I can no longer install Palm Desktop on a reformatted computer.

Similar Questions

• Sync Palm TX with Palm Desktop on the new computer laptop

  Hello

  I use a Palm TX and have been timing it (via wifi) with Palm Desktop installed on my laptop for several years, with the help of you all.  I have a new Dell laptop, running Windows 10 and I would do the same thing on this one if possible.  I downloaded and installed Palm Desktop 6.2 for the new laptop and it asks me to synchronize my device.  So I attached the cable (thought I start with this and get the wifi part will later) and press the hotsync button.  The device will attempt to connect, but I get the message "connection could not be established... '. Check your configuration and try again. »

  Any ideas?

  Thank you

  Harry

  I think I have the ability to HotSync via a cable is a good choice.  Aceeca for Vista and W7 and W8 files should work for W10 also.

  I also have a file at the beginning of the list of Wifi HotSync.  Go through it and see if you can get it to work with your laptop.

  WyreNut

• Problems installing PALM Desktop on XP

  I recently bought a PALM TX to replace a Tungston T.  After a few minor problems, it installs successfully on my work laptop.  Then I tried to install it on my desktop (XP Home) home PC and have experienced significant problems.  Following the Start Here guide I plug my TX before I loaded the software, but the system gave me "unrecognized USB device" constantly.  I started the installation of office, but after a few screens (download far from over), he fails a reboot (I tried this twice).  I disconnected the TX and restarted the installation and it went in the right order.  Computer has expired when I arrived at the stage of 'Synchronization device', I connected the TX and the "unrecognized USB device" came again and when I hit the 'sync' button nothing happened.  In addition, I noticed that the Hot Sync icon installed in the right hand bottom of the screen as it was supposed to.

  I uninstalled the software and tried to restart, reinstall, and even tried to install it from the downloads on the PALM page, including an option 'repair' installation problems.  Nothing works.  And of course it is there nothing on the PALM page: installation problems or even a way to the problem of PALM support by e-mail.

  Is it possible to get this figured out?

  Well, the OS is XP Home.  OK so here's the solution I guess... After trying various scenarios that did not work, I tried just not worth trying to get the new Palm Desktop to work with my TX.  So I unplugged the sync cable.  It is then that I noticed that I had plugged the new sync cable into the USB port to which my old cradle used.  This USB was one that came with my system that is about 4 or 5 years (I think it is called Technology USB 1).  However, I have also a new USB 2 card in my system so I decided to give that a try... and it worked.  The system immediately recognized the new TX and everything worked fine after that.  So I guess the lesson here is that the newest Palm requires the latest USB technology even if I've seen that in any of the documents.

  And thanks to those who tried to help me with this problem.  It's really appreciated.

  Message relates to: Palm TX

• HotSync installation fails when installing Palm Desktop 6.2

  My hard drive crashed, so I need to reinstall Palm Desktop on my Windows XP computer.  When I install Desktop 6.2, the component of HotSync never installs correctly.  Have others run into that?  Is there a fix out there, outside installation 4.1.4e instead?

  First question: is the device that your help really Palm m125?

  Here's the info from Palm.com

  Palm Desktop 4.1.4 and HotSync Manager (Windows) http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=37014

• Impossible to install Palm desktop on OSX 10.5.7

  Please help me!

  I have just download the last palm for OSX 10.5 office xxx and it will not be installed.

  It seems to go fine until that all last and is then says it cannot install, what I want to do it again and the result is always the same error.

  I downloaded the file 2 times and the installation fails, in the same way, every time.

  I am running OSX 10.5.7 running on a Mac mini in 2009 with 4 GB of RAM.

  Thanks in advance,

  Chuck, Chico, California

  What version of Palm Desktop you trying to install?

• How can I re - install Windows XP on a Compaq computer laptop that I bought? The original owner has Linux Ubuntu top.

  my computer Compaq 6200, came with Ubuntu... I have windows... I don't understand the Ubuntu system

  Hello

  After you install a different OS (Ubuntu) on a HP (Compaq), you will have no recovery Partition to reinstall Vista from; HP says that.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703

  'A problem of common recovery. .

  If the original operating system is changed to a non - Vista OS, the Recovery Manager cannot be launched either office or by pressing f11 at startup. You can use the recovery disk to restore the computer to the original state of Vista. If you are using a non - Vista OS, you can use a third-party partition management program to recover hard disk space. »
   

  Contact HP and ask them to send you a set of Vista recovery disc, what they will do for a small fee.

  "Order of the recovery disc for Windows 7, Vista or XP.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00810334&LC=en&cc=us&DLC=en&product=18703

  See you soon.

• Can no longer access the connect you on THIS computer

  I can acess my router from all my other except machines to it. This is the machine that I use all the time and I was able to access my router before. He just suddenly stopped being able to access the connection. He not even me to use engineering to access settings. I stop firewall, disabled virus protection. Who were always activated before and I was able to access it. so, not sure what is happening.

  Had to uninstall Kaspersky and reinstall and everything started to work properly again.

• can I re install acrobat xpro as my old computer with her on has ceased to exist

  my old computer died and I want to re install acrobat xpro I had bought and used for this topic?

  Hello Stephen,

  Please visit: https://helpx.adobe.com/acrobat/kb/acrobat-downloads.html

  For activation and deactivation, see: Activation and deactivation of troubleshooting

  I hope this helps.

  Concerning

  Megha Rawat

• How can I re - install Photoshop Elements after I reformatted my hard drive?

  I have hard to run windows repair on my computer because I got the virus and all my programes. Is it possible to use again my license number?

  You can open any Adobe application, and then click 'Disable' to the Menu option help, once yuou disable you can re - use the serial number.

• Centro desktop doesn't install it to the previous thread palm desktop and cannot uninstall old version

  The Centro CD installs access desktop Palm Centro
  desktop computer - it stops and says that I have to uninstall existing Palm desktop as it will not be to level the previous version.

  Problem is, I can't install off Sony palm desktop. It's in c:\program
  files, but not displayed in Control Panel / Add Remove prgrams. has no
  allow revo uninstall it.

  I tried to plug just in the Centro but windows might find usb drivers
  (no doubt)

  So I'm a little stuck. Help!

  It was the next step.

  I just needed to know what was the operating system of the PC and the version of Palm desktop so I could tell you where to get the correct files.

  Here is some info. For you.

  Click on the following link to the support page for your device on the kb.palm.com Web page.
  http://www.Palm.com/us/support/Centro/centro_gsm/

  There are links on the page the user Troubleshooting Guide, how to, downloads, etc.

  The best way to protect your data is to export the data in each category of Palm Desktop in a separate folder on your PC.

  Create a new folder on your PC somewhere that suits. Name it something like Palm Desktop data. Click on the link below and follow the instructions on this page for the export procedure.

  http://www.Palm.com/cgi-bin/cso_kbURL.cgi?id=28734

  Make sure you only select everything for the beach in the export window.

  With the data stored in the created folder, make a copy of this file and save it on a USB key, cd - rw or external hard drive.

  Whenever you change in Palm Desktop, export the data that has been changed in this file and save again to external media.

  With this process you can always import the data in Palm Desktop, whenever you have a problem with the data in Palm Desktop, or if your computer/hard drive/device crash.

  Message relates to: Palm i705

• «.. . Wizard was interrupted before Palm desktop by access could be completely installed. »

  When I try to install Palm Desktop 6.2 by running PalmDesktopWin62.exe everything seems to be okay until the 'configuration register.  Then I get a Microsoft Windows message that says: «...» "The wizard was interrupted before Palm desktop by access could be completely installed." ...".  Then the installation stops and installation is not the case.

  If it's important I use Windows Vista Home Premium.  And until I tried installing, I: uninstalled my previous versions of Palm Desktop by using the uninstall feature from the CD installation disc, disabled my antivirus, stop Windows Defender and set the compatibility mode of PalmDesktopWin62.exe to the option "Windows XP (Service Pack 2).

  Someone knows how to fix this?

  Have you tried running just 'normally '?  Disable your AntiVirus software temporarily during installation?

  At this point, you may need to do a "clean uninstall" and some changes of registry before trying again:

  http://forums.Palm.com/Palm/board/message?board.ID=windows_hotsync&thread.ID=43307&jump=true

  WyreNut

• USNG a Treo 650 can I switch bewteen outlook and Palm desktop and other issues

  I can't switch between Palm desktop version 6.2.2 and prospects to see what I like without losing any data?  If I can't spend using the Outlook on Ver 6.2.2 duct synchronize my Treo 650 in Outlook 2002. I may eventually go to a Blackberry tour and I would need to have the info in outlook to convert to worm Blackbery Desktop 4.7 (I think) the following problem is I have Palm Ver 4.1 on my Win XP Pro laptop in another country

  The treo with Outlook synchronization causes any changes to your handheld? I wonder if I'm having problems when I have to convert the Office Palm worm 4.x.x info on Xp desktop Blackberry 4.7 on my other computer?  I don't know if Palm ver 4.1.1 must be a conduit of outlook. I may have to upgrade to version 4.1.1E to accomplish this and I don't know if this version works on XP?

  The key is that I have to convert Palm desktop (2 different versions in outlook 2002 and synchronize properly)

  and hopefully maitain this info until I return to Europe and load it into my XP computer

  Thank you

  Bravo! Thank you!

  Palm Desktop 6.2 is compatible with XP... And you can synchronize the two programs at the same time without any problems. What you need to do is simply click on the sync led PIM to synchronize with outlook or Palm desktop.  Start > programs > Palm > sync led PIM >

• Palm Desktop 6.2.2: Palm Desktop 6.2.2 with Windows 10

  What is someone having the same problem:

  I installed Palm Desktop 6.2.2 on my Windows 10 system, sync'd and everything worked fine for about 30 days approximately.  The other day I started my computer, went to Palm Desktop and found all the files (in the left panel) disappeared EXCEPT media and install it.   I uninstalled and reinstalled several times (from sources stored and newly downloaded) and still have the same problem.

  Since the installation of Windows 10 I found Microsoft seeks to establish, it's default applications with a few applications (a real fight with MS / Chrome and MS / Adobe PDF).

  At that time, the folder that I can sync's Photo.   All other folders appear sync, but do not appear in the left vertical navigation bar.

  Everyone knows the same problem?

  Comments are welcome.

  Note:

  Hello and welcome to the HP support community!

  The search function is your friend!

  See this link:

  http://h30434.www3.HP.com/T5/Palm-and-WebOS/Palm-Desktop-6-2-2-win-8-shows-media-and-install-try-this/m-p/3535173/thread-ID/98892

  WyreNut

• Palm Desktop 6.2.2 Windows 8 missing modules after the update to version 4.1.4

  After installing Palm Desktop 6.2.2 version 4.1.4 on my laptop to Windows 8 for use with my Palm Tungsten E2, I now only 4 modules... Fees, Note Pad, media and install. Where have calendar, addresses, etc., disappear to?

  Version 7.0.2 HotSync Manager also offers, USB, network and series, but NOT the Bluetooth in connection settings. I use an IVT BlueSoleil Bluetooth adapter and their driver/software version 8.0.395.0, which works very well with anything else.

  GoneFishin6, I suggest you clean uninstall/reinstall Palm Desktop.

  Your question is the first I've heard of.  Others report success with Win8.

  These instructions are for Vista, but should work for Win8.

  You first need to you a copy of your data to have just in case something happens. You can find your data files by clicking on start-> Documents-> Palm OS Desktop. Highlight your Palm Desktop user name and right click and copy. Then go to the desktop of your PC, click on a blank spot block and select.
  
  If this is the first time, you install Palm desktop and encounter a problem, go to the previous step. If you are not concerned about your data at this stage, go to the next step.
  
  Now, you want to uninstall Palm Desktop and remove anything that has to do with Palm Desktop on your computer. Go to the following locations on the PC and delete the folders listed below. [C:\Program Files\Palm or C:\Users\[Vista Palm connection name] \appdata\local\virtualstore\Program Files\Palm or PalmOne C:\Users\[Vista Login Name] \appdata * note you may need to show hidden folders to join appdata. To do than to go into your control panel and open folder options. Go to tab and uncheck hide hidden files.
  
  When you use Palm desktop 6.2, look in my documents or documents and delete the folder Office of PalmOS. It is the location of the PD 6.2 data files.
  
  Once this is done, you will need to remove certain keys in the registry of your PC operating system.
  
  Word of warning, go here and removing the wrong thing can cause your PC to start, crashing and deletion of programs and data. If you feel that you are not sure of yourself, see if you have a friend who can help you or a PC technician that you can pay to help you. This procedure will show them everything they need to remove. To make sure that we have a good copy of the current registry, we make a backup of the registry.
  
  Go to start on your PC in the search box type "regedit.exe" without the quotes.
  
  Point peak COMPUTER, go to file-> Export. Should appear with a save as box. Current place of residence is fine, must be within My Documents, or save to a location that you will remember. In the name of the file in low type "backup [todaysdate]" i.e. backup07072008. Then, the most difficult part.
  
  The best way to ensure that your work with the right key, select the key that is installation quick palm and press delete on your keyboard. You will be asked, you of course. Say Yes. Do the same for all the keys below.
  
  If you make a mistake, stop what you are doing. And call a PC technician. BUT do not turn off your computer.
  
  The reg keys are as follows (Note: some of the theses reg keys will not be here, but if they remove them)
  
  * HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install * HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer * Robotics\Pilot Desktop HKEY_CURRENT_USER\Software\U.S. * HKEY_CURRENT_USER\Software\Palm * HKEY_CURRENT_USER\Software\Palm, Inc. * HKEY_CURRENT_USER\Software\PalmDesktopAutorun * HKEY_CURRENT_USER\Software\palmOne * HKEY_CURRENT_USER\Software\PalmSource * HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
  
  Then, restart your computer.
  
  Then, reinstall your Palm desktop from the CD and do a hotsync. If request you a user name, enter the name that is on your device in the upper right of the screen to hotsync.

• Palm Desktop 6.2

  I recently installed Palm Desktop 6.2 on my Windows 7 PC but I am only able to see the media, there is no Memo Pad, address book etc. How to see these?

  Try this trick: right click on the shortcut for Palm Desktop and choose 'run as administrator '.

  Turning off User Account Control (UAC) can sometimes correct this situation also.  Control Panel/users/disable UAC.

  WyreNut