I am unable to connect to new computer does not recognize one of my email addresses
Computer died this morning, another bought, downloaded Firefox, but can not get on my old account with my bookmarks, etc... tried all 3 of my email addresses, no luck.
Hi Tucsonjj,
Please try to avoid sharing any personally identifiable information in a public forum, the information could fall into the wrong hands.
There are two things that can be done, but first please understand that Firefox sync is not a reliable source of a return for Firefox profiles.
If there is another device, that the account of Firefox has been connected, make a backup of this profile. Backup and restore Firefox profiles information
If it isn't, I'm sorry, unless you have access to the profile of the previous computer file, is not a return to the top.
Tags: Firefox
Similar Questions
-
Cannot add any material and my computer does not recognize one of the ports
my computer won't recognize any port or plug and play devices. map of my camera not recognized when I insert in the port.my computer does not recognize one of the ports and if I try to download a driver for the printer, it starts and stops before installation. The computer had crashed and went blank. So I had to get a new hp boot disc and install it. Since then, it has happedned
Hi gramward1,
We recommend all first download and install the drivers for the chipset on the computer and check the difference.
To download the driver, visit the website of the manufacturer of the system.Step 1: You can also try to search for the hardware changes and check if the device is detected on the computer. To do this, try the following steps:
a. connect any USB device to the computer.
b. Click Start, click Run, type devmgmt.msc, and then click ok.
c. in the list of items, click one of the items, click the Action menu and click scan for hardware changes.
d. check if the device is detected.Step 2: Try to remove and reinstall all USB controllers
a. Click Start, click Run, type devmgmt.msc in the Open box and then click OK.
b. in the list of components, expand Bus USB controllers.
c. right-click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
d. restart the computer once you have removed all the USB controllers.
Note: USB controllers automatically install after you restart the computer.
e. plug the removable USB storage device and perform a test to ensure that the problem is solved.If the problem persists, run Microsoft he difficulty of this article: http://support.microsoft.com/kb/925196
Visit our Microsoft answers feedback Forum and let us know what you think.
-
New PC does not recognize one of my Apple products
New PC does not recognize one of my Apple products in iTunes
Make sure that iTunes is up to date.
-
drive external upwards using a windows live care, computer went down and now cannot recover save as new computer says it does not recognize backup Installer direct care. How doi recoverbackup on the new computer.
Thank you
E-mail address is removed from the privacy *.Hello
Webcam Live One Care is no longer available.
Please read the information contained in this thread about your problem (Steve Boots information link):
See you soon.
-
MY Lightroom 4 after relocation to the new computer does not recognize CR
I wish I bought a Phase rather Lightroom
The 7 D Mark II requires at least 5.7 Lightroom, so it cannot have previously worked with LR4.
Again, what is the exact version of Lightroom? (Help > Lightroom)
Maybe you have the versions 4 and 5 4 installed and opened by mistake?
-
I purchased Adobe Lightroom 5 who arrived on a disc. My new computer does not have a D drive (for dvd or cd). I'll be able to download my Lightroom 5 on my new system via an online connection?
Sure.
Download it from
Adobe - Lightroom: For Windows: Adobe Photoshop Lightroom 5.7.1
Adobe - Lightroom: For Macintosh: Adobe Photoshop Lightroom 5.7.1
Install and enter your serial number.
-
IS PowerShot A4000: My computer does not recognize my camera when it is connected, saying "Windows cannot open the device because the configuration (in the registry) is incomplete or damaged". This a recent phenomenon. I reloaded the latest Camerawindow software nothing works. Recommendations to solve this problem?
Problem solved. Recommendations by e-mail has helped. I had to use 'Device Manager' from the Vista Control Panel for adding new hardware. I also need to add a new driver. The Kodak in Windows Vista camera driver worked. The camera is now recognized. Thanks for the help.
-
I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?
Drive, interface in the crankcase of training controller, or the USB port or the cable may be faulty.
-
Computer does not recognize LaCie external hard drive when it is connected.
Should I just a 'driver' of the manufacturer so that windows recognize? Help, please.
The device is a hard drive (250 gb) bought in 2006. LaCie support has provided relevant solutions.
I disconnected the USB line, reconnected with the power of the unit it turned on and off while only plugged, unplugged, and made all possible combinations of many times. My computer does not recognize anything.
I can't find it in my computer, and also, the computer does not list the device in the Device Manager utility.
I have disabled the Windows Firewall.
The computer with which the external drive worked and one that currently does not recognize are model computers windows XP (2008).
Thank you very much for your help.
Thanks for the reply.
In the meantime and after reviewing all similar positions, it turns out that find the 'live' usb device does the trick.
So, other people with similar problems, try the usb cables at the back of the computer (all), then by restarting the connection there.
It worked for me.
Thanks again for the reply!
-
My computer does not recognize that I have two monitors connected.
I have a VGA splitter cable, but even after I used the cord to connect two cords vga to a port, the computer is only noted one of the monitors. So when I go into settings to try to get them to display both, or to identify, the computer notice only a single monitor. So the problem is that my computer does not recognize that there are two put monitors in place.
Cable splitter separates the single signal only. The computer only sees it as an output. You would need a different video card use the two forms as separate monitors instead of simply split the signal.
-
My computer cannot connect to the internet, the signal is excellent in the modem, but the computer does not recognize that there is a link. What could be wrong?
Hello
- What connection do you use?
- What is a wired or wireless?
- What happens when you try to start Internet Explorer?
- You receive an error message?
You can check these links:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
http://support.Microsoft.com/kb/956196
Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings
-
Just opened a new vista Windows upgrade disc and my computer does not recognize it? My computer always tells me to put a disc in when it is already. I can't my PID because I can not install the program. I can't get help from microsoft because I do not have my PID. Help please
Your optical disc drive must be able to read the DVD to install Vista.
See you soon. Mick Murphy - Microsoft partner
-
my computer with windows broken and now my new computer does not have windows, is it possible to get windows on my new computer from my old?
Hello
You tell us what type of license you have.
If the former was preinstalled, NO, you cannot transfer it.
Read this information:
If the laptop came with the preinstalled Windows operating system (Dell, HP, Acer, etc.), this product key supplied with the laptop is preinstalled OEM license and is not transferable.
OEM license/product key (systems of operating pre-installed on Dell, HP, etc.) is related to the first machine it is installed on and dies when dies of this machine.
The above applies also to OEM system builders licenses.
License of operating system in detail, that you buy and install yourself, are allowed to be transferred to another machine.
And retail licenses also can be installed on a machine at one time.
___________________________________________________
And please read this, you can:
http://www.Microsoft.com/OEM/en-GB/licensing/sblicensing/pages/licensing_faq.aspx#fBid=cbW6pY-wjS6
See you soon.
-
Try to install CS4 Design Premium - disabled since the old computer, new computer does not accept my serial number. Just wasted 2 hours on Adobe help line.
I sent you a private message that will help you (I hope).
because scammers can continue to check this thread, I don't want to enter here information that could help them and this is the reason why I deleted your last post and sent you a private message.
-
I recently purchased Photoshop elements 13. My employer just changed my computer (I am allowed and only use my personal computer) and the new computer does not have a CD-ROM drive. Is there a way to download the software items on my computer with the serial number and not the CD? Help!
You can download the trial and use your serial number of the drive to enable to make full use...
PSE 13 trial - http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements
Maybe you are looking for
-
memory max information hp pavillion dv6750ew
I can't to find max memory for my hp Pavilion dv6750ew laptop. Can you help me?
-
Hi all! I would like to make my project a bit more fancy, so I would like to make a small animation on the channel status indicator. Please see the attached Subvi, I have also attached a principal appeal VI, so you can see how I want to use. I would
-
How to find & download driver AVWNOTel.dll for Avery Wizard
I downloaded the Avery Wizard, but when I try to open it says that AVWNOTel.dll is not missing
-
Problems of network and Vista SP2
I read a lot of discussion and of internet articles explaining the problems with Vista SP2 update. I have 3 PC / laptop on my home network. A PC with Vista SP2 (cable), a Sony notebook (wireless) with Vista SP1 and a portable IBM (wired) with XP Pro
-
How can I fix a corrupt Windows Defender?
I can't uninstall Windows Defender, because it is not listed in the list of programs and the .exe is missing in the file, so I can't do it manually, or the other. I tried to reinstall, but a message pops up that it is already installed on the compute