can not connect wireless or implement a new file network xwizard.dll error

Similar Questions

• new router and can not connect wireless

  Installed a new router that has changed my a WEP to a WPA2 security. I connected to the printer (7410) via ethernet cable and changed the security settings, but the printer will not connect to my router. I'm printing directly connected ethernet cable on the router. When I try to use the interface of the printer to cinnect to the router the only option that appears is WEP.

  Any ideas?

  Thanks it worked perfectly for me!  Sorry, your options appear on the screen for you, but they did it for me.

  Just make sure you change your new router wireless to the first WAP and it should work fine.  No need to reinstall any software or drivers as some previous posts said.

  Go to: network, Wireless Setup Assistant, (I had to scroll down to the second page to find where to enter my new network name) and enter the new network name configured on the router.  I changed my network name of the WAP2 name that I had originally put in place, so it was easier to distinguish that one has on the WAP.  Enter your WAP password and you should be good to go.

  I use a wireless router Netgear on a Windows XP operating system.

• HP Photosmart B109n-z can not connect wireless

  Sorry for my bad English (I'm from Belgium)

  I bought a Hp Photosmart printer and I can't connect to my router!

  I tried severell times, but nothing has worked

  I did everything as in the video and when it tries to download router configuration message appears it can not find the

  the router and the SSID.

  Networksetup program is allso connect to my router (even with the right user name and pasword)

  Allso the program USERHPNDU cannot find anything (no SSID, no WEP, no printer key)

  My pc is connected to my router with an ethernet cable. The system is win xp home sp3

  Router Linksys WAG160N IP is: 192.168.1.1

  I even disabled my firewall and no go!

  Networkconfig page: any IP address

  TestPage wireless network:

  -Wireless on: pass

  -Wireless function: pass

  -SSID: failure

  -Security: pass

  -connected: unfinished

  signal strength: not completed

  On the bottom of the page networkconfig is printed that he had found the SSID of my network!

  Now, my printer is connected to a print server and works fine but I want to connect wireless!

  What is the solution?

  Thanks in advance,

  Paul

  Thanks for your suggestions; It solved my problem

  changed from WEP to WPA and it works

  Thank you very much

• I had a change in router and now I can not connect wireless network printer

  HP Deskjet 3050 has

  Windows 7

  I got a router change and now can not conect my printer on the wireless network. What should I do?

  Hi MaggieS, this support document provides suggestions for the correction of a reliable wireless connection. Try to work through them in the order of presentation and do not hesitate to post back if you are still not able to get connected http://support.hp.com/us-en/document/c02817031

  All the best.

• I can not connect my printer to the new laptop. main computer ___my's upstairs

  I can't connect to my printer which is on the floor with my main computer.

  Here is a tutorial on how to set up a home network (including a wireless)-click on additional links for more information that may be helpful:http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network.

  Here is an article on troubleshooting network connections wireless (with links):http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-network-connection-problems.

  This is a long article by Microsoft on the file and printer sharing which will probably provide information that will help solve your problem:http://technet.microsoft.com/en-us/library/bb727037.aspx.

  I hope this helps.  If no, please provide further information on exactly what problem you are having, what messages you have found (the word EXACT text), exactly how you try to configure the connection (which specific procedure you follow), the printer said after the connection attempt is made (if you even get here), these two computers operating systems (including versions) , the manufacturer, the brand and the model of the printer and any other information you think might help us help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• OfficeJet 5740: Cannot print duplex automatically and can not connect wireless

  So, I recently bought a new laptop for academic purposes. Back in September, I bought the HP Officejet 5740 because it could print wireless and can print double sided also.

  Everything worked perfectly fine when I was using Windows 8. In microsoft office, that I could see the option to print double-sided and had no difficulty, printing or the connection to the wireless printer.

  Then, I upgraded my computer to windows 10. I downloaded the hp driver and tried to add the printer several times and did not get it to connect successfully. Moreover, I see more two-sided printing option. I have the option to print one, or to manually return the documents to make it double sided.

  I downloaded the driver installed the printer and uninstalled the printer a LOT, a LOT of time with nothing doesn't. Please help me. I really only print in powerpoint and word, so it is very important to have this ability.

  For the connectivity problem, I would say the Print and Scan doctor, you can download it from HP to http://www.hp.com/go/tools.

  For the duplex issue make sure the duplex module is selected.  Click on start, devices and printers, click with the right button on the Officejet 5740, select printer, device settings, both installable and set properties automatic duplexing on installed unit, apply, OK.

• Printer Envy 5530: why I can not connect my Macbook on this new printer? Download HP and Apple and disc. NO.

  My HP Envy 120 died today after only 13 months. Bought the 5530 want to replace. My Macbook running lion 10.7.9 impossible to install the software of Apple, HP or the disc drive. Please someone tell me what to do. It seems crazy that each site recommend one for download. If the download n 't possible that they would be kind enough to give me an error message. life is too short for all that. Have installed ink cartridges, but will be back tomorrow if I can't make it work. Need a printer! Thank you very much for ANY help! Very grateful in advance.

  Hello @Islandedisto,

  Welcome to the Forums of HP Support!

  I would like to help you today with the installation of your new HP ENVY 5530 e-all-in-one printer on your Mac OS X 10.7. There is a chance that the old remains of your HP Envy 120 drivers cause a conflict when you try to install this new printer Envy. Can I please have you follow the steps below to solve these conflicts to occur.

  Step 1: Resetting the printing system:

  To begin, I will have you reset the printing system on your Mac because it is important that we have a pleasure to work with for troubleshooting clean slate. Please click herefor instructions on how to perform the reset. When the website opens, follow the steps under 'Reset the printing system in OS X Lion'. This Reset deletes each printer on your Mac. However, it does not uninstall printers. Therefore, if use you other printers on the Mac, once the reset is complete simply make sure printers are attached via a USB cable or connected network and (+) add hide them in. do not add your HP Envy in at this time.

  Once the reset is complete, proceed to the next step.

  Step 2: Uninstall the drivers and software:

  Please click here to find out how to properly uninstall your printer. Once the site opens, select the drop-down menu 'Mac OS X v10.6, OS X v10.7, OS X v10.8 and OS X v10.9' and follow the steps to complete uninstallation. This should clean up any software and drivers for your old HP Envy 120 institutions.

  Once the uninstall is complete, please continue on.

  Step 3: Check and repair your Mac disk permissions:

  1. Open Macintosh HD and go to Applications
  2. Go to the Utilities folder
  3. Open disk utility
  4. Select the hard disk volume, you use (usually on the left)
  5. Select verify disk permissions
  6. Once this process is complete, select repair disk permissions

  Step 4: Check the Apple updates: 

  1. Go to the Apple
  2. Select System Preferences
  3. Select software update
  4. Click update now
  5. Install your available updates
  6. Computer restart

  Step 5: Install the drivers:

  1. Please click here to download the latest full-function software package and the driver for your printer
  2. Once the site opens click on the download button at the top left
  3. Once the download is complete, follow the steps on the screen to install your new HP Envy

  Once installed successfully, your HP Envy, please try printing and scanning to ensure the full functionality of the product.

  Please reply to this message with the result of your installation. I look forward to hear from you!

• I have a laptop with Windows XP. After getting a virus, I scanned with AVG and removed the threat. After re-booting, I can not connect to wireless internet.

  I have a laptop with Windows XP.  After getting a virus, I scanned with AVG and removed the threat.  After re-booting, I can not connect to wireless internet.  The icon shows "acquiring network address".  I connected the router directly on laptop computer connected to the wireless network and still unable to connect.  I tried to restore the system as well, but the message says "unable to restore the system, no changes were made.  Help?

  original title: acquisition of network address

  Hello, Steve.

  Try this link below on how to reset IE and let me know if it helps.
  http://support.Microsoft.com/kb/923737

• I have been connected to the internet (wireless), then I unplugged the router and now I can not connect to internet. I tried diagnose the problem, but he said that he could not.

  I have a wireless internet connection for my laptop. I was connected to the internet, and it worked very well, so I had to unplug my router and all of a sudden I can't connect to the internet more. When I open the available networks, I hit connect on mine and he said: it does not work then I hit "diagnose the problem" and then, he says he can't. Also it is not even give me the option to set my password to connect to my network, but it does when I try to connect to any other.

  I suggest to unplug all your network cables and unplug the adapter from your modem AND router. ONLY plug your modem back power adapter in. Wait until you get a steady green light on your router, which indicates that it is ready. Then, connect the ethernet cable from your modem to your router INTERNET port. Connect the ethernet cable from your computer to any other ETHERNET port on your router. Finally turn the monitor for your router.

  If you do not do so in this order, the router can not connect properly to the internet because it doesn't have the correct IP address of your modem.

• I HAV HAV problem I can not connect my tag because because page that I move to Puerto Rico in new York and my password and imail are in are in boxes storge away

  And I can not connect and I want to know if my story of my page on tagged 2013 posible I see see it connect... Thank you for your support...

  I understand that the passwords and email are stored away and you try to access a login page. It is possible to reset the password if the email offers that.

• Laptop will NOT connect wireless, my drivers ARE up to date

  My Windows Vista laptop, USED to connect to my router wireless very well. Now it won't, it doesn't even recognize that a network is available. I looked for answers and have updated all my drivers on windows suggested and still not connect wireless. My blackberry to connect to my router very well... Help, please!

  Hello

  Turn off the router and the Modem - wait 3 minutes and reverse. Restart the computer.

  Some systems have a power switch on the front or side. If a laptp or a PC that uses embedded
  WiFi check/configuration settings (BIOS/CMOS) as you start - often F2 then warning screen - select-
  boar without wireless/WiFi. If the PC of a kitchen separated and system maps turned OFF and try to remove and
  replacement of the card - in fact remove - do not just tight.

  A manual update or re - stall your drivers by using these methods, do not use only the driver update as
  You must refresh the batteries of any driver.

  Actually try updating your driver and disabling the network logon. Use a wire or download drivers
  on another computer and use removable media to transfer to your system.
   
  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Can NOT CONNECT to PC RUNNING WINDOWS 8 - only "your PC is offline.". Please sign in with the last password used on this computer. »

  I'm so angry. I did everything and I can't connect my new pc Windows 8! I live in New Jersey and set up my network connection there, but I'm going to school in California (where I don't had not set up a connection without wire/local). I have configured my pc via a microsoft account and now it does not allow me to log in because I am not connected to the internet and can not connect to the internet. I can not update/use command prompt to connect to the wifi/etc. because all actions require my password. I even tried to use an Ethernet cable. Nothing works! He always says "your PC is offline.". Please sign in with the last password used on this computer. "I HAVE NOT CHANGED MY PASSWORD! and my account has not been hacked. This problem is simply my inability to connect to the internet. It's BS. Microsoft, you better come up with a fix for this young! If anyone has found a solution to this problem, please answer! I have very important files/software that I can't simply delete. This bug is much too big for Microsoft to miss and should be fixed immediately. How am I supposed to use this PC for school?

  But... In order to implement a local account, you must first connect to the Microsoft account that brings back us to the same error.  I had this problem as well and he needs to be addressed.  Whenever you walk away a network before installation on your PC/laptop, you will have this problem.  Try this... turn off PC/laptop, then go to another computer and sign in to Microsoft Web site account.  Connect with an Ethernet cable and turn on your PC/laptop with the connection problem and try to connect again.  It should work.

• I can not connect to Messages or FaceTime on my iPad

  I can't log into Messages or FaceTime on my iPad.

  I can connect in iCloud with my Apple but not Messagess or FaceTime.

  I've updated to 9.3.4.

  I recently received hundreds of emails from some Asian spammer all at once. I think that my message of account has been hacked or something. I tried to connect to remove them, but I can not connect now.

  I tried restarting and also did a reset a deletion and restoration, but nothing seems to work.

  I also rest my Apple ID several times with new passwords etc, but nothing works.

  SUggestions?

  Hello, Randy Burleson1,.

  Thank you for using communities of Apple Support.

  If I understand your message that you are not able to connect to iMessage or FaceTime on iPad Air. I like to use iMessage and FaceTime myself, so I want to help you as best I can to solve these issues. I recommend first of all, by ensuring that your Apple ID works correctly. To do this try logging on to appleid.apple.com from your browser.

  If you succeed, then on your iPhone go to settings and Messages. Scroll down and click on the section titled send / receive. If you are connected to the iMessage you will see the words Apple ID and email address. Type your address email Apple ID, click Disconnect.

  Once out of the faucet, use your Apple ID with iMessage and enter your e-mail address Apple ID and password.

  Repeat the same steps with FaceTime.

  If you receive error messages, please respond and let us know what you receive error messages.

  Best regards

• I can not connect on firefox?

  I recorded with Firefox and got the activation letter, went through all the
  steps and I still can not connect. Can someone please fix cela asap?

  Do you mean that you have created an account on support.mozilla.org? Have you created a new account to post this?

• Satellite Pro A100: Why can not connect Internet with the net card

  I can't connet Internet whith this net card, but I always connect it with a wireless network card

  Hello

  I put t know why you can not connect to the internet, but we need to study a little.
  Have you checked if the network card has been properly installed? The network adapter appears in Device Manager correctly?

  What do you use to connect to the internet; Modem or router WLAN?
  Have you checked the TCP/IP protocol if the IP address setting has been configured to automatically get?

  Check if there is an active firewall

  As you can see, there are a lot of restrictions and everything must be checked!