I am trying to install a printer, and it will not print

Similar Questions

• my laptop won't go to the starting window to type my password so I am trying to install windows 7 and it will not be installed.

  my computer windows vista laptop will not go to the start menu to type my password

  You are doing a Windows 7 upgrade starting in a race and activation of Vista operating system.

  Try to repair Vista:

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Case of failure of the foregoing:

  Reinstall Vista > and then upgrade to Windows 7.

  http://social.answers.Microsoft.com/forums/en-us/w7install/threads

  "Download Windows 7 installed and activated on your PC."

  See you soon. Mick Murphy - Microsoft partner

• I can't install the new application on my iphone 5s revel.  I tried to install the update, and that did not work.  I deleted my app and rebooted my phone and tried a clean install and that no longer works... Help!

  I can't install the new application on my iphone 5s revel.  I tried to install the update, and that did not work.  I deleted my app and rebooted my phone and tried a clean install and that no longer works... Help!

  Please see the post below updates on the issue of the revel facilities:

  Problem installing Adobe Revel 2.3.2

• Windows Installer keeps trying to install msi.status but it will not install

  Windows Installer keeps trying to install msi.status but it will not install and I think he got the other updates to the installation.  How difficult or get rid of it?

  Hello
  In my view, that it is a software HP printer problem. Please, try the following:

  If you have the HP software on your PC support (printers, etc.)
  the disc when the pop-up window displays a location '1'. Click Browse
  then open the HP disc in the CD drive. A named icon status should
  appear. Click on this icon and load. This will get rid of the
  Status.msi loop.

  If you do not have the original disc. Uninstall HP Photosmart all-in-One Driver software and HP update program - then only reinstall the HP Photosmart all-in-One Driver software. Do not update, just live with it. The web link for the full features of the software download is provided below.

  http://h10025.www1.HP.com/ewfrf/wc/s...duct=320478 5

  I hope this helps Mark <> Microsoft Partner

• I tried to install GamingSDK1.4 and it does not open. then I went to control panel under windows uninstall 8 and its still on Creative cloud and I can't reinstall it

  Yesterday I installed GamingSDK1.4 and it does not open after completion. I've walked by an officer of Adobe to uninstall, I did. Returned and he was always there, but instead of saying open next to him, he says "up to date" I can't uninstall it. I want to reinstall it to use.

  http://helpx.Adobe.com/creative-cloud/KB/AAM-lists-removed-apps-date.html

• When I share HP LaserJet 4200 printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file missing

  Original title: Reader for printer HP LaserJet 4200 for Windows 7 gives problem

  My hp laserjet 4200n printer is connected to a print server of XP through the parallel port, when I share this printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file I already Miss down site fromhp driver loaded but invain.

  Please suggest

  Hi Mohammed Arif a. R,.

  You can try to plug the printer again and check the updates of Windows and see if the drivers are install.

  Install Windows updates in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  You can also view the following HP Web site and try redownloading drivers and check.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=84033&prodTypeId=18972&prodSeriesId=84028&swLang=8&TaskID=135&swEnvOID=4063

  Also check out the following link and try the suggested steps.

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Note: This article also applies to Windows 7.

  Hope this information is useful.

• I am trying to install a printer wifi (Kodak ESP 7250) and they are both connected to the same wifi but when I try to add the printer, my PC can't find it.

  I am trying to install a printer wifi (Kodak ESP 7250) and they are both connected to the same wifi but when I try to add the printer, my PC can't find it. I made sure they are both connected to my home network and when I go to control panel / printer and try to add a network printer / wireless. He won't find it. Any ideas?

  Hello

  I suggest you to visit these links and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  It will be useful.

• Trying to install my printer Kodak after new XP installed. Error message {procedure entry point could not be found in the library of links Dynamics cscomp dll}

  I had a Trojan horse and had to do a reinstall of windows XP Pro is now trying to install my printer but I get the error message saying "entry point procedure GetMessage DLL is not found in the cscom dynamiclink library dll. Help, please!

  Hello

  I suggest you to refer to this link and check if it helps:

  http://support.Microsoft.com/kb/308028

  It will be useful.

• Error: "error 1920 Print Spooler Service (spooler) could start" when trying to install the printer

  Original title: print spooler could not be started

  Trying to install a printer. Get "error 1920 Service print spooler (spooler) could start. Can you please help?

  Hi phil195golf,

  1. What is the brand and model of printer?

  Try these steps and check if the problem persists.
  Step 1: Run Microsoft Fix to diagnose the problem
  a. see you can not add a printer and you receive spooler printer in Windows XP error messages
  b. click Microsoft hotfix and run the tool successfully.
  c. restart the computer.
  d. install the printer and check if the problem persists.

  Step 2: If the problem persists, install the printer by turning off all non-Microsoft programs
  see How to configure Windows XP to start in a "clean boot" State .
  b. follow steps 1 and 2.
  c. installing the printer and check the result.

  Note: Article, remember to follow 'steps to configure Windows to use a Normal startup state. "

  Visit our Microsoft answers feedback Forum and let us know what you think.

• After trying to install word printer epsom has not stopped workung - uninstalled but stll not working not

  After trying to install a printer, Epsom SX130, on Windows 7, WORD has stopped working - have tried uninstall & restore but still cannot use WORD. After paying only £ 65.00 to restore the office, I'm very unhappy. It is the only document that we need to print, others may be sent by e-mail, but now I can't even open Word documents to use as attachments to an email. I'm totally desperate, do we buy a 'small' I wonder. More than 60 years, when I started it, maybe I was just too old or it's Windows 7 just make my / our life uncomfortable for us to update: Please keep in mind, I'm very, very, ridiculous with computers. We have done with a drive by the way if that makes a difference & downloaded an update. If the answer is "not compatible" that's fine, I can make documents on the old computer, BUT need words for emails: i.e. repeat orders etc. which are vital to our system of new physicians.

  Am totally fed up now...

  Hello

  1. what version of Microsoft Office are you using?

  2. you receive an error message when you start Microsoft Office Word?

  You can perform the system restore the computer to the date when the changes were made not (before the date where Microsoft Office was working fine).

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

   

  NOTE: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  For further assistance on the question, you can post your query in Microsoft Office community:

  Microsoft Office community

  http://answers.Microsoft.com/en-us/Office/Forum/Office_2007

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Runtime error trying to install the printer on laptop software

  I have a laptop HP with Windows 7 Home Premium SP1, my printer is a HP photosmart c5580 AIO. It prints well but without software of the printer on the laptop I can not scan to the computer and use all the features of the printer.

  That being said, I am now trying to install the printing software Online and cd and I get Microsoft C++ runtime error and it will not install software.

  Ive tired all convenience stores of HP, etc, etc...

  Help, please

  Sunny

  Hi sunny1881,

  Welcome to the HP forums!

  I see you have a Photosmart C5580 which becomes a Microsoft C++ runtime error when you try to install the software. I'm sorry to hear that, but I will certainly do my best to help you!

  I would recommend that you follow through this Re: Error message Microsoft visual c ++ runtime library through my colleague @SuperMario1 as these steps should be able to help solve your problem. This is a long thread, but the steps should help, so take your time and work through it.

  I would like to know how it goes for you

• I'm trying to install magic jack and keep to message to upgrade of the session windows-I've got ME and internet explore

  I'm trying to install magic jack and keep to message to upgrade of the session windows-I've got ME and internet explorer, what do I do?

  Windows Me is obsolete and is therefore your computer.  Consider the purchase of a modern computer.  Examples

• Restarting my computer (Dell... Microsoft XP), the system tries to install creative projects and requires the insertion of a CD that I don't have or want.

  Restarting my computer (Dell... Microsoft XP), the system tries to install creative projects and requires the insertion of a CD that I don't have or want.

  I tried all obvious ploys, but I can't always Cancel/remove this element which is a nuisance, because it prevents me to install other programs that I want to.
  Any other suggestions would be welcome.
   
  Original title: CREATIVE WINDOWS

  Robert,

  Try to run this Fixit: http://support.microsoft.com/mats/Program_Install_and_uninstall

• I am trying to install a program and I get entry point getdlldirectoryw could not be found in the library of links Dynamics kernel32.dll file and the same for shreggetvaluesw to shlwapi.dll

  I am trying to install a program and I get entry point getdlldirectoryw could not be found in the library of links Dynamics kernel32.dll file and the same for shreggetvaluesw in shlwapi.dll. How can I fix the problem.

  You have all your current updates?
  Go to windows updates and see if there are updates that you do not have installed.
  The error message seems to indicate that your copy of XP has not been updated.

  Updated and let us know if you still receive the error message.

  Thank you

  Marilyn

• I am trying to install Windows XP and during the process, a message appears with the title "RUNDLL__Error in iesetup.dll Missing entry: IEAccessSysInst. The process then stops and I cannot make progress.

  I am trying to install Windows XP and during the process, a message appears with the title 'RUNDLL '.
  "Error in iesetup.dll Missing entry: IEAccessSysInst.  The process then stops and I cannot make progress.

  Do not install an operating system is usually caused by (in order of probability):

  1. you are trying to install with other devices connected to the computer. Unplug them before trying to make an installation.

  2. "" "" defective installation media. "" Check the CD/DVD installation for scratches, tasks. Try another machine.

  3. bad optical drive. Test with another CD/DVD bootable or Exchange for a well-known work.

  4. faulty RAM. Test with Memtest86 + www.memtest.org . You will download the .iso image file to create a bootable cd. Burn the file with the third party burning software *-as an image, not in the form of data. Then start with the media that you did (you may need to change the boot priority in your BIOS so that the optical drive is the first boot device). The test runs immediately. The test run for an hour or two--at least that errors are seen immediately. If you get any errors, replace the RAM.

  * It is not necessary to have a third party burning software in Windows 7 since Win7 natively allows to burn an .iso. Other operating systems require it. A good free choice ImgBurn comes from www.imgburn.com .

  5. bad hard drive. Test with a diagnostic utility downloaded from site of the disc mftr... You create a bootable CD with the files you download. Burn the file with the third party burning software *-as an image, not in the form of data. Boot with the CD that you have done and do a full test of the reader. The physical tests fail, replace it.

  * It is not necessary to have a third party burning software in Windows 7 since Win7 natively allows to burn an .iso. Other operating systems require it. A good free choice ImgBurn comes from www.imgburn.com .

  6. other hardware components are faulty. MS - MVP - Elephant Boy computers - don't panic!

• I am trying to install Windows Update and get 800F080D for IE9. Why?

  I am trying to install Windows Update and get 800F080D for IE9.  Why?

  Hi KevinMiller

  
  1. don't you get the error only during the installation of internet explorer 9?
  2. when exactly you get the error message?
  3. that you get an error when installing other windows updates?

  I suggest you to check if you have all the prerequisites installed for internet explorer 9.

  http://support.Microsoft.com/kb/2399238

  
  Refer also to the links below and check if you did all requirements before installing internet explorer 9.
  http://support.Microsoft.com/kb/2409098

  http://Windows.Microsoft.com/en-us/Windows7/how-do-i-install-or-uninstall-Internet-Explorer-9

   

  I hope this helps.