Unable to connect to the net work. Saying error 'not connected connection .no available' in my network icon

Similar Questions

• Windows XP crashed, now unable to connect to the net cause usb 760 not register

  Windows xp installed 2 GB high speed, downloaded 99% vzam, froze, rebooted, frozen, restored before installation, froze, now run anything? What should do? Unable to connect to the net cause usb760 will not register...

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message? If Yes, what is the full and exact error message?

  Method 1:

  See the article and check if that helps:

  To establish an Internet connection

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/howto_i_client.mspx?mfr=true

  Method 2:

  Try to run Microsoft Safety Scanner for any malware or spyware infection and check if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Window media player saying error not install proplerly and must be reinstalled both on the low loading page do not work 7n and 7 k how can I reinstall WMP on win 7 home premiun?

  Window media player saying error not install proplerly and must be reinstalled both on the low loading page do not work 7n and 7 k how can I reinstall WMP on win 7 home premiun?

  Is - this Windows 7 32-bit or 64-bit edition?

  Open the Start Menu, go to all programs - Accessories , right-click on command prompt and select run as administrator . At the command prompt, type the following command:

  sfc/scannow

  and press ENTER. Let it run until it ends. If it finds no problems, and if so, is he able to correct? That you still get the error then?

  Tim Baets
  http://www.BM-productions.TK

• went to use creative cloud and it won't let me open photoshop, says need to renew the subscription, but says page not found, I was paying £15 a month for it, hope you can help as soon as possible because I need to use it for my United work

  went to use creative cloud and it won't let me open photoshop, says need to renew the subscription, but says page not found, I was paying £15 a month for it, hope you can help as soon as possible because I need to use it for my United work

  Hello

  Maybe it's an activation issue, please see the link https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  Kind regards

  Gag

• When turned on the computer it says - Error loading C:\WINDOWS\aluzonah.dll - the specific module could not be found

  When turned on the computer it says - Error loading C:\WINDOWS\aluzonah.dll - specific module is not found - the computer seems to work very well however.

  When turned on the computer it says - Error loading C:\WINDOWS\aluzonah.dll - specific module is not found - the computer seems to work very well however.

  A Google search for this returned no success other than your own message.  This suggests that the file refers to malicious software.

  You have a recent version of an antivirus with a current subscription application?  Have never leave you the subscription expires?

  Startup like these messages can occur if your antimalware application has deleted the payload real malware but has failed to clean up the start of the call.

  First download, install, update and run the following applications of malware free 2 the possibility that one or the other will detect and remove these remains (as well as anything else that your original scan could not detect):

  Malwarebytes

  SUPERAntiSpyware

  If these two applications running is not the message disappears, you will need to know where the call to the missing dll file is now done.  The best tool for this is AutoRuns:http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx the main problem with the help of AutoRuns is that he finds the startup items as much as it can be a little overwhelming. One of the good features of AutoRuns is that you can prevent an element of commissioning by unchecking the box, but if you decide that you really want to start, just re-check the box.  Once you are sure that you will never need of the item to start, remove it.

  Typical advice is to check the logon tab, but because the now-absent file is a dll, it is not likely to appear online in the logon tab.  Yet, take a look at the connection tab and if aluzonah.dll is there, or if there is a line of starting an application of suspect search, a Google search suggests is malware, uncheck the box and restart.  If the entry is far, re - run AutoRuns and remove the line.

  The next place to look is the Winlogon tab, which should have little, or no, entries.

  If you have not yet found the wrong entry, click the all tab, click the top row and then click on file > find and search for aluzonah.dll.  If you find an instance, uncheck the box and then manually move the selection on the following bottom line then press F3 to "search again".

• If I try to check my students / teachers / students of Creative Suite by sending my student card the next page says "error".

  If I try to check my students / teachers / students of Creative Suite by sending my student card the next page says "error". How can I check my trial version and turn it into a full if this link does not work?

  Hi Jana,

  You will need to contact support by calling/chat for this request.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Kind regards

  Sheena

• When I share HP LaserJet 4200 printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file missing

  Original title: Reader for printer HP LaserJet 4200 for Windows 7 gives problem

  My hp laserjet 4200n printer is connected to a print server of XP through the parallel port, when I share this printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file I already Miss down site fromhp driver loaded but invain.

  Please suggest

  Hi Mohammed Arif a. R,.

  You can try to plug the printer again and check the updates of Windows and see if the drivers are install.

  Install Windows updates in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  You can also view the following HP Web site and try redownloading drivers and check.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=84033&prodTypeId=18972&prodSeriesId=84028&swLang=8&TaskID=135&swEnvOID=4063

  Also check out the following link and try the suggested steps.

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Note: This article also applies to Windows 7.

  Hope this information is useful.

• I use a dvd - r disc, but the movie maker says is not a recordable disc

  I use a dvd - r disc, but the movie maker says is not a recordable disc. also, when I try to publish the dvd is not the choice, her computer, a recordable cd or camer digital video...

  If you're running Vista Home Premium or Ultimate...
  the following article is perhaps worth the drive... If not...
  You'll need to publish (your Movie Maker save project)
  in the. WMV video format and the use of third-party software
  to burn your DVD.

  "Import files into Windows Movie Maker" "publish and burn a movie to a DVD.
  http://m-Lov.blogspot.com/2007/11/you-can-use-Windows-Movie-Maker-to.html
  Scroll down to: "2 to publish and burn a movie to a DVD")

  If you need DVD Authoring software... What follows
  freeware software can be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.dvdflick.NET/Download.php
  (the download is: "dvdflick_setup_1.3.0.7.exe")

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

• Try to open the .pub file - get error not valid Win 32 application

  Try to open the .pub file - get error, not a valid Win 32 application

  Help, please

  Thanks for your suggestions.  I have both Publisher and InDesign.  I was able to open this type in the past using Publisher. ???

  Hey bets4jandj

  It helps when you provide in your first post information about what programs you have pertaining to your problem

  Make sure that they have all of the defaults and set file associations correctly

  read the information below about

  http://articles.TechRepublic.com.com/5100-10878_11-6172036.html

  Walter, the time zone traveller

• When you plug a usb (zip) without box drive appears... says the device works but is not

  I went into Device Manager and it shows the driver and says its working properly, but wallpaper said safe deletion of material, and I can't transfer all files from the USB.  I tried all ports on my pc...

  Hello

  You find the USB in the computer and disk management?

  Try the following steps:

  Step 1: Run the Fixit tool from the link below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Step 2: Check if the device is detected in disk management. If it is detected, and then format the disk and assign a drive letter.

  Follow these steps:
  a. Click Start, and then type diskmgmt.msc in the start search box and press ENTER.
  b. If you can see the USB drive, then right-click on it and click on format.

  See this link for more information on how to assign a drive letter:
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why windows media player stops after playing four titles through the nwtwork using the net work receiver Onkyo 808'

  After you have configured my network using Windows media player player I can't play more than four tracks, then the reader falls asleep. What can I do to fix this problem.

  Hello

  Thank you for the question to Microsoft Community. I'll give my best to help you.

  1. what operating system is installed on the computer?
  2. the problem only occurs during playback of media via network?
  3. don't you make changes to the computer before the show?
  4. What is the accurate and complete error message you get?

  Method 1
  I suggest you to run the fixit from the following link:

  Fix Windows Media Player video and other media or http://support.microsoft.com/mats/windows_media_player_diagnostic/ question library

  Method 2: I suggest to uninstall and reinstall Windows Media player, and check if that helps.
  
  Uninstalling and reinstalling Windows Media Player:
  Step 1: Turn off Windows Media Player:
  a. go to start and in the search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find multimedia and uncheck the brand in the face of Windows Media Player.
  d. restart the computer
   
  Step 2: Enable the Windows Media Player:
  a. go to start and in the search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find the multimedia functions and place a check mark in front of the Windows Media Player.
  d. restart the computer.

  Turn on or off Windows features
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

• Satellite Pro 6100: unable to connect to internet via wireless network

  Have had some problems with the audio device Yamaha for another thread, which now seems to be resolved. Thank you!

  However, do not know why, but now unable to connect to the internet via a wireless network, although the router works well as another computer in the House is connected wireless.

  When you check the available wireless networks it comes up with "no wireless networks were found in range, make sure that your computer's wireless switch is on.
  Where to check it, can anyone help?

  Thank you

  On the left side, there is WLAN switch. Make sure that the switch is in on IT. After doing this using FN + F8 key combination and activate WLAN device.

  After having done that, you should be able to see the WLAN networks available in your area.

• Unable to connect to ground or wireless network

  I can't connect to my land or wireless network.  I tried to connect through my laptop to work and land / wireless worked as expected (e.g. problem is not with the router).  Previously, I was able to connect to the network via my computer at home.  Some information:

  1. I get the following message when I consult my network connections:

  "Connection status: unknown.

  The dependency service or group was able to start. »

  2 Windows cannot find any wireless networks in range.

  3. I tried to use Windows Network Diagnostics and the message I got was "The Windows Wireless Service is not running on this computer."  I tried to start the service, but couldn't.

  I would appreciate any you can give troubleshooting tips!  Thank you.

  Hi Kelly1986,

  1. what happens when you try to connect by using wired connection?
  2. do you have security software installed on the computer?
  3. did you of recent changes on the computer?
  4. What is the error message when the service started?

  First of all, I would say that check you what happens when you connect using the wired connection.

  Check also in mode safe mode with Networking if you are able to connect to internet using wired connection.

  Steps to start in safe mode with networking
  1 restart your computer if it is running.
  2. press the F8 key after your initially on powers computer.
  3. Once you see the menu Advanced Startup Options , you can stop tapping.
  4. use the up/down arrow keys to highlight your selection.
  5. Select Safe Mode with network and pressenter.
  6. you should see loading drivers and wait please.
  7. you should then be at the Welcome screen.
  8. connect to your computer using an account with administrator privileges.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode

  Disable the security software on the computer and try to start the service and check.

  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  If you still cannot start the try running SFC scan service that would have a search system files corrupted on the computer and replace them.

  For more information please visit the link below.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Solve problems, find wireless networks
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  The problems of Internet connection
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Go back with the results!

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to connect to other Windows 7 network devices - 0 x 80070035 and 0X80004005 error codes

  I have a network consisting of Windows 7 laptop computers, an XP laptop and a Wireless Linksys (Cisco) WRT610 N + N with storage attached to it via its USB port.  Your PC Windows 7 has, since I can see and access to other computers and devices on storage.  Since Windows PC B I can not connect (via the file manager) to A PC or NAS storage network.  Get such as 0 x 80070035 and 0X80004005 error codes when you try to connect to the IP address on the device name.  When I ping the devices of PC B I have no trouble to achieve.

  I turned off all firewalls, added the LMHOST file entries and a myriad of other tests and still cannot connect to PC B devices.  I can surf the net fine and do everything else - simply cannot connect to other devices even if these other devices can connect to me.

  I was in there for 22 years and has worked as an engineer on major networks and the network I stem - anyone got any idead. I checked all the basics such as Netbios, file sharing etc etc.

  Here is the Vista Forums.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• The 'Net View system error 6118' command prompt

  Hello, I use windows 7, and just to know function prompt on other devices connected to the network, so I typed a clear view into the command prompt, but it displays error 6118 and list of servers for this workgroup is not currently available. Please advise me by giving your necessacry steps. Thank you

  Hello

  NET VIEW command is used to display a list of computers or network resources. The NET VIEW command displays a list of computers in the Group of specified work or shared resources available on the specified computer.

  Click on the link below and see if it helps.

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/thread/fb6210f7-8167-4FA3-b0ea-ce71426e5fc3

  Good day!