I am considering the removal of GarageBand and iMovie to save memory?

Similar Questions

• No sound after the removal of Norton and Mcaffe installation

  No sound after the removal of Norton and Mcaffe installation

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• Question about the browser inside "sandboxie" and download to save an attachment?

  Hello

  I am very new to sandboxie. So please excuse my ignorance.

  I have the browser open inside sandboxie where I'm going to my gmail. I have an email from my son with a photo attachment. I have no trouble to consider this picture.

  However, I just found out that I couldn't save this picture on my computer HD. In sanboxie E-mail when I chose to save it in a folder in my computer HD shows like saved but when I close the browser and open my folder where I saved the photo allegedly - I can't find anything...

  So I guess that's the protection offered by sandiboxie?.  So if I need to save items of all reliable e-mails, I open my browser off sandiboxie to run my download?

  Concerning

  Snow,

  Yes, one of the goals of Sandboxie is to keep isolated... things so that, if you have accidentally downloaded a virus, he would be stuck in the sandbox [rather than infect your real system].

  Right-click on Sandboxie icon in your system tray, select Show THE WINDOW, the sandbox SAND SANBOX SETTINGS tab, DEFAULT ZONE.   On the left, click on the + sign of RECOVERY, to develop to reveal a QUICK RECOVERY.   You should see several locations of files listed there... perhaps including DOWNLOADS, DOCUMENTS, FAVORITES, or DESKTOP (even though I think some of your own peut be different).    You can add other folders of your choice.   These 'Fast food' files indicate the main areas where you want THAT Sandboxie really save files on your drive.

  It is spirit, back to your email address and see if you can direct download of your photo accessory in one of these files in particular.   When you do, you should see a popup of Sandboxie, indicating that the file is eligible for recovery, which means that it can be moved out of (side) of the sandbox.   I said in general to recover in the same folder (on my real system, as it was tyring to save in the sandbox).   And click on the RECOVER button.   If get you there, it should do the trick.

  There may be other ways to do it... but this method works for me.

  Also (now that you know where are the settings), there should be a setting to ask you to empty the sandbox when you exit the program... and it should also let you know that you have lingering there files which will be lost if saved.

  EDIT: actually, I just closed my browser sanboxed, not through QUICK-picked UP a file... and I get a screen to DELETE the CONTENTS of Sandboxie, again reminding me that I can still get the file [or well, delete the content of the Sandbox].   Certainly, it's been a while since I have set up the program, so I don't remember if it was a default option, or something I've tweaked.

  Edit2: There is a short tutorial for using Sandboxie http://www.sandboxie.com/index.php?GettingStarted , which if you have the time, elaborates on this (in parts 4 and 5 of the tutorial).

• Problem with the Removable Storage Service and Microsoft Fix it 50198

  I updated Windows XP computers in an office from Internet Explorer 7 to Internet Explorer 8.  During the process, the installation gave me security errors.  I resolved to fix these errors by running Microsoft 50198 recommended in troubleshooting Internet Explorer 8.

  The facility has been able to complete, but there is a new problem.  All computers that require this hotfix are now unable to use and USB storage media.  The following error is generated in the event log:

  Event type: error
  Event source: Removable Storage Service
  Event category: no
  Event ID: 111
  Date: 15/03/2011
  Time: 12:48:09
  User: n/a
  Computer: WCML-HNCX5J1
  Description:
  RSM could not load media in drive drive 0 of library SK_USB20 drive Flash USB Device.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
  Data:
  0000: 01 00 00 00...

  I am logged in as an administrator and have tried several different USB media with the same results.  I am posting this in the security group as it seems to be linked to security changes made by Microsoft difficulty he 50198.  Other computers that do not need this fix do not have the same problem.

  Thank you for your response.

  I'm working on it, I think I found my problem.  These computers are part of an area in which I do not.  They will be removed from the field in a few weeks as they are separate from this company.  The area has some group policy settings that limit to me logged on as a local administrator.  I think I'll have to wait until computers were removed from the field to solve this problem.

• local disk c is missing the option to defragment and unable to save

  Hello

  I used to defragment my Local C drive, but suddenly the location disappears from the list to defragment.
  Then I tried to back up my laptop, but rather that I got this message:
  Windows skipped C:\Users\Han\Documents backup because it is about corrupt C:\ drive.

  Windows skipped C:\Users\Public\Documents backup because it is about corrupt C:\ drive.

  Windows skipped C:\Users\Han\Music backup because it is about corrupt C:\ drive.

  Windows skipped C:\Users\Public\Music backup because it is about corrupt C:\ drive.

  Windows skipped C:\Users\Han\Documents backup because it is about corrupt C:\ drive.

  Windows skipped C:\Users\Public\Documents backup because it is about corrupt C:\ drive.

  Windows skipped C:\Users\Han\Pictures backup because it is about corrupt C:\ drive.

  Windows skipped C:\Users\Public\Pictures backup because it is about corrupt C:\ drive.

  Windows skipped C:\Users\Han\Videos backup because it is about corrupt C:\ drive.

  Windows skipped C:\Users\Public\Videos backup because it is about corrupt C:\ drive.

  Windows skipped C:\Users\Han\AppData\Roaming backup because it is about corrupt C:\ drive.

  Windows skipped C:\Users\Han\AppData\Local backup because it is about corrupt C:\ drive.

  Windows skipped C:\Users\Han\AppData\LocalLow backup because it is about corrupt C:\ drive.

  Windows skipped C:\Users\Han\Contacts backup because it is about corrupt C:\ drive.

  Windows skipped C:\Users\Han\Desktop backup because it is about corrupt C:\ drive.

  Windows skipped C:\Users\Han\Downloads backup because it is about corrupt C:\ drive.

  Windows skipped C:\Users\Han\Favorites backup because it is about corrupt C:\ drive.

  Windows skipped C:\Users\Han\Links backup because it is about corrupt C:\ drive.

  Backup Windows ignored C:\Users\Han\Saved games as it is on corrupt C:\ drive.

  Windows skipped C:\Users\Han\Searches backup because it is about corrupt C:\ drive.
  The C drive is still accessible, but I need to backup my data.
  How can I solve this problem?

  Hello

  Before troubleshooting, provide us with information.

  1. What is the brand and model of the computer?

  2. what security software is installed?

  3. what applications are you using to back up data?

  4. to where you save the data?

  5. don't you make changes to the computer before this problem?

  Start the computer in safe mode and do a virus scan. After the virus scan, remove or delete the infections found and restart the computer. After reboot, check the status of the issue.

  Advanced startup options (including safe mode): http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-safe-mode

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• I just downloaded the version 6.02 and clicked on "Save" in the box that is displayed. Is this right?

  Usually, there is an option "Run" for a new file. I didn't not see an and wonder if the new version will now run on my computer, or if I just saved to my save files. I am a real novice at this.

  It's in your backup files. Double click it to install it.

  Thank you

• At the beginning; After the Windows Logo at the start, the screen goes black and a POWER SAVE MODE comes up. I must stop button. I can run the computer as I am now in Mode safe mode with networking.

  When I turn on the computer of gateway, the machine starts and the initial window logo starts and runs for about five seconds.  Then the screen goes black instead of blue and stays black for about 10 seconds.  A 'Power SAVE MODE' appears.  The machine is dead to all orders.  I have to stop by pressing the off button.  I can turn back and the F10 key to get in Mode safe mode with networking.

  I tried to reinstall Windows XP original but it would erase my files.  I tried to restore the last good configuration also knowledge.  That did not work.

  The change came after a Windsows update.  I have McAfee security and I asked Windows but could not use due ot a conflict. -C' is all this bad start.  Clues?  I use Negear.  No change when I hooked directly either.

  Botton line, I can run in SafeMode with networking; but it is slow and I can't make alll I have to do.  What does not load Windows?

  http://wiki.answers.com/Q/How_to_get_out_of_power_save_mode_when_computer_screen_is_black

• Equium P300-16 t BSOD and black screen after the removal of GPU

  I have a Toshiba Equium P300-16 t and I was getting 90 c - 95B on realtemp so I bought a thermal paste of isopropol alcohol and yesterday that I changed the thermal past on the CPU and the GPU.

  When I booted up after that there was a long beep that lasted a few seconds and my speakers a few cracking apart from that everything was normal, but then after a few minutes my screen is odd (for example, green artifacts) and then went black.

  After awhile, I started my laptop to the top and the same thing happened with the speakers and a beep but the screen was fine. I opened realtemp and became c 65 - 70 c, then restarted because of an Avast update.

  Now, when I turn on my laptop the screen becomes either black or I get a BSOD 0x0F4. I tried to boot from a USB Win7 and repair, but the rest screen went black, so it is not a HARD drive problem as some sites say (from the BSOD error).

  BSOD is mainly a product of serious software problems or it seems due to a malfunction of the equipment.
  I guess this is NOT question related software since you don't touch software (am I right?). So I think you damaged somewhere during the disassembly of the laptop or the removal of CPU and GPU.

  I have no other way for you to control the affected parties? How?
  I guess you need a help from a technician who would be able to analyze the material for potential problems.

• I have a problem with the computer is slow and does not file.

  1 of my pc and 1 another laptop, both with same OS - win 7 starter, atom and same ram and Ghz processor.

  The the Task Manager on the two of them performing at about 50%
  I use wifi and same place,
  always pages on my pc are load too late, manyatimes same gmail takes more than an hour to load or load never at all.
  Live TV on my pc crashes a lot and the clarity of the video is too bad, although the same graphics card, wifi, etc. are used.
  Any recommendation to get rid of these problems?
  2. some viruses had infected my pc,
  I tried to scan my pc and the USB with 2 antivirus free and pay different and even contacted the companies and sent them files. But I got no solution.
  On my pc, the files opens, show that a few errors before you open it then on my cell it do not open at all. Only shortcuts are displayed, while the USB is to have 4 GB of data.
  The companies had scanned all files that are intended for them and had recommended some solutions, but none of them worked and I was faced with the same problems.
  It was queries that I had sent to the antivirus company-
  10-20-bitdefender files that are
  > infected. They were initially on my USB, then I connected to another
  > pc. After that, when I connected to my pc, I scanned and that she was
  > no virus. Then the ameliiecouturiaux and the files whatever i seclect opened in a
  > new window and took that wasannoying time. So I copied all the files to my
  > pc, yet once scanned, formatted my USB and then comes the againNow copiedit the
  > problem - all the icons or folders remain the same with the name of the folders but
  > the files inside this foldergot automatically changed and I lost all my
  > data. Now, I can't find any of my files on my pc or my USB. PL send me
  > an email so that I canattach the files and send them to bitdefender. Dungeon of pl
  > secure these files. Some files have an another new error that I had
  > downloaded. More files will be downloaded once I have bitdefender recieveemail to
  
  > that I can answer. PL copy this message in its entirety and add this to your answer.
  According to my knowledge, 2 of my PC are infected and the virus are not getting detected by bitdefender on my PC1 but 4 threats have been detected on the laptop...

  The same files are include the other way on my other pc.

  Whenever I open the files, save option opens and a new file is saved with the file tha but they never get to open in word or powerpoint, only the backup option is displayed.

  The original files are protected by copyright and are lost. PL help me if possible to retrieve and delete all the files once the inspection is completed. You can forward this message to any authorized person.

  Attached files have changed to 1 or 2 k, but there was initially datas in a few MBs.

  201310131003535. I mentioned that somewhere I had formatted the USB key. Just before that, I had copied all files by selecting CTRL A and cut all the files in a directory on my PC. Then I opened the USB and no files were there. But always around 4 GB has been shown as being busy on the USB stick before formatting.
  My pc takes too long to restart, I tried a few 3 - 4 times and no updates have been installed or waiting to install after the 2nd time but when even he took more time than usual to restart and is compared to the other pc taking 2 X the time to restart, but two of them have installed bitdefender. Problem in my laptop toshiba, not pc lenovo, space time with more than 50 percent on the disk processor and Atom c.
  The files on my USB key are automatically replaced by shortcuts and so files open in a new tab and new cases opened are not those of origin who have been saved by me in this matter. Yet once I formatted and scanned, files, pc and USB but still facing the same USB key.
  Problems-

  1. all files are automatically displayed as shortcuts, even if I had pasted the original file

  2. once I click on open, I get an error and then after clicking on ok, some files get opened

  Before sending the email, I had formatted the USB scanned files on my HARD drive and then copied on the USB. The same problem persists. I think that when the files are displayed or open, the virus does something and change his behavior wrongly.

  1 bitdefender watch as new bitdefender is available, I click ok and repair wire starts and then it tells the system to restart.this cycle continues on the race

  2. 2 files are missing (attachment)

  3. could you send me the file by e-mail?  You can also download the link below.

  http://labs.BitDefender.com/

  because the webste or browsers (chrome, firefox) are not respongding.

  4. I could get these 2 points. Browse your computer to locate the removable storage device and right click

  its icon.
  3. in the shortcut menu, point to Bitdefender and select immunize it
  
  drive.
  I am able to open my pendrive ffrom on 1 pc but on my laptop, all the files don't appear as shortcuts 1-2 KB and can not access.
  zwhwenever, I click the icon, the window save under opens for all files.
  on this pci usingbitdefender antivirus am more 2013 16.34.0.1913 downloaded from download.com and the antivirus from bitdefender 60 seconds. 1.0.3.59
  my pc shows the USB key as safe, but laptop with 2 antivirus mentioned above are showing 2 virus - worm.vbs.ch (bitdefender 2013)
  using bitdefendr 2013 more on laptop, I tried to immunize the file but an error was encountered.
  the error is in German-
  Der process nicht auf die Datei zugreifen kann, da sie von einem other process verwendet wird. I closed all the files and tried to immunize the USB of the my computer without having to open the USB by clicking on it.
  Itried to remoe and atach the pendriveagain and even restarted the laptop, but the same error message appeared.
  Properties - 5.10 GB ref 7.89 GB, but when the USB wasopened, all files were only 2 or 3 KB of size.
  1 more problem-i tried to delete the files in quarantine but bitdefender stopped working and went off automatically.
  I copied all the files from USB to pc, they were 2.22 GB, then again, I copied them back after scannig and formatting of topendrive and it was only 1.44 GB
  BitDefender Antivirus 2013 never works and always displays the message to restart the laptop so that it can start working, but it neverstarts. But bitdefendeer 60 seconds work.

  LOL - install software Registry Cleaner to fix damaged or broken registry entries.

  More likely to worsen the situation.

• Admin Console - requires that the user Admin password and user name valid

  I am running FMIS4.5 on CentOS5.5

  FMIS runs and I can connect via Flash Media Encoder.

  Displays and Web administration console: 1111 gives the xml output, however

  During the use of the user and the password in my xml files to connect (tests with ping), I get the error "user Admin password and valid user name required.

  conf/FMS.ini:

  ###########################################################################

  # fms.ini contains alternative to Flash Media Server variables #.

  # the configuration files. Lines beginning with ' # ' are considered comments.  #

  # A variable substitution is in the form < name > = < value >. All the way to #.

  # the first '=' is considered the substitution variable name and #.

  # everything after the first '=' is considered the substitution value. If #.

  # you want a substitution variable to have beginning or trailing spaces.

  # include double quotes around the value. For example, foo ="bar" #"

  ###########################################################################

  ###############################################################

  # This section contains configurable settings in the Server.xml file #.

  ###############################################################

  # Username admin server

  # For example:

  # SERVER. ADMIN_USERNAME = foo

  #

  SERVER. ADMIN_USERNAME = Admin

  SERVER. $admin_password = str34m1ng

  # Port and Flash Media Admin Server IP address must listen to

  # For example:

  # SERVER. ADMINSERVER_HOSTPORT =: 1111

  #

  SERVER. ADMINSERVER_HOSTPORT =: 1111

  # User Id in which to run the process (Linux only)

  # For example:

  # SERVER. PROCESS_UID = 500

  #

  SERVER. PROCESS_UID = 500

  # GID in which to run the process (Linux only)

  # For example:

  # SERVER. PROCESS_GID = 500

  #

  SERVER. PROCESS_GID = 500

  # Key license for Flash Media Server

  # For example:

  # SERVER. LICENSEINFO = XXXX-XXXX-XXXX-XXXX-XXXX-XXXX

  #

  SERVER. LICENSEINFO = #SORRY YOU DON'T GET TO SEE THIS #.

  # LIVE_DIR is the full path of the sample application 'Live '.

  folder # to store any live streams recorded by the server.

  # For example:

  # LIVE_DIR = \applications\live < FMS_Installation_Dir >

  #

  LIVE_DIR = / opt/adobe/fms/applications/live

  # VOD_COMMON_DIR is the full path to the sample application "VOD".

  folder # to the storage on demand and progressive download of fichiers.flv/.mp3.

  # File stored in this folder can be listened to and are also available PD.

  # Note: If you use the installation default Apache as a Web server.

  # If you change VOD_COMMON_DIR and please change the document root

  # in the httpd.conf file accordingly.

  # For example:

  # VOD_COMMON_DIR = \webroot\vod < FMS_Installation_Dir >

  #

  VOD_COMMON_DIR = / opt/adobe/fms/webroot/vod

  # VOD_DIR is the full path to the sample application "VOD".

  folder # to store only the fichiers.flv/.mp3 on request. Files stored in

  # This file are not PD-able

  # For example:

  # VOD_DIR = \applications\vod\media < FMS_Installation_Dir >

  #

  VOD_DIR = / opt/adobe/fms/applications/vod/media

  # The maximum size of the FLV cache, in megabytes.

  # The default is 500 MB.

  #

  SERVER. FLVCACHE_MAXSIZE = 500

  # To start and stop the server HTTP included throughout

  # with FMS.

  #

  SERVER. HTTPD_ENABLED = true

  ################################################################

  # This section contains configurable settings in Adaptor.xml #.

  ################################################################

  # Application to the virtual host directory

  # For example:

  # VIRTUAL SERVER. APPSDIR = C:\myapps

  #

  VHOST. APPSDIR = / opt/adobe/fms/applications

  VHOST. ALLOW all =

  ####################################################################

  # This section contains configurable settings Application.xml #.

  ####################################################################

  # List of semicolon delimited paths of research for loading script

  # For example:

  # APP. JS_SCRIPTLIBPATH = C:\scripts; C:\Program Files\Foo\scripts

  #

  APP. JS_SCRIPTLIBPATH = / opt/adobe/fms/scriptlib

  ###############################################################

  # This section contains configurable settings in Logger.xml #.

  ###############################################################

  RECORDER. LOGDIR =

  ####################################################################

  # This section contains configurable settings in Users.xml #.

  ####################################################################

  # Enable or disable using HTTP requests to run admin commands.

  # The value "true" to enable, otherwise it will be disabled.  The

  actual orders # allowed for the server admin and admin of the virtual host

  # users can be defined in Users.xml.

  USERS. HTTPCOMMAND_ALLOW = true

  Users.XML:

  < root >

  < UserList >

  <!-this tag defines a server administrator. ->

  < username = ' ${SERVER.» ADMIN_USERNAME} ">"

  <!-salted Hash of the password for the administrator of the virtual server. ->

  < password encrypt = "false" >$ {SERVER. $admin_password} < / password >

  <!-this administration cannot connect to the server of the-> specified

  <!-hosts. This is specified as a comma-delimited list.

  <!-host names or domain names and/or (full or partial) IP->

  <!-addresses. For example,-->

  <!-"foo.yourcompany.com, macromedia.com, 10.60.1.133, 10.60" - >

  <>allow all < / allow >

  <!-this admin is unable to connect to the server from all the...

  <!-specified hosts. This is specified as a list by commas->

  <!-the name of host or domain names and/or IP (full or partial) - >

  <!-addresses. For example,-->

  <!-"foo.yourcompany.com, macromedia.com, 10.60.1.133, 10.60" - >

  < deny > < / nie >

  <!-specifies the order in which evaluate < Allow > and ->

  <!-< Deny > tags. This can be 'Allow, Deny' or 'Deny, Allow '. The - >

  <! - default is 'Deny, Allow', which means that access is allowed - >

  <!-unless specified in < Deny > < Allow > and not.     ->

  < order > allow, deny < / order >

  < / user >

  < user name "janedoe" = >

  < password encrypt = "false" > S4mpl3P4ss < / password >

  allow <>< / allow >

  < deny > < / nie >

  < order > allow, deny < / order >

  < / user >

  < / UserList >

  < AdminServer >

  < HTTPCommands >

  <!-turn on or off using HTTP requests to run admin commands.     ->

  <!-set "true" to enable, otherwise it will be disabled.  The - >

  <! - actual orders allowed for server admin and admin of the virtual host - >

  <!-users can be defined in allow it and deny elements.                                   $

  < activated >$ {USERS. HTTPCOMMAND_ALLOW} < / activate >

  <!-list orders admin server accessible through HTTP.         ->

  <!-add several commands separated by commas.  'All' indicates->

  <!-all orders (it is not recommended to allow orders).          ->

  <!-Separate multiple commands with commas.                              ->

  Ping < Allow > < / allow >

  <!-list of orders admin server refused access via HTTP.                ->

  <!-add several commands separated by commas.  'All' indicates->

  <!-all orders.                                                       ->

  < deny > all < / deny >

  <!-processing order for refuse and allow command lists.  'Deny, allow' - >

  <!--means that the command will be permitted if the order is allow-->

  <!-list or not in the deny list.   'Allow, Deny' means the--> command-line

  <!-will be allowed if it is in the allow list and not in the - >

  <!-list of deny.                                                           ->

  < order > deny, allow < / order >

  < / HTTPCommands >

  < / AdminServer >

  < / root >

  Exit the: admin/1111/ping? auser = Admin & apswd = str34m1ng:

  < result >

  errorof the < level > < / level >

  < code > NetConnection.Connect.Rejected < code >

  < description > Admin user requires valid user name and password. < / description >

  < timestamp > Thursday, May 17, 2012 11:33:43 AM EDT < / timestamp >

  < / result >

  Links do not work for localhost and external connections and the fms_adminConsole.htm (.swf) fails as well.

  Any help is appreciated!

  Hey Jon,

  Please take a look at this. Should help.

  http://forums.Adobe.com/message/4346847#4346847

  Thank you.

• All my Word documents somehow got converted to the format of WordPad and not change back. Why?

  I just noticed that all the documents I have stored on my hard drive got converted to format WordPad somehow.  I have no idea why.  When I open Word and then open the file in Word and click to save it in word, it always records in WordPad format.  I have no idea why this started happening.  When I create a new file with Word and save it, it also converts somehow in WordPad format.  I'm totally stumped.  How can I fix?

  Hello
  Right-click on the .docx file, select Properties,general in G tab, click Edit , select the Microsoft word application, if don't figure does not, please browse the path where you have installed on the local system & select the EXE file.apply
  Then check!

  Hope it will be you.

  Kind regards
  Chauvet J.

• Question about the formula of Member and BegBalance

  I have a requirement where I need to calculate the value of '' suffering '' and need to save it somewhere so that I can use it to display on the dataforms.
  
  The logic of the last value Due must be--
  
  Suffering = year previous year Total + current (Jan: Prior month)
  
  I was planning to write a formula for this member. Can I use substitution variables, as title, etc. PriorMonth in the form of Member to achieve this?
  
  In addition, since we do not use BegBalance Member for purposes like the display on the dataform etc. can I use for this requirement where I can write the formula of the BegBalance member and give it an alias name 'Suffering' I can use to show on the dataforms. Is this possible?
  
  Please let me know. All entries are appreciated.
  ~ Hervé

  Hello
  Perhaps it should look like this:
  & priorYr-> YearTotal+@sum(jan:&currMonth);
  / * No need to specify the current year as it would be fixed in pov, column or page. If necessary, replace the sum with @sumrange(&currYr,jan:&currMonth) * /.

  See you soon,.
  Alp

• I have Photoshop elements worm 12 installed on my desktop.  I am considering the purchase of worm 13 and would like to install on my desktop.  If I uninstall my worm 12 of my Adobe Office will allow me to install it on my laptop?

  I have Photoshop elements worm 12 installed on my desktop.  I am considering the purchase of worm 13 and would like to install on my desktop.  If I uninstall my worm 12 of my Adobe Office will allow me to install it on my laptop?   In fact, it is a legal question and might be the best answer by Adobe, but I can't find a way to communicate directly with Adobe anywhere.

  You are allowed to have any version of the EP on two computers, so you don't even have to remove from the desktop if you do not want.

• How to remove Photos from the iPhone/iPad/iCloud and no pictures

  How to take a photo with my iPhone/iPad, allow it to synchronize with Photos on my Mac via iCoud, then delete from my iPhone/iPad/iCloud and removes any Photos on Mac? I want to save the photo on your computer and save space on small devices?

  I keep seeing articles on the iCloud market turn but it seems the photos all return on the devices once restarted. I want to iCloud on use as a conduit to get the photos to my computer, not as a large storage space. I want the Photos app on my Mac where all the photos are filled and stored and choose those which is left each device.

  Right now they are all in the pictures on the Mac, but I'm worried if I remove it from my iPhone/iPad that they will disappear from Photos on the Mac. I don't understand the new Photos app with all the missing features of iPhoto.

  Thank you!

  You can not that's not how works iCloud photo library - it is not a conduit but a total synchronization service whose entire raison d'etre is to keep libraries connected identical - all changes made on any device (addition, deletion or modification) are made on all devices. For devices with limited memory, using optimized photos

  If this isn't what you want then use another service - USB import, iTunes sync, MyPhotoStream for example each do different things and everyone can move photos from one device to another

  And Photos lack a lot of features iPhoto form - in fact much more features than iPhoto including iCloud library there like a bigger and better editing capability and better external editing capability and so on

  LN

• someone did factory reset on me and I got iMovie and GarageBand, and I had to make a new account that dosent iMovie and GarageBand (I got them with the laptop) is there any way I can get back them? A response would be appreciated

  someone did factory reset on me and I got iMovie and garage band, now I had to make a new account and that dosent just iMovie and GarageBand is there any chance I can get back my account?

  The Apple ID, you saved your Mac with, is the Apple which has all the applications provided with the Mac ID. By creating a new Apple ID, you can buy Apps. I know, I have two Apple ID myself. It is very important to know your Apple that you used for the registration ID, install and download all your apps in the App Store.

  Bravo!