Problems of network and Vista SP2

Similar Questions

• repeated problems with HP550 / Windows Vista SP2

  Hi all

  the following problems keep recurring and the help of windows update does not respond:

  (1) I get a reminder to register my new product - I already did.

  (2) Windows update - continues to not install updates correctly - whenever it starts

  I have tried many tips/tricks to solve installation problems - but does not

  Can anyone suggest a work around

  Thank you

  Hello

  For your #1 question:

  Start > programs > Accessories > system tools > Task Scheduler

  Look for the tasks listed on HP., if you see them you can delete them or distributes them to run once. Who should take care of the problem

  For your question #2:

  There are a few services that are needed for starting windows update to work correctly. (these are services that depend on it).

  Take a read of this thread (found on another forum). BlackViper.com, there a nice breakdown of the Windows Vista SP2 service configurations.

  Kind regards

  ERICO

  Published by erico on 2009-09-19 12:13

• Laptop HP 15-go99er: problem with network and WiFi

  Hey guys,.

  Does anyone know to solve this problem? I recently installed a new windows on my laptop and since then I can see is more available connections. I went to Device Manager and these drivers seems to have problems

  "Network controller"

  PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C & REV_01
  PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C
  PCI\VEN_168C & DEV_0036 & CC_028000
  PCI\VEN_168C & DEV_0036 & CC_0280

  ""PCI Device"

  PCI\VEN_1022 & DEV_1537 & SUBSYS_15371022 & REV_00
  PCI\VEN_1022 & DEV_1537 & SUBSYS_15371022
  PCI\VEN_1022 & DEV_1537 & CC_108000
  PCI\VEN_1022 & DEV_1537 & CC_1080

  Can anyone help, because I can't seem to find the proper drivers.

  Hello:

  For the wireless card, this driver should work...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127981-1 & CC = US & DLC = in & LC = on & os = 4158 & Product = 7174407 & sw_lang =

  For the E/D PCI controller, this driver should work, but you may need to install manually if auto installation does not work.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=vc_136254_1

  If it does not automatically install, go to Device Manager and click the controller PCI E/D in need of drivers.

  Click the driver tab.  Click on set to update driver.  Select Browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp66899.  Make sure that the include subfolders is selected and the driver should install.  Then restart.

• Problem WIFI network and update drivers for Qosmio X 500-12 L

  It's the X 500 wireless network.

  The drivers of these no longer up-to-date. The windows update Web site you will get 2,015 and on realtek you can find the update:

  worm 2017.2 date 10/13/2010

  Now, I tried those and they are fine, that only my problem is not getting solved... it seems that the UPPER BAND is not captured by Toshiba. I can connect to a 2.4 ghz without problem on the N range, but trying to find again a 5 GHz connection is a NO GO? bug?

  I have a sony vaio here too, wich perfectly detects it and connects to it fine (N range) so I think that there is a bug somewhere in the configuration of Toshiba.

  All suggestions, help welcome.

  Concerning

  Hello

  Speaking about 5 Ghz WLan do you mean 802.11 N standard?

  The frequency of 5 GHz is supported by IEEE 802.11 WLan standard A
  The standard 802.11 B and G work at 2, 4 GHz
  The standard 802.11 N runs at 2.4 2,4835 GHz and 5.15 GHz 5 725
  So you can use 802.11 N, as a 2, 4 GHz

  You can change additional settings in Device Manager-> card Wlan-> properties-> Advanced tab.
  I also recommend disable WLan Card to save energy.
  You can do it in the Windows 7 power management as well.

• A2109 2 problems with networking and an HDMI output

  I had an A2109 for Christmas and have 2 occurring of questions that I need help on.

  1. I was never able to get the HDMI to work. I tried 2 different cables, as well as 2 different TV and when I plug the microphone to the Tablet and the TV, my TV cable don't say no signal source. I got this tablet specifically for the HDMI output and flash support, so I can watch sports on the internet on our main TV.

  2. in the last week or so when I wake up in the Tablet, my apps does not connect to the internet. In the taskbar it shows that I am connected to the network. I open up chrome and you get a DNS error. To solve this problem, I turn off the Tablet and then turn it back on. This happens whenever I wake up.

  I've not being updated to JB again because I don't want to lose the capabilities of Flash

  As I have a follow-up has been able to solve these two issues.

  HDMI: the cables, I bought two bad ones were apparently. I bought another and that he had "snap" in as well and the TV started to show what was on the shelves. How lucky I am with this one?

  Network: Restarted my router and after a few days there were no problem.

• 7223cl Pavilion Notebook DV7: BIG PROBLEM! Networking and Ethernet drivers missing!

  I can't find the network drivers for windows 7 online because they offer only windows 8.1 - 10 online. I have a CRAVING for dv7 7223cl Notebook and reset it recently and when I reinstalled the windows software 7 there was neither a wireless or ethernet network driver on my list of devices. I can't find the drivers anywhere to transfer on a USB key! Help, please!

  Thank you for your time,

  -Collin

  Hello:

  Here are links to the drivers you need...

  Wireless:

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5229456&swItemId=ob_118499_1&swEnvOid=4058

  Ethernet:

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp56167.exe

• Linksys Phoneline network and Vista

  
  
  

• Problem with reinstalling/upgrading Vista SP2.

  On the initial installation attempt, I was prompted to uninstall PowerShell. I removed the PowerShell in the list of updates (KB928439) according to the instructions provided by Microsoft. About 2 minutes after installation, he continues to ask me to uninstall PowerShell. Suggestions... Please!

  Hello

  It is all MS has on this

  http://support.Microsoft.com/kb/950376

• Blue screen after Windows Vista SP2 installed on my TouchSmart IQ770

  
  

  All, I came across this thread, after having the same problem (constant BSOD after Vista SP2) installed.  The fix referenced by MS that contains a placeholder file.  However, this most recent patch http://support.microsoft.com/kb/975163/ contains even more recent versions of all the files in question.

  For this installation, I went to safe mode and disabled the wireless network card.  I copied the fix of a usbstick on the desktop.  After the reboot of the machine was stable enough to install this fix (before it would break before the fix might get installed).  After the restart, yet once again, I have reactivated the wireless card.

  The system seems to be stable again (its place for over an hour now, the previous record was 5 minutes approximately from SP2)

  I hope this helps someone to another Google search for Vista SP2 IQ770 BSOD USB

• Bug in Vista sp2

  It seems that XPS Document Viewer is not backward compatible after installing the Vista SP2.

  When a document is signed digitally with Vista SP2, the signature cannot be seen with Windows XP, the viewer of XPS documents.

  First of all, let me say:

  If the document has been signed by first using Windows XP and second signature that he has been signed with Windows XP or Windows Vista sp1. Everything works fine.

  I have 3 problems for example:

  1. the document was signed first by using Windows XP.  The second signature was signed with Windows Vista sp2.  The second signature is not visible to any user XP.  It seems fitting that the second signature was was never added to the document.  But the second signature can be seen by anyone with Windows Vista sp2.

  2. If the signatures of the first and second have been signed with Windows Vista sp2, then both signatures are visible to users of Windows Vista sp2, but not Windows XP users.  For Windows XP users, it seems that the document was never signed.

  3.                  3. If the document was signed by a user with Windows Vista sp2 first and then signed by a user with Windows XP, the document will give an error when opened by any user XP and Vista sp2 alike.

  In addition, if a document has been signed first with sp2 to Windows Vista, when the document is opened with Windows XP and I'm trying to view the details of the signature it says:

  Status of the signature: intention:

  Signature in the meantime:

  Signed by

  Is someone at Microsoft aware of this problem and what is someone working on it?

  Y at - it a fix for this problem?

  There is no work around?

  Hi Burtchy,
  I think that you should use the following update at least on the XP box. On each of them won't hurt.
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=B8DCFFDD-E3A5-44CC-8021-7649FD37FFEE&displaylang=en

  Check it out and let us know if you still have any questions.
  Matt
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• volmgrx.sys damaged during vista sp2 upgrade pc does not start

  I had this problem after downloading and installing SP2. Well actually the never finished SP2 update correctly because this problem has occurred. To be precise:
  1 - Download SP2 via windows Update and starts the installation.
  2 - installation routine was told he needed to restart to complete update so I clicked on restart
  3 - PC went in "installation of updates do not turn off" or something else
  4 - PC restarted, but could not start
  5 - went to Startup Repair where it could not solve the problem, but it has identified as being "C:\Windows\System32\Drivers\volmgrx.sys boot critical file is corrupt.

  That this problem had never occurred before that I can only assume that it was caused by a problem during the SP2 update. The problem is that I now have no way of fixing.

  -The PC will not boot in Vista
  -Startup Repair cannot fix the problem
  -The manufacturer system restore function seems to have been boosted by the problem of too and will not work
  -Booting from a recovery DVDs only gives options of startup repair (which does not solve the problem) or a clean install, I don't want to have to do.
  -I can not replace the corrupted version of the file with a known good because it is protected (access denied) and I have no way to change the attributes of protection to allow it to be removed, or replaced.

  Can someone please tell me how I can fix this apparently simple problem and avoid having to trash the system and rebuild it?

  Hello

  There is a forum especially for service pack issues

  they can offer better support it

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

• I can't install windows vista SP2 and problem with SP1

  So I installed SP1 with windows update and each update, it says service pack 1 in the list of installation. Second problem, I downloaded the file for SP2 and when I open it it just comes up with the error message "these data are incorrect."

  Hello

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, first of all the installation of SP1.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.

• Problem with wireless - Vista Network and Sharing Center does not recognize my connection!

  I use the Home Visa software and my network and sharing Center does not recognize my connection but I can access the internet without any problem. Previously, I was using a wireless router Linksys with an old box of AT & T internet with no problems. The problems started after I updated my AT & T internet box that made obsolete the linksys router and now the network share does not connect. I just have the problem of getting the network and sharing device recognizing that I am actually connected to a wireless network. I can't use my printer or share files with other people. I can't get my wireless printer to work if I restart my computer and I have the documents I want printed already sent to the printer. My network and sharing Center also works very well for a few seconds when I start my computer then it turns off again.

  Hello

  Method 1:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  You can also view the related items for more information.
  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Method 3:

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

  See also:

  Connect to a network with Windows Vista wireless

  http://TechNet.Microsoft.com/en-us/library/bb878035.aspx

• I have problems wireless on my Acer laptop which has Windows Vista. I am able to connect to my school of university network and used to connect to my home network.

  original title: Wireless on the Fritz

  I have problems wireless on my Acer laptop which has Windows Vista.  I am able to connect to my school of university network and used to connect to my home network (both are networks limited requiring a password or log in).  However, last week my computer stopped connecting to my home network (no one else has this problem with the home network).  I tried to fix the problem, but my computer says that "Wireless association failed because Windows did not receive response from the access point or wireless router."  That said also thatthe connection "(my wireless network)" has been cancelled.  This is perhaps due to a timeout or user action. »

  The only different thing I did last week was click option at my University 'connect long-term' instead of 'connect short term' to their wireless network.  Maybe who has messed up my settings?  That's what my University said of his record long term: "students, faculty and staff also have an option to easily record their computer (or other wireless devices), so that it is not necessary to authenticate each day they connect from the network wireless campus, to resources outside the University.»  However, these settings are saved on their network (I can access it online from another computer), so I think it is unlikely that he messed up my settings.

  I don't really know what the problem is.  Any ideas as to what I can do?  I don't want to reset my computer everything.

  Thank you!

  Hello

  You can view these methods:

  Method 1:

  I suggest you to disable any program of security on your computer and check if it solves the problem.

  After reviewing the question you must reactivate the security on your computer program.
  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.
  Method 2:
  I suggest also allows you to check in SafeMode with network.
  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
  Method 3:
  I also suggest you to check the settings of the router firewall.

• Windows Vista connected online but not shown on network and sharing Center or on the taskbar, leads to other problems

  I have a Dell Inspiron 1520 running on Windows Vista, my router modem is a Motorola SURFboard SBG901. A few months ago on this computer, I couldn't see that I was connected online either from right down icon in my taskbar (it shows just two monitors with an 'x', that when you highlight on he says "not connected, you are currently not connected to any network.")  I don't see it on my network and sharing Center which States: "not connected wireless connections are available." In terms of network it shows that my PC and then the line that has an x on him. If you click the x, or select diagnose and repair, he informs me that all is going well with my computer. If I go to connect to a wireless network, it shows that I'm connected to my network ready. I open one of my browsers and they all work very well, I can access any site without problem. I was not embarrassed with him at the time, but since then I moved into a new House and have a new service and everything, with this motorola modem cable. my new wireless network is a network unsecured, which of course, I want to fix it. I can connect to this network, but I can't access it through Windows properties to make sure. I read the manual of the modem, telling me to connect through an ethernet connection and access configuration manager using the ip address of my router on a browser, but which does not charge or the other. I have other devices (Ipod Touch and PS3) wireless I got other people come computers and they all detect the network but cannot connect to it. Thanks for any help.

  Hello
   
   
  I would like to ask you a few more things.
  1. how many network connections you have created?
  2. are there multiple NICs installed on the computer?
   
   
  Since this is a common problem and many users have solved this problem by using different methods.
   
  This can also occur if you frequently use several type of internet connections such as dial-up, Ethernet and LAN.
   
  As the article below also indicates that there could be multiple reasons for the same.
  The network adapter icon incorrectly displays a red "X" in the window management in Windows Vista network connections when the network adapter is connected
  http://support.Microsoft.com/kb/945925
   
   
  Method 1.
  I ask you to remove any network connection if you have created and then check.
   
   
  Method 2.
  For control please check in mode safe mode with Networking if the problem exists.
  Here's how:

  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to boot mode safe mode of Windows 7 with networking.
  e. when Windows starts, use check and Internet explore if the problem persists.

  For more information, see the articles below.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Troubleshooting in safe mode
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-mode
   
   
  I hope this helps.
   

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.