I can help with some scenes

Similar Questions

• Hello good I would like to cancel the annual plan of adobe audition, because I had problems with the software and the Bank, if I can help with this please.

  Hello good I would like to cancel the annual plan of adobe audition,

  As I have had problems with the software and the Bank, if I can help with that please.

  Please contact customer support for cancellation & refund of the next purchase. Contact the customer service

  Creative single-app cloud membership for Adobe Audition (one year)

  Subscription Office

  March 11, 2015

  In the case of any questions, please let us know, I can certainly go for you.

  Concerning

  Baudier

• I need help with some Applescript for Postbox

  I was wondering if any of you can help me?

  I am writing a very simple script for my Postbox email application. It takes the selected message and turns it into a reminder. Everything works fine, but I want to take the subject assigned to the message and use it as the name of the callback list, and that's where it breaks down (topics are tags, as in Thunderbird and Mail).

  According to the dictionary, a message object counts among its subjects msg properties which is a list of subjects. According to the dictionary, a subject has three properties so, id, name , and color.

  I need only the first topic, so I do something like

  set theTopics to msg topics of theMessage.
  set theTopic to item 1 of theTopics

  no error reported, it returns a list, but when I then try to access the properties of the first article (= first subject), it is clear that something is wrong, and I think it's a bug/bad programming in the mailbox, but I'm not sure.

  When I do something like

  set ReminderList to name of theTopic

  He begins to complain. It is said that name (or id or color) is not available, as I can't get this to other classes, and it does not even return the class type for the element.

  It will return something that looks like this:

  class {show id "some topic"}

  no name for the class.

  And it seems that the text, but it behaves differently.

  How can I know what I'm actually deal with this object "topic"?

  What is - this actually to return?

  I don't know the app, but try to go back to theTopic properties.  That could make things a little clearer.

• Help with some PL/SQL triggers

  Hello, I'm totally new using PL/SQL, so I need your help with two triggers.
  For example
  1 compare two dates and check that there are different, you must send an error message
  
  2. when I insert a new record, a trigger must get data from other tables and Add (on a new record)
  
  Maybe not the answers, perhaps the way forward!
  Thks!

  Insert values into a new record of existing data tables

  This thing that you can do with simple sql statements as

  insert into table_name1 select column_name from table_name2;
  

  For example: -.

  create table test(id number(10));
  
  Table created.
  
  insert into test select empno from emp;
  
  14 row(s) inserted.
  
  select * from test;
  
  ID
  7839
  7698
  7782
  7566
  7788
  7902
  7369
  7499
  7521
  7654
  

  Thank you

  Mezaber

• help with some floats

  Hello again! Happy birthday Maes.

  Always confused with some floats... Here is a screenshot

  

  and the css

  .headingbox {
         clear:both;
         height:26px;
  }
  
  .floatright {
          float:right;
          margin-right:20px;
          color:#ffffff;
  }
  
  .floatleft {
          float:left;
          width:350px;
  }
  

  the headingbox class is the above paragraph and contains the floatleft and floatright. The problem here is that paragraph sticks left .floatleft. I want the point to always be below it. This will work with a greater height, but when there is little text in the .alingleft there is just too much space between the post title and paragraph.

  Is there an easy fix for this?

  http://www.martcol.co.UK/test/floathelp.html

  is this something like what you're trying to do?

  It's a bit awkward and I'm afraid, I used my own code, but if it helps, it's really simple.  Using any other code for me, it's like wearing shoes of someone else...

  Martin

• Need help with some cluster power shell scripts

  Guys,

  I need help with 2 scripts.

  Text 1.

  I need a power shell script that will get all the virtual machine in a specific cluster.  Virtual machine names as well as the number of processors, output allocated RAM and size of CSV file.

  Text 2.

  I need a script that will get all data warehouses in a specific cluster and store name data as well as the amounf of free space for a CSV output.

  Thanks in advance guys.

  Greetings, @peter79 -.

  For the first part:

  Get-Cluster myClusterName | Get-VM | Select-Object Name, MemoryMB, NumCpu | Export-Csv -NoTypeInformation c:\temp\myVMInfo.csv
  

  And for the second, how about:

  Get-Cluster myClusterName | Get-VMHost | Get-Random | Get-Datastore | Select-Object name, FreeSpaceMB, CapacityMB | Export-Csv -NoTypeInformation c:\temp\myDaterstoreInfo.csv
  

  The first would be quite a bit faster by using Get - view instead of Get - VM.  It would be like:

  ## get an array of VM View objects with just the desired/needed properties
  $arrVMViews = Get-View -ViewType VirtualMachine -SearchRoot (Get-Cluster myClusterName).MoRef -Property Config.Hardware,Name
  ## make the two filters for displaying the desired info
  $hshCPUCountFilter = @{n="NumCPUs"; e={$_.Config.Hardware.NumCPU}}
  $hshMemAmtFilter = @{n="MemoryMB"; e={$_.Config.Hardware.MemoryMB}}
  ## display the info, and export to CSV
  $arrVMViews | Select-Object name, $hshCPUCountFilter, $hshMemAmtFilter | Export-Csv -NoTypeInformation c:\temp\myVMInfo.csv
  

  Enjoy.

• Smartphones blackBerry maybe some fix simple since the last OS upgrade you can help with?

  First of all, as I do scroll up and down, it's an annoying rattling noise, he was not used to. How to disable that?

  Secondly, I get the error now "there are insufficient network coverage for your request. Please try again later. "I checked all my settings.  My Mobile network connection is on. I show enough network connection on the icon in the upper right corner.  What gives?

  You said that you just did an upgrade of the OS. Was - it OTA it? Were there errors? Try to pull the battery and leave for a few minutes, then put it again. See if the problem goes away. If the problem does not go away, call Rogers.

• If anyone can help with the decision-making of a virus on my computer?

  The virus comes from facebook and he's trying to make me activate defender internet windows. I use McAfee, and it detects no viruses. It is, of course, come by the defender of the internet.

  Hello

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER THAT you are sure that the machine is clean of any malware.

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

• Help with some internal specs on the STORM. May require a person who works at the RIM.

  BB STORM, JDE 4.7.0

  I was usually the champion of the size of the memory, and I thought I got it down pat, but it turns out that I see different values in some disassembly of the hardware of the storm.

  Can someone help me to y and the degradation of persistent memory Vs file in the permanent internal flash storage area.

  OK, here's what I thought, it was internal so far.

  1 internal 128 MB of RAM for running the show, allocation of memory, etc, etc...

  2. 1 g internal Samsung OneNAND flash memory. It is divided into 128M of space of the App and 872 M of storage space.

  The storage space is divided into persistent storage and the rest is an internal file system.

  3. Finally, there is 8GBits of the space of the SD card.

  OK, here's my new questions on memory.

  In 2 above, is the 1 G bytes or Bits. I used to think bytes, but teardowns latest I read all say Bits. If so, it means that we have memory app 16MBytes! So the question is byte or bit?

  The next question is the 872M (bits or bytes)... How is burglarized persistent store file Vs space. Is it preallocated or no change of line based on what he gets used? If it is fixed, can the line be forced to the persistent store. Can it be forced into space from the SD card?

  Finally, is again the SD card in bytes or Bits? I suspect the pieces, but I don't know about you. I don't know what MoviNAND.

  Note that if you are new to this, please don't answer, I'm not new, and I went through all the usual web sites. I just want to hear from those who know with certainty because they actually measured it with a code or they talked to someone on the EDGE. I heard all the 'I think there' and they do me good. I actually send you this email to myself and several other people. Many of us need answers to these questions.

  Thank you

  -Donald

  The BlackBerry Storm has the following:

  • 128 MB of RAM
  • 128 MB of Flash memory for installation of the application (file COD) and store persistent store.
  • 1 GB internal memory for storing files (FileConnection & USB stick as support).
  • Support for micro SD card up to 32 GB * of size for the storage of additional files (FileConnection & USB stick as support).

  All values are in bytes, not horseshoes.  It is not possible to install applications on memory storage of files, nor is it possible to store persistent objects in the file storage space.

• If anyone can help with a report that retrieves the external ID field in the CRM

  I have an affiliate system where the customer imported 3600 + recordings, some of which were to the eternal ID ("field of your identification on the import file) together and some are not.

  The problem is that I have to update all of the CRM records and impossible to import the changes that I don't know what the original external id value. Catalyst support of business savvy that they can't include this field in a report (don't get started me on that...) and I'm now desperately need a way to get that data on the file and are essential for any news updates via the import of files. I would like to delete all files and start again except that there is no wholesale don't delete option in CRM BC - Yes you can do it in the products but not the CRM or Web Apps...! The only option available in British Colombia is to remove a list of screen at once, but then I have the problem that this issue is not all CRM records - only those whio belong to a secure area.

  My need is urgent, so any free help or otherwise would be approeciated and the solution must be one that allows me to run such export on an irregular basis.

  OK... Thanks to those who feel now offered help and I have a little a goose, but then isn't quite.

  Colombia-British in his usual style of the help documentation, are quite clear in their explanation of the way in which the Unique Id (which is actually the ID ' external ' e CRM under the Misc section). Here is the description from the import of the model

  • Columns of the foregoing represent all the available columns that can be imported using the import of standard contact feature. The columns do not need to contain information, but they must be present on the page, especially if a column instance contains information.
    
  • If your organization uses its own unique ID to differentiate customers, then use the ID column of your. If a value is present in this column, it will serve the unique identifier. This means that if the contact has been imported previously, and is to be re-imported then its details are updated, if not a new contact record is created regardless of the fact that contact a similar already exists in the system.
    
  • If the ID column of your unused, while contacts are usually identified by their email address. The minimum requirement for import a contact into the system that is to be your ID, Email address, full name, first name or last name must be on a single line. If these values are missing the line is not imported and import will move to the next line.
    
  • If you do not provide your ID or an email address and only a name then the contact is added every time regardless of the question of whether a similar already exists in the system.

  Now my understanding is that if you used the Id of your then being the unique identifier, and that these imports all future would have to use that... Well no, that is not the case at all.

  If you import a recordset using your Id, you can simply update these same records with just the email address - you don't need your Id or external at all!  So, what's the purpose of this field at all? I have no idea myself because he cannot be reported, may not be exported, it cannot be referenced - actually the only way you will see she is to open the CRM folder and view details of Misc and buried at the bottom you'll find. That's what I call a undocumented feature!

  So end of this is - my concerns that whatever proved unfounded and you don't have to worry about external / your field Id, no matter what the customer does.

  My advice - forget this field exists and do not care to use it unless you might happen to be interfacing in some 3rd party system through PAI, as seems to be the only use I can think of for it.

• Card memory blackBerry Smartphones can help with problem memory curve?

  I had (apparently common on this forum) problems with memory on my blackberry curve 8310.  I use Missing Sync MarkSpace software to synchronize with my macbook.  The software works very well, but he has to use too much memory.  I added a memory card hoping that it would help this problem... but the map does not appear to be used.  I have no more than two or three rings and a few photos.  I think that the software and my contacts/calendar to take up space.  I can't load this kind of applications or data on the card?  How? Is it possible to increase the memory that works?

  No, you cannot load or run the press card applications.

  What you can do:

  Read this: http://www.blackberryforums.com/general-blackberry-discussion/116396-managing-your-bb-memory-lost-ca...

  And this: http://www.blackberryforums.com/general-blackberry-discussion/112029-losing-call-logs-sms-emails-opt...

  Other links to read:
  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB15345&sliceId=SAL_Pub...
  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB14320&sliceId=SAL_Pub...
  http://www.BlackBerry.com/BTSC/dynamickc.do?externalId=KB14213&sliceId=SAL_Public&command=show&forwa...

• If anyone can help with MRS implemented

  Hello

  I'm trying to implement a SRM 5.5 environment and I'm having some problems:

  The production site is set up with VC and SRM installed and worked.

  When I connect now although I can't connect to the VC. (this is a timeout error and I have reset the timeout in the registry so that this problem can be solved)

  On the production site, I installed the VC and SRM.

  But trying to start VC once again, I get the attached error and event log indicates the error.

  Another problem is that after installing SRM on the reocvery site, I can't download and install SRM of the plug in Manager.

  The error states that "he cannot connect to the vsphere client.

  Any ideas on this would be appreciated.

  Patsfan

  Hello

  On the first problem, it seems that vCenter cannot connect to its database and therefore cannot start. Things to check:

  1. have you installed VC and SRM on the same machine

  2. have you created a separate for MRS database if you use a shared database server?

  Stefan

• If anyone can help with answers to basic on the first 12 items

  I used Premiere Elements in the past (up to the first 9 Elements) but only once a year to edit the video of last year my grandchildren. The change is now that I use a Panasonic SC-V520 and have been shooting in 1080 50 p. First Elements 9 does not support this format I think.

  My questions are:

  1 box of first Elements 12 import and edit this format?

  If the answer is Yes to question 1, can 2 I mix old images of my old Sony camcorder with this newest film for editing in Premiere Elements?

  3 can I then convert them to a Blu Ray disc to play on my reader DVD or a regular DVD disc to play on older DVD player which is not compatible to blu ray?

  4 I am wasting my time in recording in 1080 50 p and should I rather save new images in a different format.

  Thanks for any help you can give me.

  1 Yes

  2. Yes

  3 DVD players n ° cannot play BluRay discs - even if they are burned to a DVD disc.

  4 1080p50 is a perfectly legitimate way for shooting, especially if you're shooting with a lot of action because he has the real images of double 1080i50. However, your output video may or may not actually be frames at 50 p (or even 1920 x 1080), depends on what form of media you are published. BluRay than Premiere Elements output files, for example are 50i.

• Please help with some simple AS2

  Hello

  I have a puzzle that I adapted in AS2. It is perfect for my needs, with one exception. It has a 'Start' button that erases the image of the puzzle, so you can start to assemble. I don't need the 'Start' button and am currently placing the script from the 'Start' button in the timeline, so that the picture of the completed puzzle is automatically cleared, ready to start assembling the four parts. The code original source from headache and Tunis is located here:

  http://www.ActionScript.org/resources/articles/13/1/jigsaw-puzzle/Page1.html

  This is the script that is currently on the button:

  We (Release)

  {

  for (i = 1; i < = n; i ++)

  {

  ["p" + i] this.joined_mc ._visible = false;

  }

  }

  and the button is inside a clip on the main stage.

  Please can someone help me on this point - would be really grateful!

  Thank you

  Ed.

  If it's a simple button (not a movieclip button) and attach the button containing the chronology:

  for (i = 1; i<>

  {

  ["P" + i] this.joined_mc ._visible = false;

  }

• Need help with some oracle basics

  Hi friends,
  
  I would like to know if my abt to understand some concepts as described below is just?
  
  1) active user : when a user issues a command SQL to oracle to perform.
  
  (2) * user inactive: * when oracle wait for users to issue commands and the user is INACTIVE.
  
  
  Please help me to find these answers:
  
  A user become active when they click submit button/backup/restore?
  
  I would like to know how much resources a user oracle uses (network traffic, memory, I / O)?
  
  Is a user uses some resources if it is inactive and sitting idle for long time?
  
  
  
  Thank you

  Oracle marks a session as a session inactive if the user will not do anything with the database for some time. I don't know what is the explanation for the status of the session that you see a toad, since I do not use it. Maybe someone else would have a better explanation then wait for others to participate.

  Aman...