I am connected to internet but windows says I'm not connected.

Similar Questions

• I have access to the internet, but Windows says no Internet access.

  I got Windows 7 Professional of several Dell Latitude E6440 (64-bit) and began their preparation for deployment, but I ran into the same problem on all of them so far.

  When I use a cable Ethernet the network icon has the yellow warning icon showing. When I look at the Network Center and sharing, it says access Internet No., but I use Google Chrome and Internet Explorer to surf the web and download the drivers and programs. Also, Windows detects my internal network, but not the Internet.

  So far, I have uninstalled and updated LAN drivers and let windows try to fix the problem. Sometimes Windows will run randomly temporarily solved the problem, but he always comes back.

  I don't know if there was a problem with the image of Dell or what, but help would be most appreciated.

  Thank you!

  Double posted broken forums...

• I think I'm in my correct password, but windows says I'm not.

  It is your desktop windows 7.  I may enter an incorrect PW but do not.  There is a reason, it might reject a correct password.  I get the circle of rotation for 5-7 seconds then it says wrong password.  Any suggestions will be appreciated! If I reinstall my OS it will wipe my system?

  There are a lot of options built into Windows to help you out of this situation:
  • Restart the computer with your Windows repair CD, then use system restore to set Windows in a few days (only works if you have recently changed the password).
  • Log on to your account admin to spare, and then reset the password for your existing account (works only if you set up an alternative admin account).
  • Log in as administrator mode without failure, then reset the password for your existing account (the password is usually empty).
  • Insert your flash drive USB with the password key file (only works if you have taken the time to create such a key file).
  • Use the password indicator (works only if you have created a hint and if it's good enough to allow you to guess the password)
  • Check your paper files (works only if you threw down the password somewhere)
  Most people have spare admin account, same as they have a spare House key or a car. If you take any of the precautions above, then you can do this:
  1. keep tapping F8 during the first phase of startup.

  2. select Repair from the menu.

  3. Select an administrator account, and then enter its password.

  4. When you are prompted, select System Restore.

  5. set Windows to a point when you can always log on.
  If you do not have a recent backup of your files, then you can use the method below to get back them even if it is impossible to open a session. It will take time to implement, probably a lot more regular backups would have taken you. Start your computer with a boot CD Ubuntu then its GUI allows you to save your files on an external storage device.
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer/

• running windows 7 64 bit sp1 have 6 GB of ram, but windows says usable only 3.29 concerts

  running windows 7 64 bit sp1 have 6 GB of ram, but windows says usable only 3.29 concerts

  JAC

  Where are you seeing the 3.29 "usable"?  It would be fair that the rest is in fast cache.

• I use a Mac 10.5.8 and your software says it must be compatible with 10.5, but he says it's not compatible with my operating system. Why?

  I use a Mac 10.5.8 and your software says it must be compatible with 10.5, but he says it's not compatible with my operating system. Why?

  10.5.8 it is compatible with firefox only with Intel see 10.0:

  http://www.Mozilla.org/en-us/Firefox/10.0/system-requirements/

  for your ppc mac, the most recent is the version that you have 3.6.26 see:

  http://www.Mozilla.org/en-us/Firefox/3.6/system-requirements/

  Thank you

  Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.

• After a computer crash, I reinstalled Windows XP, but Windows Media Player does not work.

  After a computer crash, I reinstalled Windows XP, but Windows Media Player does not work. I don't have reinstall all disks. Will install tools software system Dell, Sonic RecordNow, Sound Blaster Live, or CyberLink Power DVD play cd possible? Thank you.

  original title: Media Player

  Hello

  1. What is the exact error message or error code when you try to open Windows Media Player?

  2. what version of Windows Media Player?

  3. What is the issue you are experiencing during playback of the CD?

  I suggest you follow the Microsoft article reference and check if it helps.

  Troubleshooting playback in the Windows Media Player for Windows XP: http://support.microsoft.com/kb/306317

  Resources for the resolution of problems in Windows Media Player: http://support.microsoft.com/kb/843509

  I recommend you to install the software provided by Dell disk and check if it makes a difference.

  Note : using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• I have purcashed Adobe Acrobat Pro DC, but he says that I not meed the minimum system requirements. What should I do? Can I download a lower version of Adobe Acrobat Pro DC?

  I have purcashed Adobe Acrobat Pro DC, but he says that I not meed the minimum system requirements. What should I do? Can I download a lower version of Adobe Acrobat Pro DC ?

  I am able to install it well just a min ago. This time of I have launch the folder to select 'Configuration' instead open it directly after installation & works now. Thank you very much.

• I downloaded the demo of Illustrator, but it says it does not open: in this kind of mac: whats going on?

  I downloaded the demo of Illustrator, but it says it does not open: in this kind of mac: whats going on?

  This means that it is said: If the installation program does not start again, your machine is too old and has a processor not supported.

  Mylenium

• I am connected to the net, but itunes says I'm not. Help, please.

  am connected to the net but itunes saying that I have not helped

  Hi Brad,

  (1) is limited only to ITunes?

  (2) what is you receive the exact error message?

  You can follow the steps described in items Apple below which deals with a similar question.

  Unable to connect to the iTunes Store

  http://support.Apple.com/kb/ts1368

  ITunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

  http://support.Apple.com/kb/TS1814

  If the problem persists, contact Apple for known problems

  http://www.Apple.com/support/iTunes/

• I am fully connected to the Internet, but my DNS server is not responding. How can I connect otherwise?

  I am fully connected to the Internet, but when I click on my home page and even several other pages, including Windows Live Mail, I get an error message that my DNS server is not responding. How can I work around this problem and to connect to the Internet anyway?

  You want to be sure that you use the right setting for your DNS server.  You can move this in your browser using the digital URL for the what you want to access web sites.  You will find them by using the PING command at the command prompt.  Hold the Windows key and press R.  Then type CMD and press ENTER.  Then enter for example to get the address of the web site of MS PING WWW.MICROSOFT.COM.

  Unless otherwise directed by your Internet service provider, you want TCP/IP settings to "obtain an IP address automatically" and "Obtain DNS server address automatically".  To do this click Start-> Control Panel-> Network Center and sharing-> view status.

  Then click on properties.

  From there, click on Internet Version 6 Protocol and properties.

  Click on the two radio buttons to "obtain an IP address automatically" and "Obtain DNS server address automatically".  Click OK.

  Then click Internet Version 4 Protocol and make the same changes in what concerns the version 6.

  I hope this helps.  Good luck.

  Good luck.

• I use windows vista home genune but system says it's not genune

  I use windows vista home, but system says its not authentic.

  Microsoft Genuine Advantage Diagnostic tool:
  http://www.Microsoft.com/genuine/selfhelp/ServiceRequest.aspx
  Download the tool: http://go.microsoft.com/fwlink/?linkid=56062
  Post your results here: http://social.microsoft.com/Forums/en-US/genuinewindows7/threads

  Stuck key (error 0xC004C4A2):
  http://social.Microsoft.com/forums/en-us/genuinewindows7/thread/a2444f34-0AFF-4f29-a8ac-67e28b0c0285
  "To check your PID press the key to victory and break at the same time, or system properties open via the Control Panel, scroll to the activation and look at It PID section will look something like this 54321-1234567-12345-067

  The part that you are interested in:
  Section three-digit on the product ID number, if it matches or is one or two digits
  the examples below, you probably have a MSDN or TechNet product key. "These keys must not be sold for retail use.
  065, 066, 067 068 for Ultimate,
  sector 220 for Pro
  230, 231, 232 area of award.
  There are probably others, but they should be close to those that are displayed"
  (Download the Microsoft Genuine Advantage Diagnostic Tool listed above).
  Also: http://social.microsoft.com/Forums/en-US/genuinewindows7/threads

  Note: Although sold illegally MSDN/TechNet product keys allow for the activation of several (usually 5 or 10).
  If these keys can be sold several times before activation may fail.

  = On MSDN or TechNet Product Keys - credit Andre Da Costa =.

  "About MSDN or TechNet product key
  They are genuine Microsoft product keys, they are in fact retail licenses, but it is expected for a product specific Microsoft Software Developer Network (MSDN) and TechNet channel for professionals who pay a subscription. The main objective is for evaluation purposes. The big thing to their subject, unlike Microsoft, MSDN or TechNet keys evaluation software expires. Because the agreement by virtue of which the subscription is provided is a single license, none of the software should be distributed outside of it. Although its $50,000 worth of licenses, it is for one person only for use and no one else. Unfortunately, no matter the conditions of license, people still abuse of the program, two key product gift or sell on auction sites. Microsoft it issues licences in good faith that customer will not do it, but I guess human nature win on.

  In your case, what has probably happened is, you bought a license MSDN key, which carries up to 10 activations unlike packed full of retail licenses which carry 1 activation. The person who sold it to you probably sold to 10 other people. Somewhere along the way, one of these people could have installed on a second system activated, because it went past 10 activation threshold, Microsoft has detected that he was abused and blocked the key for later use. »

  = Actions you can take .

  Chasing pirates: inside Microsoft's war room:
  The New York Times: http://www.nytimes.com/2010/11/07/technology/07piracy.html?_r=1&hp
  "AS the Sun rose over the mountains circling Los Reyes, a city in the Mexican State of Michoacan, one morning in March 2009, a caravan more of 300 heavily armed enforcement of law set out on a raid."

  R U Legit: file a complaint:
  complaints from consumers at 1-800-RU-LEGIT (785-3448)

  Reports of software piracy
  http://www.Microsoft.com/piracy/reporting/default.aspx

  Contact Microsoft: http://support.microsoft.com/contactus#tab0

  J W Stuart: http://www.pagestart.com

• UPDATE SUCCESSFUL, BUT DETECTED WINDOWS SAYS IT IS NOT YET UPDATED

  Update security for Windows XP

  Windows XP	Update security for Windows XP (KB2839229)		Sunday, July 7, 2013	Automatic updates
  Windows XP	Update security for Windows XP (KB2839229)		Sunday, July 7, 2013	Automatic updates
  Windows XP	Update security for Windows XP (KB2839229)		Sunday, July 7, 2013	Microsoft Update
  Windows XP	Update security for Windows XP (KB2839229)		Sunday, July 7, 2013	Microsoft Update
  Windows XP	Update security for Windows XP (KB2839229)		Sunday, July 7, 2013	Microsoft Update
  Windows XP	Update security for Windows XP (KB2839229)		Sunday, July 7, 2013	Automatic updates

   
   
   
   
  As you can see above, this update has been downloaded and installed suceesfully; but Windows XP 32 bit repeat me after the execution of Windows/Microsft Update it's still NOT installed yet!  He does this for my other laptop (Vista), but I upgraded to W7.
   
  Thnk.
   
   
  Thank you.
   
  .
  FRANCISCO SANTOS, SEATTLE, WA.

  Download Update on your desktop.
  Click Start, run and navigate to the file.
  Do not hit enter or click OK yet.
  Add a space and / o at the end of the .exe
  Click OK.
  Leave it to install.
  To do this, check the Microsoft Update. Is he past?

  If this is not the case, do not remove the update yet.
  I have something else.

• Windows says it's not answer

  I keep having committed an error message windows does not no how to fix this

  Hello

  You run a specific program when this happens?

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• I enter my 25 character product key, but he says it is not valid, help someone?

  I just ordered a brand new Acer of QVC and it has installed in the computer to Microsoft, I have to do is enter my 25 character product key to validate but he says the key is invalid and I don't understand why. Do I need a new key, or is this a common mistake, and if I need a new key to how I get it? I'm so lost, please help me.

  Please note that if you use the Windows 7 product key located on the certificate of authenticity attached to your system label, this will not work, it is only for Windows 7. You need a product key Office 2010.
  If your computer comes with a trial version of Office, you need to get a trial key or buy a full license:
  Trial license:
  http://Office.Microsoft.com/en-us/try/
  Full license:
  http://support.Microsoft.com/kb/823570
  Get the key;
  http://Office.Microsoft.com/en-us/buy/redir/XT101874326.aspx?CTT=5&origin=HA101847520

  Error message when you start an Office application after installing a suite Office: "invalid product key".
  http://support.Microsoft.com/kb/836178

  If you have a trial version of Office 2010 that came with your computer, try to uninstall it first:

  Run the patch tool mentioned in the article below to uninstall Office 2010:
  http://support.Microsoft.com/kb/290301

  Download a trial version of Office 2010 that corresponds with the edition that you purchased and convert it to a version full:

  Trial license:
  http://Office.Microsoft.com/en-us/try/

  See the link on how to convert a trial version of a suite full Office 2010 or program to a commercial version: -.

  http://Office.Microsoft.com/en-us/project-help/convert-a-trial-version-of-an-Office-2010-suite-or-program-to-a-full-retail-version-HA101886436.aspx

  http://Office.Microsoft.com/en-us/buy/convert-your-trial-to-a-full-product-version-HA101812668.aspx?CTT=1

  Microsoft Corporation develops and markets two separate products:

  Microsoft Windows 7 and Microsoft Office (including Word, Excel, PowerPoint).

• I need to download Photoshop Elements 8 in my new iMac, but he says that's not available, how can I do?

  I've updated my iMac with the Maverick OS and it does not recognize the installation for the elements8 Photoshop Cd, I need to download, but it says on the web than is available for windows. Where can I find for mac? Thank you

  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  http://prodesigntools.com/direct-download-links-for-Lightroom-3-and-Photoshop-elements-8.h tml