I am trying to install Windows 7 and I get error 1316.A
I'M TRYING TO INSTALL WINDOWS 7 AND TOLD TO REMOVE DELL SUPPORT. WHEN I TRY to UNINSTALL DELL SUPPORT I GET ERROR 1316.A JOB NET ERROR OCCURRED during the ATTEMPT OF READING of THE FILE C:\WINDOWS\INSTALLER\DSC.msi
See...
Upgrade Windows Vista to Windows 7
http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7
Upgrade Windows Vista to Windows 7 (custom installation)
http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7-custom
Tags: Windows
Similar Questions
-
I am trying to install Windows 7 and I get the error code: 0 x 80070017.
I tried for months to install Windows 7 and I get the same error message. In fact, I gave up trying, but my computer is running slowly and gel a bit so I thought I would give it another chance. Can you help me?
See if this post will help you: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/windows-7-installation-error-code-0x80070017/2ea19373-2b4a-47e7-8584-04c6966589c3
J W Stuart: http://www.pagestart.com
-
Original title: Windows updates will not be installed.
Cannot install updates of security Windows KB2656353 and KB2656370 on Windows XP Home Edition version 2002 Service Pack 3. Get the error code 80070643 0 x (0 x 643). Installed Wiindows install 4.5 (KB942288). Used he Wizard repair, which indicates that the problem is resolved, but the updates will not install always. Please notify.
Hello
I suggest you to try the steps below and check if it helps.
Method 1: Reset components from Windows Update from the following link, which would help you to install the updates of windows. http://support.Microsoft.com/kb/971058
Method 2: If the problem persists, then try the steps from the link below.
http://support.Microsoft.com/kb/976982
Method 3: Uninstall all versions of the .NET Framework work completely from your computer by using the removal tool and then try to install the updates
See the link below:
http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx
Hope this information is useful.
-
I am trying to install Windows XP and during the process, a message appears with the title 'RUNDLL '.
"Error in iesetup.dll Missing entry: IEAccessSysInst. The process then stops and I cannot make progress.Do not install an operating system is usually caused by (in order of probability):
1. you are trying to install with other devices connected to the computer. Unplug them before trying to make an installation.
2. "" "" defective installation media. "" Check the CD/DVD installation for scratches, tasks. Try another machine.
3. bad optical drive. Test with another CD/DVD bootable or Exchange for a well-known work.
4. faulty RAM. Test with Memtest86 + www.memtest.org . You will download the .iso image file to create a bootable cd. Burn the file with the third party burning software *-as an image, not in the form of data. Then start with the media that you did (you may need to change the boot priority in your BIOS so that the optical drive is the first boot device). The test runs immediately. The test run for an hour or two--at least that errors are seen immediately. If you get any errors, replace the RAM.
* It is not necessary to have a third party burning software in Windows 7 since Win7 natively allows to burn an .iso. Other operating systems require it. A good free choice ImgBurn comes from www.imgburn.com .
5. bad hard drive. Test with a diagnostic utility downloaded from site of the disc mftr... You create a bootable CD with the files you download. Burn the file with the third party burning software *-as an image, not in the form of data. Boot with the CD that you have done and do a full test of the reader. The physical tests fail, replace it.
* It is not necessary to have a third party burning software in Windows 7 since Win7 natively allows to burn an .iso. Other operating systems require it. A good free choice ImgBurn comes from www.imgburn.com .
6. other hardware components are faulty. MS - MVP - Elephant Boy computers - don't panic!
-
I am trying to install Windows Update and get 800F080D for IE9. Why?
I am trying to install Windows Update and get 800F080D for IE9. Why?
Hi KevinMiller
1. don't you get the error only during the installation of internet explorer 9?
2. when exactly you get the error message?
3. that you get an error when installing other windows updates?I suggest you to check if you have all the prerequisites installed for internet explorer 9.
http://support.Microsoft.com/kb/2399238
Refer also to the links below and check if you did all requirements before installing internet explorer 9.
http://support.Microsoft.com/kb/2409098http://Windows.Microsoft.com/en-us/Windows7/how-do-i-install-or-uninstall-Internet-Explorer-9
I hope this helps.
-
I tried to install windows 7 and he shot his request now a windows key
original title: Windows
Is it possible to recover my windows vista? I tried to install windows 7 and he shot his request now a windows key. any suggestions?
Is it possible to recover my windows vista? I tried to install windows 7 and he shot his request now a windows key. any suggestions?
Hey BH32009
Contact the computer manufacturer and ask them to send vista recovery discs
they do it for a nominal cost of $
also ask them if you have a recovery partition on your hard drive to get back to the way you bought
you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer
Ask them of the exact key sequence
Save all data, because it will be lost, do the above
Walter, the time zone traveller
-
I am trying to install turbtax on windows 8 and I get error 1603. How can I fix it
I try to install the turbot on windows 8 and I get error 16032. How can I fix it?
Hello
Please contact the Microsoft Community.
I wish that refer you to this article-
If this is not enough, then I would you contact Turbo tax to support more-
https://support.TurboTax.Intuit.com/contact/
Let us know if you have other Windows-related issues in the future. We will be happy to help you.
-
I am trying to install a program and I get entry point getdlldirectoryw could not be found in the library of links Dynamics kernel32.dll file and the same for shreggetvaluesw in shlwapi.dll. How can I fix the problem.
You have all your current updates?
Go to windows updates and see if there are updates that you do not have installed.
The error message seems to indicate that your copy of XP has not been updated.Updated and let us know if you still receive the error message.
Thank you
Marilyn
-
I want to install windows 7 and I get an error saing that I need to install via windows PE? How can I go about it?
Hello
1. you try to perform a new installation of Windows 7?
2. where did you buy the Windows 7 DVD?
This particular message occurs generally if you try to perform an upgrade on the spot of a recovery disc or installation support OEM (Original Equipment Manufacturer) that contains a custom defined configuration and can't stand not running an upgrade installation.
The message means that you probably need to start using the installation media. You can also contact the manufacturer of your computer to determine the type of installation media that you have and to confirm what options are available when booting from the disc.
Here are some links that provide additional information about the installation of Windows 7:
http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7Alternatively, you can consult this article to understand what is Windows PE.
http://TechNet.Microsoft.com/en-us/library/dd799308 (v = WS.10) .aspx
-
my computer windows vista laptop will not go to the start menu to type my password
You are doing a Windows 7 upgrade starting in a race and activation of Vista operating system.
Try to repair Vista:
Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use it.
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner: http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Case of failure of the foregoing:
Reinstall Vista > and then upgrade to Windows 7.
http://social.answers.Microsoft.com/forums/en-us/w7install/threads
"Download Windows 7 installed and activated on your PC."
See you soon. Mick Murphy - Microsoft partner
-
Original title: Windows Live Mail for widows 7.
I've been using Live Mail in windows 7, I recently tried to install updates and a message that came if I installed the updates I would lose Live mail? then, they want us to buy outlook? or is there an equivalent version of the direct male for free download?
If you are talking about windows live mail (part of essentials) you shouldn't lose it when updating. If we know what updates, we would be safer.
You may need to upgrade to the newest version of WLM.
-
I am trying to install Windows XP SP3, but get the error number: 0 x 80244019
I followed all the instructions on the solutions provided, the fix for me did not work and the patch it seems to work (in other words, some of the settings needed to be changed), but when I tried the update for the gazillionth time it still does not work. I have an old computer HP Media Center - could that be the issue? It is a circular, thorny problem because I need to update my browser as well, but some of these commands do not work because I have not installed SP3. Ugh. What other options do I have? This all started because I had to run the recovery after a crash. I guess that he put everything back to factory default.
I also download errors when I tried the advanced download SP3 which says [1] KB936929-SP3-X 86 - ENU .exe is not a valid Win32 application...
Thanks, I had already tried that and it didn't work, but then I saw a tip in an other thread trying to install using another browser. Once I swithced to internet explore for Google Chrome download worked! Hallelujah.
-
Windows 8 installation failed, now trying to install again, and when I hit the installation, I get "internal error: cannot continue installation." He could have a few errors during download. Please Try Again '... I continue to try and try, re-download the installer of windows 8, and it still gives me this message. Help, please
OK guys, just delete the file located in:
C:\Users\
\AppData\Local\Microsoft\WebSetup Run the download from the beginning... everything should work fine then :)
-
When trying to install creative cloud. I get error 1
I try to install CC. I started in my room of hotel trying to install, but it froze because of the internet, and now I'm back at home all I get is error 1. It is half installed I have a mac and it appears with an icon at the top of my screen, but when I followed the instructions it gives me just an error message
Hello
Please visit:-error: "unable to install". Creative Office Cloud
-
These 2 updates failed repeatedly - don't know why. Help, please
Hello
http://support.Microsoft.com/kb/KB976982
You receive the error 643 0 x or 0 x 80070643 when you try to install the updates of .NET Framework by using Windows Update or Microsoft Update
or please repost your question in the correct windows update forum
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all
_______________________________________________________________
for questions of touchpad, please repost in the Vista Hardware and the Forum pilots;
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware?page=1&tab=all
Maybe you are looking for
-
HP Officejet Pro L-7780 All in one-Windows 8 64-bit - cannot scan to PC public folder
See this post: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup-e-g-Windows-8/OfficeJet-Pro-8500-A910-... has the hope to solve my problem in the same way. No go. I installed the new firmware (R2011NxNxeN0), which did not help. My public
-
How can I disable the unique - Fn key function keys?
I have a new Dell with Win 7 laptop, and the volume control function keys, reading, etc. when they are pushed to him only (without the need to push the Fn key at the same time). The problem is that I use these keys only to other purposes more how to
-
useDaylightTime() method detects bad DST
Hello I need urgent help on zone with BlackBerry API problem. The TimeZone.useDaylightTime () detects incorrectly. For example, I put system for simulator time zone is UTC-3 Montevideo, Montevideo - Uruguay now, time don't use DST, but code returns t
-
BB10 - problems w / dynamic populating list of images with the data of WebSQL
Hi all So I'm having a few problems with the definition of the element's onclick attribute when dynamic filling an image list. function listAllRooms() {} ... DB.transaction (function (tx) {}tx.executeSql ("SELECT * FROM ROOMS, [], {}, function (tx, r
-
The T510 has USB 3.0? Any Lenovo laptop comes with it yet?