I tried to install windows 7 and he shot his request now a windows key
original title: Windows
Is it possible to recover my windows vista? I tried to install windows 7 and he shot his request now a windows key. any suggestions?
Is it possible to recover my windows vista? I tried to install windows 7 and he shot his request now a windows key. any suggestions?
Hey BH32009
Contact the computer manufacturer and ask them to send vista recovery discs
they do it for a nominal cost of $
also ask them if you have a recovery partition on your hard drive to get back to the way you bought
you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer
Ask them of the exact key sequence
Save all data, because it will be lost, do the above
Walter, the time zone traveller
Tags: Windows
Similar Questions
-
I'm trying to install magic jack and keep to message to upgrade of the session windows-I've got ME and internet explorer, what do I do?
Windows Me is obsolete and is therefore your computer. Consider the purchase of a modern computer. Examples
-
I tried to install Windows Vista SP1 since July without success. I stopped trying in October but just tried it once more and I get the error code 8024200d message when it fails to install.
See this previous thread on the problem: http://www.google.com/search?hl=en&safe=off&rls=com.microsoft: en - US & q = + site: social.technet.microsoft.com + 8024200d & ei = hkchS4O6M9HolAfh8viLCg & a = X & oi = forum_cluster & resnum = 1 & ct = more results, & ved = 0CA0QrQIwAA
Unlimited installation and compatibility for Vista SP1 support is available free of charge from April 2008, through June 30, 2009. This support now will cost $59 us $ (or more) per incident.
Good luck!
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
XP installation problem
while trying to install windows xp on my computer (processor i3), she shows looking for previous versions of windows and then crashes the system. So please give me a solutionHi deva_reddy,
Looks like you are trying to do a repair of windows xp installation.
You use a windows installation cd?
Refer to the link below for the procedure to install windows XP using different methods.
http://support.Microsoft.com/kb/978307
Hope the helpfu.
-
I have a PC with Vista, I tried to install Windows XP, it was rejected, and now I don't have an operating system
Bruce,
Do you remember if you wanted to do a new installation or had you partitioned your hard drive to install it in a dual boot with Vista?
If you do not have a BONE now it sounds lik evous was the first choice that clears your current installation.
You need to reinstall Vista from your original media to recover your system if this is the case.
Unfortunately, if this is what you choose, you have lost all the data that was on your hard drive as well.
Sorry to be the bearer of bad new possible.
Rich
-
I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?
Hello
1. at what stage of the installation, the computer crashes?
2. what operating system was installed on your computer prior to this?
If you have the similar problem as mentioned in these links, you can follow these links and check if the problem persists:
Windows XP Setup stops responding (hangs) during the "Preparing Installation" phase
Windows XP does not meet the Message "Setup starts Windows XP"
Hope the helps of information.
-
I can't log on because of windows I tried to install windows 7 themes for xp
Hello
Step 1:
Check if you are able to boot to the desktop in safe mode. To start in safe mode follow the link given below.
http://support.Microsoft.com/kb/315222
Step 2:
If the problem does not occur in safe mode then boot to the desktop in normal mode and check that the third-party program is causing the problem. To configure your computer to clean boot follow the link below.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: When you are finished troubleshooting, follow step 7 in the article to start on normal startup.
Step 3:
If this does not help you try to perform a system restore and see if that helps.
http://support.Microsoft.com/kb/306084
Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I am trying to install Windows XP and during the process, a message appears with the title 'RUNDLL '.
"Error in iesetup.dll Missing entry: IEAccessSysInst. The process then stops and I cannot make progress.Do not install an operating system is usually caused by (in order of probability):
1. you are trying to install with other devices connected to the computer. Unplug them before trying to make an installation.
2. "" "" defective installation media. "" Check the CD/DVD installation for scratches, tasks. Try another machine.
3. bad optical drive. Test with another CD/DVD bootable or Exchange for a well-known work.
4. faulty RAM. Test with Memtest86 + www.memtest.org . You will download the .iso image file to create a bootable cd. Burn the file with the third party burning software *-as an image, not in the form of data. Then start with the media that you did (you may need to change the boot priority in your BIOS so that the optical drive is the first boot device). The test runs immediately. The test run for an hour or two--at least that errors are seen immediately. If you get any errors, replace the RAM.
* It is not necessary to have a third party burning software in Windows 7 since Win7 natively allows to burn an .iso. Other operating systems require it. A good free choice ImgBurn comes from www.imgburn.com .
5. bad hard drive. Test with a diagnostic utility downloaded from site of the disc mftr... You create a bootable CD with the files you download. Burn the file with the third party burning software *-as an image, not in the form of data. Boot with the CD that you have done and do a full test of the reader. The physical tests fail, replace it.
* It is not necessary to have a third party burning software in Windows 7 since Win7 natively allows to burn an .iso. Other operating systems require it. A good free choice ImgBurn comes from www.imgburn.com .
6. other hardware components are faulty. MS - MVP - Elephant Boy computers - don't panic!
-
I am trying to install Windows Update and get 800F080D for IE9. Why?
I am trying to install Windows Update and get 800F080D for IE9. Why?
Hi KevinMiller
1. don't you get the error only during the installation of internet explorer 9?
2. when exactly you get the error message?
3. that you get an error when installing other windows updates?I suggest you to check if you have all the prerequisites installed for internet explorer 9.
http://support.Microsoft.com/kb/2399238
Refer also to the links below and check if you did all requirements before installing internet explorer 9.
http://support.Microsoft.com/kb/2409098http://Windows.Microsoft.com/en-us/Windows7/how-do-i-install-or-uninstall-Internet-Explorer-9
I hope this helps.
-
I am trying to install Windows 7 and I get error 1316.A
original title: HOW DO FIX YOU ERROR 1316.A?I'M TRYING TO INSTALL WINDOWS 7 AND TOLD TO REMOVE DELL SUPPORT. WHEN I TRY to UNINSTALL DELL SUPPORT I GET ERROR 1316.A JOB NET ERROR OCCURRED during the ATTEMPT OF READING of THE FILE C:\WINDOWS\INSTALLER\DSC.msi
See...
Upgrade Windows Vista to Windows 7
http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7Upgrade Windows Vista to Windows 7 (custom installation)
http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7-custom -
Original title: Win hardware problem. 7 PRO
Trying to install windows 7 pro 64-bit, and while files are trying to finalize a message error shows up and says windows can't handle files to work with the hardware in my computer.
The only thing I can think is that maybe the Mobo is not compatible with windows 7, do not answer on the Asrock web page.
-Asrock Fatal1ty killer FM2 + Mobo. Processor AMD Athlon X 4 860 K. RAM Corsair 2133 (executed in 1866)
Or they are corrupt, try to get a new copy and try again.
For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.
It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.
Given that this option is no longer available, what are your options? See the article for more details:
How to: What are my options for Windows 7 reinstall media?
Make sure you scroll down and read the section:
What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?
-
Device drivers for a Win 7 install on Ubuntu system
Hello
I bought a Toshiba Portege M400-S5032 tablet PC reburbished that came with Ubuntu installed. I am trying to install Windows 7, but he does not see the disk partitions and the installation goes to the screen 'Select the driver to install' with no option. Because it is not find Windows device drivers, I went to the Toshiba site to see if I could download a full game, but I can not... So, how do you get drivers for Windows can install (or y at - it another way to work around it)?
Thank you!
The bios on fail safe defaults options are?
It will probably take the raid driver
-
ESXi 3.5 and when trying to install windows server 2008
I installed ESXi 3.5 on my server and successfully created a first virtual computer on which I am trying to install Windows server 2008 standard. I use VMware Infrastructure Client 2.5 from a Vista machine to access my virtual machine console.
Installation of Windows server is an ISO file located in the root directory of the ESX Server data store. Everything went well with the installation until one last server restart showed a screen stating "the password must be changed before logging on the first time' by clicking on 'OK' present a login for 'Administrator' screen, asking me to enter a password for the 'new' and 'Confirm password '.
Any attempt to enter a new password results (up to 14 characters, mixture letter & number) in a message "unable to update the password, the value provided for the new password does not meet the requirements of length, complexity or the history of the area.
As far as I know, I'm not usig a specific domain, have never been able to access Windows server 2008 to create an admin account. I don't know how to solve this problem. I am new to VMWare and Windows server 2008.
Any suggestion to move forward and allow me to have access to the server via the console?
Thanks in advance for your help, Claude
This isn't really a problem with VMware, but more of a problem of Windows 2008 password complexity requirements.
The account that she is not asking that you must change the password is the local administrator account.
And you have tried in upper case, lower case, numbers and special characters? Something like Win2008!@#$ maybe?
Jase McCarty
Co-author of VMware ESX Essentials in the virtual data center
(ISBN:1420070274) Auerbach
-
I tried to install windows 7 on my mac desktop and now I have a white screen. any ideas to return me to the world of apple?
How have you tried to install Windows 7?
-
I tried to install Windows 8.1 on my MAcBook Pro mid2010 running that el Capitan - failed
I tried to install Windows 8.1 on my MacBook Pro mid2010 running El - Capitan
Boot camp could locate the iso file or CD the I burnt out of it.
Any idea? should I try with Win 7?
On a 2010 model, ISO (or installer USB) is not supported. Can you burn W8.1 to a physical DVD, and try to install using Wizard of BC?
Please also see using 8.1 for Windows on your Mac with Boot Camp - Apple Support , and check to see if your specific model is listed.
Maybe you are looking for
-
Firmware update failed, TC is now unavailable and no led light
Found my TC this morning flashing yellow, found a FW update was available, clicked on update, downloaded FW but then he could not update and now TC is unavailable, I tried to reboot, but still no TC, before LED is off even on/after power on. How to t
-
"power on password or administrator password" at startup
Hi, on the screen of boot request administrator password or power on password. I have a g6 multi-screens, product HP laptop: B3P86UA, g6-1d48dx model. Thank you
-
I get the following error message when you install Windows XP Professional: a fatal error has occurred. Setup cannot continue. Please contact your support representative or a seller/provider untorised. Press to stop the system. I have real service pa
-
How do you put your Favorites in alphabetical order?
The @ top of browser bookmarks bar... OK, you click it and see all your Favorites... Now; How can I put them in alphabetical order?
-
Original title: My husband has a computer that is running Windows XP with WinHlp32.exe. I have a new computer with Windows 7 with 64 bit. We are interconnected. I could access its programs, edit files and save them to his system. In particular, O