:

  My laptop only works with the 800 Mhz instead of 1.6 Ghz!

  I'm looking for drivers for the AMD processor, but you need not for Vista. Update all the drivers of Toshiba and Programms and BIOS (in fact, it is the 1.9).

  Nothing helps.

  As a last test, I reinstalled Vista, but also did not help.

  And now I'm at a loss what to do.

  I hope someone can help me.

  Good bye...

  Have you installed the Vista using the recovery CD or the original CD of Microsoft Vista?

  I ask because the restore CD contains all drivers for Toshiba and yellow exclamation marks should not be apparently in Device Manager.

  If you used the original CD of Vista I think that you have not installed the Package of Intel Robson.

  I found the package of Robson on the Toshiba driver-> Satellite P200 area page.

  Maybe you should check this.

  Your comments would be appreciated

• Satellite C55: microphone does not work with the connected headphones

  Hey everybody,

  I have a Toshiba Satellite C55. I've seen other forums posted on this topic, but none of the solutions seem to work for me. I tried to uninstall the drivers and restart the computer, and configure the microphone when the headphones are connected.

  My microphone (installed on the laptop) works completely fine... until I have plug in my headphones. He stops working, but I can still hear the music or friends through my headphones. They have a regular pair of Sony headphones, not headphones, so they do not have a microphone on them or anything. My microphone has never worked with the headphones plugged in, and the computer is only a few months old. I would really appreciate a clear solution, thank you for taking the time to look!

  What Satellite C55 do you have exactly?

  This laptop does support that one socket for headset and microphone, or you have two different plugs: one for mic and one for headphones?

  Usually, you can check the playback (speakers, headphones) devices and recording devices (microphone and external microphone) in the control panel → sound → playback (or recording) tab

  If you need to check if the internal MIC is set as device by default when the headphones are connected.

  In the event that the laptop uses the Realtek audio driver
  Reach
  Control Panel → Manager Realtek HD Audio → select Mic tab → click Device avancΘs
  Then select option button separate all entries in the independent input devices.
  Click OK
  Speakers of tray right click (Volume) then the recorders (confirm the microphone is active) → select microphone → click on set default (default device)
  Then close

• Unexpected behavior with the Option "record in the result.

  Hello

  I have unexpected behavior with the Option "record in the result.

  I have a few steps in the subsequence 'X', this subsequence passes a Boolean parameter. According to the value of the parameter I change the "Recorgind results" Option to report it or not. The thing is that if 'result Recorgind' set at race time I modofy by changing the value of Step.ResultRecordingOption to "Enable" and "Disable", the step is not reported until the same sous-suite 'X' is called for the second time (without changing the parameter passed).

  For example: (Preconditon: result Recorgind Option of all value sous-suite x are defined as Disable)

  1 CallSubsequenceX(Parameter: Enable)

  2 CallSubsequenceX(Parameter: Enable)

  3 CallSubsequenceX(Parameter: Disable)

  4 CallSubsequenceX(Parameter: Disable)

  Expected result:

  1. measures have been reported.

  2. measures have been reported.

  3. measures have not been reported.

  4. measures have not been reported.

  Result:

  1. measures would not same value Step.ResultRecordingOption has been changed to 'enable '. (Not Ok)

  2. measures have been reported. (Ok)

  3. measures reported same value Step.ResultRecordingOption has been changed to 'disable '. (Not Ok)

  4. measures have not been reported. (Ok)

  I use TestStand 2013 (5.1.0.226)

  Thanks in advance.

  -Josymar.

  Hi josymar_guzman,

  I just review the sequence and indeed we´re experience unexpected behavior with the Step.ResultRecordingOption callback. By a reason when you run the callback in the expression before each step section, the statement runs only until the next sequence is called, which is not what we want.

  To avoid this, you can place a statement before each step of the sequence, so you can change the State of the Option "record result" for the sequence running (and it is only the following). You can try something like this

  

  where the expression of the statement will be the recall "RunState.NextStep.ResultRecordingOption is YourCondition". With this, we guarantee that the results of the next step will be saved or not. I also remove the expression in the expression prior to each step section, because the condition is now on the statement before each step.

  I tried and it works fine. I´ll set the sequence that you share with me, with the changes. I hope this will help you and solve your problem.

• I had a computer repair man replace my hard drive and restore my laptop and now my orginal key does not work with the copy of vista it has installed and it won't validate.

  I had a computer repair man replace my hard drive and restore my laptop and now my orginal key does not work with the copy of vista it has installed and it won't validate how can I solve this
  I have an acer

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Validation status: invalid license
  Validation code: 50
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - XY9X3 - JDXYP-6CJ97
  The Windows Product Key hash: xFQJU8srKsovk6p1Lk1yW93in4E =
  Windows product ID: 89583-OEM-7332157-00211
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.0.6002.2.00010300.2.0.003
  ID: {F20B4B72-1308-45BE-8F90-95E91A3F0AAF} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows Vista (TM) Home Premium
  Architecture: 0 x 00000009
  Build lab: 6002.vistasp2_gdr.110617 - 0336
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {F20B4B72-1308-45BE-8F90-95E91A3F0AAF}1.9.0027.06.0.6002.2.00010300.2.0.003x 64*-*-*-*-6CJ9789583-OEM-7332157-002112S-1-5-21-923204104-223683984-168055983Acer Extensa 5630 Phoenix Technologies LTD.V1.30 20090319000000.000000 + 00070333507018400FA04090409US Mountain Standard Time(GMT-07:00)03ACRSYSACRPRDCT109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.0.6002.18005
  Name: Windows Vista, HomePremium edition
  Description: operating system Windows - Vista, channel OEM_SLP
  Activation ID: bffdc375-bbd5-499d-8ef1-4f37b61c895f
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 89583-00146-321-500211-02-1033-6002.0000-0042012
  Installation ID: 004511331255365043724851364501374781338933223323713385
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=43476
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=43475
  Partial product key: 6CJ97
  License status: Notification
  Notification reason: 0xC004F063.

  Windows Activation Technologies-->
  N/A

  --> HWID data
  Current HWID of Hash: OgAAAAEAAgABAAIAAwACAAAAAwABAAEAeqjWy6pVxGJ6f0DXhgfkNoBBsJzy9ErM1F/eG4QdrFYqhQ is

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20000
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC APIC PTLTD
  FACP INTEL CRESTLNE
  HPET INTEL CRESTLNE
  START PTLTD $SBFTBL$
  MCFG INTEL CRESTLNE
  SLIC ACRSYS ACRPRDCT
  ASF!            OEMID OEMTBL
  SSDT BrtRef DD01BRT
  SSDT BrtRef DD01BRT

  Ah! -in this case, it is not necessary.

  I see from my records that a similar case has been solved by uninstalling and reinstalling the update WAT - KB971033

  Open the Windows Update - click the link view updates installed on the left of the page

  in the list, find the WAT update KB971033, and then uninstall it.

  Then restart and reinstall the update from here - http://support.microsoft.com/kb/971033

  redemarrer restart again, then try to change your product key to the one on the sticker - what is happening this time?

• Files created with Illustrator CS2 12.0.0 version will be compatible and works with the latest version of Illustrator.  The files are registered as *.ai------.

  I have an older version of Illustrator and you want to upgrade.  My question is: files created with Illustrator CS2 12.0.0 version will be compatible and works with the latest version of Illustrator.  The files are recorded as * .ai?

  That should be no problem.

  Text will be redistributed without doubt if you want to change it.