I can not connect my printer to the new laptop. main computer ___my's upstairs

Similar Questions

• connection printer to the new laptop

  My printer is connected to the wireless network, but I try and put it on my new laptop (windows 7), that it says cannot find every time. I checked that all on the same network and they is, firewall off as well - so frustrating

  How to connect existing printer for the new laptop?

  I'm sorry you have a problem with the communication of the printer and the computer.

  Try disabling your anti-virus.

  In addition, run the doctor print and scan and check the results.

  http://support.HP.com/us-en/document/c03275041

  Let me know what happens.

• How can I install CS5.5 on the new laptop computer?

  How can I install CS5.5 on the new laptop computer? I do not have the actual CD because I bought the downloadable version, but I have the serial number. I bought 4 years ago.

  Thank you!

  Hello

  Please Download CS5.5 products

  Kind regards

  Sheena

• My TimeCapsule airport can not find my printer via the USB port

  Hello.

  I have a HP Laserjet cp1215.

  I had to reset my TimeCapsule because my Xbox has an update and will not connect to internet.

  Then theres no reaction when I connect my printer to the TimeCapsule.

  Any ideas?

  Thank you

  When you reset the TC which settings you changed?

  Have a different IP address?

  Remove the printer to the computer and start the installation... If the TC changes IP it can mess up the connection.

  In the contrary case, we need a lot more info about what happened and your entire network. Printers can be extremely difficult to get running... the end plug it into a computer as it was designed to be... A USB printer is not network... and no USB print server cannot overcome the fundamental nature of the printer... It is designed for local use. Ultimately, that he will always give you problems.

• Printer Envy 5530: why I can not connect my Macbook on this new printer? Download HP and Apple and disc. NO.

  My HP Envy 120 died today after only 13 months. Bought the 5530 want to replace. My Macbook running lion 10.7.9 impossible to install the software of Apple, HP or the disc drive. Please someone tell me what to do. It seems crazy that each site recommend one for download. If the download n 't possible that they would be kind enough to give me an error message. life is too short for all that. Have installed ink cartridges, but will be back tomorrow if I can't make it work. Need a printer! Thank you very much for ANY help! Very grateful in advance.

  Hello @Islandedisto,

  Welcome to the Forums of HP Support!

  I would like to help you today with the installation of your new HP ENVY 5530 e-all-in-one printer on your Mac OS X 10.7. There is a chance that the old remains of your HP Envy 120 drivers cause a conflict when you try to install this new printer Envy. Can I please have you follow the steps below to solve these conflicts to occur.

  Step 1: Resetting the printing system:

  To begin, I will have you reset the printing system on your Mac because it is important that we have a pleasure to work with for troubleshooting clean slate. Please click herefor instructions on how to perform the reset. When the website opens, follow the steps under 'Reset the printing system in OS X Lion'. This Reset deletes each printer on your Mac. However, it does not uninstall printers. Therefore, if use you other printers on the Mac, once the reset is complete simply make sure printers are attached via a USB cable or connected network and (+) add hide them in. do not add your HP Envy in at this time.

  Once the reset is complete, proceed to the next step.

  Step 2: Uninstall the drivers and software:

  Please click here to find out how to properly uninstall your printer. Once the site opens, select the drop-down menu 'Mac OS X v10.6, OS X v10.7, OS X v10.8 and OS X v10.9' and follow the steps to complete uninstallation. This should clean up any software and drivers for your old HP Envy 120 institutions.

  Once the uninstall is complete, please continue on.

  Step 3: Check and repair your Mac disk permissions:

  1. Open Macintosh HD and go to Applications
  2. Go to the Utilities folder
  3. Open disk utility
  4. Select the hard disk volume, you use (usually on the left)
  5. Select verify disk permissions
  6. Once this process is complete, select repair disk permissions

  Step 4: Check the Apple updates: 

  1. Go to the Apple
  2. Select System Preferences
  3. Select software update
  4. Click update now
  5. Install your available updates
  6. Computer restart

  Step 5: Install the drivers:

  1. Please click here to download the latest full-function software package and the driver for your printer
  2. Once the site opens click on the download button at the top left
  3. Once the download is complete, follow the steps on the screen to install your new HP Envy

  Once installed successfully, your HP Envy, please try printing and scanning to ensure the full functionality of the product.

  Please reply to this message with the result of your installation. I look forward to hear from you!

• Suddenly, I can not connect to printer on home network wireless.

  I have a Pro L7680 Officjet and we have a new installation of cable company in our House. We have 2 laptops and 1 desktop. All three share this printer and we had no problem. Since the installation, 1 laptop connects to the printer. Support cable co. was not able or willing to help, saying: it's not their fault. I get a message that the printer is offline, when other computers have no problem printing.

  On the problem computer, go to control panel > printers and delete all instances of the printer.

  Then, print a network Test Wireless at the front of the printer (network menu).  Note the IP address of the printer.

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing.
  2. click on > start > Control Panel > printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• I can't connect to my mac because the SHIFT key is down. Then he showed the top letter and can not connect... The mac is also overheating. I went to the apple store and they said that they cannot fix and need to send to the factory. Connection of same slo

  I just used my mac. I bought it on January 2014.

  A few months ago I couldn't connect to my mac more. There is nothing special on my mac to record.

  He was showing the wrong password when I tried to connect to my mac. It is overheating sometimes without help.

  So, I brought it to the apple store and they said that the shift key is down and therefore superior letter is all the time. and they could not help me open on the inside. Apple store guys suggested me to display somewhere or send it to the factory.

  My question is

  (1) what should I do

  (2) if I send to the factory or should go to the repair shop.

  you guys have an idea what the problem with my mac?

  I suggest you send to the factory, or if you have an apple authorized dealer / repair shop to fix the SHIFT key first, then a glance as to why the fan is still running hot.

  Maybe something has damaged the keyboard (shift key) area and also the fan internal.

  You can't have something special on the computer, but I'd always spend extra money to repair.

  The sooner, the better.

  If you need take photos or documents off the power the computer have you tried to connect an external keyboard to type your password?

• HP Officejet 5740: I can not connect my printer firmware update site

  Like one time, I put a password on my site Admin for my printer. I tried a network definition reset to remove the password, but it's still there.

  What should I do to remove the password from the server web embeded?

  Welcome to the HP Forums @ConTho!

  I'd be happy to help you to get an update of the firmware and reset the password admin for Officejet 5740.

  We will need restore your default network settings to reset the admin password. You can access the Menu on the front panel of the printer wirelessly and locate the default network option here.

  Also, here is a link that you can use to download and install the latest firmware update if your printer is not already aware: series printer e-all-in-one HP Officejet 5740 Firmware.

  If this resolve your request, please click Accept as Solution button below. If you need help, let me know and I will do everything I can to help.

• Can not connect Equium M70 to the Internet via an Ethernet cable

  I have recently install wide telewest broadband via the installation disc. I used the provided ethernet cable. During installation, I received an error message stating that it could not connect due to various problems.
  After a long discussion with the customer service and try several solutions over the phone we wouldn't always get connection using the ethernet cable.
  Telewest has also provided a USB cable so I was told to remove the ethernet connection and plug in the USB. The connection has been made instantly.

  Has been informed by the technical support of Telewest, that I had a problem ethernet on the laptop. This could be correct, or maybe it was an ethernet cable from the spleen.
  Any suggestions? My laptop is only four months.

  Hello

  It is not easy to believe that the network adapter does not work on your laptop. What is the status of LAN in Device Manager? When the cable is connected is the assets of orange or green led or not? Try also to start ConfigFree tool. Under the physician connectivity tab, you can see their actual situation and if there is a problem of communication it will be shown here.

  If there is any attempt of trying to test it on another network (perhaps in your company).
  You can also contact your dealer and allow it to check the device. It can be done in the store and may not take a lot of time.

• I can not connect with iCloud in the iPhone 4S.

  < image published personal information >

  Unfortunately once all accounts iCloud 3 were created on your device, you can not create more little matter what you do. You will need to re - use one of the accounts that you have already created or create your account on another iOS device or computer Mac.

• forget password and I can not connect wifi to reset the password

  Hello

  I forgot my password after changing to connect to my computer and I can't connected to wifi to reset the password

  I need to lose my everything on my Imac with nothing

  What should I do?

  An apple article is here: change or reset the password of a user account from OS X - Apple support

• 8500 getting wrong ip address - can not connect or print

  The installation of my new 8500 (A909a) is going very well - and I was able to print correctly.  24 hours later (after the printer was turned off or gone to 'low power')-j' was able to print is no longer.

  Have you some troubleshooting - and the strange thing I noticed is that the IP address of the printer in the Network Configuration Page is 169.254.45.149.  The computer and the router signal that IP address should be 192.168.0.127 (all other devices on my network have addresses of 192.168.0. *-According to the DHCP of the router settings).

  I even tried to set the IP, subnet mask and the gateway to the values I think that the router waits (192.168.0.127, 255.255.255.0, 192.168.0.1 respectively) - and still no luck.

  I restarted the router, PC and shut off/on the printer - still nothing.  And I can't ping the IP address of the printer in either case (169.254.45.149 or 192.168.0.127).

  8500 is related to a wired to a wireless DLINK Dir625 router.

  I am running Vista if it's important.

  Where it becomes the 169.254. *. * IP address - and more importantly, how it be reconnected?

  Thank you in advance!

  Book an IP address of your router for the printer (probably 192.168.0.127).  Stop the router and the printer.  Then restart the router, wait, then restart the printer.

• How can I connect Epson R1800 with the new iMac?

  Older to make sure printer, but it is good quality and I have a lot of ink and the large photo paper I want to use up. The printer is connected to my iMac plus old (2009) with the cable provided with the printer and an ethernet (Sonnet simply fast) adapter. It seems that the new iMac is a 10/100/1000BASE-T Gigabit Ethernet (RJ-45 connector). Although my Sonnet connector seems to fit in the port, I can't get the computer to recognize that there is a connected printer. Until I can do that, it seems that I can't download the printer driver and everything what I need Epson. (Old iMac died, failed to retrieve the latest driver from there).

  So do I need a different Ethernet adapter? Alternatively, I have USB ports available, how to connect to the printer with a USB connection?

  This printer has a USB port so just connect with a USB cable to the USB port on the iMac.  Download and install drivers from here: printer drivers Epson v3.2 for OS X.

  After installing drivers go to Scanners & printers/system to complete installation.

  Printer is supported you in accordance with this Apple document: printer and scanner software available for download for your Mac - Apple Support

  

• can not connect wireless or implement a new file network xwizard.dll error

  I just moved and can't set up a new home network or to connect wireless

  It shows available wireless and when I click on connect to the network, nothing happens

  When I try to put in place the new network with the Network Wizard it gives an error of xwizard.dll

  I have tried everything I can at this point and I am at a total loss of figure

  Hello

  Assuming that wireless router is configured correctly, it is a signal and the wireless card on the computer is physically in.

  Maybe this can help.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  To ensure that if there is Wireless Utility a seller is not running with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd AV/Firewall/security software part, s costume keep blocking aspects of Local traffic even it they are off (disabled).

  If possible set up the firewall correctly, /Security costume otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

• How can I set up lightroom on the new laptop computer with SSD?

  I just got a new laptop from ROG from Asus with an SSD. I need help setting up lightroom. Should I keep my catalog of lightroom on drive C or move it to the D with all my Docs and Images?

  your catalog and images can be anywhere.  You cannot change the installation of your drive c. Lightroom and creative Cloud FAQ directory