I am running Vista Business SP2 and my machine don't allow / recognizes any device that I attached via the USB port such as card readers digital camera, IPOD, etc.

Similar Questions

• HP Officejet Pro 8500 has 910 a, Vista 32-bit, does not connect via the usb port on my PC!

  I used to have it all in one connected to my pc, until I lived some printing problems, so I decided to uninstall it!  When I tried to reinstall, the pc will not connect it.  I tried different ports and have replaced the cable, have also downloaded the latest software and drivers all to nothing does not.  I can connect wireless to my laptop, but unfortunately is not a solution for my office because it is not wireless, so it must be connected via USB.  At my wit's end, please help me!

  Hello

  Can you try to insert a flash drive into one of the USB ports on the printer, to make sure she reads it?

  The printer port may be what gives you the question. In addition, you can try the USB printer connected to another PC?

  Let me know the results.

• I try to communicate with the third instrument via the usb port but I don't know how to do same in nor-max, I'm not able to see devices usb port symbol and section of the Interface.

  Hello

  I am tring to connect my power supply that is not or via a USB cable, but I am not able to see my connection or the not-max usb symbol.

  first time I use it will you please guide me, and is there a driver I need to download for this? Here, I put one attachment regarding this.

  Thanks in advance.

  
  

• Cannot run Mercury Marine computer diagnosis System (CDS) via the usb port.

  Original title: trying to run mercury marine diagnosctics system cds via usb port, will not initialize port. I have tried 4 different ports, usb drivers for this system are installed. using windows 7 ultimate

  Windows 7 ultimate installed just to run the version of system.have Fig. 9 CD Mercury system with new SPX usb to serial port adapter 9 cable pins. cannot talk to engine-serial port initialization - error

  Hello

  I suggest you speak with the Mercury Marine computer diagnosis System (CDS) press using the link below.

  https://mercurymarinecds.SPX.com/contact.aspx

  Hope this information is useful.

• I have an android Tablet and my usual laptop recognize it when I connect it to the usb port

  my laptop recognizes my usb webcam but not my pc android tab

  Hello

  1. what operating system is installed on the laptop?
  2. do you get any error message when the tab android PC did not get recognized?
   
  
  Method 1: perform the steps from the link below and see if it helps.
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
   
   
  Method 2: Check the tab pc android with another computer and see if it is recognized.
   
   
  Hope this information helps.

• Satellite L50-C-215: failure to install Win7 via the USB port, pb and toshiba.bg bug ' workshop

  Satellite L50-c-215 is a laptop sold without optical drive or OS.

  We bought it today.

  
  Questions:
  -We were told "it is compatible with windows 7", but what a salesman said, everything can be downloaded from the Web from Toshiba site
  -While watching the Web from Toshiba site, a link says 'no system operating inside'. Link is corrupt
  -2 "official" companies are listed for the Bulgarian Web from Toshiba site are wrong: nobody told on the phone that they are not official support from Toshiba

  
  Technical questions:
  -J' tried to put several Windows 7 ISO on a USB key, using the official Microsoft tool and Rufus, but I got error that says "CD/DVD Driver is missing."
  -In some forums, it is said that test the spirit of the thing that a USB 2.0 can solve if USB 3.0 will fail. Each USB failed.
  
  Sales question:
  -Although the European commercial law says people have a little more time to restore a non-working product and be reimbursed, when we returned to the computer at the Technopolis shop a few hours after the purchase, employees told us ' problem is not hardware: we do not cancel the sale, we can take over the computer and give your money. " "Problem is software: see with Toshiba.
  The best we could get was the address of a computer service non-Toshiba to try to ask if they might be able to install Windows 7

  
  I already spent half a day working on it
  What can we do to install Windows 7 or get the computer returned and refunded?

  Tried Tnings at night:

  -> Intall Ubuntu 12.04: card WiFi can't work, no Ethernet cable to update from the Internet

  The drivers are on the website of Intel, but solution install require packages to download on the internet, not USB

  -> Last Debian version: error starting in the command line

  -> 14.04 installed, Ubuntu box checked during installation to use the Intel Wifi device
  Re: software WiFi cannot connect. Spent a few hours on forums to try to understand how to install the Intel USB drivers. Does not work.

  For people who want to buy this model, try to get a player of optical disk to install Windows, a good cable to Linux, update or be prepared to spend time and money for the service simply be able to use the computer.

  Oh, another thing: Technopolis company is not able to provide you with enough information before buying a product. I will not say that they rip off, but almost: especially to overseas buyers, buy refusal refund to anyone who is not able to have an argument that was screaming in Bulgarian with them.

• my system does not know the USB ports and the camera, win 7 x 64, asus k53z

  Thank you

  Hello

  1. are you not able to connect the device via the USB ports?

  2. What is the brand and model of the camera?

  Please provide us with more information on the issue, you face to help you.

  You can visit the link of the article of Microsoft that will guide you on how to ask questions below.

  Suggestions for a question on the help forums
  http://support.Microsoft.com/kb/555375

  You can run the Fixit and check if it helps.

  Hardware devices do not work or are not detected in Windows http://support.Microsoft.com/mats/hardware_device_problems/

• G5x - loading via the USB cord and a powerbank?

  Just bought a G5X. Buy an extra battery because of comments I've read on the battery life.

  Setting everything up, take some photos and read the manual.  He mentions the USB cord in option and the possibility to connect it to the computer directly to load and do not have to use the AC adapter as an option or using the USB option and the optional adapter to plug into the wall.   No mention is made in regard to connect it via the USB port in to a power Bank.  I have a Bank of RAVPOWER which I use to load my Galaxy 6 and my iPad from time to time.  The specifications are:

  capacity, 16770mah / 61.9wh, entry Screemy/2, output dc5v / 4. 5 a total max.

  Search Bank powerbank and power on the forum, but is not come with anything so thought I would ask if we use power load up and if it works well or not.

  Thank you.

  Your camera battery is only a 1250 mah 4 battery 5wh your powerbank should do the job nicely!

  The camera will only build the power he needs to load the regarless of powerbank power capacity,

  I use power also for various devices that are a fraction of the capacity of power

• BlackBerry Smartphones No micro sd, data connection, simply to transfer photos and other BlackBerry to the computer via a usb port

  Very well. So I don't have a data plan on my blackberry, so no not web email, I use it strictly for telephone calls, text messaging and taking pictures. I want to transfer my photos and my text messages sms from my phone on my computer. I would also like to transfer my ringtones if possible but I won't push my luck on this one here. I don't have a microsd card in my phone, so everything is recorded directly on the phone itself. I tried to connect my phone to my computer via the usb port but it does not allow me to go into things phone and copy on my computer. I also downloaded and tried the blackberry desktop manager, but he wants me to turn on the storage of mass media that will not help me because there is no microsd card in my phone. I want to record everything on my computer because I bought a new phone that is NOT a blackberry and I want to have my files on my computer. Can someone help me please?

  Thank you!

  Hello

  Try to download and install an earlier version of the desktop as the BlackBerry Desktop Software 4.6 software.  You should be able to download it here: https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22

  Which works best?  Another option is to get the CD that came with your phone and install the original version (assuming you still have it).

• Failed to open all files with the extension .exe in Vista Business SP2. Dialog box appears and asks which program to use. Seems to have lost the info file assoc after virus removal.

  Failed to open all files with the extension .exe in Vista Business SP2.  Dialog box appears and asks which program to use.  Seems to have lost the info file assoc after virus removal.  Any suggestions?

  Hello

  Try the methods provided below and check if the problem persists.

  Method 1:

  Try the fix it or follow the manual for troubleshooting to solve the problem.

  When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program

  http://support.Microsoft.com/kb/950505

  Note:

  The link above contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  Method 2:

  Download and run Microsoft Safety Scanner and check if the problem is caused by a Virus/Malware.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• I am running vista 32 bit and I think the upgrade to windows 7

  I'm running vista 32 bit and I think the upgrade to windows 7, I don't know if I choose the upgrade option, I can keep all my files and all the software that I

  installed on my laptop but that include photos, video and music and send the parameters I use outlook 2003.

  Thank you

  Hello

  Depends on which edition of Vista you use on Windows 7 edition, you can switch to.

  And as you use 32-bit, you can only switch to Windows 7 32 bit.

  32-bit to 64-bit should be done with a clean install.

  Before purchasing Windows 7, follow these steps:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  And the Microsoft Store where you can get an idea of the price of Windows 7:

  http://www.microsoftstore.com/store/msstore/en_US/list/CategoryID.50726100

  See you soon.

• I am running vista ultimate SP2 32 bit. I'm unable to complete the installation. Support for koadak says that I need to update my windows install. When I go on the site microst, I don't know that one to download. Help!

  I am running vista ultimate SP2 32 bit.  I'm unable to complete the installation. Support for koadak says that I need to update my windows install.  When I go on the site microst, I don't know that one to download. I am running vista ultimate SP2 32 bit.  I'm unable to complete the installation. Support for kodak says that I need to update my windows install.    Help!

  Update your OS via windows update (start > Control Panel > Security > windows update).

• used ACER Aspire 5100 which has windows vista Home premium with service pack 2. It has technology MOBILE AMD Turion 64 x 2 usb ports doesn't work don't, webcam and CD/DVD drive now does not.

  I bought the laptop to a pawn shop and waiting for a few minor problems, but not this one.

  It began with the webcam doesn't work does not correctly, but works. After Device Manager running that it has detected a Xerox Pro scanner, not built in webcam which i see in front of me. I tried everything with no success, but this isn't the only problem there is... more

  After I realized that the cam is not working, all 3 USB ports leaving recognize anything and all the devices connected by a mouse flexible wireless microphone on a memory stick 4 GB, could not be recognized. All were then tested in two other PC with these things being recognized and installed on the PC.

  I have updated after him saying driver not installed, only to be told driver is already up-to-date, but will still not be recognized.

  Now the CD/DVD does not work and is not even detected in scan. says the drivers are not present or that is disconnected. I did nothing else than to go in circles are doing the same thing over and over again.

  Is there a worm or bug or something wrong freeking I know and how do I solve this problem?

  I like most of the features of vista, but if it's the doo doo a bit I have to put up with... I want XP less back pain...

  Once again can not locate or install programs or drivers to operate the integrated webcam

  All USB ports defective 3 and CD/DVD is no longer functional or even detected in laptop... HELP ME PLEASE

  Hi Laurent,.

  1. did uninstall you the USB ports on the Device Manager and reinstalled as mentioned in the previous post?

  Please see the following thread link:

  my USB say this device not yet recognized the worsks device in the other laptop why?

  Uninstall all USB device manager entries and check.

  a. Click Start and typedevmgmt.msc and then click OK. Device Manager opens.

  b. expand Bus USB controllers.

  Note: You will need to scroll down to find this point.

  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.

  d. Repeat steps above for each controller USB is listed under Bus USB controllers.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  f. check the USB device to see if it works

  2. have you tried to uninstall the webcam?

  If this is not the case, try to uninstall the webcam in Device Manager and install the latest version of the drivers from the following Acer site.

  Acer Driver Downloads

  On the problem of DVD player, you can try the steps in the following article and check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Hope this information is useful.

• When I try to start my computer, it does not load anything. The backlog, but the rest of it runs bad and slow. I can't open any programs that either, and my pointer always told it to load.

  Original title: Please HELP

  When I try to start my computer, it does not load anything. The backlog, but the rest of it runs bad and slow. I can't open any programs that either, and my pointer always told it to load. Safe mode works, but I just don't know what to do. Help, please

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Since it works fine in safe mode, I suggest you to try to perform the clean boot to safe mode and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  Method 2:
  Also, try to run the safe mode System File Checker and check if it helps:
  http://support.Microsoft.com/kb/929833

  Method 3:

  Be sure to run a full scan with your antivirus software.

  http://www.Microsoft.com/security/default.aspx

  It will be useful.

• My HP 14 laptop is not recognizing the usb ports and wifi at startup.

  During the last few days I been dealing with the issue that my laptop does not recognize the usb ports and wifi. After several reboots, it works fine. My drivers are up to date, so I don't know why, I'll have this terrible problem.

  Welcome @hildergarn,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I understand that you have a problem with your Wi - Fi and USB ports on your laptop from HP.

  My first suggestion would be to use the wireless network troubleshooting and Internet tool. At the bottom it will ask you questions to help you diagnose the problem.

  Please take a look at this great Charter called troubleshooting wireless network and Internet. This document will help you to solve the problem of Wi - Fi.

  Have you tried to restore the BIOS?

  Have you tried to connect directly to the Modem/Router?

  You have uninstalled the driver in Device Manager?

  Please try to uninstall the driver in Device Manager by using the following steps:

  • Go to the Device Manager.
  • Expand network adapters.
  • Right-click on all NICs individually.
  • Click on uninstall.
  • Restart the laptop twice.

  How many devices you try to connect?

  What you are trying to connect via USB?

  Are - what you happened to try to use the HP Support Assistant?

  Here is a link to the HP Support Assistant, if you not him have not yet tried. Simply download and run the application and it will help with the software and drivers on your system that need updated.

  Here are other troubleshooting steps that may help too. If the USB device does not appear in Device Manager, then it might be a question of power requirement. Unplug the machine and perform the following steps until the device is detected:

  • Reboot the laptop

  • Plug in and wait five seconds.

  • If the device does not appear, try connecting to another USB port.

  • If the USB device is displayed in Device Manager after you connect the cable to a different port, then uninstall and reinstall the software of USB device driver.

  If the device is not recognized in any port, unplug it and go to the next step.

  • Open the Device Manager.

  • Double-click Bus USB controllers,

  • Double-click on a USB root hub,

  • Click the Power tab

  • Click on properties of power supply (if it is displayed).

  Devices need that are connected to the hub are shown, as well as the power they have. If the total displayed power is more than 500 mA, remove the devices and use a hub powered.

  • Continue looking at the properties of the power of each USB hub. If the total power required exceeds the total available power for the hub, then remove a device on this hub to a decrease in the number of consumption.

  • Plug in and wait five seconds. If the device is not recognized, unplug and go to the next step.

  Please note; Remove USB cables at high speed that are more than 3 m (9.8 ft) in length and use cables at high speed that are shorter than 3 m.

  Source: troubleshooting USB connections - please look at this document and follow all the steps in it.

  When we came to a resolution, please share what has worked for you with others by marking this post as an acceptable Solution. If you do not want to show your appreciation for my efforts today, please take a second to click the Thumbs Up button below.

  If please re-post and let me know the detailed results of all the troubleshooting steps in this post. Could you please provide me with your model number (How can I find my model number or product number?) also.

  Can't wait to hear from you!

  Have a great day!