I am using ActionScript 3 in flash CS3, and everything is the color of a square next to my calendar

Similar Questions

• can you use a deskjet 970cse in black only mode when the color cartridge dries up

  can you use a deskjet 970cse in black only mode when the color cartridge dries up? Thank you, Jerry

  banhien information is very accurate. I would just add a bit of it. Because this printer uses a tricolor cartridge and a black, it should be one of the printers that will print with just the black cartridge installed. It is called print in backup mode. I should happen automatically when you remove the color cartridge and try printing. A message will arrive on the printer or the computer and ask you if you want to print in backup mode. Say yes, and it should let you print. Hope that helps.

• I recently tried to open a new pdf file using an existing program Acrobat Reader and it changed the extensions of all programs and .pdf desktop icons, making them unusable.  I uninstalled Reader and extensions have been fixed.  But when I installed the dr

  I recently tried to open a new pdf file using an existing program Acrobat Reader and it changed the extensions of all programs and .pdf desktop icons, making them unusable.  I uninstalled Reader and extensions have been fixed.  But when I installed the drive again - the latest version (DC) it happened again.  How can I fix it?  I am on Windows 7

  Hi donaldm78047015,

  Try the solution mentioned in this KB doc. https://helpx.Adobe.com/Acrobat/KB/application-file-icons-change-Acrobat.html

  Kind regards

  Nicos

• I don't have internet connection, so can I use offline adobe indesign, photoshop? and what is the product adobe cos cs6 is not available more...

  I don't have internet connection, so can I use offline adobe indesign, photoshop? and what is the product adobe cos cs6 is not available more...

  CS6 products are always available through Adobe:

  Buy CS6:
  ----------------------

  http://www.Adobe.com/products/catalog/CS6._sl_id-contentfilter_sl_catalog_sl_software_sl_c reativesuite6.html

• Flash CS3 and Flash CS5

  Is it possible that the code written in Flash CS5 Professional do not work properly in Flash CS3 Professional?

  Yes, new features are added to Actionscript between versions.  Given that CS3 is the first version, that it will not support all the features of coding that makes the CS5.

• Flash CS3 and FLVPlayback

  Hello.
  
  Is it possible to instantiate dynamically an FLVPlayback instance with ActionScript 3?
  I imported fl.video.FLVPlayback and Flash accused not knowing this class...
  
  Thank you
  Ian L.

  Ian,

  > Is it possible to instantiate dynamically an FLVPlayback instance with
  > ActionScript 3?

  Sure thing.

  > I imported fl.video.FLVPlayback and Flash accused of not knowing
  > This class...

  Just be sure to drag the FLVPlayback components component
  Panel in your library. After that, the following four lines (only for the)
  example) will do:

  Import fl.video.FLVPlayback;
  Player: FLVPlayback var = new FLVPlayback();
  Player.source = "" http://www.helpexamples.com/flash/video/caption_video.flv "; "
  addChild (player);

  David Stiller
  Co-author, Foundation Flash CS3 for designers
  http://tinyurl.com/2k29mj
  "Luck is the residue of good design."

• Flash CS3 bringing tears to the eyes...

  Hello
  
  Please check this perforated cap of a "corrupt": Flash CS3 swf
  
  http://www.fairtraderugs.com/corrupted_swf.PNG
  
  Can someone tell me why I get these horrible white "deviations" appearing in the published SWF (right image), but NOT in the original FLA (left image). And perhaps more importantly is what I can do on this corruption?
  
  I thought it was something to do with the cubic Bézier quadratic conversion when importing AI CS3, but I guess the Flash IDE can make it properly is not the cause of the problem?
  
  Thanks much for your thoughts.
  Rich

  What configuration file HAVE (layers)?
  I've seen this before in very rare situations and I know that there is a way to fix it-I am betting
  the original image is very small, right? If so - upwards of large - very large - scale before importing
  in Flash. Feel free to send me your file have:

  Chris at mudbubble DOT com

  Chris Georgenes / mudbubble.com / keyframer.com / Adobe Community Expert

  Ensadragon wrote:
  > Thank you for your thoughts guys.
  >
  > The results are identical when publishing to Flash Player 8 and 7.
  >
  > Because it is a vector model in a Flex RIA for customize the hand
  > products that have a high price level, it is not acceptable to continue with
  > this level of quality.
  >
  > I'm reluctant go along the path of the export to SVG from I and migration to
  > Silverlight (I think that they can make Béziers cubes at run time?), because I
  > become fond of the Flex framework, and I can't wait to hang it
  > with parts of the Livecycle Enterprise Suite.
  >
  > However, if I can't get the point of contact with customers, perfect, then all
  > the fun to be had under the hood is for nothing. Usability is everything.
  >
  > If Flex can offer graphic integration upscale with Illustrator, who
  > would be disappointing.
  >
  > Can someone at Adobe please shed some light on the underlying causes of
  > this type of problem and how to try a work-around?
  >
  > Thanks for your help,.
  > Rich
  >
  >
  >

• Flash CS3 ScaleMode (ScaleMode): want the swf to develop to fit full screen in html

  Hello

  I was struggling with the scaleMode property. I have a swf with a size of 900 x 565 stage. I would like to integrate this movie in html where it automatically fills the screen of any browser, regardless of the setting of the resolution of the user or the size of their browser window.

  This problem is caused when a main user of my project complained that the application is "too big" and she must scroll sideways and down to see all (the true challenge is that she prefers her monitor to be set at the lowest possible setting, for example 800 x 600). I might make the smaller film, but then those who prefer their higher resolutions (as I do, as well as other users) would be to find the film very small.

  When I put the scaleMode property to "showAll" to the root of the movie, it works fine if I shoot a real swf file (e.g. ) http://www.../myexample.swf ) and adjusts its size when I move the window upper and lower size. But if I pull up http://www.../myexample.html, the film remains fixed at 900 x 565

  I don't know there's a way to do it. Please help if you know the secret.

  r

  You must use a stir in % for width and height.

  If you want to fill the screen, change the width and height the two to 100% instead of the pixel dimensions.  In this way, it will fill the screen, and the scaleMode property will shrink/stretch it accordingly.

• What is the mozilla firefox update Shockwave Flash plugin AND what is the latest version of Adobe Flash Player?

  After update of mozilla firefox and come here to help another user pointed out that I had several Flash plugins below. Before updating, I was updating from mozilla firefox and Adobe. Of course, things were NOT up-to-date. I managed to delete the obsolete Flash and Adobe Flash Player plugins. I just want to know what that "more" updated the plugin and the player are while I know that I have the last and am new. I do the last firefox update now and I use Windows 7. Thank you! You people here are the best!

  Note that your system details list shows several Flash plugins.

     Shockwave Flash 14.0 r0
     Shockwave Flash 17.0 r0
  

  The plugin for Firefox is called Shockwave Flash and the latest version is 17.0.0.188

  When it installs, Flash by default to update automatically, but if you need to manually update, you can use one of these pages:

  • https://get.Adobe.com/flashplayer/ (uncheck all the unwanted extras)
  • https://www.Adobe.com/products/flashplayer/distribution3.html (one for the browsers 'plugin')

• DeskJet F4280 flashing Orange and "E" on the screen. refuses to print

  I have a HP DeskJet F4280 all-in-one printer.  It worked well for several years.  Today I went to print something and the printer did not respond at all.  I have printed many times before from this computer and it has always worked well.  There are several computers in my home using this printer, running under Windows 7 64-bit and Ubuntu Linux and all have historically worked well.

  On the control panel of the printer, there is a light under the ink level for the black cartridge blinking orange.  In addition, there are an 'E' in the display number (photo below).  Read the support forums, I managed to get it printed some kind of test page with these listed errors:

  • 1 pen in chute 1 is of unsupported type
  • 1 pen in chute 1 has put illegal region
  • 1 pen in chute 1 has bad locking bits

  I've attached a scan of this full page below.

  The ink cartridge is a genuine cartridge HP 60 XL.  The cartridge was filled once at a mall location "ink."  It works very well since being filled, until today.  I managed to print a page of a print job that I've put on hold and it looked very nice.  So there is definitely nothing wrong with the cartridge.

  I tried to replace the black cartridge with an old empty cartridge I had lying around the House.  This corrected the error reported on the control panel of the printer.  Since the cartridge is empty, when he tried to print something from that page came still Virgin, but at least the orange light stopped flashing.  When I put the problem cartridge in the printer started pointed out the error once again, with the amber light flashes and the "E" on the screen.

  How can I fix my printer to accept this black cartridge?  I don't want much out and blow $60 on a new cartridge when the one I have is quite good.

  Thanks in advance for any help.

  

  

  Hi denversc and natsemioldskul.

  The blinking light under the black ink indicator means it has not detected the ink cartridge. That means the cartridge is empty or gone bad. The 'E' error means that the printer detects something wrong with one of the cartridges.

  http://goo.GL/2lQQS

  In the case of denversc, as put in a black cartridge empty old deleted the 'E' error, the problem is with the cartridge. With the help of a charged cartridge may or may not have caused the problem. See the following link for more information on this topic:

  http://goo.GL/vJhvk

• You can run Photoshop CS3 and CS5 on the same system?

  I've done it before on another system where I had CS2 and CS3 installed and I could run either version, when I wanted.  At the time I have just never bothered to uninstall CS2.

  Now on this system, I'm tunning CS3 and I have some plug-ins that I use regularly and that are not compatible with CS5 and I'm not throwing new money for them.  So I wish I could install CS5 and especially use it but when I need to use the plug ins and then just switch to CS3.

  I noticed that a lot of programs does not these days on top another version.  So is there a reason that I won't be able to run them both?

  Altogether.  All versions of Photoshop can coexist at the same time, even if you can only run one at a time.

  It is usual to not install the older version, until you don't know than new not work very well.  If you have the space, never uninstall.  It is convenient to have around to answer questions, here for example.

  -Christmas

• ITunes screen keeps flashing on and off since the last update on windows PC.

  Hi, since the latest itunes update, my screen flashes on and off whenever I am in itunes.  ITunes crashes regularly.  I am able to download music without problem.  The flashing light does not occur when I'm in my own music, just at the moment when I am on itunes.  Any suggestions?  Thanks for the help!

  Download iTunes from http://www.apple.com/itunes/download/ 12.3.2.35 and reinstall.  Apple have eliminated a update in the last 24 hours (which very badly, they identified as a separate release or generation) which sets store flashing screen which affect the initial version (9 December) of 12.3.2.35.

• How to extract the same song, several times using different bit rates or formats and store all the digital music files in WMP 12 default on the same HDD music library

  Using Windows Media Player 12 (w/under Windows 7), "can I ripping the same song, several times, using different bitrates & and/or formats and store all the digital music files in the music library by default WMP - 12, on the same hard drive?

  1.) #1 goal: tear up the same song repeatedly, w / "different rates" as a WMA file.

  2.) #2 goal: tear up the same song repeatedly, w / "different rates" as an mp3 file.

  3.) #3 objective: NOT to each subsequent copy (version) of the song, deleted & and/or replaced by the previous version of the song [even].

  4.) question Bottom Line Up Front--> is Windows Media Player 12 (included with the Windows 7 operating system) are able to achieve '#1 objectives; #2; & #3 above?

  5.) details/example: I want to tear the piece "Maria Maria by Carlos Santana" to my laptop as a Windows Media Audio [WMA] file.  In addition, I would like to rip the song 'Maria Maria' three several times with 3 different bitrates in format WMA; and, as an MP3 file.  Therefore, my final result wished (after the extraction process), will take place the four 4 audio files split up as follows: (a) 'Maria Maria by Carlos Santana'--> Format: file WMA; Ripped @128 Kbps bitrate.  (b) ' Maria Maria by Carlos Santana'--> Format: file WMA; Ripped to the "Variable bit rate; (c) ' Maria Maria by Carlos Santana'--> Format: file WMA; Ripped commissioning "Lossless." and (d). 'Maria Maria by Carlos Santana'--> Format: MP3 file. Ripped @256 Kbps bitrate.

  6.) my preference: I do NOT want to rename the file (s). {for example, 'Maria Maria by Carlos Santana' renamed/changed for--> "Maria_Maria_by_Carlos_Santana_128kbps.wma",...} 'Maria_Maria_by_Carlos_Santana_256kbps.mp3 '; etc.}.  In addition, I am not concerned about the additional disk space that will be consumed after multiple copies of the same song with different speeds of transmission and different formats.

  7.) my experience w / Windows Media Player 10 (w / the operating system of Windows XP): using WMP - 10, my goal (s) described above is not a problem at all.  Simply insert the CD purchased by Carlos Santana, containing the song "Maria Maria"... Select the desired Format (WMA; WMA VBR; WMA Lossless; or mp3)... Select the desired flow rate (WMA... 128/160/192kbps_mp3: 128/192/256/320 kbit / s; etc.) ; and click on the "RIP" button to start the copy process on the hard disk of of Carlos Santana's "Maria Maria".  This process (w / WMP-10) would result in having the same song, copied on the hard disk, with levels of quality different "audio" (via the different bit rate settings); regardless of the format (MP3/WMA) which was chosen.

  8.) my experience w / Windows Media Player 11 (w / the operating system of Windows XP): using WMP 11, to described above of my objective (s) could not be reached e-a-s-i-l-y.  The problem with WMP - 11 - in short - which was after the desired selection "Rip settings" tab 'Options' of WMP - 11 (i.e., Format & Bit Rate) and heart-wrenching piece wanted to {'Maria Maria by Carlos Santana'} a moment later/second, WMP11 remove / would crush the previous version of the song [even].  Therefore, the program would NOT allow the user to have multiple copies of the same song on the hard drive of the PC; which obviously restricts a user to have the freedom to choose what level of quality digital audio, they prefer to listen to.

  9.) the ability to have multiple copies [at my descretion] of the same song (on my hard drive) with different bitrates and formats in my music library, is important for me because it has a direct impact on "how I enjoy MY music ', and in what form (audio quality), I choose to listen to my music.  {For example, when I exercise and listening to my camera, digital audio player (Zune), a song ('Maria Maria by Carlos Santana'), will usually be torn off at a lower rate due to the unit of capacity reduction of storage - compared to the storage capacity of notebook PCs/desktop/external hard drives PC.}  However, when I listen to my music through my home cinema or entertainment system (which contains a hard disk dedicated with a large storage capacity), I prefer to load the entertainment system with digital music files that have been ripped to WMA... with the bit being rate-setting is for the: settings "WMA Variable Bit Rate" or "WMA Lossless.

  10.) there you have it.  This is my first post in this forum.  I hope that [detailed] explanations, will be sufficient to encourage these "with knowledge & the hands on experience" using Windows Media Player 12 (as well as with WMP-10/WMP-11 respectively), by providing a [step] "How-to"... "solution to my situation.  It would be highly appreciated.  I'm looking forward-'the solution' - and relevant suggestions & and/or community feedback regarding my request for assistance.

  * Thank 'All' (that would) in advance... For your time & Assistance *.

  Certainly, you can, but I would say that they be in different folders, for your convenience as well as Windows.  You can create one for each debit/format, then you will know who is who.

  In Windows Media Player, on the toolbar, select Tools, Options, Rip, and then select the flow you want first, rip music, then change the folder (higher on the same tab) and rip again... and so on and so forth.

  When you are at home on your home theater, you can use the 320 bitrate folder, when you transfer to the Zune, you can use one of the lower bitrate files (although I personally tear it up to 320 and let the Zune reduce as he wants, even with the iPhone via iTunes, hard drive space is not really a problem here) my server has several hard drives, and I can always add more if and when space is low!

• How to charge the PS CS3 and CS4, after the disk (C) computer crash?

  Had a computer disk (C) in Win10 crash; desktop computer and need to reload programs! How can I recharge

  My PS CS3 and CS4, reloaded actually programs them but need to activate without the need of upgrades. HOW TO MAKE!

  If CS3 is an upgrade, it would need a serial number to a version prior to installation qualification and the serial number for CS3 would be eligible for the upgrade to CS4.

  If you have your registered Adobe products, you can go online and get them.

  Gene

• Creative Suite CS3 and Bridge leaving the opening because I had to install a new logic board in my Mac Pro w 2008/OSX Yosemite

  The death of my logic board, installed a new in my Mac Pro (2008) with OS X Yosemite. Photo Shop CS3 and Bridge quit overtime trying to open a picture.   I tried to uninstall Creative Suite CS3 and reinstall.  Did not help.  How to make it up and running again?

  Move on to the General bridge Discussion