I am connected to the net, but itunes says I'm not. Help, please.

Similar Questions

• I am fully connected to the Internet, but my DNS server is not responding. How can I connect otherwise?

  I am fully connected to the Internet, but when I click on my home page and even several other pages, including Windows Live Mail, I get an error message that my DNS server is not responding. How can I work around this problem and to connect to the Internet anyway?

  You want to be sure that you use the right setting for your DNS server.  You can move this in your browser using the digital URL for the what you want to access web sites.  You will find them by using the PING command at the command prompt.  Hold the Windows key and press R.  Then type CMD and press ENTER.  Then enter for example to get the address of the web site of MS PING WWW.MICROSOFT.COM.

  Unless otherwise directed by your Internet service provider, you want TCP/IP settings to "obtain an IP address automatically" and "Obtain DNS server address automatically".  To do this click Start-> Control Panel-> Network Center and sharing-> view status.

  Then click on properties.

  From there, click on Internet Version 6 Protocol and properties.

  Click on the two radio buttons to "obtain an IP address automatically" and "Obtain DNS server address automatically".  Click OK.

  Then click Internet Version 4 Protocol and make the same changes in what concerns the version 6.

  I hope this helps.  Good luck.

  Good luck.

• Firefox said it is unable to connect to the net but IE and the signal is strong

  Firefox has been great until this afternoon. Then all of a sudden it gave me an error message that he was "unable to connect." "" The laptop thinks it entirely connected wireless to the Homehub. I have been in contact with BT that kept me in line with IE and say that the problem is with Firefox. I uninstalled and reinstalled Firefox and I'm still getting the message that it is unable to connect. Help, please!
  PS Firefox works perfectly on my desk.

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.com/kb/server+not+found
  • https://support.Mozilla.com/kb/firewalls

• OfficeJet 4630: Says printer connected to the network, but computer says that it is not connected or idle

  I can't print to our hp officejet printer range 4630.  The printer says that it is connected to our home wireless network.  However, he said that it is inactive or not connected to the network on my mac.  The only way it will print sometimes is if I switch to a wireless network that is named the same as the printer.  AirPrint does not work.  We have a Linksys router.  Not sure if this is the problem or not.  I ran all kinds of diagnostic impressions on the printer and all say that it is connected.  I also tried to put the ip address into my web browser and it does not find the printer when it is connected to our home network.  Help, please!

  Thanks for trying my earlier recommendations. In my view, the problem you are experiencing may be with your wireless router. Normally, I would have you make sure that it is configured correctly, but you cannot access the built-in Web server.

  I want to try to set a static IP address, so we can try to get in the EWS. Please continue here: printer does not maintain the wireless connection

  A little luck? If you were able to set a static IP address, please try and access the built-in Web server. Follow the steps below:

  1. open EWS (use my earlier recommendations) printers

  2. go to the Network tab

  3. network protocols

  4. Select enable IPv4 ONLY

  Now with IPv4 enabled, you should be able to print wireless.

  If this isn't the case, you will need your router company to make sure that the multicast is enabled, Hello Protocol is enabled, mac filtering is disabled and ask them to check if there are updates the firmware for the router and the router's firewall check to make sure that it does not obstruct the communication

  The following ports are also used by your HP device and may need to be opened on your firewall configuration

  Incoming (UDP) ports are ports of destination on the computer while outgoing ports (TCP) are ports of destination on the HP device

  Incoming ports (UDP)

  137, 138, 161, 427

  Outbound ports (TCP)

  137, 139, 427, 9100, 9220, 9500

  The ports are used for the following functions:

  Print

  427, 137 161 UDP ports

  TCP port 9100

  Download of photo card

  137 138 427 UDP ports

  TCP 139

  Scanning

  427 UDP port

  TCP 9220, 9500

  Faxing

  427 UDP port

  TCP port 9220

  Installation of device HP

  427 UDP port

  Web Services

  80, 443, 5222 and 5223

  Any change? I appreciate your persistence!

• Unable to connect to the net work. Saying error 'not connected connection .no available' in my network icon

  Hi all

  I restarted my PC once with the update finished. But this time on words - Ethernet connection was failed No. my PC. I also checked the connectivity cable and the State in the network connection window. It detects in but not possible to ping with my firewall device and other network device .not get internet also.

  Type the command ipconfig in command prompt, it is show only windows IP configuration

  More about things I did to solve the problem

  • Uninstalled from the PC and once restarted network driver, but automatically install new driver with the same situation
  • Tried with another network driver
  • Checked with another connection of cable network
  • Not updated the driver (previously, I also said do not have Internet access so how!

  I share my system and the OS details below

  OS: windows 7 Professional 64-bit

  System: HP Compaq dx 7380MT

  Connection: Wired

  Please someone share me your idea to solve this problem

  Hi Renon,

  I imagine the inconvenience that you are experiencing. Your efforts to solve this problem is highly appreciated.

  Exactly how you did update the network adapter driver?

  You can follow the steps in these articles the Microsoft KB and check if this may help:

  Why can't connect me to a network?

  http://Windows.Microsoft.com/en-us/Windows/cant-connect-to-network#1TC=Windows-7

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-7

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• All of a sudden my AutoPlay does not work. I tried changing the settings but nothing seems to work. Help, please.

  It was just after I downloaded a newer version of itunes.  I tried to do a system restore on it, but it did not help.

  I was wondering... you already tried system restore...
  It restore your system but just don't
  fix AutoPlay?

  Or... She didn't have to restore your system?

  ===

  No guarantee... but if you're comfortable editing
  the registry, the following article may be worth a visit:

  Proceed at your own risk *.

  AutoRun/AutoPlay does not work when a CD/DVD is inserted
  http://vistasupport.mvps.org/autorun_autoplay_don't_work_when_cddvd_is_inserted.htm And... the following links may be worth a visit:

  (982116) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116
  (Windows XP / Windows Vista / Windows 7)

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

• I have Dreamweaver CS5 with Windows 8, and it will not stay connected to the server and it says: I need flash plugin, please help

  I have a Gateway with Windows 8 computer is installed.  I installed Dreamweaver CS5 to manage my Web site, and it will remain not connected to the server.  Also, it will not play flash and said I need a flash plug-in.  Help, please

  #1, try the FTP mode passive switching power in the definition of your remote server site.

  

  #2 with the exception of a handful of gaming sites, Flash is a web technology dead.  It is not taken care of by iPhone, iPad, iTouch, Android, etc...  I don't recommend to use Flash for anything these days.  Better to use HTML5, JavaScript, and CSS level 3.

  Nancy O.

• Telstra new 4G Dongle does not connect to the internet - old 3G should be. Need help please.

  Can be contacted at * address email is removed from the privacy *.

  See you soon
  George

  Contact Delstra for support with their product.

• WIFI disabled on windows vista and cannot wireless connect to the net

  WIFI disabled on windows vista and cannot wireless connect to the net, but bluetooth wireless Wi - Fi and fine switch is activated. Have a problem with ISATAP #5 who is incapable of solving that can be bound.

  All of a sudden I lost my internet connection wireless and I am unable to return.  May be because recent windows update.  Error messages on the wireless assistant say WLAN offshore or disabled.  I have tried every fix.

  In device Manager (under network adapters) shows also that MS ISATAP disabled with "Windows cannot load driver (Code 31).  When I try to update the driver, "Best driver already installed" appears.

  Is there a way to FIX?

  http://support.Microsoft.com/kb/932520

  Read the above re ignore this error message.

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• do not connect to the net

  my other laptop does not connect to the net it's say no wireless perferred fo this computer are in range, but it has always worked before until I change 02 to sky what should I do to fix this

  Hello

  Look in the Wireless Manager and remove the old entries.

  http://www.ezlan.NET/Vista/wireless_manager.jpg   (Control Panel, network and sharing Center. Upper-left click Manage wireless networks.

  After cleaning, opening of session of taskbar tray wireless icon.

  Given that your wireless network is more in the preferred list, it will prompt for the password. Put the password that is current, and if all goes well it will connect.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Win7 64 bit, connects to the router, but no error internet access-"page not found".

  Original title: Win7 64 bit, connects to the router but no internet access.

  Help! Windows 7, XP Home Edition Premium, 64 bit, connects to the router and I can access the network. However, I can't access the internet. PC was working fine until a few days when I was using IE Explorer and I suddenly got the error "page not found". This pc internet connection uses the onboard network controller. I rebooted the pc and used the option "safe mode with network. The pc worked fine and I had access to the internet. I restarted the pc and still no access. I tried a usb wireless adapter. No luck. I have not installed updates or software recently. My other 2 PC works fine. I tried to use the network troubleshooter and he could not find any problems.

  Hello

  1. Have you made changes on the computer before this problem?
  2. What antivirus application do you use?

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Keep the computer in a clean boot and check the status of the issue. If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem. Continue with the remaining steps to pin-point on the third party service. After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.

  http://support.Microsoft.com/kb/929135

  Note: Please go up to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem

  Method 2:

  I would suggest trying the following steps and check the status of the question.

  a. open Internet explorer.

  b. click on tools, then on Internet options.

  c. click on the Connections tab.

  d. click on LAN settings.

  e. uncheck the option use a proxy server for your LAN .

  f. save the changes by clicking on apply and ok.

  Method 3:

  Configure Internet Explorer to disable simplified HTTP error messages and check the status of the issue.

  a. on the Tools menu, click Internet Options.
   
  b. on the Advanced tab, in the browsing section, disable friendly HTTP error messages display check box and then click OK.

  c. close Internet Explorer.

  d. restart Internet explorer and check the status of the issue.

• WiFi is connected but I can't connect to the net, what to do?

  WiFi is connected but I can't connect to the net, what to do?

  Hi Torrespa,

  1. what happens when you try to connect to the internet?

  2. were you able to use the Wi - Fi connection earlier?

  3. what brand & model of network card?

  You can follow this link & check if the problem persists:

  How to fix wireless network connections in Windows XP Service Pack 2?

  
  Reference: Wired and wireless in Windows network connection problems

   To set up automatic wireless network configuration

  Hope the helps of information.

• Recently I connect to the net via hspa(3g) on windows 8 and try to download the apps store but stuck at 0% and if stucks to waiting for a break.

  I installed the Windows 8 32-bit operating system on my laptop.

  Recently I connect to the net via hspa(3g) on windows 8 and try to download the apps store but stuck at 0% and if stucks to waiting for a break.
  updates are available, when I install the updates, repeatedly paused at any time.
  I left it for download for hours, to no avail.
  I would like to say that my windows is activated and my laptop have win8 and double windows win7.
  I found the result in microsoft technical support by restarting the update through cmd, but in its service also not worked.
  Please help me in this topic, there are lots of apps in the store that I want to download but can not download.
  Please help................................................................
  Thanks in advance
  Original title: Apps are not download

  Hi imran,.

  I solve my problem of the post of the same problem. There is the correct method, i.e.
  By pressing win + w, then typing troubleshooting and choosing the troubleshooting in the windows updates.
  Then he fix something and fix my problem.
  Thnak you for taking interest in my problem.

• At the opening of some Web pages I get a msg 'unable to connect to the server', but it works very well in startup

  The last few days during the use of the internet, some Web pages will not be not open. I get a msg of error saying 'unable to connect to the server', but it works very well with other sites such as Facebook and YouTube.  This happens when I use Safari, Firefox and Chrome.  Yet if I'm in Safe Boot mode it works fine.  I exaggerate the App installed VPN and when I am in normal mode and connect to the VPN exaggeration, all Web pages work correctly. I searched the net for days trying to find a solution but nothing I tried worked.  I'm not very computer savvy either so don't know much of what I do with this technical stuff.  I emptied the caches, but that did not work.  Following the advice of an answer to another question on this forum that was similar to mine, I went into the Terminal and performed a diagnostic test.  I don't understand all the information in this essay so hope someone here can decipher. The report is quite long, but this is the beginning of the pasted below.  Help, please!

  The system version: OS X 10.11.1 (B 15, 42)

  Kernel version: Darwin 15.0.0

  Boot Mode: Normal

  Model: MacBookPro11, 1

  FileVault: on

  The System Diagnostics

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  Diagnosis of the user

  2016-04-12 AssetCacheLocatorService crash

  Accident of GarageBand 2016-04-12

  Kernel messages

  Apr 12 15:34:15 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 15:34:15 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 15:34:18 NTFS-fs warning (device/dev/disk0s4, pid 165): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 15:35:41 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 520; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45019

  Apr 12 16:45:59, launchd process [1]-l' system of limitation of disabling i/o level

  Apr 12 16:45:59, launchd process [1] disable the CPU - the system-wide limit

  Apr 12 16:46:31 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 16:46:31 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 16:46:33 NTFS-fs warning (device/dev/disk0s4, pid 155): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 16:47:52 iCoreService process [94] taken causing excessive Awakenings. Awakenings (per second) rate: 557; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45052

  12 apr 17:20:51 0xe00002db questioned the file opening error

  -the last message repeated 1 time.

  Apr 12 19:39:26 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 19:39:26 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 19:39:28 NTFS-fs warning (device/dev/disk0s4, pid 158): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 19:40:49 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 545; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45066

  Apr 12 20:46:58 launchd process [1]-l' system of limitation of disabling i/o level

  Apr 12 20:46:58 launchd process [1] disable the CPU - the system-wide limit

  Apr 12 20:47:21 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 20:47:21 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 20:47:23 NTFS-fs warning (device/dev/disk0s4, pid 157): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 20:48:44 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 545; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45476

  Apr 12 21:54:58 opening error 0xe00002db questioned the file

  -the last message repeated 3 times.

  Apr 13 01:42:49 deal with com.apple.WebKit [12265] wire 546051 caught fire CPU! He used more than 50% of the CPU (actual recent use: 93%) more than 180 seconds. Screw using the processor to life 90,030145 seconds, (89.468979, System 0.561166 user) information book: balance: 90000757669 credit: debit 90000757669: limit 0: 90000000000 period (50%): 180000000000 time since last filling (ns): 96164617988

  Hi AussieEgypt,

  Thank you for using communities Support from Apple.

  If a problem does not occur when it is started in safe mode, then you have already determined that the problem was isolated to a few 3rd party software running on your Mac.  Take a look at the information below to start with the removal of some elements of start-up and connection and see if the problem persists:

  Test your login items

  1. Choose the Apple menu > System Preferences, and then click users and groups.

  2. Click on your account under the current user name, and then click connection points.

     Make a list of the login items, you will need to remember later.

  3. Select all the elements of connection, and then click the button Delete .

  4. Choose the Apple menu > restart.

  5. If this solves the problem, reopen the preferences users and groups, add the elements of connection one at a time and restart your Mac after the addition of each of them.

     If the problem persists, follow the steps above to remove only the last element of connection that you added.

  OS X El Capitan: If you think you have incompatible connection points

  See you soon.

• I'm locked out of my ipod5 that I have not used for a long time, it is not connected to the Internet or iTunes is anyway can I unlock?

  I'm locked out of my ipod5 that I have not used for a long time, it is not connected to the Internet or iTunes is anyway can I unlock? In my opinion, it works on IOS8. Because I have not used in a long time, it has reset and does not connect to the wifi until I unlock, and I forgot the password to unlock it. I tried to clear up my iPhone but it requires Internet and iPod can not connect to Internet ithe, I also tried to restore the 'home' button and the lock button while connected to iTunes on my computer and that did not work either... Please let me know if I haven't tried something or have missed something.

  Thank you

  You have to follow the instructions for the erasure or use recovery mode in iTunes again. . You do not specify what happened when you tried to follow these instructions, or instructions for iTunes, which you tried to follow, but you will be able to exit the mode disabled via iTunes if you do not have Wifi:

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

  See you soon,.

  GB