I ask for child Pages without a Parent?

Similar Questions

• print Web ask for drivers, page not found appears, windows 7 64.

  WebPrint cannot find the driver updated for windows7 64 bit. have deskjet4500 and new software installed, any ideas?

  So you're referring to HP Smart Web Printing, it's more clear now

  The HP Smart Web Printing is compatible with Internet Explorer 6, 7 and 8.

  For Internet Explorer 9, you will need to remove the HP Smart Web Printing and install the HP Smart printing instead, as shown below:

  http://support.HP.com/us-en/document/c02994297

• Share documents via link pages without asking for user name

  Hello, it is possible to share the page via link document without asking user name when someone opens the link? I only want to share the document for reading does not work. So I don't think that it is necessary to request user name.

  Hi erino72,

  Thank you for using communities Support from Apple!

  I understand you want to share a Pages document with someone, without him asking for request a user name.  Given that you're just trying to share a document for reading instead of calibration, then I recommend that you just send a copy by following the steps in the link below:

  Send a copy of a document

  Take care.

• Page access without asking for password

  Dear all,
  
  is there a procedure to access the APEX page without asking for password?
  
  I mean when we run the application, it asks for a password to go further and I don't have it that this password. (I want to spend 101 page (login).
  
  Please help me in this regard
  
  Thank you
  Kamran

  Hello

  The Apex witch version do you use?

  If 3.x or later version
  Publish your pages.
  http://download.Oracle.com/docs/CD/E14373_01/AppDev.32/e11838/bldr_pgs.htm#sthref617

  Or change the authentication scheme any application
  http://download.Oracle.com/docs/CD/E14373_01/AppDev.32/e11838/sec.htm#sthref1914

  Kind regards
  Jari

• How to create a child window without closing the parent window

  Hi all

  I have a requirement to create a child window without closing the parent window. I have to click on an element in the parent window, then is expected to open a child window. The parent window must not be closed before you close the child window.

  Kindly help me in this.

  Thank you and best regards,

  Myvizhi

  Hi all

  I found the solution for this. I created a new page. Then I created an article in the style of link in the parent element, and I put the following properties in the link element:

  Destination URI: OA.jsp?page=/seagate/oracle/apps/seasoa/que/webui/SeaSoaHeaderDetailPG&headerId={@ErrHeaderId}&retainAM=Y&addBreadCrumb=Y&backPage=S

  Target framework: _blank

  This opens the new child window without closing the parent window.

  Thank you and best regards,

  Myvizhi

• Problem restoring last Session in Firefox. It restores the last session without asking for password

  whenever computer stops because of the cut to the top or any other reason while you work in Mozilla Firefox as the use of Facebook. When you turn on the computer and open Firefox it stores the session, without asking for password or username that the effects seriously privacy.i has been using Facebook on Mozilla and my computer shuts down after a few minutes, another has turned on the computer and it went into my account on Facebook because of the last session of restoration. Please, do something about it. This is a larger problem in Firefox

  You can set the browser.sessionstore.privacy_level pref 2 (never) or 1 (no HTTPS, default in the Firefox 3 versions) on the topic: config page to disable the registration of cookies via session restore.

  • http://KB.mozillazine.org/browser.sessionstore.privacy_level

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

  • Use the filter at the top bar of the on: page config to more easily spot a preference.
  • Preferences that have changed see the bold (user set).
  • Preferences you can restore the default value or change via the context menu.

• Email application connects directly without asking for password.

  Hello

  On both a computer running Windows 7 and another running Windows 10 whenever I click my email icon on the bar in the start menu, or start it takes me directly in my emails without having to enter my password, can someone please tell me how I can fix this so that my password must be entered before I can access the emails.

  I have a hotmail.com email address and access it through Windows Live Mail.

  Best regards

  15 IRRITABLE

  What do you mean by "the page e-mail always open automatically?  If you mean that the WLM program opens, it is a normal behavior. You will ask for a password when you click send/receive.

  Do you mean a password you want before WLM opens at all?  If so, it is not feasible.  I know not all programs Email works this way.

• A child page carry the status parameter menu navigation of the parent page?

  Hello. Newbie here.

  I used the menu widget to create a navigation bar with my pages four high-level, set their State normal-rolling-down-active as you wish, and it works very well with these top-level pages. However, I have about ten child pages under one of the pages more high level. When one of these child pages is active, the status of link to its parent page is not used. The link is in its normal state.

  Is it possible to have the status of a parent page navigation link apply to child pages to the title of this page?

  Example: Four top-level pages are HOME, COLLECTIONS, ABOUT, CONTACT.

  COLLECTIONS has ten pages of child, and I try to have the COLLECTIONS navigation link must be in its active State for all the child pages. Possible?

  Thank you very much.

  Hello

  It comes by default as only the current page will retain the set active state.

  We already have that in our list of features.

  Thank you

  Sanjit

• Roots/path & this.parent - asking for simple clarification

  Step - the sandbox is where all things happen.
  MovieClip - an object that can be placed on the stage or in layers or attached to other clips.

  Layers of MovieClips on stage
  Example:
  Stage > MC1 > MC2 > MC3
  Family analogy to the hierarchy:
  Environment > Grand Parent > Parent > child

  (1) for access to the control of the MCs of the Document (stage) class
  -If the STM is brought on stage and given names use you that name to control them. (Logic)
  -If an object is dynamically added to the step how is it accessible? (Confused)

  2) access control of MCs of MCs on the stage who '.as' file by running.
  -Can change the properties of other MCs MCs? As scaleX, scaleY properties view? (Unknown/confused)

  'This' and 'Parent '.
  -this.parent.mc - when it does exactly?
  -parent.mc - where it is exactly?
  -mc - when it does exactly?

  Usage example: Stadium > MC1 > MC2 > MC3

  In step (Document class) is access MC3 then use: "mc3".
  When MC3 accesses MC1 use: "this.parent.mc1".
  When MC2 accesses to use on stage: 'scene' example 'stage.width.
  Vaguely is that kind of how it works?

  
  QUESTION--= =-

  If someone is willing to clarify all the pieces of this or has a fan friendly use of 'This', 'Parent' and appropriate use of the roots depending on where you are on the stage or in a MovieClip and how to properly refer to an another MovieClip or the scene would be useful. Forgive me if I have an abuse of words, terms. I use Adobe Flash Professional CS5 and AS3.0

  In AS3 you can reference objects by name or by reference. In AS2 you mainly referred to objects by name, so this may be confusing for some newcomers to AS3. A name he set, for example, when you drag a clip to the stage and type an instance name. A reference, on the other hand, is just an object that points to another object. You must create a reference when you dynamically create some MovieClips, for example:

  var mcRef:MovieClip = new MovieClip();

  The variable "mcRef" is a reference to this new MovieClip, however it didn't name. You can use "mcRef" as you would a named instance, the definition of the properties as "mcRef.x = 100", etc.. A reference is much more useful than a name, because it can be spent in the different application fields for you to access objects that would otherwise be difficult. For example, you can use a reference to refer to a deeply nested MovieClip without having to type it every time:

  var mcRef:MovieClip = myMovie1.nestedMovie1.nestedMovie2.nestedMovie3;

  mcRef.alpha = 0.5;

  The "parent" means the container that particulat object resides in. So take the example of "mcRef" above, the "mcRef.parent" would be "nestedMovie2". "mcRef.parent.parent" would be "nestedMovie1" and "mcRef.parent.parent.parent" would be "myMovie1". For dynamically generated clips, the parent will be the subject of container you called "addChild()" add this child element to the display list. For example:

  myParent.addChild (myChild);

  The property "this" refers to the scope at which you call it. So, if you are in the document class, you call 'this', he referred to the scene. If you are in an external class, then it refers to the instance of the object of this class. This will allow you to access all of the properties in this scope, such as "this.x = 0", "this.alpha = 0.5", etc.. ". It will also allow you to cross to the top of the display list as in the use of «this.parent» Keep in mind that you do not explicitly refer to 'it', it is assumed. So you can easily just say 'x = 50' and it's the same as "this.x = 50".

  Virtually all of the common properties are public (like x, y, scaleX, alpha, etc.) so as long as you have a reference to an object, you can change its properties from anywhere.

  In general, you want to give their own class objects (of right in the library and go to the linking options). So lets say you have a graphic square, you can give it a class of "Square". If it's just a chart, with no particular feature, so he can't give it an external class file (IE Square.as). If you want it to have some custom methods and properties you need this external class. However, if you just want to add a static image on stage, then you can just use the auto-generated class. Anyway you if instantiating the object as follows:

  var mySquare:Square = new Square();

  addChild (mySquare);

  If you want to add another square that you could do this instead:

  var mySquare2:Sqaure = new Square();

  mySquare.addChild (mySquare2);

  Now, if you want to access mySquare2, you always use the reference "mySquare2.x = 100" for example. Stays of reference within the scope you created. Thus, for example, the following would NOT work: "mySqaure.mySquare2.x = 0". That works only with a named instance, not with references. You can, however, still use "mySquare2.parent" and which refers to "mySquare.

  I hope this helps.

• A Web site can store data for offline use without asking?

  In options, advanced, network, web content offline and the user data, I 'tell me when a website asks to store data for use in offline mode"checked

  And then in the box below that lists Web sites that are allowed to store data for offline use there is an entry "https://forecast.io".

  This site never asked me to store data offline, and I never did anything to him. The website showed there before, I removed it and now it's back.

  So, since I have the box checked to tell me when a site asks you, means that there is not just ask?

  Yes, a Web site can store data for offline use without asking and can do even if you have checked the option 'tell me when a website asks to store data for use in offline mode', because this option does not work correctly. See the bug: https://bugzilla.mozilla.org/show_bug.cgi?id=959985

  As far as I know, it does not mean that the site simply "did not", it's just that the option does not work (or maybe only works in the case where the data are larger than the pref in offline mode - apps.quota.warn?)

  The workaround given by cor - el above, must currently off - apps.allow_by_default set to false.

• After deleting saved password and the connection to outlook he autologing got me in without asking for password, how do I stop this?

  I've removed the password registered and logged, after going to outlook.com it comes automatically me relogs without asking for a user name or password.

  Hello qqquestion, websites usually set cookies to store information that your browser is currently connected, so you have to make them disappear too: delete cookies to remove the information from Web sites is stored on your computer

• Is there a way in which I can download iBooks content directly to iCloud by car through my device (iPhone or iPad) without the use of a Mac? If it isn't, I suggest and ask for an update which includes my needs inside. Thank you

  Is there a way in which I can download iBooks content directly to iCloud drive through my device (iPhone or iPad),without the use of a Mac?

  Otherwise, I suggest and ask for an update which includes my needs inside. Thank you

  See synchronize ePub, Books author iBooks and PDFs with iBooks and iCloud - Apple Support.

  TT2

• Recent update asking for permission to put on my camera and audio without my knowledge, what then?

  Recent update asking for permission to put on my camera and audio without my knowledge, what then? Does this mean that Big Brother or anyone who can turn my Audio/video and see what I do?

  Firefox will always ask permission each time before the video/audio recording is turned on - then only you can activate it.

  the authorization is used for technologies such as webrtc: https://blog.mozilla.org/blog/2013/09/17/webrtc-now-available-across-mobile-and-desktop-with-new-firefox-for-android-compatibility/

• PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  Vista - Windows 7 network connection. username and password is unknown.

  Hello

  I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  If someone could answer this question, it would be great.

  Hello
  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• VPN connects without asking for a password!

  Hello

  I just moved my setup lab work VPN to my main router, everything works planned, except that when I try to connect with VPN, it connect directly WITHOUT asking for a Login or password, I don't get the context menu!

  Two routers an equal (C1841) HW and SW (system image file is "flash: c1841-advsecurityk9 - mz.124 - 24.T1.bin")

  Here below the full working script:

  (I know I have to clean, I'll do it next week)

  Best regards

  Didier

  ROUTER1841 #sh run

  Building configuration...

  Current configuration: 8440 bytes

  !

  ! Last configuration change at 10:27:45 gmt + 1 Sunday 30 January, 2011 by admin

  ! NVRAM config update at 00:29:33 gmt + 1 Sunday 30 January, 2011 by admin

  !

  version 12.4

  horodateurs service debug datetime localtime

  Log service timestamps datetime msec

  encryption password service

  !

  hostname ROUTER1841

  !

  boot-start-marker

  boot-end-marker

  !

  forest-meter operation of syslog messages

  logging buffered 4096 notifications

  enable password 7 05080F1C2243

  !

  AAA new-model

  !

  AAA authentication login userauthen local

  AAA authorization groupauthor LAN

  !

  AAA - the id of the joint session

  clock time zone gmt + 1 1 schedule

  clock daylight saving time gmt + 2 recurring last Sun Mar 02:00 last Sun Oct 03:00

  dot11 syslog

  no ip source route

  !

  No dhcp use connected vrf ip

  DHCP excluded-address IP 192.168.10.1

  DHCP excluded-address IP 192.168.20.1

  DHCP excluded-address IP 192.168.30.1

  DHCP excluded-address IP 192.168.100.1

  IP dhcp excluded-address 192.168.1.250 192.168.1.254

  !

  IP dhcp pool vlan10

  import all

  network 192.168.10.0 255.255.255.0

  default router 192.168.10.1

  lease 5

  !

  IP dhcp pool vlan20

  import all

  network 192.168.20.0 255.255.255.0

  router by default - 192.168.20.1

  lease 5

  !

  IP dhcp pool vlan30

  import all

  network 192.168.30.0 255.255.255.0

  default router 192.168.30.1

  !

  IP TEST dhcp pool

  the host 192.168.100.20 255.255.255.0

  0100.2241.353f.5e client identifier

  !

  internal IP dhcp pool

  network 192.168.100.0 255.255.255.0

  Server DNS 192.168.100.1

  default router 192.168.100.1

  !

  IP dhcp pool vlan1

  network 192.168.1.0 255.255.255.0

  Server DNS 8.8.8.8

  default router 192.168.1.1

  lease 5

  !

  dhcp MAC IP pool

  the host 192.168.10.50 255.255.255.0

  0100.2312.1c0a.39 client identifier

  !

  IP PRINTER dhcp pool

  the host 192.168.10.20 255.255.255.0

  0100.242b.4d0c.5a client identifier

  !

  MLGW dhcp IP pool

  the host 192.168.10.10 255.255.255.0

  address material 0004.f301.58b3

  !

  pool of dhcp IP pc-vero

  the host 192.168.10.68 255.255.255.0

  0100.1d92.5982.24 client identifier

  !

  IP dhcp pool vlan245

  import all

  network 192.168.245.0 255.255.255.0

  router by default - 192.168.245.1

  !

  dhcp VPN_ROUTER IP pool

  0100.0f23.604d.a0 client identifier

  !

  dhcp QNAP_NAS IP pool

  the host 192.168.10.100 255.255.255.0

  0100.089b.ad17.8f client identifier

  name of the client QNAP_NAS

  !

  IP cef

  no ip bootp Server

  IP domain name dri

  host IP SW12 192.168.1.252

  host IP SW24 192.168.1.251

  IP host tftp 192.168.10.50

  host IP of Router_A 192.168.10.5

  host IP of Router_B 10.0.1.1

  IP ddns update DynDNS method

  HTTP

  Add http://dri66: [email protected] / * *//nic/update?system=dyndns&hostname=mlgw.dyndns.info&myip=[email protected] / * //nic/update?system=dyndns&hostname=mlgw.dyndns.info&myip=

  maximum interval 1 0 0 0

  minimum interval 1 0 0 0

  !

  NTP 66.27.60.10 Server

  !

  Authenticated MultiLink bundle-name Panel

  !

  !

  Flow-Sampler-map mysampler1

  Random mode one - out of 100

  !

  Crypto pki trustpoint TP-self-signed-2996752687

  enrollment selfsigned

  name of the object cn = IOS - Self - signed - certificate - 2996752687

  revocation checking no

  rsakeypair TP-self-signed-2996752687

  !

  !

  TP-self-signed-2996752687 crypto pki certificate chain

  certificate self-signed 01

  30820246 308201AF A0030201 02020101 300 D 0609 2A 864886 F70D0101 04050030

  2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30

  69666963 32393936 37353236 6174652D 3837301E 170 3130 31313330 31393036

  34355A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D

  4F532D53 5369676E 656C662D 43 65727469 66696361 74652 32 39393637 65642D

  35323638 3730819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101

  8100E1D0 6D1EDC8A D7C6D4C4 FADC711E FB52B082 4F81BF1E 9B5BD3A0 DDB505E2

  6E69B426 47168821 AA60E9ED C4B3F95B C0830935 F6B395BA EB6CFC82 E27B75EC

  9 258765 4690634 628EBF91 CBF13884 F5DA31EF 44C3D330 C9FF0D27 E45DE343

  5F5EE55B A4B53946 56429179 15687FFE 63A7C25C 259FA18E DB20F8C5 5F3065E1

  02570203 010001 HAS 3 1 130101 FF040530 030101FF 30190603 0F060355 6E306C30

  551 1104 12301082 0E524F55 54455231 3834312E 64726930 1 230418 1F060355

  30168014 6144EDD8 070B697B 38FC3D5E A2501396 D885B4D5 551D0E04 0603 301D

  16041461 44EDD807 0B697B38 FC3D5EA2 501396 85B4D530 D 8 0D06092A 864886F7

  010104 05000381 810099FA B5F4D0B0 D51DA525 1AB96481 1D1732B3 CD080412 0D

  2255E8DB 84823CF5 ED9C077C 1FADFF17 A9A1D4BA B69B39B0 47A9CBA7 4A97C1E5

  6A1B6FBD 511BA8AD 3E716EC3 654980DA F16A3B47 CE7BC6A4 1902600E CB1373E2

  863C 6352 9074B62A 15E74894 BEDEDC14 D85753AF AD2EF852 6A4B2588 9759CABD

  42AD878C 58504629 BE48

  quit smoking

  !

  !

  VTP version 2

  username Admin privilege 15 secret 5 $1$ gAFQ$ 2ecAHSYEU9g7b6WYuTY9G.

  username cisco password 7 02050D 480809

  Archives

  The config log

  hidekeys

  !

  !

  crypto ISAKMP policy 3

  BA 3des

  preshared authentication

  Group 2

  !

  ISAKMP crypto client configuration group 3000client

  key cisco123

  DNS 8.8.8.8

  domain cisco.com

  pool VPNpool

  ACL 150

  !

  !

  Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT

  !

  Crypto-map dynamic dynmap 10

  Set transform-set RIGHT

  !

  !

  card crypto client clienmap of authentication list userauthen

  !

  card crypto clientmap isakmp authorization list groupauthor

  client configuration address map clientmap crypto answer

  10 ipsec-isakmp crypto map clientmap Dynamics dynmap

  !

  !

  !

  property intellectual ssh time 60

  property intellectual ssh authentication-2 retries

  IP port ssh 8096 Rotary 1

  property intellectual ssh version 2

  !

  !

  !

  interface Loopback0

  IP 192.66.66.66 255.255.255.0

  !

  interface FastEthernet0/0

  DMZ description

  IP ddns update hostname mlgw.dyndns.info

  IP ddns update DynDNS

  DHCP IP address

  no ip unreachable

  no ip proxy-arp

  NAT outside IP

  IP virtual-reassembly

  automatic duplex

  automatic speed

  clientmap card crypto

  !

  interface FastEthernet0/0,241

  Description VLAN 241

  encapsulation dot1Q 241

  DHCP IP address

  IP access-group dri-acl-in in

  NAT outside IP

  IP virtual-reassembly

  No cdp enable

  !

  interface FastEthernet0/0.245

  encapsulation dot1Q 245

  DHCP IP address

  IP access-group dri-acl-in in

  NAT outside IP

  IP virtual-reassembly

  No cdp enable

  !

  interface FastEthernet0/1

  Description INTERNAL ETH - LAN$

  IP 192.168.100.1 address 255.255.255.0

  no ip proxy-arp

  IP nat inside

  IP virtual-reassembly

  Shutdown

  automatic duplex

  automatic speed

  !

  interface FastEthernet0/0/0

  switchport access vlan 10

  spanning tree portfast

  !

  interface FastEthernet0/0/1

  switchport access vlan 245

  spanning tree portfast

  !

  interface FastEthernet0/0/2

  switchport access vlan 30

  spanning tree portfast

  !

  interface FastEthernet0/0/3

  switchport mode trunk

  !

  interface Vlan1

  IP address 192.168.1.250 255.255.255.0

  IP nat inside

  IP virtual-reassembly

  !

  interface Vlan10

  IP 192.168.10.1 255.255.255.0

  IP nat inside

  IP virtual-reassembly

  !

  interface Vlan20

  address 192.168.20.1 255.255.255.0

  IP nat inside

  IP virtual-reassembly

  !

  Vlan30 interface

  192.168.30.1 IP address 255.255.255.0

  IP nat inside

  IP virtual-reassembly

  !

  interface Vlan245

  IP 192.168.245.1 255.255.255.0

  IP nat inside

  IP virtual-reassembly

  !

  IP pool local 172.16.0.1 VPNpool 172.16.0.200

  IP forward-Protocol ND

  no ip address of the http server

  local IP http authentication

  IP http secure server

  !

  IP flow-cache timeout idle 130

  IP flow-cache timeout active 20

  cache IP flow-aggregation prefix

  cache timeout idle 400

  active cache expiration time 25

  !

  !

  IP nat inside source static tcp 192.168.10.68 5800 interface FastEthernet0/0 5800

  overload of IP nat inside source list 170 interface FastEthernet0/0

  IP nat inside source static tcp 192.168.10.68 5900 interface FastEthernet0/0 5900

  overload of IP nat inside source list interface FastEthernet0/0.245 NAT1

  IP nat inside source static tcp 192.168.10.10 80 interface FastEthernet0/0 8095

  !

  access-list 150 permit ip 192.168.10.0 0.0.0.255 172.16.0.0 0.0.0.255

  access-list 170 refuse ip 192.168.10.0 0.0.0.255 172.16.0.0 0.0.0.255

  access-list 170 permit ip 192.168.10.0 0.0.0.255 any

  access-list 180 deny ip 192.168.10.0 0.0.0.255 172.16.0.0 0.0.0.255

  access-list 180 permit ip 192.168.10.0 0.0.0.255 any

  not run cdp

  !

  !

  !

  route NAT allowed 10 map

  corresponds to the IP 180

  !

  !

  !

  control plan

  !

  Line con 0

  Speed 115200

  line to 0

  line vty 0 4

  access-class 5

  privilege level 15

  Rotary 1

  transport input telnet ssh

  line vty 5 15

  access-class 5

  Rotary 1

  !

  Scheduler allocate 20000 1000

  end

  Didier,

  You can configure the router to accept the connection of customer VPN without XAUTH (extended authentication), so by this authenticating just VPN client itself, not the user.

  But, depending on the configuration, you will be prompted for user/pass.

  Are you saying the client connects very well and the tunnel is fully established without this prompt?

  Federico.