I can control Gain 6251 USB amplifier!

Hi all

I have USB own 6251, I want to know if the gain of the amplifier (PGIA) can controlled deactivation?

Thanks in advance

MC

Hi nguyenmanhcuong,

In DAQmx, all analog input devices supports the AI. Max/Min properties that Dennis has suggested (which are the minimum and maximum values on the DAQmx create channel VI). These properties are also the sensor scaling into account (and the SCXI terminal block scaling). For example, if you perform a measure of thermocouple... Max/Min are in units of temperature (deg C, deg F, K). If you perform a voltage measurement, I. Max/Min are in volts.

There are also lower-level properties:

  • MIO devices such as USB-6251 box also support lower level AI. Properties of Rng.High/Low, taking no sensor scaling into account. They don't support AI. Gain.
  • Devices like the 4462 DSA NOT supported also the AI of lower level. Rng.High/Low and HAVE. Get the properties. The NOR-DAQmx help file that is located on the start menu, explains in the section named 'win for DSA Devices'.
  • Devices like the SCXI module - 1102 SCXI also support the AI. Well and some blocks to connect SCXI as the SCXI-1313 also support the AI. Attention property.

Since you're using a USB-6251, HAVE. Gain is not supported for your motherboard. Use of I. Max/Min to set the limits of entry (the voltage range you want to measure) and NOR-DAQmx will choose the appropriate hardware parameters. If the range you specified is not available, OR-DAQmx selects a broader range. You can read I. Rng.High/Low what chose the hardware settings OR-DAQmx.

Brad

Tags: NI Hardware

Similar Questions

  • How can I remove my usb writable drive protégé?

    How to remove write protection from my USB on my netbook, I can't erase my USB on my computer.

    Hello
     
    You can remove your usb flash drive write protection using the method below:

    a. open the start menu, in the search bar type regedit, and then press ENTER. The Registry Editor opens.

    b. navigate to the following location:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies

    Note:
    If StorageDevicePolicies registry key does not exist, you must create it manually.
    c. highlight StorageDevicePolicies, and then create a new DWORD called WriteProtect (32-bit).
    In the right window, double-click the registration key and set the value to 0 in the value of d.
    Data area, and then press the OK button
    e. restart your computer and try to copy files to your USB drives.

    Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7

    http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  • How can I get my USB printer doesn't work?

    I am trying to install a Dell 3000cn laser printer in my computer. He started by putting a virtual printer in my control panel that would not print it had nothing on the Hardware tab, under its properties and real hardware was still on the list of unknown devices in the bottom.  I removed both and removed the driver and tried to install the printer before I plugged it in which does the same thing as before so I went into the Device Manager and there was no printer listed. I've uninstalled the usb printer support and removed everything that are associated and tried. Now I get support of usb error has a printer driver problem.

    I tried to support the customer of Dell they got hung up, I tried Windows customer, they want me to pay.
    I've exhausted the research online and can't find 5 people with the same question online all back in 2008 to 2010 which was never resolved.

    How can I get the USB printer to work?

    Generally, printers do not appear in Device Manager.  You will see, however, registrations for "IEEE 1284.4 devices ' or ' IEEE 1284.4 compatible printer" in particular for HP printers.  It is possible that your Dell printer is really a re-badged HP.

    What exactly did you delete when you have uninstalled the "usb printer support '?

    Please provide the full error message text that you do when this error.

    Why do you think you had a 'virtual' printer is installed?

    Click Start, click devices and printers.  What are the items in the category 'printers and faxes '?

    Did you download the driver appropriate for your version of Windows (including 32-bit or 64 - bit) from here--> http://www.dell.com/support/home/us/en/04/product-support/product/dell-3000cn/drivers?

    Did you follow these installation instructions:

    Download

    1. click on the link download now to download the file.
    2. when the file download window appears, click Save to save the file to your hard drive.

    Extract the files
    1. navigate to the location where you downloaded the file, and then double-click the file to decompress the download package
    2. click on continue.
    3 specify the location where to unzip the files.
    4. click on the OK button to extract the files.
    Once the file extracts the message all files have been unzipped will appear.
    5. click on the OK button to exit the installation program.
    6. go to the Start button.
    7. go to settings, click Printers.
    8. Select Add a printer.
    9. follow the instructions to set up your printer.
    10. Select Have disk and point to the location where the drivers were extracted.

    Install the printer driver:

    1. install the printer driver using Add Printer method.
    2 follow the instructions that appear in the Add Printer Wizard dialog box to install the printer driver on your computer.

  • I can't use my USB because of administration system or blocking USB problem.

    Because of my ignorance in the use of some security as USB security guard software and changes in my control panel, now I can't access my USB drive or any external memory device. When I put any external memory via USB device, it is noticed that my USB guard is locked and that the system cannot perform it.so contact your system administrator. But I uninstalled all my software security completely and checked my boot settings and the bios and the problem is still there. so I can't use my USB or external memory device via USB port in my laptop. I use the Windows 7 operating system. so please help me through your friendly consultation.

    Two thoughts. Take a look at this program and see if it finds the remains of security software http://www.revouninstaller.com/ and also to see what runs in your startup using this program.
    Autoruns from Sysinternals

    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

    I hope this helps.

  • Can I use a USB on an iPad Pro?

    I am looking for an iPad 12.9 pro with a memory of 128 GB. Also obtain loghning usb and keyboard. My question is this: can I use a USB stick with this for transfer autour files?

    For example: I'm starting a word on a desktop document, except at thumb drive and want to continue to work with the iPad Pro. Can I transfer the file to the iPad to change, resave the said folder and then go back on the desk with her?

    Could also transfer other files with this set autour upward?

    I need solutions for mobility and stationery and was looking to use it for small, things go, then an iMac for the intensive stuff.

    My idea would work out?  Thank you for your time and your help.

    You can use the portable hard drives Seagate/Western Digital Wireless

    OR

    These are your only alternatives for of SanDisk USB flash drives.

    https://www.SanDisk.com/home/mobile-device-storage/ixpand

    https://www.SanDisk.com/home/mobile-device-storage/connect-wireless-stick

    Good luck!

  • I can control my Apple music through the Apple Remote app on my iPhone and iPad?

    I can control my reading of Apple's music using the Apple Remote app on my iPhone and iPad?

    Yes, read this article on the basis of knowledge of Apple on how to do...

    12 iTunes for Mac: use the Remote app to control your iTunes library

  • Photosmart HP 6510 - can't find the USB port to connect to the computer. It is right in front of my face?

    Photosmart IHP 6510 - can't find the USB port to connect to the computer. It is right in front of my face? I can't find a diagram online. do not have wireless capability. With the help of MacPro with Snowleopard.Thanks.

    Hello

    The usb port is not #22. as seen in the picture. It's in the back of the printer on the side right hiand.

    Best regards

    ERICO

  • Satellite A300-243 - can I choose the USB key you want to start?

    Hello
    I need an update for my laptop.

    That is the problem. I want to boot from a flash drive and I want to save my data on another USB HDD.
    All other laptops (even mini books) is an option that you can choose when you need 2 or more USB key when starting, that USB drive you want to start.

    When I put 2 key USB to PC and push button start options, see a single USB boot option. I want to see them all.

    Please help me get rid of this.
    Thank you.

    PC: A300-243
    BIOS: 1.90-3/20/2009

    Hello

    I think that's not possible.

    As far as I know there is that only one option is supported by the BIOS (last option called USB memory)
    You need to know that the different BIOS supports various functions and BIOS located on the A300 contains the option only to a USB key.

    So you can use just a USB key to start.

    Welcome them

  • Can I have simultaneous USB and LAN for IX4 connections - 300 d?

    Can you have a USB to PC connection and a connection to the local network (ethernet) at the same time?

    I have not gigabit LAN (yet) and I have a few files that I need to transfer a PC, so I thought using USB 2.0 (not 3.0 yet) would be faster. So, I would just periodically connect the IX4 to PC via the USB port while it is still connected to the local network. Are there problems with it?

    ix4s USB ports are for drives external, printer or connections UPS only (ix4 ports are host ports) and not for connecting another host (customer e.g.PC).

    No luck...

  • How can I add a USB host controller high-speed to my PC?

    My OS is windows xp home edition. I get this message that the HI-SPEED device attached to Non HI-SPEED USB Hub.

    The USB Composite device is a USB HI-SPEED device and will function at reduced speed when plugged into a port not HI-SPEED.

    There is no host controller USB HI-SPEED installed on this computer.

    Recommendation: You add a USB host controller high-speed on this computer in order to get maximum performance.

    So, how can I add this USB host controller high-speed to my PC? Is - this material I must add and physically install to my PC?

    As always, any help is greatly appreciated.

    Thank you!

    drake68

    Hi Drake,

    Review the devices USB connected to your PC and make sure that there is not a USB 1.x device connected to the same USB HUB (front or rear).  USB 1.x devices will cause the USB HUB at the bottom shift to 1.x speeds.

    You have an old PC (2002), it is possible that your PC does not have a USB HUB 2.0.  In this case, you need to install a USB PCI adapter card.

  • Can the Format date/timestring service that can control the execution of the loop to a VI?

    Can the Format date/timestring service that can control the execution of the loop to a VI?

    Example,

    a VI is running at August 25, 2010 and print a txtdata(3)) '100825.

    Then follow when time system running at 2359hrs, August 25, 2010 at 0000hrs, August 26, 2010.

    and print a txtdata(3)) '100826.

    How?

    When the system changes a new date, problems occur.


  • I have a wireless optical mouse and I can't remove the usb of my laptop Gateway receiver. It is stuck there. How to get out?

    I have a wireless optical mouse and I can't remove the usb of my laptop Gateway receiver. It is stuck there. How to get out?

    Hello

    The unit just has USB slide out. If it is stuck, consult with a real computer store (the one that makes
    his own service in the House and not leeks and glances at a Best Buy or other stores) or gateway
    supported.

    Gateway drivers and downloads
    http://support.gateway.com/support/drivers/dlcenter.asp

    Technical support Gateway
    http://support.gateway.com/support/?cmpid=topNav

    Door Documents
    http://support.gateway.com/support/SUPINFO/index.asp?cmpid=topNav

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Can I use two USB 6211 to replace a USB-6009

    Hello

    I got a labview vi., 5 output channels digital, 2-channel digital input, 2 analog inputs are necessary for the execution of this vi.  Initially a 6009 usb is used to run the vi. But I have only two usb ports 6211 now, which has digital to digital for each data acquisition 4 inputs and 4 outputs. I wonder, can I use two usb 6211 to run the vi. ? What should I do?

    Reverse lines are wrong, does that mean it will display 0 for false and 5 V 1.

    Active drive is the normal mode of the digital output: it generates tension when said.

    I forgot one thing: that you are behind the wheel of these lines, how much power do you need?

    Analog output is less powerful, it can give only 2-4 mA, while the digital output 6009 could give 8 my.

  • MG3100 scanner - can control digital rights on the release of pdf to allow comments?

    MG3100 scanner - can control digital rights on the release of pdf to allow comments?

    Hi fassettj,

    Allowing comments on PDFs created with your PIXMA MG3100 is not supported by using the software provided with your printer.  For these features, it is recommended that the recommended more complete PDF creation is used, such as Adobe Acrobat.  For more information, please use the following link:

    http://www.Adobe.com/products/acrobatstandard.html

  • Iso file of windows xp can directly be installed USB on a formatted hard drive?

    Iso file of windows xp can directly be installed USB on a formatted hard drive?

    Not directly.

    There is a SMALL chance that if your hardware supports it (unfortunately never say you anything on your PC or BIOS), you can boot from a USB stick or an optical drive and install Windows XP like this.
    But it is unlikely.
    In addition, tell us what you mean by 'windows xp iso file. This is very vague, and we do not know what you are talking about.
    Finally, if you want to ask questions here, really read the answers and recognize them in some way. Here is a link to your other thread:

Maybe you are looking for