I can add a hard disk in-house Satellite A300 - 20 p

Similar Questions

• I can add a 2nd HDD on my Satellite A300 - 02c?

  Hi all

  I wonder if it is possible to add a 2nd HDD in my A300 - 02c?
  There is a HDD 2 slot, but no sata connector on the card (see the link to the image).

  http://www.NotebookReview.com/picture.asp?f=36752

  I wonder if it is possible to add the connector (by myself or by the customer service).
  If anyone knows if it is possible and where can I buy the sata connector... Please leave a comment :)

  Adrien.

  I think that there is nothing you can do about it.
  Satellite A300 comes with several different hardware configurations and several different mothers. Really, I don't think that you can add it in addition.

  FYI exact nearest maintainer contact authorized Toshiba and ask for help.

  If anyone has any experience with this stuff then the Toshiba service technicians.

• You can add a hard drive internal on the new 2015 macbook pro

  I would like to know if I can add a hard drive of my macbook pro 15 inch (2015), because I would use the fusion on my hdd and ssd?

  N ° the MBP 15 "has no room for a standard internal drive.

• Can I get Windows XP Home for Satellite A300-19(r) recovery?

  Hello

  I see that WXP drivers are available for my Satellite A300, but can I have a recovery for my Satellite A300-19(r) DVDs? Should I call Toshiba?

  Installation is simple and without error messages. I'm not experienced with installation of WXP and does not install ALL the drivers step by step.

  Thanks for your reply.

  You can order online at:
  https://backupmedia.Toshiba.EU/landing.aspx

• How can I add a hard disk WIN98 in my HP WINDOWS XP (as master and slave, or drive C:\ & D:\?)

  How to install a hard drive that came out a WIN98 and install it in a HP Compaq Home Edition. (Master and slave OR C:\  D:\ ?)

  Thank you please

  George

  Hello

  1. you are trying to attach an internal hard drive?

  You may need to contact the device manufacturer for more information on the physical connection and the BIOS (Basic input output) configuration when you fix the hard disk.

  Note:

  BIOS change / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Once you configure the hard drive in the BIOS, you can consult the links below for more information about how to partition and format a hard disk using the Windows XP Setup program

  http://support.Microsoft.com/kb/313348

  See also:

  How to change drive letter assignments in Windows XP

  http://support.Microsoft.com/kb/307844

• Add copied hard disk (VMDK) on a virtual machine

  I'm new to PowerCLI and can't seem to find information on this "new" process

  I'm looking to automate the addition of a cloned hard disk (VMDK) VM (1) to an another VM (2) existing.  I figured out how "Hard drive copy" VM1 VM2 data store, but can't the formula to VM2.

  To copy the disc, I use the following command:

  $vm1 = "name of vm1.

  $vm2 = "name ofthe virtual machine 2 .

  $ds = "datastor" e

  Get-disk hard - VM $vm1 | Where {$_.} CapacityGB - lt 10} | Copy-hard drive - DestinationPath ' [$ds] vm2 $/ $vm2 - 2.vmdk '-Force

  In fact, here is what it looks like:

  Get-disk hard - VM System1. Where {$_.} CapacityGB - lt 10} | Copy-hard drive - DestinationPath "[NFS2] System2/System2 - 2.vmdk '-Force

  MISTLETOE we do today via vCenter is - change the s parameter > Hardware tab > Add > hard drive > use an existing virtual disk > Browse > check the virtual device node (SCSI 0: (x) - and it works.)  I can start VM2 and the Windows operating system works very well and everyone is happy.

  To set the hard drive via PowerCLI, I use the following command:

  New-disk-hard - VM $vm2 - DiskPath "[$ds] $vm2/vm2 $-2.vmdk»

  In fact, here is what it looks like:

  New- hard drive - VM System2 - DiskPath ' [NFS2] System2/System2-2.vmdk '

  When I run the command, I see vCenter 'work' and then error with Incompatible device support specified for the device '0'.  I have ready many forums reporting the error when you perform a RDM or tries to add a secondary SCSI controller, I don't want to do.

  A few things to note:

  Must be on the default 0 (Virtual LSI Logic SAS) SCSI controller

  Virtual device node must be SCSI 0:2 (it would be a third drive on the system)

  The data store is a different data store that the other disks attached to VM2 (discs 1 and 2 are on NFS1, new drive would be on NFS2).

  When I first copy the disc, it indicates the persistence as unknown, do not know if this is a factor. Any help would be appreciated.

  ESXi, 5.0 Update 1 (5.0.0,821926)

  PowerCLI 5.5 Release 2

  Thank you

  SC

  Lol, I'll type slowly

  No, I'm afraid that we cannot change the API, or the coding behind the cmdlet.

  But we can call the APIs directly from PowerCLI, something like this for example

  function add-HD {  param($VMname, $Filename, $Controller)
  
    $dsName = $Filename.Split(']')[0].TrimStart('[')
  
    $vm = (Get-VM $VMname).ExtensionData  $ds = (Get-Datastore -Name $dsName).ExtensionData
  
    foreach($dev in $vm.config.hardware.device){    if ($dev.deviceInfo.label -eq $Controller){      $CntrlKey = $dev.key    }  }  $Unitnumber = 0  $DevKey = 0
  
    foreach($dev in $vm.config.hardware.device){    if ($dev.controllerKey -eq $CntrlKey){      if ($dev.Unitnumber -gt $Unitnumber){$Unitnumber = $dev.Unitnumber}      if ($dev.key -gt $DevKey) {$DevKey = $dev.key}    }  }
  
    $spec = New-Object VMware.Vim.VirtualMachineConfigSpec  $spec.deviceChange = @()  $spec.deviceChange += New-Object VMware.Vim.VirtualDeviceConfigSpec  $spec.deviceChange[0].device = New-Object VMware.Vim.VirtualDisk  $spec.deviceChange[0].device.backing = New-Object VMware.Vim.VirtualDiskFlatVer2BackingInfo  $spec.deviceChange[0].device.backing.datastore = $ds.MoRef  $spec.deviceChange[0].device.backing.fileName = $Filename  $spec.deviceChange[0].device.backing.diskMode = "independent_persistent"  $spec.deviceChange[0].device.key = $DevKey + 1  ## The UnitNUmber SCSIID 7 is reserved for the Controller - so ignore it and skip to 8.  if ($Unitnumber -eq 6) {$Unitnumber = $Unitnumber + 1}  $spec.deviceChange[0].device.unitnumber = $Unitnumber + 1  $spec.deviceChange[0].device.controllerKey = $CntrlKey  $spec.deviceChange[0].operation = "add"  $vm.ReconfigVM_Task($spec)}
  
  Add-HD -VMname "System2" -FileName "[NFS2] System2/System2-2.vmdk" -Controller "SCSI Controller 0"
  

  I created a function called Add - HD, which will do more or less the same thing, just as the cmdlet New-hard drive when it is used with the name parameter file, but instead to call the cmdlet, the function calls the API ReconfigVM_Task directly.

  The downside of this is that we will have to compile the parameter passed to this method.

  In fact, most of the PowerCLI cmdlets do exactly the same thing, they call the API methods.

  You can view these calls when you draw a cmdlet with the tool of Onyx .

• Add additional hard disk to ESX4.1

  Hello

  I have a box of esx with 500 GB hard drive, I use this to objective test and have 5-6 vm on local storage. Now, I would like a few more storage and plans to add another hard drive to ESX box for making fewer virtual machines. I've not done this before so would like to know if I add an additional hard drive, I'll be able to create another customer vspehere data store? If this is not the case, how can I use the extra space on it?

  Thank you...

  Yes, if the drive is connected to a supported disk controller, t appear in the vSphere Client. What does the Wizard "add storage", it creates a new partition on the drive and it is shaped with the VMFS file system.

  André

• Can I add another HARD drive to my Satellite P200-1EE?

  I have recently just bought a Toshiba Satellite P200-1EE. I can't blame it, it's great having a HD-DVD player, Vista Home Premium, 2 GB of RAM and 160 GB Hard Drive. The only problem is that I'm worried that 160 GB will go very quickly in adding games for Windows Game, being a game up to 16 GB.

  So I wonder, in the model P200 - 1EE, is there a free slot in one of the hard drive bays, and if so, it would be possible to insert a 2.5 "Western Digital Scorpio SATA Drive (WD3200BEV) 320GB in there?
  http://www.wdc.com/en/products/products.asp?driveid=377he on this hard drive details at this page:

  Any help will be greatly appreciated.

  Thank you!

  Say the user manual?
  Please see the user manual that must be preinstalled on your laptop.

  As far as I know not all laptops Satellite P200 would support the second HDD due to lack of second HARD disk controller.
  That's why it of necessary to check the second span for the HARD drive connectors available.

  Remove the second HARD drive Bay cover and the devil if the interface is not available.

• How can I access the hard disk in a satellite A30?

  I just bought a new hard drive and were surprised by the lack of information on the internet with the help to access the hard disk. Help, please. I have the satellite a30-203. Thank you, Daniel Short

  Hello Daniel,.
  location of the HARD drive is down just under the CD-RW/DVD device.

• Merging 2 partitions on a hard disk again on Satellite X 200-21 L

  Ok
  my situation: I bought the Satellite X 200-21 L (European version of the X 205-SLi3) on this point, I have two hard drives with a capacity of 160 GB per disk.
  But among the hard disks is divided into two partitions, the partition "C:" for progra0ms and vista and partition "F:" for what you want.
  The second hard drive D: is normal without a split (160GB).
  But now, my score of the first hardrive (where is saved the programms and viste) is full. Therefore, I want to know, if possible, to unite the two bulkheads again!

  -is it possible?
  -can which program I use? Vista its own program to do this?
  -I only have a recovery CD... so I don't want to lose my data! the hidden for the automatic system recovery partition could be damaged?
  -is only possible to run such a program, which protect my data and unite those partitions without losing something?

  My hard drives:

  File data-system: NTFS
  Hardrive-Capacity: 160 GB (two of them, one is divided into two partitions))
  size: 2.5 Zoll
  Rotation speed: 5400U/min
  Cache memory: 8 MB
  average access time: 11 ms
  port (internal): IDE 40Pin (Ultra DMA/ATA-66)
  MTBF: 600000 hours
  Engine technology: dynamic fluid bearing / RoHS compliant

  THX!

  As far as I know that something like this is possible. You can do the following:

  1. remove all data of D on the second HARD drive
  2. open Computer Management > disk management
  3. click with the right button of the mouse on the D partition, and then choose the option Remove Volume
  4. click with the right button of the mouse on the C partition and select Extend Volume option
  5. simply follow the menu on the screen

  All that s!

• Problem with a hard disk on the Satellite 1800 750

  Hi all!

  I have problems with my Satellite 1800 750 therefore than the hard drive not to be recognized. Means I can start from floppy disk or CD-ROM, but not hard drive. I create in the hard drive to another laptop and it works well. In the BIOS, I see two (HD and CDROM) IDE devices. From pure DOS diskette and try running fdisk also does not show me the HD.
  What can be? It is a total mistake on card mother IDE #1 have a defect or is it a BIOS problem? Or something else?

  Thanks in advance for any ideas.

  Kind regards
  Werner

  Hi Werner,.

  He cannn be your IDE controller has a loose contact.

  But in a first time, you must set the BIOS to the factory settings. Press ESC key after power! Then you have a short list of commands at the bottom of the screen!

  If this does not solve the problem you correctly a hardware fault. This should be checked by a Toshiba Service partner. Go to https://eu.computers.toshiba-europe.com - support & downloads - find an authorized Service partner

  Rudi Bye

• Image of disk HARD recovery removed the Satellite A300 - restore HARD drive

  Hello
  I have a Satellite A300, and I deleted by mistake HDD Recovery folder.

  I have recovery disks, but I want the HDD Recovery folder to restore my system without using the discs.

  Please, can you tell me how to recreate the HDD Recovery folder?

  Thank you very much

  Hello

  Unfortunately, now is not impossible to recover, image of hard drive, but with the only recovery disk. You can copy only to someone who has the same laptop with hard drive recovery record.

  Post edited by: Jeka-HE

• How can I install windows XP on my Satellite A300-129

  Hello

  Since a few days, I bought a Toshiba Satellite A300-129. I am very satisfied with the laptop, although I do not work with Vista, so I prefer the laptop reformat and install Windows XP Professional(32 or 64 bits, dunno yet).

  However I do not know if I have to do something special for him, because it's my first laptop I have and I haven't had that one time a laptop with drivers on a CD. Now I'm spending operating system, I think I need some disk driver for my webcam and stuff like that.

  I hope some1 can help me :)

  Thank you very much

  BTW, I'm Dutch, sorry for my English.

  > And I have a legitimate XP Pro license, but I n t understand what you mean with the things of the sata driver. do you mean that I have to ADD the drivers on the disk with windows XP?

  The point is that your Windows XP CD does not contain the SATA drivers that are needed to recognize the HARD drive during XP installation procedure.
  So, you need to include the SATA driver by pressing the F6 key while installing XP is loading. For this procedure, an external floppy drive unit is necessary.

  If you n t have an external USB FDD drive, then you could create a CD of Win XP and could include the SATA drivers using the free software called nLite.

  A single note; Use the search function of the forums for research on other threads on the nLite and how to create CDs. I remember that there are many discussions in the forum on this topic.

  See you soon

• How can I reinstall my Vista without CD - Satellite A300

  HI :)

  I have a little problem. I forgot to burn a recovery on the CD disc.
  I know that there is a special partition on my hard drive with Vista.

  How can I get there. How can I reinstall my windows as at a time of trees?

  Thank you very much

  I'm waiting for a good feedback!
  Concerning
  longplej2

  My laptop is Toshiba Satellite A300 :)

  Hello

  Do you mean that you want to use HARD drive recovery option?
  If yes then you must press the F8 laptop computer powered on.
  Then choose fix my computer.

  Then a new window will open, here you have to choose the last option called Toshiba Recovery.

  All that s

• Re: Disks update for Satellite A300-1J1

  Hello

  I would replace the internal hard drive in my laptop Satellite A300-1J1. Despite searching the Web from Toshiba sites, I can't know enough information about the specification to ensure that I have to buy a fully compatible disc. I would be grateful if someone can advise the required specifications for the appropriate drives (250 GB and above). Installation instructions are available please?

  Thanks for any help you may be able to give.

  The computer contains a high performance extremely discreet and light, HARD drive.
  HARD drive incorporates the magnetic drive 9.5 mm and 12.5 mm in height and mini-Winchester heads of magnetic type. HARD drive interface complies with Serial ATA.
  The storage capacity supported for your model of laptop are 120, 160, 200, 250, 300, 320, 400 500 GB.

  Just make sure you order SATA HDD.