I can not save or print a quark 6 file in Windows 7
I tried to update the drivers (in windows 7) and nothing has worked. I also tried to install the VM from sun and I am able to save my quark file, but are still unable to print.
Help
You do not say that if you have checked to see if Quark 6 is compatible Windows 7, Quark 8 is the current version, then I suggest that you check with them to http://www.quark.com/ to see if a) Wuark 6 is compatible or b) if upgrading to Quark 8 will work.
Tags: Windows
Similar Questions
-
I can not save or print with Illustrator CS3
Illustrator CS3 worked fine on my old laptop... until the death of this laptop.
So, I installed it on the laptop replacement, but I can't save or print my work, making the program useless.
I can open documents very well and do all the work I want to without any problem, but it is not good if I can't save or even printing.Windows X
Thanks for any expert help on this!
How can I live without Illustrator?Run the program in compatibility mode Windows 7 and check your file permissions and user privileges are sufficient.
Mylenium
-
Why I can not install my copy of Quark Express 5 in Windows 7?
I try to install my old copy of QuarkXpress 5 on my new computer with Windows 7. The installation is very slow getting started and if it does not start, nothing happens. I'm assuming that Windows 7 does not like some legacy software.
Hello GPW4YSP,
If the program is not compatible, then you try to install and run the program in compatibility mode.
Use the following steps:
(1) right click on the program
2) click Properties
3) click on the Compatibility tab
(4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.
Check out the link here: make sure to run older programs in this version of Windows
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
If you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.
If you run Windows 7 Home Premium, try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other software virtualization part 3rd and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.
Thank you
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
I CAN'T SAVE MY PRINTER - IT DOES NOT ACCEPT THE SERIAL NUMBERS I SUBMIT
I GOT MY PRINTER I BOUGHT LAST AUGUST 2013, IT HAS WORKED WELL FOR AWHIKLE, BUT AFTER HAVING PUT THE INK BACK IN DECEMBER 2013, HE STOPPED TO LISTEN TO MY INSTRUCTIONS. IT SHOULD SCAN FOR ME AFTER A LOT OF TESTING, BUT IF I FOUND A RECIPE THAT I TRIED TO PRINT, IT WOULD'NT DO. HE PRINTED WHAT EVER HE WANTS TO DO. I DID HAVE A LOT OF TIME TO GET ONLINE AND DISCUSS THIS PROBLEM WITH YOU, BUT TODAY I THOUGHT I WOULD START FRESH BY REGERISTING MY PRINTER. I REFUSED SIDE SO I COULD READ THE NUMBERS ON THE LOWER PART OF THE PRINTER THAT ARE IMPOSIBLY LOWER CASE, WITH THE HELP OF MY GLASS MAGNIFYING I SAW TWO NUMBERS DIFFERENT, ONE IS CZO44-80020 THE OTHER IS CZO44-80012. THE RECORD WOULD NOT ACCEPT A NUMBER; SO I CAN NOT SAVE MY PRINTER AND GET STARTED ON ALL THE PROBLEMS THAT I ENCOUNTER WITH THIS PRINTER. ALL I WANT IS to BE able to PRINT the RECIPES OR ARTICLES THAT I ADMIRE, NOTHING's TOO COMPLICATED - SO PLZ HELP me USE MY PRINTER HP DESKJET 3511e-All-in-ONE SERIES. Thank you
NORMA [edited]
Here, the document shows how to locate a serial number on your 3511e Deskjet.
-
In Adobe CS6 on a PC I can not save the file as an EPS file. I reinstalled the software and made a new document with a simple square in the file, but the error remains. I can save the file to any other format except in EPS format. The error window I said "can't save the picture. Cannot print the illustration. »
Illustrator needs a printer.
If you haven't set up the print to PDF format or something in the system.
-
I just downloaded Adobe XI on my macbook air, and now I can't save or print the PDF files. Don't let me do print - save as PDF, and if I do record as I get a message indicating that the file is corrupted. I had NO PROBLEMS of all do this several times until I downloaded the new version. I uninstalled and reinstalled it, nothing helps. I am super frustrated.
lrfrustrated wrote:
I just downloaded Adobe XI on my macbook air, and now I can't save or print the PDF files. Don't let me do print - save as PDF, and if I do record as I get a message indicating that the file is corrupted. I had NO PROBLEMS of all do this several times until I downloaded the new version. I uninstalled and reinstalled it, nothing helps. I am super frustrated.
Print > save as PDF - use an excerpt (part of Mac OS X), so Adobe Reader should have no effect on that at all.
As for the error "file corrupted", simply uninstall the Reader app will not affect it. Follow these steps:
Mac/HD/Library/Internet Plug-ins
Trash the files AdobePDFViewer.plugin and AdobePDFViewerNPAPI.plugin
Mac HD/Applications
Trash the application Adobe Reader
[user] / Library/Preferences
Trash the com.adobe.Reader.plist file
To access the [user] / Library, hold down the 'Option' and click on 'Go' in the FInder menu.
Mac HD/Library/Application Support/Adobe
Trash the drive (full record)
Empty the trash.
Download the installer FULL here: http://get.adobe.com/reader/enterprise/
Quit your browser, and then reinstall the drive.
Run it from the Applications folder and agree to the license agreement.
You should have no problem with Safari PDF files download.
Unfortunately, ANY PDF file that says it is damaged.... You will need their trash.
-
I can not save the background sound on R500 27175GU
Hi all
I've been looking for a solution for a long time but no answer. My laptop Lenovo R500 27175GU, OS is XP pack 3. Audio device is Conexant 20561 Smart Audio HD. The problem is I can not save the background music but can record microphone (IE I can not record sound from the speaker). When I explore the Volume control, I see that I have just two mixer device: Conexant HD Audio Output, Conexant HD Audio Input. When go to Conexant HD Audio Input, I have only microphone for recording. Can anyone help me solve this problem so that I can record the speaker, please let me know.
Thanks in advance.
Because your laptop is not the software that does what you want.
-
Can not install the printer driver. Error code 0 x 0000490.
I have Windows Vista and I have a printer HP 3512. For some reason, I can not install the printer and I keep getting an error 0 x 0000490. Help, please?
Moved from Vista to install, upgrade and activate Forum.
Hi Courtney,
Please contact the Microsoft Community.
I'd like you first try printing HP and doctor Scan.
http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c03286146
After that, I would have you to refer to this article-
We know if that helps your cause.
-
My printer is not displayed and I can not open my printer spool for repair.
Original title: my printer is not displayed and I can not open my printer spool to fix, how do I solve this problem?
My printer is missing, when I try to open my printer to print something I get an error message saying to restart my printer spool and I when I try to open my printer spool window is empty. My printer isn't appearing any more, all of a sudden I can't print more.
Hello
- You did any recent changes that caused the problem?
- What is the brand and model of the printer?
- What is the exact error message?
Method 1) run the printer Troubleshooter
Solve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
Method 2: Follow the instructions in the link:
Printer in Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
It will be useful.
-
Original title: * e-mail address is removed from the privacy *.
To try to save, basic OS Wndows Vista on DVD - R 16 X, received the 0x4ff02 error code. Therefore, can not save OS.
Hi Brad blair,.
· What is the full error message?
· You did changes to the computer before the show?
Please check the error code that you provided as it seems to be incorrect.
Follow the suggestions below for a possible solution:
Method 1: You can try to perform the backup on a different DVD and check if it works.
Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.
You can also see the following article for more information on the backup:
Back up and restore: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions
Let us know the results.
-
New hard drive installed Vista Ultimate, now I can not install my printer - why?
Computer Dell laptop hard drive replaced (warranty) with Vista Ultimate, I installed Office 2007 Professional disc 1 fine, windows update is fine, but I cannot complete the installation for my Kodak printer disc. Has been given the Internet to install via the internet address - link doesn't work either - drive flashing green bar "installation preparation" then nothing? Link Web shows 'Preparing to install' with a full bar green - then stuck there. A few minutes later, he disappears. Never installed. Do not open the drive or cross the bar - never open the Green window to install. Support Kodak decided that I was missing the .net on pre-installed OS HDD framework files. Enough of 3.45 and 4. Is this correct? Do I need previous versions, or something else is the cause. How can I check to see that all the files are correct and understand WHY I can not INSTALL MY PRINTER?
Until the hard disk, memory & the keyboard have been replaced by the Dell tech, I had installed and printed on this Kodak printer for 9-12 months. Suggestions welcome.
Hi LSMama,
(1) you get an error message?
(2) what is the model number of your printer?
There could be several causes for this problem, try the following steps:
Step 1: Run the troubleshooter printer available in the link below and then check
Solve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
Step 2: Clean boot the computer and then try to install the printer
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
*************************************************************************** -
I can not save pictures it says access denied
I can not save pictures it says access denied
In which folder you are trying to save the images (full path name please)? It is C:\Users\
\Pictures (which shouldn't give you a permissions problem, but it is possible) or is this another place? Also, when you try to save pictures of (full name of path please)? It's probably just a permissions problem. You must grant you full rights and eventually take charge of this issue (or perhaps its parent or both folders if the permissions are inherited). You may also use the advanced feature to adjust the special permissions that can be liimiting described on the homepage (it depends on the folder and what permissions are). Here are some general guidelines for changing the permissions and/or ownership. To view your permissions, right-click on the file/folder, click Properties, and check the Security tab. Check the permissions you have by clicking on your user name (or group of users). Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions. You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).) Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/. To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.
To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights. Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab. Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK. Back and now there is a new owner for files and folders/player who can change the required permissions. Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html. To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Original title: Windows 7 Installer error 1907
How do I fix this"error 1907. Can not save the fonts. Make sure you have the necessary permissions to install fonts
Hello
1 does with a particular font or it occurs with all fonts?
2 is this problem limited to the installation of fonts?
3. you are an administrator of this computer?SFC scanner. Analysis (sfc) System File Checker will Windows replace corrupted or missing system files on your computer.
Scan sfc enforcement procedure:
a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
b. click on continue or provide administrator credentials if prompted.
c. in the type in the following command prompt window and press ENTER:
sfc/scannowRefer to this article for more information:
http://support.Microsoft.com/kb/929833 -
Can not install the printer driver that nothing works
I have a new HP 1102W and brand new emachines running windows 7 and I can not install the printer driver up constantly mistake spent 2 hours on the chat online with an HP technician.
Try the drivers for the LJ 1100. Use the Add Printer Wizard and choose to install the Windows update driver.
Tom
-
Using window 7
I can not save file in the drive of the flesh
I can't edit a file existing in the drive of the flesh
Nothing to do with win7, assuming that your usb ports do not work.
You should not change the files stored on a USB key, flash drive is a temporary location and must be used to move files.
Not all flash drives are equal, some are allmost gave, perhaps your failed.
Maybe you are looking for
-
Installed A module Bluetooth C850-1 kN satellite?
This model has a bluetooth module is installed: C850-1 satellite kN PSCBWE 0D0000NEN Device Manager displays a list, but my phone does not see the laptop See you soon Greg
-
Satellite A300D-17F - upgrade graphics card - possible?
I have a Toshiba Satellite A300D-17FIs it possible to install a new graphics card, the vehicle currently has a mobility radeon HD3650 512 MB DDR2 graphics cardWhen I opened the laptop I see that my video card is not built in.I want to improve whit th
-
Media Player - can't burn DVDs its request to connect a burner?
I can't burn DVDs of windows media player to drive in the drive, it says to connect a burner and restart?
-
My dell inspiron N4010 intel core i5 inside, Ram 2 GB, ATI mobility Radeon HD 4570, appears blue screen and reboot... then reported any problem as follows. I am running Window 7 32 bit recently installed service Pack 1 (this is perhaps a cause? but I
-
(Redirected) Terrible Customer Service-Assistance is requested
I ordered a TV last week and he received Monday. The box was damaged. I sent an email to Dell and I have yet to receive a response. I was on a chat session where I had to wait 1 hour, automated message came this Department was closed. I called De