I bought a Windows 7 Starter upgrade at home, where is my activation code? Why it has not been sent?

Similar Questions

• Sharing of readers do not reconnect - error "an error occurred during connection [drive letter]: [share name] Microsoft Windows network: the local device name is already in use." This connection has not been restored. »

  Original title: Shared readers do not reconnect

  I have two PCs connected wireless. A laptop (Vista Business) was the drives mapped to actions on the other PC (XP). Whenever the Vista PC is started or out of hibernation, or after only a short period of time these discs are not available. Click on the drive in Explorer to display the message "an error occurred during connection [drive letter]: [share name] Microsoft Windows network: the local device name is already in use." This connection has not been restored. »

  If I click on 'Network' within Solution Explorer, the XP PC is not visible. The only way that I can "reconnect" these disks is to go into my anti-virus (Trend) and open the network map. This shows the XP PC and then the shares are available through Explorer - XP PC is still not visible by clicking network however.

  It started only happens in the last two months - cannot locate exactly when, but quite recently. I use connections to store small files and backup critical files a few before nailing the laptop away and it is quite annoying to have to go through this routine every time.

  Any ideas?

  Just in case it helps others - I found that if I make sure that my XP PC has a fixed IP address, and then set up the shares so that they are defined using the IP address and not share names, then I do have more problems - seems like it's something to do with Windows solve the share names rather than something to do with the personal firewall after all.

• I just bought a Windows 7 Edition upgrade Home Premium to professional, but it will not install and told me to get a dfferent key.

  I just bought a Windows 7 Edition upgrade Home Premium to professional, but it will not install and told me to get a dfferent key.

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• I bought a "Windows Vista SP1 Upgrade disc" Wal-Mart and on the accident. I thought it was a full version, but turned out to be upgraded. How can I install this drive to upgrade on my computer if I do not already have an existing operating system?

  I bought a "Windows Vista SP1 Upgrade disc" Wal-Mart and on the accident. I thought it was a full version, but turned out to be upgraded. How can I install this drive to upgrade on my computer if I do not already have an existing operating system?

  You need a disk FULL/license to do a clean install, not an upgrade license.

  Take it back to Wal-Mart and see if you can exchange it.

  See you soon. Mick Murphy - Microsoft partner

• Reinstalled Vista. The windows is genuine, but I don't have the activation code. What should I do?

  I bought the laptop in 2006. The windows is genuine, but I don't have the activation code. What should I do? I installed vista and because I had no code after about 4 weeks it will stop. I'm up, but its prompting me to activate again. Help, please! This has been a good laptop and will continue to be if I can get help with activation.

  Original title: old Dell laptop broke down.

  Hello

  You can contact Dell and ask them to send you a set of recovery disks and to reinstall the operating system.

  They should do this for a small fee.

  If this method has not been destroyed by the last re - install, and if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  With a Dell, you press F8 at startup and follow the instructions

  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?docid=266618

  The methods above resettlement generally do not require allows you to provide a product key during Installation, the recovery process uses the Installation product key factory to activate automatically during the resettlement process.

  See you soon.

• 8.1 Windows "secureboot has not been configured correctly" watermark.

  Hello world! Last night, I've upgraded to windows 8.1. It works perfectly, but there is a watermark on the bottom right corner saying "SecureBoot has not been configured properly to build 9600 ' but as I said otherwise the computer works perfectly. What should I do about it? My computer is HP Pavilion laptop g7 thanks in advance

  A program like Belarc Advisor can be downloaded for free to scan your system and provide the key to the windows registry if necessary, but I don't think it helps in this case.  However, it will show if SecureBoot is enabled or disabled.

  I have a new G7 and updated for Windows 8.1 yesterday and received the same message.  Finally, I fixed the problem by going into settings of UEFI by performing an advanced start.  Once in the BIOS, it appeared that the SecureBoot keys have been corrupted by the update so I refreshed and activated.

  1. go in settings-> laptop-> update settings and Recovery-> Recovery-> Advanced Startup - choose "restart now."

  2. Once restarted, select UEFI firmware settings - then the computer should restart and allow you to select the BIOS updated

  3. in the BIOS, go to system-> Startup Options Configuration

  4. my G7 showed SecureBoot as being disabled.  On the same screen, I selected the option to recharge the HP keys then went back up and allowed SecureBoot (before updating the keys that I was unable to choose SecureBoot).  I selected the F key to save and exit and restart without watermark more.

  Most of this is from memory so I hope that you all can follow and see if it helps your questions as well.  Basically, you will need to get to the BIOS and verify that SecureBoot is on.

• 6000 wireless mouse does not work with error Windows XP "it has not been verified with the Windows XP Logo."

  Original title: Wireless mobile mouse 6000 will not work on XP but when I bought it iwas sure it worked with Windows 7 and Windows XP.
  I bought a mobile wireless mouse from microsoft for more than a year for use on windows 7. When I bought it, I thought that I remembered, it also works with Windows XP, but I can't get the software to complete. I get an error message saying: it has not been verified with the "Windows XP" logo. Is it true, or is there something else wrong.

  Dave

  Hello
  The Wireless mobile mouse 6000 is compatible with Windows XP. I suggest that you download the drivers for the Windows XP operating system from the link provided below and check if the problem persists.

  Mobile Mouse 6000 wireless

  http://www.Microsoft.com/hardware/en-us/p/wireless-mobile-Mouse-6000#support

  You can also get in touch with Microsoft hardware support for assistance.

  http://www.Microsoft.com/hardware/en-us/support/contact-us

• How to uninstall microsoft no product which has not been installed good product is intunemp3 (error windows cannot install acsess)

  I downloaded intunemp3 to get music, but it did not work properly so I tried to uninstall the product and all I get is (error windows cannot install acsess, this can happen if the installation program has not been installed correctly) and as it happened I met other problems which I think may be related to the first problem. When I use my system tools to defragment files, it only that Flash and never starts, when I try to download windows updates they fail.even when I try to run a security scan the sas error McAfee has encountered a problem please click Home and try again. can any body out there help me out?

  Thank you

  Donald

  Try to do a system restore: click on start, all programs, accessories, System Tools, System Restore.  Then choose the restore point from when itunes tried to install.  If this does not work, let me know and I can give you another way to do it.

• iTunes has not been installed correctly. Error 7 (Windows error 126)

  I tried to update itunes and I get the following error. ---------------------------

  iTunes.exe - Unable to locate component
  ---------------------------
  This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix this problem.
  ---------------------------
  Ok
  ---------------------------
  When I try to re - stall get the same error.
  ---------------------------

  iTunes

  ---------------------------

  iTunes has not been installed correctly.  Please reinstall iTunes.

  Error 7 (Windows error 126)

  ---------------------------

  Ok

  ---------------------------
   
  Original title: itunes problem

  Hello

  Uninstall everything according to the instructions from Apple:

  "Remove and reinstall iTunes and the components of the software for Windows 7 and later versions.

  https://support.Apple.com/en-AU/HT204275

  It is also the same list of what to remove what is in the link above from Apple:

  http://pcsupport.about.com/od/findbyerrormessage/a/MSVCR80-DLL-not-found-missing-error.htm

  Or try this program to remove it:

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  Then, download and save the iTunes on the desktop > then right click > select run as administrator to install.

  If the advice already given does not, please contact Apple for assistance.

  "Not to install iTunes or QuickTime for Windows"

  http://support.Apple.com/kb/HT1926

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  See you soon.

• Windows store 'pending' or 'this application has not been installed.

  Original title: WINDOWS 8

  I'm loving WINDOWS PCs since its development. But why s WINDOWS 8 PCproblem?
  
  When I try to download apps that I like,WINDOWS STORE frequently said: "pending" and even if it installs, at the end it says: "this application has not been installed.". "» Now I use DELL INSPIRON ULTRABOOK and I'm having these problems. Even if the laptop is new and attractive, it has nothing to do. DIRE geniune for him solutions please guys! :(

  Hi Akash,

  I understand how frustrating it can be when things do not work as expected.

  1. do you get an error with the error code?

  2 did you follow troubleshooting procedures to resolve this issue?

  3 are you facing this problem with all the apps that you are trying to install?

  You might face this problem if the Windows store cache is damaged.

  Kindly, follow these methods and check if that helps.

  Method 1:
  

  Enter in the right edge of the screen and then click on Search.
  (If you use a mouse, point to the lower right of the screen, move the mouse to the top and then click Find.)

  Enter to execute it in the search box, and then tap or click run.

  Wsreset.exe enter the command run and then press or click OK.

  Method 2:

  Also run the Troubleshooter of Apps. This tool can automatically identify and fix problems with applications and store.

  Method 3:
  We will also try to rename the software distribution folder and check the issue.
  a. press the Windows key + X together, and then click prompt (Admin).
  b. type net stop wuauserv , and then press ENTER.
  c. type softwaredistribution.old c:\windows\SoftwareDistribution to rename and press ENTER.
  d. type net start wuauserv , and then press ENTER.

  Now, try to download apps in Store.

  Let us know if it helps. If the problem persists, we will be happy to help you.
  

• your system has not been modified when installing itunes in my window 10

  your system has not been modified during installation the itunes in my window 10... How to solve

  A step to the solution is to view in iTunes for Windows forum instead of iTunes for Mac.   I would ask that is re - find.

• photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  can I do or just wait for someone to fix it

  photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  is there anything I can do or just wait for someone to fix it?

  If you want any help here, you'll have to tell us what the error message.

  Which report you errors to?

• Firefox has not been started. I downloaded a new. the icon is crossed out. How can I fix?

  March 25, 2011
  I'm on a Mac OS X (power pc)
  After rebooting my computer today. Firefox has not been started. I clicked on the icon, it has begun to initiate and then stopped before that something happened.

  To try to solve the problem, I trashed the application and downloaded a new. He gave me a message: "the Firefox application cannot be launched-10661."

  I retried the download and the second time, the Firefox application icon has been crossed out. It's a circle with a bar slash on it. Same message arrives.

  Sorry, Firefox 4 is not available for Mac PowerPC. You can re - install the previous version from here:
  http://www.Firefox.com/all-older.html

  Or you can find a non-official version of Firefox 4 for PowerPC here: http://www.floodgap.com/software/tenfourfox/

• Bought an ipad at a reseller on ebay but the previous owner of the ipad has not removed its link to ID apple for ipad. How can I remove this link to create my own link ID apple now?

  Hi all

  I'm looking for emergency one-handed helpig on this:

  Bought an ipad at a reseller on ebay but the previous owner of the ipad has not removed its link to ID apple for ipad.

  What should I do to remove this link and create my own link to apple to my account alle ID now?

  Bright ideas?

  Thanks in advance.

  BR,

  Bodo

  Sorry, but the only option is to return the iPad.

• "Windows cannot display the control volume on the taskbar because the Volume control program has not been installed. To install it use Add/Remove programs in Control Panel. »

  missing volume control

  volume control was gone. I tried to go into my control panel to use it, but I get an error that says:

  "Windows cannot display the control volume on the taskbar because the Volume control program has not been installed. To install it use Add/Remove programs in Control Panel. »

  I have lost my Windows XP disc in a move and can't reinstall the file to a disk, how to fix this?

  When you use certain features sounds and Audio devices, you see a message like this:

  Windows cannot display the control of volume on the taskbar because the Volume control program has not been installed. To install it use Add/Remove programs in Control Panel.

  It seems that the c:\windows\system32\sndvol32.exe file is missing.

  This may occur if your antivirus/antimalware application thinks the file is suspicious and quarantines (effectively delete) the file.  You can replace the missing file with a backup copy of the file that is in another folder on your system.

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  Assuming that Windows is installed on your C drive...

  We know that XP keeps copies of critical system files in the following folder:

  c:\Windows\System32\dllcache

  Using the Explorer, search for or navigate to the following folder:

  c:\Windows\System32\dllcache

  Locate the sndvol32.exe file, right-click, choose copy (it copies the file to the Windows Clipboard).

  If your Solution Explorer settings are not set to display file extensions, you will see only a file called 'sndvol32' which has an icon that looks like to the volume control slider (this is the file you need).

  If the file is missing in the dllcache folder, look for a copy of the file in this folder:

  c:\windows\ServicePackFiles\i386

  Browsing from a level in the following folder:

  c:\Windows\System32

  Right-click on an empty area in the window of c:\windows\system32 and choose Paste to paste in the missing file where it belongs.

  Answered in the affirmative if invited to replace the existing file.

  Now try your features sounds and Audio devices.

  Note that run sfc/scannow will not replace the missing file because it is not this that sfc/scannow does.