HP Officejet Pro 8500 has 910 a, Vista 32-bit, does not connect via the usb port on my PC!

Similar Questions

• Where can I get a driver for HP Officejet Pro 8500 has 910

  Cannot parse anything

  Thanks but I tried several times, I go through all the steps & I think I have then at the end any communication with the printer. I tried to disable the firewall I have many problem withis hours invested. Past hoours on the phone with HP with a person that I could hardly understand to add to the problem. Time on the phone with McaFee & Linksys everyone. I have a hp Pavilion dv7-6b78us computer laptop that I am trying to connect my printer Hp Officejet Pro 8500 A 910. Large prints don't come to scan wireless & it suppose too. HP has their money but no service. Thanks for your help, maybe next time.

  Best regards from Wayne

  Then why you mark something as the answer when you got no response?

• OfficeJet Officejet Pro 8500 has more eAiO Scan to computer scans only part of the Document

  I am trying to scan my Officejet Officejet Pro 8500 has more eAiO scan to my iMac (Mac OS X 10.6.8).) IT scans only part of the document is scanned. However, when I copy it, the entire document is printed. I was looking for, if I could change this on the officet, or the system of preferences on my mac, but couldn't find anything on the 8500. On mac, I could change something, but it was only the scans on insiders from my computer.

  Scanning directly from the Officejet comes in very handy when the digitization of books, with one hand, I have to push it and the iMac is not in reach of the officejet...

  Otherwise, I am very satisfied with the printer and everything works fine...

  Thanks for any help.

  iMac (Mac OS X 10.6.8)

  Hello

  I hope you feel better now!

  Please specify the exect option that you use to scan from the control panel of the device.

  What exect icon are you clicking after selecting the scam?

  If it is computer, try to update the latest version of the driver and check if the Scan shortcuts Manager do not appear:

  Click the Apple icon, then software updated. Be sure to select any update HP available.

  If you don't see the specific option yet, you will need to delete all HP software installed completely and install the latest version:

  * Please note that the following steps will delete all HP software installed.

  1. click on menu go (click the desktop, then watch the menu in the bar at the top of the page)
  2. Select Applications
  3 select the Hewlett-Packard folder
  4. double-click on uninstall HP application
  5 follow the uninstall to prompt to select a device to uninstall
  6. press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall
  7 approve any prompt to uninstall all HP software.

  Download and install the latest driver below:

  http://FTP.HP.com/pub/softlib/software11/COL34340/MP-85024-2/OJ_AIO_08_8500_A910_Net_Full_Mac_WW_74.dmg

  Finally, update the latest driver by clicking the Apple icon, then software updated.

  If you use another method of scan, please specify which option you use.

  Kind regards

  Shlomi

• Vista 32 bit does not start after the mode 'sleep'

  I have Vista Ultimate 32 bit SP2.  I put the computer in standby mode and the next day morning tapped the keyboard space bar to wake him up.  I have a Logitech G15 game keyboard with an LCD display, it began to rise, then I noticed all the keyboard lights were flickering.  The system never started and the screen remains black.  I took the cover off my PC and noticed that fans have been "forced" for about 1 second then remains off for a period of about 5-7 seconds before the pulse on once again.  This is repeated.  I pressed on the power switch for the computer for 20 seconds, without result.  I disabled the power supply directly for about 20 seconds, he turned back and have the same pulse.  Then I unplugged the power cord to supply POWER, same year, same net effect.  I've checked all my connections, etc., everything is in order.  I got an iPod touch connected to the computer via the USB port before sleep.  But I perfrmed this function several times one never had a problem.  I of course got the thing first USB when I started my problem.  I guess it's one thing to the BONE, but what's my line?  Thanks much for any help!

  A little late on the answer, but he had nothing to do with food. I was able to solve the problem by turning off the computer, unplug and burst the battery from the motherboard, let it rest a bit, then put it back together and bam, I'm back in business. I think it's a problem between the motherboard BIOS and Hibernate commands put off by * Vista and the only way to stop the loop is the above afformentioned. Everyone always wants to blame the food for these issues... Now PS can cause really strange but common problems...

• My desktop under Vista Home Premium does not connect to the internet.

  I have an Acer Aspire X 1200 desktop equipped with a NVIDIA NForce network controller. About 1 week ago I was browsing the internet, Norton anti-virus popped up and told me to renew my subscription. Now, I've never had Norton on my computer and when you click Remind Me later, my internet crashed. Now the whenever I plug my ethernet cable in the box, it connects to my router Motorola 5BS101 surfboard, but it does not connect to the Internet. I am running Windows Vista Home Premium. I tried to run malware programs remover, thinking it was a malware, nothing done. I tried to run to remove virus and nothing. I tried to change the IP address to my my laptop was broadcasting, because the internet runs on it, but no results. When using the command prompt to find out what the problem is, it says the active IP routing: routing WINS unactivated: No. looking at the stats of network adapters, it says active DHCP: No. address IPv6 local link: fe80::15f9:58e2:c2d8:66e7 10%
  Autoconfiguration IPv4: 169.254.102.231. Also using ipconfig / renew, said the message DHCP is not enabled.

  Are you sure you never had a Norton trial subscription on your computer?

  Norton will do strange things.

  http://www.Symantec.com/Norton/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN

  Try to use the Norton removal tool.

  The computer you are using now if you have an Internet connection with the other > download / save > copy to Flash Drive > transfer / install it and launch it on the other computer.

  See you soon.

  Mick Murphy - Microsoft partner

• The network file scanned Documents (PDF or JPG) = 0 (OfficeJet Pro 8500 has 910 bytes

  I have OfficeJet Pro 8500 910 has connected to the wired network with domain

  I created a shared network folder with read access to my computer (operating system windows 8 Pro X 64) through IP address of printer

  http://10.181.XX.xxx

  The shared folder has appeared on the screen officeJet and test with success, when I wear analysis on the officejet, the digitized file appeared on the network folder but with of size 0 bytes and does not open even it is pdf or jpg

  I have same door on the other computer is windows 7 PRo X 64 spouse for the same field and scanned documents open succefuly.

  Help, please

  My problem was solved by updating the HP 8500 has the latest firmware

  Thanks for trying to help me

• HP Officejet Pro 8500 A909a_ Scan with HP Solution Center does not work

  Hallo.

  My name is Michele.

  I can't use the solution Center HP to scan with my HP Officejet Pro 8500 A909a (I have windows 7 O.S.) because when I click on "Scan document", a white error window appears and says "necessary component is unfounded or not properly installed.". Install new software HP Photosmart". I uninstalled and again installed the software, but it does not work. Previously, he worked with XP. Recently, I updated XP with Windows 7 and I found the solution Center HP does not work. Maybe, it does not match with Win 7?

  Thank you to everyone who wants to help me

  Hi people,

  I appreciate the time you took to try to solve this problem. I was able to do more research and found a useful solution, please click on the link below to get started:

  The HP imaging device is not found... - popup error

  Please try the recommendation and let me know the results.

  Thank you

• Vista 32 bit does not connect to internet via wifi on new router. All other computers work.

  I upgraded my router Belkin G to a Netgear N150.  My computer laptop windows 7, ipad and ps3 to connect to the internet.  My Vista laptop will connect via cable but not wireless.  The wireless still works on the old router.  The new router DHCP assigns an ip address from my laptop to visa, but it's a unidentified network which is local only.

  I tried to reset the tcp/ip and winsock stack.
  I disabled wireless utility from Toshiba configFree.
  I ran:
  ARP d
  ping 192.168.1.1
  Ping 192.168.1.1 with 32 bytes of data:
  Response of 192.168.1.15: Destination unreachable host.
  Response of 192.168.1.15: Destination unreachable host.
  Request timed out.
  Response of 192.168.1.15: Destination unreachable host.
  Ping statistics for 192.168.1.1:
  Packets: Sent = 4, received = 3, Lost = 1 (25% loss),
  ARP - a - v:
  Interface: 192.168.1.15 - 0xb
  Internet address physical address type
  192.168.1.1 00-00-00-00-00-00 Invalid
  ipconfig/all /allcompartments

  Windows IP configuration

  ==============================================================================

  Information network for the compartment 1 (ACTIVE)

  ==============================================================================

  Name of the host...: jennifer-PC

  Primary Dns suffix...:

  Node... type: mixed

  Active... IP routing: No.

  Active... proxy WINS: No.

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :

  ... Description: Atheros AR5007EG Wireless Network adapt

  Physical address.... : 00-24-D2-8B-4F-ED

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: fe80::6476:106d:3c70:4bf3% 11 (Preferred)

  IPv4 address: 192.168.1.15 (Preferred)

  ... Subnet mask: 255.255.255.0.

  Lease obtained...: Thursday, February 16, 2012 20:11:05

  End of the lease...: Friday 17 February 2012 20:11:04

  ... Default gateway. : 192.168.1.1.

  DHCP server...: 192.168.1.1.

  DHCPv6 IOOKING...: 285222098

  DHCPv6 DUID customer...: 00-01-00-01-13-87-1B-E5-00-1E-33-80-70-41

  DNS servers...: 192.168.1.1.

  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  Description...: Realtek RTL8102E Family PCI - E Fast Ethern

  and NIC (NDIS 6.0)

  Physical address.... : 00-1E-33-80-70-41

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 7:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Teredo Tunneling Pseudo-Interface

  Physical address.... : 02-00-54-55-4E-01

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 11:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  Description...
  . : isatap. {0E605CFB-74AF - 441-A-8404-DC7C2175F
  9 9}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Card tunnel Local Area Connection * 17:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {0E605CFB-74AF - 441-A-8404-DC7C2175F
  9 9}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...
  . : Yes
  Card tunnel Local Area Connection * 18:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {BCF6118F-5DAA-4C0C-BEBD-710E18983
  E72}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Card tunnel Local Area Connection * 19:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {0E605CFB-74AF - 441-A-8404-DC7C2175F
  9 9}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Card tunnel Local Area Connection * 21:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {0E605CFB-74AF - 441-A-8404-DC7C2175F
  9 9}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  I can't think of anything to try.  I really want to go back to my other router.  Any help would be appreciated.

  Solved.  Was a driver problem with Atheros adapter Vista security and network.  Downloaded new driver and Voila.

• HP officejet pro 8500 has 910 with windows vista to abnormal termination that don't resolve

  My printer was given to me and will loop continuously: it starts and displays the progress bar, operates the head printer port.

  poster 'abnormal termination' and stops and resumes the same loop again and again. I tried both the soft reset and hard reset with no results or editing, he keeps just loop. I checked for paper jams, removed covers and clean the printer replaced the cartridges of ink and cleaned printer heads, made a complete Visual inspection, nothing helps. (I'm a computer technician).

  I am at a loss here and any help would be greatly appreciated!

  Thank you!

  Well, I received my new adapter (the correct one) and it solved the problem! Only now I have a jam to carriage of mystery that I will work on next.

  I'm going to mark it as RESOLVED, because it fixed the issue I was addressing. Yep! Make sure you have the right adapter.

• HP Officejet Pro 8500 A909a: Help on printer display message says: no connection to the computer

  Help on the printer screen says: no connection to the computer, but is connected via a USB cable. Also prints OK, but the HP solutions Center says: ink levels not currently available; iable.

  Well this thread of @greenturtle should help you with Troubleshooting.

  Please let me know if the Solution Center works after doing the above.

• I have a printer HP (part of the package with the computer) which will connect via the USB port is no longer in my office. He has worked previously so, any ideas on how I can get it to work again?

  While I do not know there have been changes to the system (updates and so on), I don't know what modifications have been made or that one; If any, may be the cause of the problem. Compound that with, I can't get back far enough to get to the last time that I used this printer with this computer and it is a puzzle all around.

  Let me know what additional information as appropriate, you need, maybe the way to collect (if it is not something that I already know how to do) and we'll see if we can get these papers start college again.
  System: HP p6604y Windows 7 Home Premium 64-bit
  Processor: AMD Athlon II X 2 220 processor 2.80 GHz
  6,00 GB (5.75 GB usable) memory
  The printer is HP Deskjet 3000 J310.

  Hi Michael,

  1. What is the error you get all trying to connect to the printer?

  2. the printer works properly when connected to another computer?

  3 is. the computer able to recognize any other usb device?

  Follow these methods.

  Method 1.

  This tutorial is designed to help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

  Solve printer problems: http://windows.microsoft.com/en-us/windows/printer-problems-in-windows-help#fix-printer-problems=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Method 2.

  Why can I not print? : http://windows.microsoft.com/en-us/windows7/why-cant-i-print

  Additional information.

  Find and install printer drivers in Windows 7: http://windows.microsoft.com/en-us/windows7/find-and-install-printer-drivers

  Install a printer: http://windows.microsoft.com/en-us/windows7/install-a-printer

  Let us know if you need assistance with any Windows problem. We will be happy to help you.

• Configure and analyze the Officejet Pro 8500 a - 910 problems has

  HP Officejet Pro 8500 has - 910, Win 7 Home Premium (64). Two problems, maybe!

  1. no response when I click on "scan a Document or Photo - open the scan dialog box.

  2. impossible to set up 'Scan to network folder Wizard' get error "...". cannot write to the destination folder. "Set read-only permissions or wrong."

  Downloaded the latest version of the software, twice, but still failed to get a scan on my computer file.

  Copy on the printer works fine.

  Right click on the folder specified to send the scan to and under the modification of the properties to read only to shared. Also, your operating system must be password protected, so if you do not have a password, create one. You have a particular anti virus or 3rd party firewall? Under manage scanning settings in the HP software scans enabled?

• Gibberish print on HP OfficeJet Pro 8500 has more in a single 910

  Files Adobe PDF prints gibberish, sometimes on my HP Officejet Pro 8500 has most everything one - sometimes in a part of the page it's gibberish, sometimes all this, sometimes none of that.

  Good news. A specialist technology mine fixed simply by running a repair on my installed Adobe program.  Don't know how she is, but she said it has an option to run a repair and it did.  I had many phone HP technicians and business software tech trying to solve this problem over the last 3 years.  YAA!  And technicians called Yaa (migrant from Africa).

• Windows Server 2008 OS is not acceptable for Officejet Pro 8500 has more

  I am installing an Officejet Pro 8500 has more on a network that contains just a Windows Server 2008 R2 (64-bit) computer and a bunch of zero clients.  I read the document "installation of the software of the printer on Windows Server 2003 or 2008" including the updated title hope in my heart.  Unfortunately when I followed the instructions to install from a. MSI file, I get an error message saying "this computer's operating system is not supported", as can be seen in

  https://www.dropbox.com/s/oi3ur31frg8dhi3/HP%20error%20via%20MSI.PNG

  I am able to print to this device I have widower of drivers from Microsoft Update, but I want to be able to scan with it.

  I solved this problem by installing the complete package on a Vista laptop then set up a network folder on the server for the scanned images.  I then unplugged the laptop from the LAN and now I can scan using the front panel of the printer/scanner and images appear on the shared folder of Server 2008.

• Can I print posters 2 x 2 or 4 x 4 with Officejet Pro 8500 has? Windows 7.

  Can I print posters 2 x 2 or 4 x 4 with Officejet Pro 8500 has? I am running Windows 7.

  Hello

  The 8500 (A910) driver is not support printing posters.

  To work around the problem, you can use another pilot who provide the required functionality:

  1. Enter the control panel > devices and printers, click Add Printer .
  2. Click on Add a local printer.
  3. In use the existing Port, select the port for your printer:
     DOT4 if your printer is connected by USB
     If standard TCP/IP network connection used.
     And then click Next.
  4. Click Windows Update in the list of printers, allow several minutes for what the list will apear again.
  5. Select HP in the column of manufacturing
  6. Select the printers HP Deskjet 6980 series column.
  7. All the steps in the wizard.

  Now, you will be able to use the print feature post using the driver 6980, by setting the option Pages per sheet and poster in the finishing tab.