I am trying to import a digital camera in my browser IE 8 on XP Media Center edition.

Similar Questions

• I have Windows XP Media Center Edition Version 2002 with Service Pack 3 and I tried to run Media Center but I get an error message with ehshell.exe.

  original title: error with ehshell.exe

  I have Windows XP Media Center Edition Version 2002 with Service Pack 3 and I tried to run Media Center but I get an error message with ehshell.exe. Could you help me?

  This problem exists since the 1st Media Center. SP2 and SP3 had a difficulty, but it is obvious that it doesn't always. The same problem still exists in Vista today with a lot of other carried over from XP. System restore would work, but you do not have any good restore points so reinstall an operating system seems to be your only option.

  You probably don't want to do an OS reinstall you need for Media Center, but since it does not at all, you might want to play then remove the Media Center updates and or SP3 and reinstall them.

• Windows XP Media Center Edition 2005 Update Rollup 2 X 86 Edition (KB2502898) cannot install it keeps trying to update and re - install every time that I reboot

  The following two updates were NOT able to install, I tried FIX and other methods.  I turned off the PC, install, but every time I start up again, he re - install the bottom to update files and does not install? I tried this at least 10 times without success. But I get the yellow shield at each time of installation.

  Windows XP Media Center Edition 2005 Update Rollup 2 X 86 Edition (KB2502898)

   

    

  Update security for Windows XP (KB2481109)

  See the section "How to get help", for example, http://support.microsoft.com/kb/2502898

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Buying to meet problems installing Microsoft security updates also can visit the following page for assistance: https://consumersecuritysupport.microsoft.com/

• I have 2 OS on my laptop (Media Center Edition that came w / it. and professional because of the needs of the job I did the professional more so how can I remove the professional and keep the House?)

  I have more so how do I remove the professional edition

  Hello

  I suggest that you try the steps in the link below to fix the problem.

  How to remove a second installation of a Windows operating system on a partition
  http://support.Microsoft.com/kb/888023

• Hard install Vista Ultimate 6000, without priming, Acer note able 3100, cams with Media Center edition, 512, dvdrw, drivers, duplicates, blue screen, good config to privileges, I press down over details

  I was reading in this forum, an error is 0x800705b4 in Windows Defender disabled by operating with Security Essentials, it's that I use, is there any Virgin resource to stay with the (OEM) version, I bought this box without knowing, but defender in another installation works well, like SpyBot, they are functionally, easy and do not stop everytimes.
  for Vista, run, I agreeded plus 512, accompanied the classification 3.0 and running the Advisor, all ok, only updated drivers, which I did, visiting Acer Support for improves for Vista, good stay, now with ATI and ENE downloads, did not appear questions in Adm tools, I probed some wrong messages until today, 'HD has STOPPED "No. BOOT HAVE" DO NOT HAVE PERMITIONS' and other bad/uggly which replace answers to think if my OEM version is not good or not have all rights to fight in Net with spam, virus, threats, some pigs.
  I ran a few backups with DVD - RW 4, 7Gigas, but now stay accident, do not stop format in all cases, computer way or Windows BackUp, will be a bad sector in the dvd media, perhaps, I will probe the purchase of one more, it's RW, but in the apps that I have downstairs, one pass me "support dvd are not rewritable, possible! These days are for sale due to lack of economic market, clouds see consumer! Friend, it's time luch here, brasil, thanks much Bacharel em Ciencias Contabeis

  Hola Carlos!

  It seems that you have some problems. We may be able to get you run back soon.

  I think our best option is to do a system restore to a point in time before you start to get in trouble. I hope that you have a few options here.

  Click on START and type > system restore
  Click on next to the first screen. You should see a list of the dates of "restore". Choose one before you start to get into trouble and click Next. Follow the prompts to complete.

  As you acknowledged, you need more memory/RAM. 512 MB is not enough for Vista Ultimate to work well. You need at least 1024 MB... more if possible. You might consider getting RAM before anything else because it will considerably speed up your computer.

  Please let us know what happens.

  Mark <> Microsoft Partner

• Error: The video device is currently in use... trying to import video

  original title: importing video

  I'm trying to import video from my camcorder. I did this several times in the past with no problems. Now, I get the following message: the video device is currently in use. Close any other program that is using the device and try again.

  I don't have any other programs open. I went to the Device Manager; Imaging devices; and my camcorder is listed and it says that the device is functioning properly. I tried to "import from digital video camera" using Windows Movie Maker and I still get the same message. I tried to disconnect the 1394 cable and turn on/off several times my camera. I still get the same message. I've never had this problem before. I have Windows Vista Home Premium.

  I had the same problem since I started recording on 10 July
  I have DELL Studio 64-bit pc
  Sony DCR TRV350 so I use I394 cable 4 pin-to-6-pin firewire
  While your DVR camera is connected to the PC via firewire, search Windows Update and install the patches to recommend.
  If you have Windows encode uninstall it
  reset
  It worked for me
  It may be useful
  I checked with sony for help. They could not help, but it gave me a clue
  http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C111893

• Installation of the software digital camera problem

  I'm trying to install Canon Digital Camera Utilities - ZoomBrowser EX 6.6, CameraWindow DC 8.3 and PhotoStitch 3.1 on my laptop (Windows 7 OS).  I get a message telling me that the application only supports a screen resolution less than 1024 X 768.  My screen resolution is 1600 x 900.  I have even change the resolution of the screen to 1024 X 768 and still get the same message.  In addition, the software installed fine on my desktop, which has a Windows XP operating system.  Can anyone help?

  Hello

  Aren't you?

  http://answers.Microsoft.com/en-us/Office/Forum/office_2010-OneNote/ZoomBrowser-wont-open/ea96b706-dcd6-42AA-8080-f34bf883aa97?msgId=76bcc54b-e87d-46BA-9506-659e1f002b7a

  So you're forced to talk to Canon suggested such Support in the other fhread.

  Use only one profile.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Digital camera HP Photosmart R960 &amp; Windows 7

  I upgraded my OS from XP to Windows 7

  My HP Photosmart R960 camera digital 10mp

  The camera works still strong including individual photo and video.

  The camera allows me to take panoramic pictures by taking a sequence of 2 to 5 images that can be stitched together to capture a scene too wide to fit in a single image.

  Since the evolution of XP to Windows 7, I can't locate the HP Application / drivers needed to assemble the photos...

  Formerly HP Photosmart Essential 3.5 download all photos automatically and automatically detect if there are panoramic pictures and automatically assemble them into a single image.

  Can someone help me?

  Thank you all for all your comments.

  The simplest solution for me was to use my old Office Gateway with Microsoft Windows XP Media Center Edition 2005.  I know that XP is no longer supported by Microsoft, but it still works a-okay.   Security software Norton is always updating XP.

  Photosmart Essentials still detects and automatically download my photos and detected panoramas are sewn automatically.  If i ' ts useful to keep an old computer to do things like this.  It is so easy to transfer the results on my Dell XPS laptop and backup drives.

  The camera man

• Windows Media Center will not recognize TV tuner Digital stations live

  I am trying to display and record all my content from TV on my laptop using my hybrid analog/digital TV tuner card. So far, the WMC recognizes the analog content. But my cable provider provides many channels of ClearQAM I can see on my TV without a decoder, just using the QAM tuner in the TV. My tuner card is supposed to recognize the QAM signals, so I should be able to view all unencrypted content (users) that comes through the coaxial feeder on my portable tuner. But no luck so far. When I set up the TV signal in WMC, the menu only listed setup analog cable my cable box, even though I know that my cable company provides digital content.
  I had actually upgraded my Windows Media Center to include the TV pack (downloaded from Engadget) but even this last version does not recognize digital channels. If I try to change the Program Guide and add them manually, all I get is static when I select the. I am at a loss to know what to do next. Is this a problem that should fix a new TV tuner? I heard good things about the AverMedia card, maybe I should just go that route? Can anyone recommend a new tuner card?

  Hey,.

  See this link:

  http://mymce.WordPress.com/2008/11/01/Vista-Certified-logo-TV-tuner-cards-vs-Vista-MCE-ready-TV-tuner-cards/

  This has all of the compatible TV tuner cards.

  See you soon.

• I'm trying to connect my xbox live to my files. How to make Windows Media Center?

  I am trying to connect my files from my account to xbox live.  I was trying to figure out how, and he said that I needed Windows Media Center.  It doesn't even look like my Windows XP offers.  I can't find anyway.  Can I add my system?  Is that going to even to allow me to access my files?  Any help would be appreciated.
  LG

  Hope this helps ;) I know that it is a complicated process and I understand the House will network computers running the Media Center. If you click on the following link, you should be able to determine if you have any problems of compatibility http://support.xbox.com/en-us/pages/xbox-360/troubleshoot/media-center-faq.aspx

  I strongly recommend to contact Xbox customer service because they have a specialized department set up just to manage customers to help with the implementation and use of the Media Center/Media Extender services available.

  However, here is an overview of some of the basics to have this work:

  Some with Media Center PC/Windows versions are:

  • Windows 7 Home Premium or full, professional edition
  • Windows Vista Ultimate or Home Premium
  • Windows XP Media Center Edition 2005

  Once the media center is installed on the pc, you must configure the xbox as a Media Extender and authorizes.

  Finally, you need to add a network share connection between your console and your pc. This process can be a little intimidating, once again, I recommend that you contact customer service with the help of an expert in the Media Center .

  1-800-4MY-XBOX (1-800-469-9269)

  Good luck!

• Get the message: this program has been deleted while trying to open Windows Media Center

  Original title: I used to have Windows Media Center... But no more?

  I'm trying to connect with my XBOX 360, and it said to open Windows Media Center.  I clicked on start, then went to where Windows Media Center has been. I clicked on that and it says "this program has been removed."  Huh!  Is there anyway that I can download the program, or something?  Or is it IN the Windows during the programming?  Info/comments will be greatly appreciated.  Thank you!

  Brock

  You could try to control Windows Media Center via Control Panel / programs and features / Turn Windows Features on or off / multimedia / Windows Media Center, make sure that it is checked.

  System Restore will not uninstall or reinstall your entire operating system, take your machine over time until the selected restore point (you choose) and load Windows from this date and time.  Programs and updates that have been installed since that date and time are no longer available and need to be reinstalled.  System Restore will also leave you a "Undo" restore point which allows you to return to the present before the start of any restoration.  It also gives you an option to check what effect the return to a previous era will have on your program installed, etc..  It does not affect your personal data, applies only the settings, system files, programs, drivers, and updates.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

• How to import only SOME images from my digital camera to the windows live photo gallery.

  Whenever I try to import new photos on my digital camera with a player... he tries to import the other 112 photos already imported.

  Hello

  You can not in Windows Photo Gallery. Some camera manufacturer provide utilities for importing images that can
  have more features. There are also a few 3rd party utlities that can help - use Bing or Google.

  ---------------------------------------------------------------------------------

  How can I get pictures from my camera to my computer? (Vista)
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-get-pictures-from-my-camera-to-my-computer

  "Why I can't choose the pictures to import? ."

  Because Windows detects your newest pictures and doesn't matter the duplicate versions of the old photos that you've already copied to your computer, it is now easy to import your photos into the folder of photos in a single step. In addition, we recommend that you consult your pictures in Photo Gallery, where large previews make it easy to decide which newly imported imported pictures to delete from your computer. »

  How can I get pictures from my camera to my computer? (Windows 7)
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-get-pictures-from-my-camera-to-my-computer

  "Why I can't choose which photos or videos to import? ."

  Windows detects your images and your most recent videos and is not a duplicate of the old photos or video versions that you have already copied to your computer, so you can import your pictures and videos in a single step. You can then view and organize your photos in the photo library. For more information on the management and organization of photos in the photo library, see Managing your photos. You can also view your images imported into the Windows Photo Viewer, where the large preview format makes it easier to decide which newly imported pictures to delete from your computer. For more information on the display of your pictures in Windows Photo Viewer, see view and use your pictures in Windows Photo Viewer. »

  Working with digital images (Vista)
  http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-digital-pictures

  Working with digital images (Windows 7)
  http://Windows.Microsoft.com/en-us/Windows7/working-with-digital-pictures

  Change the settings for importing pictures and videos
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-importing-pictures-and-videos

  Windows Photo Gallery: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Photo-Gallery-frequently-asked-questions

  ======================================

  Windows Live Essentials: Photo Gallery
  http://explore.live.com/Windows-Live-Essentials-Photo-Gallery-get-started?T1=T1

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Recently impossible to import Photos from the digital camera or iPhone device

  In the past, whenever I have one of my digital cameras or an iPhone connected to my PC (Dell Inspiron 530 running on Windows Vista), the import box would jump to the top, I'd choose to import photos and everything worked without problem.  Not sure if this has anything to do with it, but recently I uninstalled Norton Internet Security 2007 and installed Norton 360 and since then I'm unable to download pictures from my digital camera (Canon Powershot SD950 IS) or my iPhone.  The box "import photos" don't jump (it always did before), and when I go to the Picasa or Windows Photo Gallery and try to "import from camera", it tells me there is no connected device (this happens when the iPhone or the Canon camera is plugged).  And instead of the pealing sound, my PC would usually do when a device is correctly spiked, he made three low knock-type noises, as if to say the device was not properly read.  Interestingly, the iPhone still synchronizes / charges, etc., but I can't get on the photos.  I spent some time chatting with Norton Customer Support, because this issue has started only after that I installed Norton 360, but we have uninstalled Norton 360 (re - installed since) and the problem continued.  I tried several ports, and because this problem has affected at the same time my iphone and a digital camera, that work with any other son and USB ports, I'm pretty sure that this is not something simple like a bad port or wire.  I don't know if it's a matter of updating Windows Vista or what.  So now I'm scratching my head...

  Hi BklnMick,

  Thanks for posting your question on the Forums of Windows Vista.

  I need more information to help you better.

  1. do you think any drive new withdrawal created on the desktop once you connect your digital camera or Iphone?

  2 have you tried to reinstall/update drivers for the digital camera or Iphone?

  3. you see a new message of material found during the connection digital camera or Iphone?

  4. are there any other devices (such as mouse, keyboard, printer etc.) connected to the machine?

  If you are sure that the problem started after installing an application, you can try to perform a system restore on the computer to a previous date when you when it is able to import photos from your digital camera or your Iphone. You can follow the article give:

  http://support.Microsoft.com/default.aspx/KB/936212

  You can also try to power on the machine cycle to drain static electricity that may have built up on the USB ports.

  1. turn of the computer.

  2. disconnect all devices from the CPU.

  3. hold the power button for every 30secs.

  4. connect all devices to the machine.

  5 restart the computer and check if the USB begin to operate.

  Hope the above information helps. Please post back and we do know.

  Thank you & best regards

  Ashish Gupta
  Microsoft Answers Support Engineer

• However, questions to import videos from digital camera to Windows Vista can import images

  Original title: I can't import videos from my digital camera to my computer (Windows Vista), but it will import the photos.

  is there a download I can use to make the computer to import the videos?

  Hi MartCow45,

  1. what program do you use?

  2. what exactly happens when try to import videos?

  3. do you receive error messages or error codes?

  4. what type of files you are trying to import?

  You can visit the following links and check if it helps:

  Can what types of connections and digital video cameras be used to import video?

  http://Windows.Microsoft.com/en-us/Windows-Vista/which-types-of-digital-video-cameras-and-connections-can-I-use-to-import-video

  Troubleshoot importing video problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-importing-video-problems

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot import pictures from the digital camera Canon T3 in Photos

  Hello

  I connect my Canon EOS Rebel T3 and try to import photos into the Photo.  It recognizes my camera and the number of images to import.  But I got these error messages:

  The operation could not be performed. Com.apple.ImageCaptureCore error. The following files could not be imported (they may be an unrecognized file type or the file does not contain a valid data.

  MAC OS X El Capitan 10.11.3

  Photos:

  Version 1.3 (350.23.0)

  Digital camera RAW 6.18 (828)

  Digital Camera Support RAW 6180 (204)

  Should I change a setting in my camera?

  It used to work well in iPhotos.  What can I try?

  Best,

  Louise Ratliff

  Los Angeles.

  See if you can download the files to a folder on the desktop with the Finder or the transfer of images and try importing from there in the library.  If that works reformat the memory card in the camera, take a few test shots and try to re-import from there.